Appendix I - Examples of Hazardous Materials.pdf
PDF 146 KB Posted
- Attached to
- 99 LRS Packing & Crating
- Solicitation number
- FA486124R0023
About this file
This document is an Appendix to the Defense Transportation Regulation that provides examples of hazardous materials, including combustible liquids, corrosive liquids, explosives, flammables, compressed gases, aerosol cans, chlorinated hydrocarbons, and other regulated materials. It outlines specific requirements for the transportation and handling of these hazardous materials, such as container size limits, purging and draining procedures, and packaging and labeling instructions. The document serves as a reference for individuals and companies involved in the transportation of personal property that may contain hazardous materials.
The related federal contract opportunity is a solicitation from the Department of the Air Force Air Combat Command for Packing & Crating services. The government intends to establish up to two Blanket Purchase Agreements (BPAs) for these services, with the award going to the responsible offeror with the lowest price, technically acceptable proposal. Vendors must submit their proposals, including proof of technical acceptability, a price list, and a signed SF 1449 Solicitation, by 12 June 2024 at 10:00 AM PDT. All questions must be submitted by 28 May 2024 at 10:00 AM PDT, with responses posted on SAM.gov.
View the file
Other files
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Defense Transportation Regulation – Part IV 26 July 2023 Personal Property
IV-I-1
APPENDIX I
EXAMPLES OF HAZARDOUS MATERIALS
A. COMBUSTIBLE LIQUIDS
Alcoholic beverages (any single container exceeding one gallon capacity) Alcohols Antifreeze compounds Camphor oil Fluid cleaners (containing combustible materials, e.g., spot clothing cleaners and office machine cleaners).
B. CORROSIVE LIQUIDS
Acids--muriatic, nitric, photographic, sulfuric Battery with acid Disinfectants Dyes Flame retardant compounds Iron/steel rust preventing/rust removing compounds Paint and paint related materials.
C. EXPLOSIVES
Ammunition Black powder Blasting caps Dynamite, plastics or any similar explosives Explosive auto alarms Fireworks Fuse lighters Igniters Primers Propellants Signal flares Smokeless powder Souvenir explosive instruments of war Spear guns having charged heads Toy propellants or smoke devices.
D. FLAMMABLES
Acetone Adhesives (glues, cements and plastics) Ammonia Charcoal briquettes Cleaning fluids Compound 3 weed killers Denatured alcohol Enamel Gasoline Insecticides
IV-I-2
Kerosene Lacquer Leather dressing or bleach Lighter fluids (pocket, charcoal, camp stove, lamp or torch) Liquors (any single container exceeding one gallon capacity) Matches Oil stains for wood Paint Paint or varnish remover Petroleum products Polishes, liquid (metal, stove, furniture and wood) Propane or other gas used for cooking or heating purposes Propane tanks Shellac Shoe polish (liquid) Solvents, plastic Stains Turpentine Varnish Wood filler.
E. GASES, COMPRESSED
Engine starting fluids Fire extinguishers Gases used in welding Scuba diving tanks (see note below).
F. AEROSOL CAN
Containing a Flammable Gas, Flammable Liquid, Toxic, or Corrosive Substance
G. CHLORINATED HYDROCARBONS IN DECORATIVE LAMPS
H. OTHER REGULATED MATERIAL TERMED COMBUSTIBLE, CORROSIVE, OR
FLAMMABLE
NOTE 1: Only those scuba diving tanks containing not more than 25 pounds per square inch at 70 degrees Fahrenheit may be shipped as household goods or unaccompanied baggage. Servicing for shipment will include:
1. Written certification of purging serviced by dive shop or licensed individual qualified to perform purging. A tag or label must be affixed to the tank certifying service was performed.
2. Completely empty tank, remove the valve, and replace valve with plug designed for this purpose.
NOTE 2: Completely drain all fuel from engine power driven equipment. Drain equipment (motorcycle, moped, lawn mowers, boats, snowmobiles.). Run until engine stalls. Drain all oil and water. Allow the fuel tank and lines to remain open for 24 hours prior to pickup. Disconnect nonspillable gel-type batteries and tape the ends to prevent short circuit. Only nonspillable gel-type batteries are authorized. The batteries may remain in the equipment holder, but ensure they remain upright when packed in the shipping container. Batteries with acid or alkali are prohibited from shipment.
IV-I-3
NOTE 3: Lithium batteries, although a Class IX (9) hazardous material, have been determined are allowed to be shipped as personal property in limited quantities. Shipment of lithium batteries must be properly packaged, labeled, and certified (if required) in accordance with 49 CFR 173.185, the International Maritime Dangerous Goods (IMDG) Code, the International Air Transport Association (IATA) and in accordance with local, state, federal, and foreign country or international laws, regulations, or guidance. Limited quantities are defined as lithium-ion cells rated at 100 watt-hours or less (20 watt-hours or less for single cell) and lithium metal batteries containing 2 grams or less of lithium content (1 gram or less for single cells). Lithium batteries greater than the limited quantities listed above are prohibited from being shipped. Lithium batteries of all types and sizes are prohibited from Non-Temporary Storage.
| APPENDIX I EXAMPLES OF HAZARDOUS MATERIALS |
| A. Combustible Liquids |
| B. Corrosive Liquids |
| C. Explosives |
| D. Flammables |
| E. Gases, Compressed |
| F. Aerosol Can |
| G. Chlorinated Hydrocarbons in Decorative Lamps |
| H. Other Regulated Material Termed Combustible, Corrosive, or Flammable |
File details come from the government source that posted it. Updated .