APPENDIX I.pdf
PDF 134 KB Posted
- Attached to
- LAMTRAC LTR Track Mulching Carrier
- Solicitation number
- ITB-10284
- Issued by
- Leon County, Florida
About this file
This document is an Appendix to a state or local government solicitation for a LAMTRAC LTR 6160T Track Mulching Carrier with a PRINOTH M450S-1900 M450S Mulching Head. The requested equipment will be used for upland Forestry Mitigation/Fuel Reduction Operations and must meet specific requirements for the engine, hydraulics, drivetrain, undercarriage, chassis, cab/ROPS, seating, electrical system, and lighting. The mulching head and associated equipment are also detailed. The contract requires a 12-month/1,000 hour full coverage warranty, with an additional 24-month/2,000 hour powertrain and hydraulic warranty. The equipment must be fully assembled, tested, and serviced prior to delivery to Lake City, Florida.
The document provides detailed technical specifications and requirements for the equipment, but does not mention pricing terms, set-asides, incumbents, funding information, or other salient commercial details. Bidders are required to provide make, model, and supporting data for the equipment they are proposing.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| ITB FFS 24 25 61_Final.pdf | ||
| Addendum 2_rev.pdf | ||
| APPENDIX I.pdf | ||
| ITB FFS 24 25 61_Final.pdf | ||
| Addendum 1.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
APPENDIX I
LAMTRAC LTR 6160T Track Mulching Carrier W/PRINOTH M450S-1900 M450S Mulching Head
GENERAL DESCRIPTION:
New LAMTRAC LTR 6160T mulching tracked carrier with Tier 4, 155 horsepower/525 ft lbs.
torque minimum (nominal net engine) diesel engine, enclosed cab, for use in upland Forestry Mitigation/ Fuel Reduction Operations. These units will be outfitted with the PRINOTH M450S- 1900 M450S Mulching Head and must be able to perform in extremely adverse conditions.
REQUIREMENTS:
A. Engine:
1. Tier 4, 4.5 L Cummins diesel engine with 155 horsepower, 525-pound feet torque.
2. Fan: Reversible.
3. Heavy duty Coolers/Radiator suitable for forestry application.
4. All coolers, tanks, cabinets shall be inboard as far as practical. Nothing shall protrude past the side of the cab to offer protection from dense underbrush.
5. Air filter intake must be equipped with an excessive restriction indication or alarm.
B. Hydraulics
1. Attachment pump max pressure, 6000 PSI.
2. Attachment pump flow, 0-44 GPM min.
3. Tank Capacity, 23.6 gal.
4. Aux. pump flow, 25.6 GPM.
C. Drive train:
1. All drive train components shall be heavy-duty type capable of continuous use per the defined application.
2. Transmission shall be hydrostatic drive with Two Speed Drive Motors.
3. Hydrostatic (dynamic) braking through machine drive system.
4. Accessible brake/drive release system to allow for free wheel of machine. (For towing if engine will not operate).
5. Joystick will have a Sensitivity option.
D. Undercarriage:
1. All undercarriage components shall be heavy-duty type capable of continuous use per the defined application.
2. Track width: 17.75” minimum.
3. Track type: Premium Forestry Duty Rubber.
4. Ground pressure (base vehicle, 4.24 psi maximum).
5. Remote lines for greasing any un-accessible zerk fitting/point will be provided
E. Winch:
1. 5011668 Winch Bumper Kit 6160T w/15K hydraulic winch kit.
F. Chassis:
1. Minimum ground clearance: 14.5”.
2. Maximum machine height, including R.O.P.S and grousers: 96”.
3. Maximum machine width, including tracks: 78”.
4. Fuel capacity: 42.46 gallons min.
5. DEF tank size, 5 gal. min.
6. Access to the engine compartment for service of the dipstick, oil fill, radiator cap and air cleaner shall be performed without the use of tools.
G. Cab, R.O.P.S. and Operator Protection:
1. ROS ISO 8082 / FOPS ISO 8083 / OPS ISO 8084, one (1), person, hydraulic tilt cab.
2. HVAC w/Mechanical 50Pa MERV 16 HEPA Filtration w/pressurized cab design.
3. No coolers (oil, hydraulic, coolant etc.) of any kind will be mounted in the cab.
H. Seats:
1. Pneumatic seat w/adjustable arm rest.
I. Electrical System:
1. 12-volt negative ground.
2. Alternator: 160 amps minimum.
3. 1500 CCA Battery.
4. Master electric disconnect switch.
5. Power port: one (1) 12 volt DC power port located in cab.
6. Gauges/Display 4.3” Color Display to include, Hour meter, tachometer (suitable for operator use), engine oil pressure, engine coolant temperature, hydraulic oil temperature, fuel level and voltmeter.
7. Rear View Camera: 7” HD Color Screen.
8. AM/FM Weather Radio.
9. Audible and visual alarm for low engine oil pressure and high engine coolant temperature.
10. Back-up alarm: Self-adjusting.
J. Lighting:
1. LED Lights w/360 degrees of vision.
2. LED lights shall be dedicated 12 volt, (no 12-36 volt). LED lights shall not emit any
Radio Frequency Interference. (RFI)
K. Paint:
1. Exterior: Cab, Red. Frame, Black.
L. Mulching Head:
1. New 2022 PRINOTH M450S-1900 Mulching Head
2. QEP Maintenance kit
3. Standard Length Hoses
4. BCS Style Rotor, 36x BCS03 4x BCS02
M. Printed Documents:
1. One (1), repair, parts and operator’s manual for each unit ordered.
2. Warranty text and manufacturer’s certificate of origin.
N. Warranty:
1. Vehicle warranty must be 12 months, or 1,000 hours, full coverage minimum.
2. 24 months, or 2000 hours Powertrain and Hydraulic coverage.
O. Conditions:
1. Unit must be completely assembled, tested and ready for operation upon delivery.
2. Price will include being Serviced in the field at the 100 hr. interval
3. Deliver to Lake City, Florida at (386) 243-6234 for delivery instructions.
4. Bidders will supply make and model of vehicle bid and data for specific items.
File details come from the government source that posted it. Updated .