Appendix B PUR 102.pdf

PDF 343 KB Posted

Attached to
Oil Water Separator Cleaning
Solicitation number
2137188
Issued by
Albany County, Albany City, New York

About this file

Summary of PUR 102 General Specifications Document

This document is the General Specifications (Publication PUR 102, April 2010) issued by the New York State Department of Transportation establishing standard terms and conditions applicable to all state procurement contracts unless expressly modified. The specifications comprehensively govern bidding procedures, bid evaluation criteria, and contract administration across solicitation types including Invitations for Bids (IFB), Requests for Quotation (RFQ), and Requests for Proposals (RFP). Key procedural requirements include sealed bid submission with proper labeling and identification, bid opening conducted by the Director of Purchasing, and timely delivery requirements of thirty calendar days after purchase order receipt unless otherwise specified. The document establishes that bids must conform to all specifications with no material deviations permitted, and extraneous terms submitted on pre-printed forms are deemed informational only unless specifically enumerated in separate written documentation and expressly accepted by the Director of Purchasing. Contract awards are deemed executed upon mailing or electronic communication of the final Contract Award Notice, fully executed contract, or properly authorized Purchase Order.

Pricing terms are established on a net basis including transportation, delivery, and all incidental charges prepaid by the contractor to specified destinations, with unit prices governing in case of discrepancies with extensions. The State is exempt from New York State and local sales taxes, with such exemption evidenced by the purchase order or invoice. The document incorporates comprehensive warranty provisions including product performance, title and ownership, workmanship, virus protection, and date/time functionality warranties with minimum one-year coverage from acceptance, extended by cumulative downtime periods. The contractor assumes full responsibility for all federal, state, and local taxes, FICA contributions, permits, licenses, and compliance with prevailing wage rate requirements for applicable public work and building services contracts. Termination provisions allow cancellation for cause with thirty days' notice for uncured material breach or termination for convenience with sixty days' notice without penalty, and the State reserves broad discretion in procurement decisions including emergency procurements from alternative sources without recourse or liability to the contractor.

View the file

Other files

Show all 17

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

GENERAL SPECIFICATIONS (Procurements and Procurement Contracts) Publication PUR 102

April 2010

APPENDIX B

PUBLICATION PUR 102 (General Specifications)

PLEASE RETAIN THIS DOCUMENT

FOR FUTURE REFERENCE

GENERAL SPECIFICATIONS (Procurements and Procurement Contracts) Publication PUR 102

April 2010

TABLE OF CONTENTS

GENERAL PAGE

1. Applicability 1

2. Governing Law 1

3. Ethics Compliance 1

4. Conflict of Terms 1

5. Definitions 1

BID SUBMISSION

6. International Bidding 3

7. Bid Opening 3

8. Bid Submission 3

9. Facsimile Submissions 3

10. Late Bids 3

11. Bid Contents 3

12. Extraneous Terms 3

13. Confidential/Trade Secret Materials 4

14. Release of Bid Evaluation Materials 4

15. Freedom of Information Law 4

16. Prevailing Wage Rates - Public Work and Building Services Contracts 4

17. Taxes 5

18. Expenses Prior to Contract Execution 5

19. Advertising Results 5

20. Product References 5

21. Remanufactured, Recycled, Recyclable

Or Recovered Materials 5

22. Products Manufactured in Public

Institutions 5

23. Pricing 6

24. Drawings 6

25. Site Inspection 6

26. Procurement Card 6

27. Samples 6

BID EVALUATION

28. Bid Evaluation 7

29. Conditional Bid 7

30. Clarification/Revisions 7

31. Prompt Payment Discounts 7

32. Equivalent or Identical Bids 7

33. Performance and Responsibility

Qualifications 7

34. Disqualification for Past Performance and

Findings of Non-Responsibility 7

35. Quantity Changes Prior To Award 8

36. Timeframe for Offers 8

TERMS & CONDITIONS

37. Contract Creation/Execution 8

38. Transportation Partners 8

39. Modification of Contract Terms 8

40. Scope Changes 8

TERMS & CONDITIONS PAGE

41. Estimated/Specific Quantity Contracts 8

42. Emergency Contracts 8

43. Purchase Orders 9

44. Product Delivery 9

45. Weekend and Holiday Deliveries 9

46. Shipping/Receipt of Product 9

47. Title and Risk of Loss 9

48. Re-Weighing Product 9

49. Product Substitution 9

50. Rejected Product 9

51. Installation 9

52. Repaired or Replaced Product/

Components 10

53. On-Site Storage 10

54. Employees, Subcontractors & Agents 10

55. Subcontractors and Suppliers 10

56. Performance/Bid Bond 10

57. Suspension of Work 10

58. Termination 10

59. Savings/Force Majeure 10

60. Contract Billings and Payments 11

61. Interest on Late Payments 11

62. Remedies for Breach 11

63. Assignment of Claim 12

64. Toxic Substances 12

65. Independent Contractor 12

66. Security 12

67. Cooperation with Third Parties 12

68. Contract Term - Renewal 12

69. Additional Warranties 12

70. Legal Compliance 13

71. Indemnification 13

72. Indemnification Relating to Third

Party Rights 13

73. Limitation of Liability 14

74. Insurance 14

TECHNOLOGY & NEGOTIATED CONTRACTS

75. Software License Grant 14

76. Product Acceptance 15

77. Audit of Licensed Product Usage 16

78. Ownership/Title to Project

Deliverables 16

79. Proof of License 17

80. Product Version 17

81. Changes to Product or

Service Offerings 17

82. No Hardstop/Passive

License Monitoring 17

83. Source Code Escrow for

Licensed Product 17

GENERAL SPECIFICATIONS (Procurements and Procurement Contracts) Publication PUR 102

April 2010 1

GENERAL

1. APPLICABILITY The terms and conditions set forth in this General Specification are expressly incorporated in and applicable to the resulting procurement contracts let by the New York State

Department of Transportation (hereafter the “State”) and shall govern such procurements or contracts unless expressly modified or amended by the terms of a Bid Specification, or a negotiated

Contract/Clarification document, if any. Captions are intended as descriptive and are not intended to limit or otherwise restrict the terms and conditions set forth herein.

2. GOVERNING LAW This procurement, and any resulting contract and/or purchase orders issued hereunder shall be governed by the laws of the State of New York except where the Federal

Supremacy Clause requires otherwise, and actions or proceedings arising from the contract shall be heard in a court of competent jurisdiction in the State of New York.

3. ETHICS COMPLIANCE All Bidders/Contractors and their employees must comply with the requirements of Sections 73 and 74 of the Public Officers Law, other State codes, rules, regulations and

Executive Orders establishing ethical standards for the conduct of business with New York State. In signing the Bid, Bidder certifies full compliance with those provisions for any present or future dealings, transactions, sales, contracts, services, offers, relationships, etc., involving the State and/or its employees. Failure to comply with those provisions may result in disqualification from the bidding process, termination of contract, and/or other civil or criminal proceedings as required by law.

4. CONFLICT OF TERMS Unless otherwise set forth in the procurement or contract documents, conflicts among documents shall be resolved in the following order of precedence:

a. Appendix A (Standard Clauses for All New York State

Contracts)

b. Contract and other writing(s) setting forth the final agreements, clarifications and terms between the Bid Documents and

Contractor’s Bid. In the latter circumstance, clarifications must specifically note in writing what was offered by the Contractor and what was accepted by the State. If not, such clarifications shall be considered last in the order of precedence under this paragraph.

c. Bid Documents (Other than Appendix A).

i. Bid Specifications prepared by the State.

ii. These General Specifications.

iii. Incorporated Contract Appendices, if any, following the order of precedence as stated for Contract above.

d. Bidder’s Bid.

e. Unincorporated Appendices (if any).

5. DEFINITIONS Terms used in these General Specifications shall have the following meanings:

AFFILIATE Any individual or other legal entity, (including but not limited to sole proprietor, partnership, limited liability company, firm or corporation) that effectively controls another company in which (a) the Bidder owns more than 50% of the ownership; or (b) any individual or other legal entity which owns more than 50% of the ownership of the Bidder. In addition, if a Bidder owns less than 50% of the ownership of another legal entity, but directs or has the right to direct such entity’s daily operations, that entity will be an Affiliate.

ATTORNEY GENERAL The Attorney General of the State of New

York.

AUTHORIZED USER(S) An employee or organization of the

Department of Transportation, or other entity authorized by law, rule, or other lawful means to participate in contracts let and awarded by the

Department of Transportation, provided that each such other entity shall be held solely responsible for liabilities and/or payments due as a result of its participation. Also referred to herein as “Buyer”.

BID OR BID PROPOSAL An offer or proposal submitted by a

Bidder to furnish a described product or a solution, perform services or means of achieving a practical end, at a stated price for the stated

Contract term. As required by the Bid Documents, the Bid or proposal may be subject to modification through the solicitation by the Agency of best and final offers during the evaluation process prior to recommendation for award of the Contract.

BIDDER/OFFERER Any individual or other legal entity (including but not limited to sole proprietor, partnership, limited liability company, firm or corporation) which submits a Bid in response to a

Bid Solicitation. The term Bidder shall also include the term

“offeror.” In the case of negotiated Contracts, “Bidder” shall refer to the “Contractor.”

BID DOCUMENTS Writings setting forth the scope, terms, conditions and technical specifications for a procurement of Product.

Such writings typically include, but are not limited to: Invitation for

Bids (IFB), Request for Quotation (RFQ), Request for Proposals

(RFP), addenda or amendments thereto, and terms and conditions which are incorporated by reference, including but not limited to, Appendix A (Standard Clauses for All NYS Contracts), General

Specifications. Where these General Specifications are incorporated in negotiated Contracts that have not been competitively Bid, the term

“Bid Documents” shall be deemed to refer to the terms and conditions set forth in the negotiated Contract and associated documentation.

BID SPECIFICATION A written description setting forth the specific terms of the intended procurement, which may include:

physical or functional characteristics, the nature of a commodity or construction item, any description of the work to be performed, Products to be provided, the necessary qualifications of the Bidder, the capacity and capability of the Bidder to successfully carry out the proposed Contract, or the process for achieving specific results and/or anticipated outcomes or any other requirement necessary to perform work. Where these General Specifications are incorporated in negotiated Contracts that have not been competitively Bid, the term

“Bid Specifications” shall be deemed to refer to the terms and conditions set forth in the negotiated Contract and associated documentation.

COMMISSIONER The Commissioner of the New York State

Department of Transportation.

COMPTROLLER The Comptroller of the State of New York.

CONTRACT The writing(s) which contain the agreement of the

State and the Bidder/Contractor setting forth the total legal obligation between the parties as determined by applicable rules of law.

CONTRACT AWARD NOTIFICATION The official announcement that a Contract has been established between the State and the successful bidder.

CONTRACTOR Any successful Bidder(s) to whom a Contract has been awarded by the State.

GENERAL SPECIFICATIONS (Procurements and Procurement Contracts) Publication PUR 102

April 2010 2

DIRECTOR OF PURCHASING The Director of Purchasing for the NYS Department of Transportation or his/her designee.

DOCUMENTATION The complete set of manuals (e.g., user, installation, instruction or diagnostic manuals) in either hard or electronic copy, which are necessary to enable the Buyer to properly test, install, operate and enjoy full use of the Product.

EMERGENCY An urgent and unexpected requirement where health and public safety or the conservation of public resources is at risk.

ENTERPRISE The total business operations in the United States of

Authorized User (s) without regard to geographic location where such operations are performed or the entity actually performing such operations on behalf of the State.

ENTERPRISE LICENSE A license grant of unlimited rights to deploy, access, use and execute Product anywhere within the

Enterprise up to the maximum capacity stated on the Purchase Order or in the Contract.

ERROR CORRECTIONS Machine executable software code furnished by Contractor which corrects the Product so as to conform to the applicable warranties, performance standards and/or obligations of the Contractor.

GROUP NUMBER A codified classification of products, services or technology.

INVITATION FOR BIDS (IFB) or REQUEST FOR QUOTATION

A type of Bid Document which is most typically used where requirements can be stated and award will be made based on lowest price to the responsive and responsible Bidder(s).

ITEM Any material, service, equipment or supplies.

LATE BID A bid not received in the location established in the

IFB/RFQ at or before the date and time specified for the bid opening.

LICENSED SOFTWARE Software transferred upon the terms and conditions set forth in the Contract. “Licensed Software” includes error corrections, upgrades, enhancements or new releases, and any deliverables due under a maintenance or service contract (e.g., patches, fixes, PTFs, programs, code or data conversion, or custom programming).

LICENSEE One or more Authorized Users who acquire Product from a Contractor by issuing a Purchase Order in accordance with the terms and conditions of the Contract.

LICENSE EFFECTIVE DATE The date Product is delivered to the

Buyer. Where a License involves Licensee’s right to copy a previously licensed and delivered Master Copy of a Program, the license effective date for additional copies shall be deemed to be the date on which the

Purchase Order is executed.

LICENSOR A Contractor who transfers rights in proprietary Product to the Authorized User(s) in accordance with the rights and obligations specified in the Contract.

MULTIPLE AWARD A determination and award of a Contract in the discretion of the Director or Purchasing to more than one responsive and responsible Bidder who meets the requirements of a specification, where the multiple award is made on the grounds set forth in the Bid Document in order to satisfy multiple factors and needs of Authorized Users (e.g., complexity of items, various manufacturers, differences in performance required to accomplish or produce required end results, production and distribution facilities, price, compliance with delivery requirements, geographic location or other pertinent factors).

NEW PRODUCT RELEASES (Product Revisions) Any commercially released revisions to the licensed version of a Product as may be generally offered and available for sale. New releases involve a substantial revision of functionality from a previously released version of the Product.

NOTICE OF PROCUREMENT CONTRACT AWARD The notification to the successful bidder(s) and other interested parties indicating the acceptance of a bid in response to a solicitation. Unless otherwise specified, the issuance of a Notice of Contract Award forms a part of the contract but is not an order for Product. A Contractor should not take any action with respect to actual contract deliveries except on the basis of Purchase Orders issued by an Authorized User.

PROCUREMENT RECORD Documentation of the decisions made and approach taken during the procurement process and during the contract term.

PRODUCT A deliverable under any Bid or Contract which may include commodities, services and/or technology. The term “Product” includes Licensed Software.

PROPRIETARY Protected by secrecy, patent, copyright or trademark against commercial competition.

PURCHASE ORDER The Buyer’s fiscal form or format that is used when making a purchase (e.g., formal written Purchase Order, Procurement Card, electronic Purchase Order, or other authorized instrument).

REQUEST FOR PROPOSALS (RFP) A type of Bid Document that is used for procurements where factors in addition to cost are considered and weighted in awarding the contract and where the method of award is “best value,” as defined by the State.

RESPONSIBLE BIDDER A Bidder that is determined to have financial and organizational capacity, legal authority, satisfactory previous performance, skill, judgment and integrity, and that is found to be competent, reliable and experienced, as determined by the

Director of Purchasing. For purposes of being deemed responsible, a

Bidder must also be determined to be in compliance with Sections

139-j and 139-k of the State Finance Law relative to restrictions on contacts during the procurement process and disclosure of contacts and prior findings of non-responsibility under these statutes.

RESPONSIVE BIDDER A Bidder meeting the specifications and other requirements prescribed in the Bid Document or solicitation, as determined by the Director of Purchasing.

SINGLE SOURCE A procurement where two or more Bidders can supply the required Product, and the State may award the contract to one Bidder over the other for documented reasons demonstrating that the State’s best interest is served.

SITE The location (street address) where Product will be executed or services delivered.

SOLE SOURCE A procurement where only one Bidder is capable of supplying the required Product.

GENERAL SPECIFICATIONS (Procurements and Procurement Contracts) Publication PUR 102

April 2010 3

SOURCE CODE The programming statements or instructions written and expressed in any language understandable by a human being skilled in the art which are translated by a language compiler to produce executable machine Object Code.

STATE The State of New York.

SUBCONTRACTOR Any individual or other legal entity, (including but not limited to sole proprietor, partnership, limited liability company, firm or corporation) who has entered into a contract, express or implied, for the performance of a portion of a Contract with a

Contractor.

TERMS OF LICENSE The terms and conditions set forth in the

Contract that are in effect and applicable to a Purchase Order at the time of order placement.

VIRUS Any computer code, whether or not written or conceived by

Contractor, that disrupts, disables, harms, or otherwise impedes in any manner the operation of the Product, or any other associated software, firmware, hardware, or computer system (such as local area or wide-area networks), including aesthetic disruptions or distortions, but does not include security keys or other such devices installed by Product manufacturer.

BID SUBMISSION

6. INTERNATIONAL BIDDING All offers (tenders), and all information and Product required by the solicitation or provided as explanation thereof, shall be submitted in English. All prices shall be expressed, and all payments shall be made, in United States Dollars

($US). Any offers (tenders) submitted which do not meet the above criteria may be rejected.

7. BID OPENING Bids may, as applicable, be opened publicly.

The Director of Purchasing reserves the right at any time to postpone or cancel a scheduled Bid opening.

8. BID SUBMISSION All Bids are to be packaged, sealed and submitted to the location stated in the Bid Specifications. Bidders are solely responsible for timely delivery of their Bids to the location set forth in the Bid Specifications prior to the stated Bid opening date/time.

A Bid return envelope, if provided with the Bid Specifications, should be used with the Bid sealed inside. If the Bid response does not fit into the envelope, the Bid envelope should be attached to the outside of the sealed box or package with the Bid inside. If using a commercial delivery company that requires use of their shipping package or envelope, Bidder’s sealed Bid, labeled as detailed below, should be placed within the shipper’s sealed envelope to ensure that the Bid is not prematurely opened.

All Bids must have a label on the outside of the package or shipping container outlining the following information:

“BID ENCLOSED (bold print, all capitals)

• IFB, RFQ or RFP Number

• Date and Time Scheduled for Bid Opening

In the event that a Bidder fails to provide such information on the return Bid envelope or shipping material, the receiving entity reserves the right to open the shipping package or envelope to determine the proper IFB or RFQ number, and the due date and time. Bidder shall have no claim against the receiving entity arising from such opening and such opening shall not affect the validity of the Bid or the procurement.

Notwithstanding the Purchasing Office’s right to open a Bid to ascertain the foregoing information, Bidder assumes all risk of late delivery associated with the Bid not being identified, packaged or labeled in accordance with the foregoing requirements.

All Bids must be signed by a person authorized to commit the Bidder to the terms of the Bid Documents and the content of the Bid (offer).

9. FACSIMILE SUBMISSIONS Unless specifically provided for in the IFB, facsimile bids will NOT be considered. Only original bids bearing original signatures in ink will be considered.

10. LATE BIDS Any Bid received at the specified location after the time specified will be considered a late Bid. A late Bid shall not be considered for award unless: (i) no timely Bids meeting the requirements of the Bid Documents are received or, (ii) in the case of a multiple award, an insufficient number of timely Bids were received to satisfy the multiple award; and acceptance of the late Bid is in the best interests of the State. Bids submitted for continuous or periodic recruitment contract awards must meet the submission requirements associated with their specifications. Delays in United States mail deliveries or any other means of transmittal, including couriers or agents of the State shall not excuse late Bid submissions. Similar types of delays, including but not limited to, bad weather, or security procedures for parking and building admittance shall not excuse late

Bid submissions. Determinations relative to Bid timeliness shall be at the sole discretion of the Director of Purchasing.

11. BID CONTENTS Bids must be complete and legible. All Bids must be signed. All information required by the Bid Solicitation must be supplied by the Bidder on the forms or in the format specified. No alteration, erasure or addition is to be made to the Bid Document.

Changes may be ignored, or may be grounds for rejection of the Bid.

Changes, corrections and/or use of white-out in the Bid or Bidder’s response portion of the Bid Document must be initialed by an authorized representative of the Bidder. Bidders are cautioned to verify their Bids before submission, as amendments to Bids or requests for withdrawal of Bids received after the time specified for the Bid opening, may not be considered.

12. EXTRANEOUS TERMS Bids must conform to the terms set forth in the Bid Documents, as extraneous terms or material deviations

(including additional, inconsistent, conflicting or alternative terms) may render the Bid non-responsive and may result in rejection of the

Bid.

Extraneous term(s) submitted on standard, pre-printed forms

(including but not limited to: product literature, order forms, license agreements, contracts or other documents) that are attached or referenced with submissions shall not be considered part of the Bid or resulting Contract, but shall be deemed included for informational or promotional purposes only.

Only those extraneous terms that meet all the following requirements may be considered as having been submitted as part of the Bid:

GENERAL SPECIFICATIONS (Procurements and Procurement Contracts) Publication PUR 102

April 2010 4

a. Each proposed extraneous term (addition, deletion, counter-offer, deviation, or modification) must be specifically enumerated in a writing which is not part of a pre-printed form; and

b. The writing must identify the particular specification requirement

(if any) that Bidder rejects or proposes to modify by inclusion of the extraneous term; and

c. The Bidder shall enumerate the proposed addition, counter offer, modification or deviation from the Bid Document, and the reasons therefore.

No extraneous term(s), whether or not deemed “material,” shall be incorporated into a Contract or Purchase Order unless submitted in accordance with the above and the Director of Purchasing expressly accepts each such term(s) in writing. Acceptance and/or processing of the Bid shall not constitute such written acceptance of Extraneous

Term(s).

13. CONFIDENTIAL/TRADE SECRET MATERIALS

a. Contractor Confidential, trade secret or proprietary materials as defined by the laws of the State of New York must be clearly marked and identified as such upon submission by the Bidder. Marking the

Bid as “confidential” or “proprietary” on its face or in the document header or footer shall not be considered by the Director of Purchasing to be sufficient without specific justification as to why disclosure of particular information in the Bid would cause substantial injury to the competitive position of the Bidder. Bidders/Contractors intending to seek an exemption from disclosure of these materials under the

Freedom of Information Law must request the exemption in writing, setting forth the reasons for the claimed exemption. Acceptance of the claimed materials does not constitute a determination on the exemption request, which determination will be made in accordance with statutory procedures. Properly identified information that has been designated confidential, trade secret, or proprietary by the Bidder will not be disclosed except as may be required by the Freedom of

Information Law or other applicable State and federal laws.

b. State of New York Contractor further warrants, covenants and represents that any confidential information obtained by Contractor, its agents, Subcontractors, officers, distributors, resellers or employees in the course of performing its obligations, including without limitation, security procedures, business operations information, or commercial proprietary information in the possession of the State hereunder or received from another third party, will not be divulged to any third parties. Contractor shall not be required to keep confidential any such material that is publicly available through no fault of Contractor, independently developed by Contractor without reliance on confidential information of the State , or otherwise obtained under the

Freedom of Information Act or other applicable New York State laws and regulations. This warranty shall survive termination of this

Contract. Contractor further agrees to take appropriate steps as to its agents, Subcontractors, officers, distributors, resellers or employees regarding the obligations arising under this clause to insure such confidentiality.

14. RELEASE OF BID EVALUATION MATERIALS Requests concerning the evaluation of Bids may be submitted under the

Freedom of Information Law. Information, other than statistical or factual tabulations or data such as the Bid Tabulation, shall only be released as required by law after Contract award. Bid Tabulations are not maintained for all procurements. Names of Bidders may be disclosed after Bid opening upon request. Written requests should be directed to the Director of Purchasing.

15. FREEDOM OF INFORMATION LAW During the evaluation process, the content of each Bid will be held in confidence and details of any Bid will not be revealed (except as may be required under the

Freedom of Information Law or other State law). The Freedom of

Information Law provides for an exemption from disclosure for trade secrets or information the disclosure of which would cause injury to the competitive position of commercial enterprises. This exception would be effective both during and after the evaluation process. If the

Bid contains any such trade secret or other confidential or proprietary information, it must be accompanied in the Bid with a written request to the Director of Purchasing to not disclose such information. Such request must state with particularity the reasons why the information should not be available for disclosure and must be provided at the time of submission of the Bid. Notations in the header, footer or watermark of the Bid Document will not be considered sufficient to constitute a request for non-disclosure of trade secret or other confidential or proprietary information. Where a Freedom of Information request is made for trademark or other confidential or proprietary information, the State reserves the right to determine upon written notice to the

Bidder whether such information qualifies for the exemption for disclosure under the law. Notwithstanding the above, where a Bid tabulation is prepared and Bids publicly opened, such Bid tabulation shall be available upon request.

16. PREVAILING WAGE RATES - PUBLIC WORK AND

BUILDING SERVICES CONTRACTS If any portion of work being Bid is subject to the prevailing wage rate provisions of the Labor

Law, the following shall apply:

a. “Public Work” and “Building Services” - Definitions

i. Public Work Labor Law Article 8 applies to contracts for public improvement in which laborers, workers or mechanics are employed on a “public work” project (distinguished from public

“procurement” or “service” contracts). The State must be a party to the Contract. The wage and hours provision applies to any work performed by Contractor or Subcontractors.

ii. Building Services Labor Law Article 9 applies to Contracts for building service work over $1,500 with a public agency, that: (i) involve the care or maintenance of an existing building, or (ii) involve the transportation of office furniture or equipment to or from such building, or (iii) involve the transportation and delivery of fossil fuel to such building, and (iv) the principal purpose of which is to furnish services through use of building service employees.

b. Prevailing Wage Rate Applicable to Bid Submissions A copy of the applicable prevailing wage rates to be paid or provided are available by accessing the internet address listed in the Bid Document or annexed to the Bid Documents. Bidders must submit Bids which are based upon the prevailing hourly wages, and supplements in cash or equivalent benefits (i.e. fringe benefits and any cash or non-cash compensation which are not wages, as defined by law) that equal or exceed the applicable prevailing wage rate(s) for the location where the work is to be performed. Bidders may not submit Bids based upon hourly wage rates and supplements below the applicable prevailing wage rates as established by the New York State Department of Labor.

Bids that fail to comply with this requirement will be disqualified.

c. Wage Rate Payments / Changes During Contract Term The wages to be paid under any resulting Contract shall not be less than the prevailing rate of wages and supplements as set forth by law. It is required that the Contractor keep informed of all changes in the

Prevailing Wage Rates during the Contract term that apply to the classes of individuals supplied by the Contractor on any projects

GENERAL SPECIFICATIONS (Procurements and Procurement Contracts) Publication PUR 102

April 2010 5 resulting from this Contract, subject to the provisions of the Labor

Law. Contractor is solely liable for and must pay such required prevailing wage adjustments during the Contract term as required by law.

d. Public Posting & Certified Payroll Records In compliance with Article 8, Section 220 of the New York State Labor Law:

i. Posting The Contractor must publicly post on the work site, in a prominent and accessible place, a legible schedule of the prevailing wage rates and supplements.

ii. Payroll Records Contractors and Subcontractors must keep original payrolls or transcripts subscribed and affirmed as true under the penalties of perjury as required by law. For public work contracts over $25,000 where the Contractor maintains no regular place of business in New York State, such records must be kept at the work site. For building services contracts, such records must be kept at the work site while work is being performed.

iii. Submission of Certified Payroll Transcripts for Public

Work Contracts Only Contractors and Subcontractors on public work projects must submit monthly payroll transcripts to the State.

Upon mutual agreement of the Contractor and the State, the form of submission may be submitted in a specified disk format acceptable to the Department of Labor provided: 1) the Contractor/Subcontractor retains the original records; and, (2) an original signed letter by a duly authorized individual of the Contractor or Subcontractor attesting to the truth and accuracy of the records accompanies the disk. This provision does not apply to Article 9 of the Labor Law building services contracts.

iv. Records Retention Contractors and Subcontractors must preserve such certified transcripts for a period of three years from the date of completion of work on the awarded contract.

Day’s Labor Eight hours shall constitute a legal day's work for all classes of employees in this state except those engaged in farm and domestic service unless otherwise provided by law.

No laborers, workmen or mechanics in the employ of the Contractor, Subcontractor or other person doing or contracting to do all or part of the work contemplated by the Contract shall be permitted or required to work more than eight hours in any one calendar day or more than five calendar days in any one week except in cases of extraordinary emergency including fire, flood or danger to life or property.

“Extraordinary emergency” shall be deemed to include situations in which sufficient laborers, workers and mechanics cannot be employed to carry on public work expeditiously as a result of such restrictions upon the number of hours and days of labor and the immediate commencement or prosecution or completion without undue delay of the public work is necessary in the judgment of the NYS

Commissioner of Labor for the preservation of the Contract site or for the protection of the life and limb of the persons using the Contract site.

17. TAXES

a. Unless otherwise specified in the Bid Specifications or Contract, the quoted Bid price includes all taxes applicable to the transaction.

b. Purchases made by the State are exempt from New York State and local sales taxes and, with certain exceptions, federal excise taxes.

To satisfy the requirements of the New York State Sales tax exemption, either the Purchase Order issued by the State or the invoice forwarded to authorize payment for such purchases will be sufficient evidence that the sale by the Contractor was made to the State, an exempt organization under Section 1116 (a) (1) of the Tax Law. No person, firm or corporation is, however, exempt from paying the State

Truck Mileage and Unemployment Insurance or Federal Social

Security taxes, which remain the sole responsibility of the

Bidder/Contractor.

c. Pursuant to Revised Tax Law 5-a, Contractor will be required to furnish sales tax certification on its behalf and for its affiliates, and subcontractors for Contracts with a value greater than $100,000 in accordance with provisions of the law.

18. EXPENSES PRIOR TO CONTRACT EXECUTION The

State is not liable for any costs incurred by a Vendor, Bidder or

Contractor in the preparation and production of a Bid, Mini-Bid or

Best and Final Offer (BFO) or for any work performed prior to

Contract execution.

19. ADVERTISING RESULTS The prior written approval of the

State is required in order for results of the Bid to be used by the

Contractor as part of any commercial advertising. The Contractor shall also obtain the prior written approval of the Commissioner relative to the Bid or Contract for press or other media releases.

20. PRODUCT REFERENCES

a. “Or Equal” In all Bid Specifications the words “or equal” are understood to apply where a copyrighted, brand name, trade name, catalog reference, or patented Product is referenced. References to such specific Product are intended as descriptive, not restrictive, unless otherwise stated. Comparable Product will be considered if proof of compatibility is provided, including appropriate catalog excerpts, descriptive literature, specifications and test data, etc. The

Director of Purchasing’s decision as to acceptance of the Product as equal shall be final.

b. Discrepancies in References In the event of a discrepancy between the model number referenced in the Bid Specifications and the written description of the Products which cannot be reconciled, with respect to such discrepancy, then the written description shall prevail.

21. REMANUFACTURED, RECYCLED, RECYCLABLE OR

RECOVERED MATERIALS Upon the conditions set forth in the

Bid Specifications and in accordance with the laws of the State of New

York, Contractors are encouraged to use recycled, recyclable or recovered materials in the manufacture of Products and packaging to the maximum extent practicable without jeopardizing the performance or intended end use of the Product or packaging unless such use is precluded due to health, welfare, safety requirements or in the Bid

Specifications. Contractors are further encouraged to offer remanufactured Products to the maximum extent practicable without jeopardizing the performance or intended end use of the Product and unless such use is precluded due to health, welfare, safety requirements or by the Bid Specifications. Where such use is not practical, suitable, or permitted by the Bid Specifications, Contractor shall deliver new materials in accordance with the “Warranties" set forth below. Items with recycled, recyclable, recovered, refurbished or remanufactured content must be identified in the Bid or Bidder will be deemed to be offering new Product.

22. BIDS OFFERING PRODUCTS MANUFACTURED IN

PUBLIC INSTITUTIONS Bids offering Products that are manufactured or produced in public institutions will be rejected.

GENERAL SPECIFICATIONS (Procurements and Procurement Contracts) Publication PUR 102

April 2010 6

23. PRICING

a. Unit Pricing If required by the Bid Specifications, the Bidder should insert the price per unit specified and the price extensions in decimals, not to exceed four places for each item unless otherwise specified, in the Bid. In the event of a discrepancy between the unit price and the extension, the unit price shall govern unless, in the sole judgment of the Director of Purchasing, such unit pricing is obviously erroneous.

b. Net Pricing Unless otherwise required by the Bid Specifications, prices shall be net, including transportation, customs, tariff, delivery and other charges fully prepaid by the Contractor to the destination(s) indicated in the Bid Specifications, subject to the cash discount.

c. “No Charge” Bid When Bids are requested on a number of

Products as a Group or Lot, a Bidder desiring to Bid “no charge” on a

Product in the Group or Lot must clearly indicate such. Otherwise, such Bid may be considered incomplete and be rejected, in whole or in part, at the discretion of the Director of Purchasing.

d. Educational Pricing All Products to be supplied for educational purposes that are subject to educational discounts shall be identified in the Bid and such discounts shall be made available to the Department.

e. Third Party Financing If Product acquisitions are financed through any third party financing, Contractor may be required as a condition of Contract Award to agree to the terms and conditions of a

“Consent & Acknowledgment Agreement” in a form acceptable to the

Director of Purchasing.

f. Best Pricing Offer During the Contract term, if substantially the same or a smaller quantity of a Product is sold by the Contractor outside of this Contract in similar quantities and/or upon the same or similar terms and conditions as that of this Contract at a lower price to a federal, state or local governmental entity, the price under this

Contract, at the discretion of the Director of Purchasing, shall be immediately reduced to the lower price.

Price decreases shall take effect automatically during the Contract term and apply to Purchase Orders submitted on or after:

(i) GSA Changes: Where Net Prices are based on an approved GSA

Schedule, the date the approved GSA Schedule pricing decreases during the Contract term; or

(ii) Commercial Price List Reductions: Where Net Prices are based on a discount from Contractor’s list prices, the date Contractor lowers its pricing to its customers generally or to similarly situated government customers during the Contract term; or

(iii) Special Offers/Promotions Generally: Where Contractor generally offers more advantageous special price promotions or special discount pricing to other customers during the Contract term for a similar quantity, and the maximum price or discount associated with such offer or promotion is better than the discount or Net Price otherwise available under this Contract, such better price or discount shall apply for similar quantity transactions under this Contract for the life of such general offer or promotion.

Unless otherwise specified in the Bid Specifications, Contractor may offer lower prices or better terms (see Modification of Contract Terms) on any specific NYSDOT Purchase Order(s) without being in conflict with, or obligation to comply on a global basis.

g. Best and Final Prices As specified in the Bid Documents and

Contract, a Contractor may be solicited at the time of issuance of a

Purchase Order for best and final pricing for the Product or service to be delivered. Contractors are encouraged to reduce their pricing upon receipt of such request.

24. DRAWINGS

a. Drawings Submitted With Bid When the Bid Specifications require the Bidder to furnish drawings and/or plans, such drawings and/or plans shall conform to the mandates of the Bid Documents and shall, when approved by the Director of Purchasing, be considered a part of the Bid and of any resulting Contract. All symbols and other representations appearing on the drawings shall be considered a part of the drawing.

b. Drawings Submitted During the Contract Term Where required to develop, maintain and deliver diagrams or other technical schematics regarding the scope of work, Contractor shall do so on an ongoing basis at no additional charge, and must, as a condition of payment, update drawings and plans during the Contract term to reflect additions, alterations, and deletions. Such drawings and diagrams shall be delivered to the Using Agency’s representative.

c. Accuracy of Drawings Submitted All drawings shall be neat and professional in manner and shall be clearly labeled as to locations and type of product, connections and components. Drawings and diagrams are to be in compliance with accepted drafting standards.

Acceptance or approval of such plans shall not relieve the Contractor from responsibility for design or other errors of any sort in the drawings or plans, or from its responsibility for performing as required, furnishing product, services or installation, or carrying out any other requirements of the intended scope of work.

25. SITE INSPECTION Where a site inspection is required by the

Bid Specifications or Project Definition, Bidder shall be required to inspect the site, including environmental or other conditions for pre-existing deficiencies that may affect the installed Product, equipment, or environment or services to be provided and, which may affect

Bidder’s ability to properly deliver, install or otherwise provide the required Product or service. All inquiries regarding such conditions shall be made in writing. Bidder shall be deemed to have knowledge of any deficiencies or conditions which such inspection or inquiry might have disclosed. Bidder must provide a detailed explanation with its Bid if additional work is required under this clause in order to properly complete the delivery and installation of the required Product or provide the requested service.

26. PROCUREMENT CARD The State of New York has entered into an agreement for purchasing card services. The Procurement Card enables Authorized Users to make authorized purchases directly from a Contractor without issuing a Purchase Order. Procurement Cards are issued to selected employees authorized to purchase for the Authorized

User and having direct contact with Contractors. Cardholders can make purchases directly from any Contractor that accepts the

Procurement Card.

The Contractor shall not process a transaction for payment through the credit card clearinghouse until the purchased products have been shipped or services performed. Unless the cardholder requests correction or replacement of a defective or faulty Product in accordance with other Contract requirements, the Contractor shall immediately credit a cardholder’s account for products returned as defective or faulty.

27. SAMPLES

a. Standard Samples Bid Specifications may indicate that the

Product to be purchased must be equal to a standard sample on display in a place designated by the Director of Purchasing and such sample

GENERAL SPECIFICATIONS (Procurements and Procurement Contracts) Publication PUR 102

April 2010 7 will be made available to the Bidder for examination prior to the opening date. Failure by the Bidder to examine such sample shall not entitle the Bidder to any relief from the conditions imposed by the Bid

Specifications.

b. Bidder Supplied Samples The Director of Purchasing reserves the right to request from the Bidder/Contractor a representative sample(s) of the Product offered at any time prior to or after award of a contract. Unless otherwise instructed, samples shall be furnished within the time specified in the request. Untimely submission of a sample may constitute grounds for rejection of Bid or cancellation of the Contract. Unless otherwise specified, samples must be submitted free of charge and be accompanied by the Bidder’s name and address, any descriptive literature relating to the Product and a statement indicating how and where the sample is to be returned. Where applicable, samples must be properly labeled with the appropriate Bid or Contract reference.

A sample may be held by the Director of Purchasing during the entire term of the Contract and for a reasonable period thereafter for comparison with deliveries. At the conclusion of the holding period the sample, where feasible, will be returned as instructed by the

Bidder, at the Bidder’s expense and risk. Where the Bidder has failed to fully instruct the Director of Purchasing as to the return of the sample (i.e., mode and place of return, etc.) or refuses to bear the cost of its return, the sample shall become the sole property of the receiving entity at the conclusion of the holding period.

c. Enhanced Samples When an approved sample exceeds the minimum specifications, all Product delivered must be of the same enhanced quality and identity as the sample. Thereafter, in the event of a Contractor’s default, the Director of Purchasing may procure a

Product substantially equal to the enhanced sample from other sources, charging the Contractor for any additional costs incurred.

d. Conformance with Sample(s) Submission of a sample (whether or not such sample is tested by, or for, the Director of Purchasing) and approval thereof shall not relieve the Contractor from full compliance with all terms and conditions, performance related and otherwise, specified in the Bid Specifications. If in the judgment of the Director of Purchasing the sample or product submitted is not in accordance with the specifications or testing requirements prescribed in the Bid

Specifications, the Director of Purchasing may reject the Bid. If an award has been made, the Director of Purchasing may cancel the

Contract at the expense of the Contractor.

e. Testing All samples are subject to tests in the manner and place designated by the Director of Purchasing, either prior to or after

Contract award. Unless otherwise stated in the Bid Specifications, Bidder samples consumed or rendered useless by testing will not be returned to the Bidder. Testing costs for samples that fails to meet

Contract requirements may be at the expense of the Contractor.

BID EVALUATION

28. BID EVALUATION The Director of Purchasing reserves the right to accept or reject any and all Bids, or separable portions of offers, and waive technicalities, irregularities, and omissions if he/she determines the best interests of the State will be served. The Director, in his/her sole discretion, may accept or reject illegible, incomplete or vague Bids and his/her decision shall be final. A conditional or revocable Bid which clearly communicates the terms or limitations of acceptance may be considered, and Contract award may be made in compliance with the Bidder’s conditional or revocable terms in the offer.

29. CONDITIONAL BID Unless the Bid Specifications provides otherwise, a Bid is not rendered non-responsive if the Bidder specifies that the award will be accepted only on all or a specified group of items or Product included in the specification. It is understood that nothing herein shall be deemed to change or alter the method of award contained in the Bid Documents.

30. CLARIFICATIONS / REVISIONS Prior to award, the

Director of Purchasing reserves the right to seek clarifications, request

Bid revisions, or to request any information deemed necessary for proper evaluation of Bids from all Bidders deemed to be eligible for

Contract award. Failure to provide requested information may result in rejection of the Bid.

31. PROMPT PAYMENT DISCOUNTS While prompt payment discounts will not be considered in determining the low Bid, the

Director of Purchasing may consider any prompt payment discount in resolving Bids which are otherwise ‘tied’. However, any notation indicating that the price is net, (e.g., net 30 days), shall be understood to mean only that no prompt payment discount is offered by the

Bidder. The imposition of service, interest, or other charges, except pursuant to the provisions of Article 11-A of the State Finance Law, which are applicable in any case, may render the Bid non-responsive and may be cause for its rejection.

32. EQUIVALENT OR IDENTICAL BIDS In the event two offers are found to be substantially equivalent, price shall be the basis for determining the award recipient. If two or more Bidders submit substantially equivalent Bids as to pricing or other factors, a decision by the Director of Purchasing to award a Contract to one or more of such Bidders shall be final.

33. PERFORMANCE / RESPONSIBILITY QUALIFICATIONS

The Director of Purchasing reserves the right to investigate or inspect at any time whether or not the Product, services, qualifications or facilities offered by the Bidder/Contractor meet the requirements set forth in the Bid Specifications/Contract or as set forth during Contract negotiations. Contractor shall at all times during the Contract term remain responsible and responsive. A Bidder/Contractor must be prepared, if requested by the Director of Purchasing, to present evidence of legal authority to do business in New York State, integrity, experience, ability, prior performance, organizational and financial capacity as well as where applicable, a statement as to supply, plant, machinery and capacity of the manufacturer or source for the production, distribution and servicing of the Product offered/Bid. If the Director of Purchasing determines that the terms and conditions of the Bid Documents and/or Specifications are not complied with, or that items, services or Product proposed to be furnished do not meet the specified requirements, or that the legal authority, integrity experience, ability, prior performance, organization and financial capacity or facilities are not satisfactory, he/she may recommend rejection of such Bid.

34. DISQUALIFICATION FOR PAST PERFORMANCE AND

FINDINGS OF NON-RESPONSIBILITY Bidder may be disqualified from receiving awards if Bidder, or anyone in Bidder’s employment, has previously…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .