Appendix_A-1.pdf

E E R T Y N K K r y e y

02/20/2022

CITY OF SARASOTA, FLORIDA

APPENDIX A-1

POTABLE WATER

APPROVED MATERIAL LIST

PLEASE TYPE OR PRINT CLEARLY IN BLACK INK

Project Name:

Contract / Bid Number: Work Assignment Number:

Contractor’s Name:

Contractor’s Address:

Contractor’s Signature:

For City Use Only

(Refer to Section 01300 – Submittals)

Engineer: Date:

Reviewed, No Comments:

Reviewed, Comments as Noted:

Reviewed, Comments Attached – Resubmit:

Rejected, Revise and Re-submit, Comments Attached:

Not Reviewed:

City Project Manager: Date:

Comments:

CITY OF SARASOTA, FLORIDA 02/20/2025

APPENDIX A-1

POTABLE WATER

APPROVED MATERIAL LIST

With the submission of this document, the CONTRACTOR understands that the use of the following selected items, as individually indicated using an “X”, is mandatory. The materials included in this list are approved for portable water service only.

Recommendations for Approved Alternates, using other items that are not contained within this Checklist, shall be initiated, and submitted by the CONTRACTOR, in accordance with Section 00800- General Provisions, to the CITY and the ENGINEER for review and approval at least ten (10) calendar days in advance of need.

It is also understood by the CONTRACTOR that the CITY and the ENGINEER shall reject materials and products not in accordance with this Specifications and this Checklist.

Shop drawings shall be required for all structures and similar items not contained on this checklist, such as manholes, wet wells, and other castings.

Four (4) sets of the CONTRACTOR’s and the ENGINEER’s executed APPROVED MATERIALS CHECKLIST and any necessary shop drawings shall be submitted to the CITY and the ENGINEER for its use and approval, plus the number of sets needed for the CONTRACTOR’s use.

Ordering material and products without specific written approval from the CITY of the submitted list and shop drawings is NOT recommended and is done at the CONTRACTOR’s sole expense and responsibility.

NOTE: The latest changes approved by the CITY are indicated by “underlining” and deleted items by “strikethroughs”.

American Iron and Steel, Buy American Act, or any procurement requirements identified in the contract documents shall take precedence over the materials listed in this checklist.

CONTENTS

Section 1: Valves and Accessories

Section 2: Service Materials

Section 3: Pipe Materials and Accessories

Section 4: Pipe Fittings

Section 5: Fire Hydrant Assemblies

Section 6: Metalwork

Section 7: Finishes

Section 8: Equipment

POTABLE WATER

APPROVED MATERIAL LIST

SECTION 1: VALVES AND ACCESSORIES

Automatic Combination Air / Vacuum Release Valve:

Manufacturer Part Number Comments H-Tec Model 986, 989, 990 Short Body for 989 Val-Matic 100 Series

ARI D-040

Air / Vacuum Release Valve Enclosure (Horizontal Venting and Medium Blue):

Manufacturer Part Number Comments Water Plus 107-B

Air Vacuum / Release Valve Vault Frame and Cover:

Manufacturer Part Number Comments US Foundry USF-679-BK-M Certain Teed Parmex 36” Alternative – Not to be used in paved driveways.

Blow Off Valve:

Manufacturer Part Number Comments Mueller Hydro Guard HG-2 2-Inch inlet, no lead brass

Low profile green enclosure

Gate Valves 14-Inch Through 48-Inch (C-515, Resilient Seated, with Side Actuators, if required)

Manufacturer Part Number Comments American 2500 Series with Romac Alpha Ends or MJ Mueller A-2361 McWane/Clow F-6100 Series

Gate Valves 3-Inch Through 12-Inch (C-515, Resilient Seated Only):

Manufacturer Part Number Comments American 2500 Series with Romac Alpha Ends or MJ Mueller A-2361 McWane/Clow F-6100 Series

POTABLE WATER

APPROVED MATERIAL LIST

Insertion – Valves:

Manufacturer

TEAM

Hydra-Stop

Part Number Insert-Valve 4” – 12”

IV-250 / IVP

Comments

Sample Station (Above Grade) (Blue Color):

Manufacturer Koraleen Enterprises Station Guard

Part Number

XLT # 001-3

Comments

Tapping Valves (C-515, Resilient Seated Only):

Manufacturer American Flow Control Mueller

Part Number Series 2500

Series T-2361

Comments

Test Station Box for Locate Wiring:

Manufacturer Bingham / Taylor

Part Number

P2B200NFG

Comments

Valve Box with Lids (5 ¼ - Inch, ASTM A48 30B Heavy Duty Cast or Ductile Iron with “Water” Cast into the Lid Top:

Manufacturer Part Number Comments Tyler / Union 461-S, 462-S, 6850, 6860 Must be Cast in USA Bingham & Taylor I5B20, I5B18

Valve Box Stabilizer:

Manufacturer Part Number Comments Bingham & Taylor APD900001B

Valve Box Debris Cap:

Manufacturer Part Number Comments Bingham & Taylor ODSDEBRISP12B

POTABLE WATER

APPROVED MATERIAL LIST

SECTION 2: SERVICE MATERIALS

Service Saddles (Bronze or Stainless-Steel Body, Double Stainless-Steel or Bronze) Straps to Iron Pipe Thread ONLY (Not for HDPE):

Manufacturer Part Number Comments Mueller BR2B Series Ford 202BSD, 202B

JCM 406

Total Piping Solutions Series T3

Service Saddles (316 Stainless-Steel Full Wrap EDPM Gaskets, for HDPE Must Have Belleville Washers) Iron Pipe Thread:

Manufacturer Part Number Comments Ford FS 313, FS 323, FS 333

Curb Stop / Service Line (Curb Stop to be Ball Type, FIP x CTS, FIP x Quick Joint, Must Have Locking Wing, 1-Inch or 2-Inches Only):

Manufacturer Part Number Comments Ford B41-444W-Q-NL

B41-777W-Q-NL

Mueller B25171N A.Y. McDonald 76102WQ1

76102WQ2

Curb Stop for ARV or Main (Curb Stop to be Ball Type, FIP x FIP, 1-Inch or 2-Inch):

Manufacturer Part Number Comments Ford B11-444W-NL

B11-777W-NL

Mueller B-20283N A.Y. McDonald 76101W Leemco, Inc., USA 316-Series Stainless Steel Sizes 1”, 1” ANGEL, 2” www.Ferguson.com/Waterworks

Corporation Stop for Service Line (Ball Type, MIP x CTS, MIP x Quick Joint, Iron Pipe Thread Only:

Manufacturer Part Number Comments Ford (Continued) FB1100-4-Q-NL

FB1100-7-Q-NO

Mueller B-25028N www.Ferguson.com/Waterworks

POTABLE WATER

APPROVED MATERIAL LIST

Corporation Stop for Service Line (Ball Type, MIP x CTS, MIP x Quick Joint, Iron Pipe Thread Only Continued:

A.Y. McDonald 74704BQ1

74704BQ2

Corporation Stops for Bass Nipple Installation (Ball Type, MIP x FIP, Iron Pipe Thread Only):

Manufacturer Part Number Comments Ford FB1700-7-NL Mueller B-20046N A.Y. McDonald 73149B

Polyethylene Tubing (Blue in Color with UV Protection, SDR-9, 1-Inch, and 2-Inch Only):

Manufacturer Part Number Comments Endot PE-4710 EndoPure Endot PE-4710 EndoTrace Alternative Pipe & Tracer Wire Combo Charter Plastics PE-4170 ARNCO PE-4710 Perma-Guard Alternative Pipe & Tracer Wire Combo ARNCO PE-4170 Perma-Find ADS PolyFlex

Cross Connection Control Assemblies:

Manufacturer Part Number Comments Zurn / Wilkins 375, 375XL, 975XL

Meter Box (Small Plastic with Cast Iron Reader Door):

Manufacturer Part Number Comments Highline 170113

Meter Box (Jumbo Plastic With 4” x 7” CI Reader Door):

Manufacturer Part Number Comments DFW Plastics DFW1600.12

Meter Box (Cast Iron, Oval, Blue Lid):

Manufacturer Part Number Comments Star Pipe Products MDB 1910 Made in USA https://DFW1600.12

POTABLE WATER

APPROVED MATERIAL LIST

Meter Box (Composite, Straight Wall, Cast Iron Reader Lid, Bolt Down Lid, 2 Mouse Holes, Tier 22):

Manufacturer

CDR

Part Number 17x30 – PG1730H00

11x18 – A6001429HDA

Comments

SECTION 3: PIPE MATERIALS AND ACCESSORIES

PVC Pipe (AWWA C-900, Blue in Color, DR-18):

Manufacturer Part Number Comments Certainteed C-900 RJIB Diamond Plastic Ipex J-M Manufacturing National Pipe Pipeline Plastics PE4710 Westlake Pipe & Fittings

Ductile Iron Pipe Cement Lined (4-Inch to 12-Inch = PC 350, 16-Inch to 20-Inch= PC 250, 24- Inch to 64-Inch = PC 200) (DI Flanges as Applicable, AWWA C115):

Manufacturer Part Number Comments American Clow Griffin McWane US Pipe

HDPE Pipe (DR-11, Blue Striped):

Manufacturer Part Number Comments Discopipe Series 100 Chevron Plexco

FRPM (Fiberglass Reinforced Polymer Mortar) Pipe:

Manufacturer Part Number Comments HOBAS Pipe USA, Inc. Filament Wound Pipe

POTABLE WATER

APPROVED MATERIAL LIST

Casing Spacers (All Sizes) Stainless Steel with Vinyl Runners:

Manufacturer Part Number Comments Cascade Series CCS / CCPS / AZ RACI Series S/T, F/G, P/Q, M/N, E/H

BWM SS

Potable Water Main Identification Tape (Blue, 6-Inches Wide, 2-Inch High Black Lettering, Adhesive Backed):

Manufacturer Part Number Comments Pro-Line

Buried Potable Water Main Warning Tape (Blue, 3-Inches Wide, 1-Inch High Black Lettering, Non-Adhesive Backed):

Manufacturer Part Number Comments Pro-Line

Poly Pig:

Manufacturer Part Number Comments Girard Knapp

Locating Wire (Single Strand, 12-Guage, Solid Copper Wire with Blue Colored Insulated Covering):

Manufacturer Part Number Comments Copperhead CCS (Reinforced Tracer Wire) 1230 HS Open Cut Installation Copperhead CCS (Reinforced Tracer Wire) 1245 HS HDD Installation

Locating Marker Systems (Potable Water) (Blue in Color):

Manufacturer Part Number Comments 3M Scotch Mark EMSII Electronic marker blue locator #1265 As required by COSU 3M Scotch Marker Electronic Ball

Marker #1404 As required by COSU

POTABLE WATER

APPROVED MATERIAL LIST

Curb and Pavement Markers (Blue in Color, imprinted with the Words “CITY OF SARASOTA UTILITIES” and “CALL 811 BEFORE YOU DIG” with “POTABLE WATER SERVICE” or “POTABLE WATER VALVE” as Applicable:

Manufacturer Rhino Rhino DAS Manufacturing

Part Number ATAGNCT-C (Custom Imprinting)

ATAGNCT-C (Custom Imprinting) Reflective Duracast Style (Custom Imprinting)

Comments New Construction Retrofit to existing improvements

New Retrofit or Construction

SECTION 4: PIPE FITTINGS

Expansion Joints:

Manufacturer EBAA Iron Metraflex Star

Part Number

Star Flex Series 5000, 5100 & 5200

Comments

Fittings C153 SSB / C110 Flange (Cement Mortar Lined and Asphaltic Coated in Accordance with C104) (Outside Surfaces Shall be Prime Coated Only if Located Aboveground and Painted:

Manufacturer Part Number Comments American Romac Alpha or MJ Ends Tyler / Union US Pipe Sigma Star SIP Industries

Restrained Joints – Ductile Iron Pipe:

Manufacturer Part Number Comments American Cast Iron Pipe Flex, Field Flex, and Lock Ring US Pipe TYTON® HDSS

Mechanical Restrained Joints – Ductile Iron Pipe:

Manufacturer Part Number Comments EBAA Iron Inc. Mega-Lug Series 1100

Series 1700 Bell Strainer Series RS-3800 Restrainer Sleeve Included

POTABLE WATER

APPROVED MATERIAL LIST

Mechanical Restrained Joints – Ductile Iron Pipe Continued:

Sigma One LOK SLD, PV LOK Star Stargrip Series 3000, 3000S & 3000OS

Series 3100S & 3100P for DI Pipe Use Flange Adapter Series 200 & 400 Retainer Gland Series 600 Adapter Flange Series 3200

Tyler / Union Tuf Grip TLD Series SIP EZ Grip US Pipe

Mechanical Restrained Joints – PVC Pipe:

Manufacturer Part Number Comments EBAA Iron Inc. Mega-Lug Series 2000PV

Series 1500 & 1600 Bell Restrainer 4” – 12” Series RS-3800 Restrainer – Sleeve Included

JCM 620 Sur-Grip Bell Joint 621 Sur-Grip Bell Joint

Ford Uni-Flange 1350 Bell Restrainer 1360 Bell Restrainer 1390 Bell Restrainer 900 Adapter Flange

1500 Series 1300 Fitting Restrainer

Sigma One LOK SLC, PV LOK Series PVP and PVPF

Star PVC Stargrip Series 4000 & 4000P

PVC Harness Series 1000, 1100 & 1200 Adapter Flange Series 200, 400 & 4200

Tyler / Union Tuf Grip TLP For PVC Pipe Use SIP EZ Grip Ransom International Rieberlock

Tapping Sleeves (For All Taps on IPS OD PVC Pipe, Including Size on Size (18-8 Type 304 Stainless Steel Body, Flange and Bolts), Flange to Accept Standard Tapping Valves:

Manufacturer Part Number Comments Ford Series FTSS

POTABLE WATER

APPROVED MATERIAL LIST

Tapping Sleeves (For All Taps on IPS OD PVC Pipe, Including Size on Size (18-8 Type 304 Stainless Steel Body, Flange and Bolts), Flange to Accept Standard Tapping Valves Continued:

JCM Model 432 Mueller Series H-304 S/S Cascade CST-EX

Tapping Sleeves (Mechanical Joint for all Taps on Cast Iron, Ductile Iron, PVC-900 & AC Pipe, all Taps Including Size on Size:

Manufacturer American Flow Control Mueller

Part Number Series 2800 Series H-615, H-616, H-619

Comments

Tapping Sleeves (Fabricated Steel, Mechanical Joint, Fusion Bonded Epoxy Coated):

Manufacturer Part Number Comments JCM Series 414

Flange Adapters:

Manufacturer Part Number Comments Rockwell International Type 913 Baker Type 602 Dresser International Type 128 Smith Blair Type 900

Anti-Seize Lubricants:

Manufacturer Part Number Comments Never Seize Bostik

Pipe Repair / Transition Couplings:

Manufacturer Part Number Comments Hymax 3”, 14” or larger AC-PVC/DI Romac Alpha 4” – 12” PVC/DI/HDPE to PVC/DI/HDPE Romac Macro 4” – 12” AC-PVC/DI

POTABLE WATER

APPROVED MATERIAL LIST

Line Stop Fittings (Check with line stopping contractor for insertion plug type):

Manufacturer Part Number Comments Hydra Stop HSF 250 Total Piping Solutions Triple Tap JCM (Continued) 440 4” – 8” stainless steel body and hardware, DIP completion plug, carbon steel blind flange (epoxy coated) 10” – 20” fabricated steel (epoxy coated) body, carbon steel flange, stainless hardware, DIP completion plug, epoxy coated blind flange 24” and larger – fabricated steel (epoxy coated) body, stainless hardware, carbon steel completion plug, and epoxy coated blind flange.

Pipe Repair Clamps:

Manufacturer Part Number Comments

JCM

Smith Blair Total Piping Solutions Quick Cam

SECTION 5: FIRE HYDRANT ASSEMBLIES

Fire Hydrants (5 ¼ Inch Valve Opening, Final Exterior Color – Ultraviolet Stabilized Lime Yellow (Pantone 12-0520 TCX)):

Manufacturer Part Number Comments American Darling B-84-B With Romac, Alpha, or MJ Ends Mueller Centurion A-423

SECTION 6: METALWORK

Gutter Type Hatches:

Manufacturer Part Number Comments Bilco Type J Babcock – Davis Type B-FGA

POTABLE WATER

APPROVED MATERIAL LIST

Hatch Nets:

Manufacturer Safe Approach

Part Number Hatch Net 121

Comments

Anti-Seize Lubricants:

Manufacturer Anti-Seize Technology Dixon Ticonderoga

Part Number Pure White

AS-470

Comments

Glass Capsule Polyester Resin Adhesive Anchors:

Manufacturer Part Number Hilti HVA Cobra Anchors

Comments

Expanding-Type Anchors:

Manufacturer Trubolt Anchors McCullock Industries

Part Number ITW Ramset/Redhead Kwick-Bolt

Comments

Impact Anchors:

Manufacturer Hilti, Inc.

Rawplug Company

Part Number Metal Hit Anchors Rawl Zamac Nailin

Comments

Coatings:

Manufacturer Sherwin-Williams Alvin Products ZRC Worldwide

Part Number Zinc-Clad XL

Galvax Galvite

Comments

SECTION 7: FINISHES

Paints:

Manufacturer Tnemec Carbolline Ameron

Part Number Comments

POTABLE WATER

APPROVED MATERIAL LIST

Paints Continued:

International Coating, Inc.

Epoxy Polyamide Fillers:

Manufacturer Tnemec Topcoat Ameron Nu-Klad Keeler & Long

Part Number 54-660 Epoxy Block Filler

Kolor No. 3400

Comments

Epoxy Polyamide:

Manufacturer Tnemec Carboline Ameron Keeler & Long

Part Number 66-Color H.B. Epoxoline

Amercoat

Kolor-Poxy Primer No. 3200

Comments

Bond Coat:

Manufacturer Kop-Coat Keeler & Long

Part Number Bitumastic No. 300-M

CT 400

Comments

Coal Tar Epoxy:

Manufacturer Kop-Coat Keeler & Long

Part Number Bitumastic No. 300-M

CT 400

Comments

Conditioner:

Manufacturer Kop-Coat Keeler & Long

Part Number Bitumastic 2CB

CT 300

Comments

Acrylic Coating:

Manufacturer Tnemec Carboline Keeler & Long

Part Number Series 130-6602 Envirofill

Flexxide

Comments

POTABLE WATER

APPROVED MATERIAL LIST

Acrylic Emulsion:

Manufacturer Tnemec Carboline Keeler & Long

Part Number Series 180 WB Tneme-crete D3359 Aqua-Kolor Enamel W-2 Series

Ferrous Metal Epoxy Polyamide Primer:

Manufacturer Part Number Tnemec (Continued) 66-1211 Epoxy Primer Carboline 893 Primer Ameron Americoat 71 Keeler & Long Kolor-Poxy Primer

Ferrous Metal Epoxy Polymide:

Manufacturer Part Number Tnemec 66-Color H.B. Epoxoline Kop-Coat Hi-Gard Epoxy Carboline 890 Epoxy Keeler & Long Kolor-Poxy Primer

Aliphatic Polyurethane:

Manufacturer Part Number Tnemec 72-Color Endura Carboline 134 Ameron Amercoat Keeler & Long Acrythane Enamel

Aliphatic Polyurethane (When Using Roller):

Manufacturer Part Number Tnemec 70 Carboline 134 (for roller) Ameron Amerishield Keeler & Long Acrythane Enamel Y-1 Series

Epoxy Polyamide:

Manufacturer Part Number Tnemec 140-1211 Porta-Pox Plus Kop-Coat 340 Gold Primer

Comments

Comments

Comments

Comments

Comments

POTABLE WATER

APPROVED MATERIAL LIST

Epoxy Polyamide Continued:

Carboline 187 Primer Ameron Amercoat 71 Keeler & Long Kolor-Proxy Primer No. 3200

Epoxy Amine-Cure:

Manufacturer Part Number Comments Tnemec 04 Carboline 187 Finish Use 187 primer when not using shop primer

Galvanized Steel Coating Wash Primer and/or Epoxy Polyamide:

Manufacturer Part Number Comments Tnemec 66-Color H.B. Epoxoline Carboline Rusbnd Primer/Sealer Ameron Amchem Galvaprep On Galvanized Steel

Amchem Aiodine 1200 Plus On Aluminum Ameron Amerlock 400 Keeler & Long Vinyl Brutyral Wash Primer # 7840 Kolor-Poxy Primer #3200 Aliphatic Polyurethane:

Manufacturer Part Number Comments Tnemec 72 Color Endura Shield 11 Kop-Coat Carboline Carbothane 134 H.S.

Ameron Amercoat 450 GL Keeler & Long Acrythane Enamel Y-1 Series

Aliphatic Polyurethane Gloss (When Using Roller):

Manufacturer Part Number Comments Tnemec 70 Color Endura Shield Kop-Coat Carboline Ameron Amershield Keeler & Long Acythane Enamel Y-1 Series

Alternate Coating Systems:

Manufacturer Part Number Comments Carboline Galvanox Type 1 Keeler & Long No. 6820

POTABLE WATER

APPROVED MATERIAL LIST

Zinc Chromate Primer:

Manufacturer Carboline Keeler & Long

Part Number

1037WP

Vinyl-Brutyral Wash Primer # 7840

Comments

Aluminum Pigmented Epoxy Paint:

Manufacturer Carboline Keeler & Long

Part Number Comments Carbomastic 90

Kolormastic No. 1000

Coal Tar Epoxy (High Build):

Manufacturer Tnemec Kop-Coat Ameron Keeler & Long

Part Number 46H-413

Bitumastic No. 300-M Amercoat 78HB

CT 400

Comments

Quality Control:

Manufacturer Tinker & Rasor K-D Bird Dog Holiday Detector

Part Number Comments

SECTION 8: EQUIPMENT

Mechanical Seals:

Manufacturer John Crane Pak Seal Chesterton

Part Number Type 128

Comments

Gaskets and Packings:

Manufacturer Garlock John Crane

Part Number No. 432

Everseal

POTABLE WATER

APPROVED MATERIAL LIST

Plate Thrust Bearings:

Manufacturer Kingsbury

Part Number

Centrifugal Pumps:

Manufacturer Flowserve (Continued) Goulds Aurora Floway

Part Number

Vertical Turbine Pumps:

Manufacturer Flowserve Ruhrpumpen Peabody Floway Weir

Part Number

Peristaltic Metering Pump:

Manufacturer Flowrox

Part Number

FXMS

Diaphragm Metering Pumps:

Manufacturer Grundfos

Part Number

Tools:

Manufacturer Snap On Crescent Stanley

Part Number

Annulus Fluid Expansion Tank System:

Manufacturer Part Number Hydro-Air Systems, Inc.

Comments

Comments

Comments

Comments

Comments

Comments

POTABLE WATER

APPROVED MATERIAL LIST

Primer:

Manufacturer Koppers

Coating:

Manufacturer Wisconsin Protective Coating Corporation

Part Number Pug Primer, 40 Passivator

Part Number 9051 Hi-Resistant Heavy Build

Protective Coating

Comments

Comments

Mixers:

Manufacturer

Kasco

CERTISAFE Potable Water Tank Mixers

Part Number Comments