Appendix_2_-_SREC_Data_Request.pdf

SREC Data Request

Revised: Dec 8, 2023 Page 1

The following data request applies to SREC applications greater than 1 MW DC. This information is required to assure the reliability and stability of the electric grid and compliance with COMAR regulations. Please make sure that your original documents remain as part of the application. This data request has been reviewed by PSC legal counsel.

1. Is this system collocated with other systems which total more than 2 MW? Please explain.

2. Do you have a PJM queue position for this project? If so,

a) What is the interconnection queue number?

b) Have you executed an IA or WMPA agreement?

i. Which agreement have you executed?

ii. Please provide the cover page and signature page with date (not the whole document)

iii. At your point of interconnection with the grid, what is the line voltage?

c) Do you intend to sell the output on the wholesale market? Please explain

3. Do you have a Certificate of Public Convenience and Necessity (CPCN) or CPCN exemption for this project?

a) Please provide the case number and order number.

b) What is the permissible rating for this project?

4. Is this a registered community solar project (CSEG)? Different regulations apply to CSEGs according to

COMAR 20.62.

a) What is your community solar project registration number?

b) Please describe the customer class for the subscriptions.

5. Is the AC output limited to 2 MWs AC for this project? Please provide a copy of the as-built drawing that shows the specification block for the AC output of the system. A complete set of as-built drawings is not necessary.

6. Is this project fixed tilt or a tracking system? This can affect the maximum AC output of the system?

Please explain.

7. Is the output of this system limited by the inverter? Please explain.

8. Are these projects net metered, aggregate net metered, or virtually net metered according to COMAR 20.50.10? Please explain.

9. Can the reactive power of this project be controlled remotely? Please explain. Future regulations are expected to require this function for smart inverters.

10. COMAR 20.61.02.01B(7) for SREC applications requires Certification that the applicant is substantially in compliance with all applicable environmental and administrative requirements under Public Utilities Article 7-704, Annotated Code of Maryland. Do you have zoning and/or environmental permits from any county or state agencies? Please provide sufficient details of these agreements.

If you have any questions or concerns please contact:

Craig Taborsky Executive Office Engineer craig.taborsky@maryland.gov

SREC Data Request

Revised: Dec 8, 2023 Page 2

Please use the following data request sample as a guide. The data request should be a letter of explanation addressing the requested questions individually. Please use your company logo and upload the appropriate documents, as-built drawings (clearly showing KW AC output of the project and its GPS location).

09/21/2023 Public Service Commission of Maryland William Donald Schaefer Tower 6 St. Paul Street, 16th Floor Baltimore, Maryland 21202

Dear Mr. Taborsky, Please see below for the additional information requested for the Maryland Public Service Commission solar applications for [Facility Name] and [Facility Address].

1. Is this system collocated with other systems which total more than 2 MW? Please explain.

No. These projects are considered co-located. Each of the projects was designed and built separately and distinctly. Each of the projects has its own interconnection agreement with [utility provide] and will be operated independently of one another as two separate standalone generating systems. Maryland Interconnection Agreement Certificates of Completion have been issued and executed for each.

2. Do you a PJM queue position for this project? If so, The projects are net-metered and qualify for aggregate net metering. The eligible customer-generator is Carrol County, Maryland. There is no interconnection queue.

a. Do you have a signed IA or WMPA agreement? N/A

b. What is your PJM interconnection queue? N/A

i. Which agreement you executed? N/A ii.Please provide the cover page and signature page with date (not the whole document) N/A iii.At your point of interconnection with the grid, what is the line voltage?

45KV

Please continue this format and leave your contact information at the end.