Amendment 1 for Bottles.docx
DOCX document 22 KB Posted
- Attached to
- Laboratory Sample Bottles
- Solicitation number
- 22-532EPA-ADMIN-B-28232
- Issued by
- St. Clair County, Illinois
About this file
This document is an Amendment 1 to a request for Laboratory Sample Bottles from the State of Illinois. The amendment addresses vendor questions regarding the specifications for the requested open-top vials with septa, as well as the acceptable liners for bottle/jar/jug caps. It confirms that either HDPE or LDPE plastic bottles are acceptable, and provides additional details on the specifications for line item #44, which requires an HDPE wide-mouth bottle.
The related State and Local Contract Opportunity is for Laboratory Sample Bottles, with the State of Illinois as the issuing agency. The solicitation requires electronic submissions only, per the Notice of Electronic Submissions policy. No other details about the contract opportunity are provided in the amendment.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| B-28232 Notice of Award SPO Signed.pdf | ||
| Forms B Section V.20.1~19.docx | DOCX document | |
| IFB Bottles - Final 03.21.2022 B-28232.docx | DOCX document | |
| Forms A Section V.18.1~3.docx | DOCX document | |
| Notice of Electronic Submissions~1.pdf | ||
| Bottle Amendment 2.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
22-532EPA-ADMIN-B-2823
Amendment 1 Vendor Questions
1. For all lines where OPEN TOP vials with Septa are requested, will 0.125” PTFE/silicone septa meet the State’s requirements? Do any of the OPEN TOP vials require 0.135” Septa?
We currently use 0.125” Septa and have not used/tried 0.135”. We want to keep it at 0.125”The instruments(methods) that would be directly involved if this were to change would be TOC and 524.3 THM, 524 VOC, 504, and 8260.
2 For all lines where bottles, jars, jugs are requested, does the State have any specific liner requirements for these container’s caps? Some were specific in the earlier bid.
Liners for caps All caps with liners are either Polyethylene foam-lined or PTFE (for method 525 and 548).
All caps without liners (all containers with preservative) must be leak-proof to prevent any sample and/or preservatives leaking out.
3 Line #12. Can you please confirm that LDPE is requested and not HDPE? Would HDPE be acceptable? Either HDPE or LDPW is acceptable Would a “Natural Round” bottle be acceptable since this is a plastic bottle? Yes
4 Line #44. Can you please provide additional specifications for this line? Type of plastic – HDPE? Jar, bottle, jug? Type of neck – wide or narrow? Any cap specifications? HDPE bottle wide mouth
File details come from the government source that posted it. Updated .