AK17182303.pdf
PDF 698 KB Posted
- Attached to
- 3 PRON Cylinder Assembly
- Solicitation number
- SPRDL126Q0056
About this file
This is a DD Form 2169 Special Packaging Instruction document dated July 21, 2025, specifying preservation, protection, and packaging requirements for a hydraulic linear cylinder (Part Number 402/L4661, CAGE 0JKF0, National Stock Number 3040-01-718-2303). The item weighs 83.6 pounds per unit pack with dimensions of 33.5 x 7.3 x 7.3 inches and has a cubic measurement of 1.033 cubic feet.
The packaging instruction mandates specific preservation and preparation steps including filling the cylinder with operational fluid, applying MIL-PRF-10924G preservative to all unpainted and unplated metallic surfaces and grease fittings, and sealing all interior openings with NAS 847 caps and plugs. The cylinder must be wrapped in MIL-PRF-121 Type II paper (24 x 36 inches) and secured with tape. Blocking and bracing consists of one piece of 2 x 4 x 12 lumber, one piece of 2 x 4 x 6 lumber, and two pieces of A-A55057 Type A blocking measuring 4-1/4 x 6 x ½ inches thick. The final unit container is an ASTM-D6880 Class 2, Standard Type 1 box measuring 30-1/2 x 5-3/4 x 4-1/4 inches. All preservation, packing, and container assembly must comply with MIL-STD-2073-1, MIL-STD-1186, and MIL-STD-129 standards. The document includes detailed diagrams illustrating the proper arrangement of blocking materials and cylinder placement within the shipping container.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL126Q0056-0001.pdf | ||
| SPRDL126Q0056.pdf | ||
| AK16780780.pdf | ||
| AK17182664.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved
OMB No. 0704-0188
-AI
AB
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
.402/L4661 (0JKF0) CYLINDER, HYDRAULIC, LINEAR 19207 AK17182303
4. NATIONAL STOCK NO. 6. REVISION
3040-01-718-2303
5. DATE
07-21-2025
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 83.6 1.033 33.5 X 7.3 X 7.3
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1, METHOD 20
13. CLEANING 1-B A/R PRESERVATIVE: OPERATIONAL FLUID
MIL-STD-2073-1 2-C A/R PRESERVATIVE: MIL-PRF-10924G
14. DRYING 3-D A/R CAPS/PLUGS: NAS 847
MIL-STD-2073-1 4-E 1 WRAP: MIL-PRF-121, TY II, SIZE 24 X 36
15. PACKING
5-F (2) BLOCKING/BRACING: ASTM-D6199
1 2 X 4 X 12
a. LEVEL A 1 2 X 4 X 6
MIL-STD-129 & NOTE I
K
6-G 2 BLOCKING/BRACING: A-A55057, TY A
b. LEVEL B 4-1/4 X 6 X ½” THICKNESS
NOT APPLICABLE
16. MARKING 7-H 1 CONTAINER: ASTM-D6880, CL 2, ST 1,
MIL-STD-129 SIZE: 30-1/2 X 5-3/4 X 4-1/4
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. FILL CYLINDER WITH OPERATIONAL FLUID.
C. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES AND TO GREASE (ZERK)
FITINGS.
D. SEAL ALL OPENINGS TO INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.
E. WRAP CYLINDER IN PAPER, SECURE WITH TAPE.
F. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING
TOGETHER USING NAILS/STAPLES CONFORMING TO ASTM-F1667, SEE PAGE 2.
G. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING
TOGETHER USING NAILS/STAPLES CONFORMING TO ASTM-F1667, SEE PAGE 2.
H. CLOSE CONTAINER IN ACCORDANCE WITH CONTAINER SPECIFICATION ASTM-D6880.
I. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188 AB
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
402/L4661 (0JKF0) CYLINDER, HYDRAULIC, LINEAR 19207 AK17182303
4. NATIONAL STOCK NO. 6. REVISION
3040-01-718-2303
5. DATE
07-21-2025
17. NOTES/DRAWING
2 X 4 X 12
QTY 1
2 X 4 X 6
QTY 1
4-1/4 X 6 X ½” PLY
QTY 2
FOR CLARITY,
CYLINDER IS SHOWN
WITHOUT PAPER WRAP
File details come from the government source that posted it. Updated .