AK16780780.pdf
PDF 211 KB Posted
- Attached to
- 3 PRON Cylinder Assembly
- Solicitation number
- SPRDL126Q0056
About this file
This is a DD Form 2169, Special Packaging Instruction, dated August 1, 2019, providing detailed packaging and preservation requirements for a Linear Reacting Cylinder (Part Number 400/X1035, CAGE 0JKF0, National Stock Number 3040-01-678-0780).
The document specifies comprehensive packaging procedures for a single unit weighing 13.6 pounds with dimensions of 29.4 x 4.4 x 4.8 inches. Preservation requirements include operational oil filling, caps/plugs per NAS-847 specification, and paper wrapping per MIL-PRF-121 Type II Grade A. Cushioning must conform to ASTM-D4727 Type CF Class D Grade 275 with specific dimensions (2 pieces of 3x60, 1 piece of 9x11, and 8 pieces of 4x4). Containers must meet ASTM-D5118 specifications for weather-resistant fiberboard (Level B) or wood-cleated panelboard per ASTM-D 6251 Type III Class 2 (Level A). All inspection, preservation, and packing activities must comply with MIL-STD-2073-1, MIL-STD-1186, and MIL-STD-129 marking standards. Closure and sealing must follow ASTM-D1974 Method 2B3. When total shipment quantity to a single destination exceeds 125 pounds, exterior packs must be palletized in accordance with MIL-STD-147. Page 2 includes photographic illustrations and dimensional diagrams showing proper wrapping techniques for the cylinder body and shaft.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL126Q0056-0001.pdf | ||
| SPRDL126Q0056.pdf | ||
| AK17182303.pdf | ||
| AK17182664.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-AI
MP
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
. 400/X1035 (0JKF0) CYLINDER, LINEAR, REACTING 19207 AK16780780
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-678-0780 08-01-2019
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 13.6 0.359 29.4 X 4.4 X 4.8
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1E, METHOD 20
13. CLEANING 1-B A/R PRESERVATIVE: OPERATIONAL OIL
MIL-STD-2073-1E 2-C A/R CAPS/PLUGS: NAS-847
14. DRYING 3-D 1 WRAP: MIL-PRF-121, TY II, GR A, SIZE: 10 X 32
MIL-STD-2073-1E 4-E (11) CUSHIONING: ASTM-D4727, TY CF, CL D,
15. PACKING
GR 275, VR SW
2 3 X 60
a. LEVEL A
1 9 X 11
MIL-STD-2073-1E & NOTE G 8 4 X 4
b. LEVEL B
5-F 1 CONTAINER: ASTM-D5118, TY CF, ST FOL, CL WR,
MIL-STD-2073-1E & NOTE G GR W5c, VR SW, SIZE: 29 X 4 X 4
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. FILL WITH OPERATIONAL OIL.
C. SEAL ALL OPENINGS TO INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.
D. WRAP CYLINDER IN PAPER AND SECURE WITH TAPE.
E. PLACE CUSHIONING AS SHOWN ON PAGE 2.
F. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.
G. LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D
6880, CLASS 2.
LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,
CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,
CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.
WHEN TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS,
EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -AI OMB No. 0704-0188 MP
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
400/X1035 (0JKF0) CYLINDER, LINEAR, REACTING 19207 AK16780780
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-678-0780 08-01-2019
17. NOTES/DRAWING
WRAP 3 X 60 CORRUGATED
AROUND CYLINDER BODY,
SECURE WITH TAPE
2 PLACES
4 X 4
QTY 8
WRAP 9 X 11 CORRUGATED
AROUND CYLINDER SHAFT,
SECURE WITH TAPE
FLUTE DIRECTION
11 INCHES
IN
C H
E S
File details come from the government source that posted it. Updated .