Solicitation___AG-82MK-S-15-0006.pdf

AG-82MK-S-15-0006

SOLICITATION, OFFER AND AWARD

4. TYPE OF SOLICITATION2. CONTRACT NUMBER 3. SOLICITATION NUMBER

7. ISSUED BY CODE 8. ADDRESS OFFER TO (If other than Item 7)

ORDER UNDER DPAS (15 CFR 700)

6. REQUISITION/PURCHASE NUMBER

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

NEGOTIATED (RFP)

SEALED BID (IFB)

5. DATE ISSUED

1. THIS CONTRACT IS A RATED RATING PAGE OF PAGES

1 70

C. E-MAIL ADDRESS

EXT.NUMBERAREA CODE

B. TELEPHONE (NO COLLECT CALLS)A. NAME

10. FOR

INFORMATION

CALL:

CAUTION: LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

(Date)(Hour) local timeuntildepository located in copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if hand carried, in the

SOLICITATION

9. Sealed offers in original and

PART IV - REPRESENTATIONS AND INSTRUCTIONS

OTHER STATEMENTS OF OFFERORS

EVALUATION FACTORS FOR AWARD

INSTRS., CONDS., AND NOTICES TO OFFERORS

REPRESENTATIONS, CERTIFICATIONS AND

LIST OF ATTACHMENTS

CONTRACT CLAUSES

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.

I

J

K

L

M SPECIAL CONTRACT REQUIREMENTS

CONTRACT ADMINISTRATION DATA

DELIVERIES OR PERFORMANCE

INSPECTION AND ACCEPTANCE

PACKAGING AND MARKING

DESCRIPTION/SPECS./WORK STATEMENT

SUPPLIES OR SERVICES AND PRICES/COSTS

SOLICITATION/CONTRACT FORM

PART II - CONTRACT CLAUSESPART I - THE SCHEDULE

H

G

F

E

D

C

B

A

SEC. DESCRIPTION PAGE(S) (X) DESCRIPTION SEC. (X)

11. TABLE OF CONTENTS

18. OFFER DATE17. SIGNATURE

SUCH ADDRESS IN SCHEDULE.

IS DIFFERENT FROM ABOVE - ENTER

15C. CHECK IF REMITTANCE ADDRESS

EXT.NUMBERAREA CODE

15B. TELEPHONE NUMBER

(Type or print)AND

ADDRESS

OF

OFFEROR

CODE FACILITY

16. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER15A. NAME

DATEAMENDMENT NO.DATEAMENDMENT NO.

and related documents numbered and dated):

amendments to the SOLICITATION for offerors

(The offeror acknowledges receipt of

14. ACKNOWLEDGEMENT OF AMENDMENTS

CALENDAR DAYS (%)30 CALENDAR DAYS (%)20 CALENDAR DAYS (%)10 CALENDAR DAYS (%)

(See Section I, Clause No. 52.232.8)

13. DISCOUNT FOR PROMPT PAYMENT

designated point(s), within the time specified in the schedule.

by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the

12. In compliance with the above, the undersigned agrees, if this offer is accepted within ______________ calendar days (60 calendar days unless a different period is inserted

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

OFFER (Must be fully completed by offeror)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

28. AWARD DATE

(Signature of Contracting Officer)

27. UNITED STATES OF AMERICA

25. PAYMENT WILL BE MADE BY

26. NAME OF CONTRACTING OFFICER (Type or print)

CODE 24. ADMINISTERED BY (If other than Item 7)

ITEM

(4 copies unless otherwise specified)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN

41 U.S.C. 253 (c) ( 10 U.S.C. 2304 (c) (

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

21. ACCOUNTING AND APPROPRIATION20. AMOUNT19. ACCEPTED AS TO ITEMS NUMBERED

AWARD (To be completed by government)

CODE

05/14/2015 X

82MK

GRAND MESA UNCOMPAHGRE GUNNISON N

2250 HIGHWAY 50

DELTA CO 81416

USFS - GMUG

Attn: Jay Tobin (jtobin@fs.fed.us) 2250 Highway 50 Delta CO 81416

DEPO1 1500 MT 06/15/2015

JAY G TOBIN 970

jtobin@fs.fed.us

874-6625

X

X

X

X

X

X

X

X

X

X

X

X

X

PAGE(S)

JAY G. TOBIN

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition is unusable

STANDARD FORM 33 (Rev. 9-97)

Prescribed by GSA - FAR (48 CFR) 53.214(c) one

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 70

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

AG-82MK-S-15-0006

(A) (B) (C) (D) (E) (F)

ROAD MAINTENANCE IDIQ FOR THE GRAND

MESA-UNCOMPAHGRE-GUNNISON NATIONAL FORESTS

The project objective is to perform maintenance on designated Forest Service System roads as further detailed in Sections B and C.

Set Aside: Total Small Business

EQUAL OPPORTUNITY CLAUSE

The U.S. Department of Agriculture (USDA) prohibits discrimination in all its programs and activities on the basis of race, color, national origin, age, disability, and where applicable, sex, marital status, familial status, parental status, religion, sexual orientation, genetic information, political beliefs, reprisal, or because all or part of an individual's income is derived from any public assistance program. (Not all prohibited bases apply to all programs.)

Persons with disabilities who require alternative means for communication of program information

(Braille, large print, audiotape, etc.) should contact USDA's TARGET Center at (202)720-2600

(voice and TDD). To file a complaint of discrimination, write to USDA, Director, Office of Civil Rights, 1400 Independence Avenue, S.W., Washington, DC 20250-9410, or call (800) 795-3272

(voice) or (202) 720-6382 (TDD). USDA is an equal opportunity provider and employer.

Road Maintenance IDIQ

OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

NSN 7540-01-152-8067

Road Maintenance IDIQ

Grand Mesa-Uncompahgre-Gunnison NF

TABLE OF CONTENTS

SECTION B - Schedule of Items

SECTION C - Statement of Work

SECTION D - Packaging and Marking

SECTION E - Inspection and Acceptance

SECTION F - Deliveries or Performance

SECTION G - Contract Administration Data

SECTION H - Special Contract Requirements

SECTION I - Contract Clauses

SECTION J - List of Documents, Exhibits, and Other Attachments

SECTION K - Representations, Certifications, and Other Statements of Offerors

SECTION L - Instructions, Conditions, and Notices to Offerors or Respondents

SECTION M - Evaluation Factors for Award

SECTION B - Schedule of Items

GRAND VALLEY RANGER DISTRICT – BASE YEAR

Pay Item Description Unit Qty Unit

Price

Total

Price

807(1)a

Equipment, Motor grader (Articulated Frame), 140 Horse Power

Minimum.

HR 1

807(1)b

Equipment, Tractor (with Backhoe Attachment, 4-Wheel Drive) 70 horse power Minimum

807(1)c

Equipment, Front End Loader (4-Wheel Drive) 170 Horse Power

Minimum

807(1)d

Equipment, Dozer (Standard Crawler with Rippers) 150 Horse Power

807(1)e

Equipment, Excavator (Crawler Mounted) 135 Horse Power

807(1)f Equipment, Roller 8 to 10 tons, Smooth, Self-Propelled HR 1

807(1)g Equipment, Dump Truck, Diesel, 10 CY HR 1

807(1)h Equipment, Chainsaw 24 Inches HR 1

807(1)i Equipment, Whacker Compactor, 4.5 HP HR 1

897(1)j Equipment, Water Pump, 2 Inches HR 1

807(2) Moving, Truck Transport HR 1

807(3) Laborer HR 1

811(1) Water Mile 5

811(2) Surface Maintenance Level 4 and 5 Roads Mile 50

811(3) Surface Maintenance Level 3 Roads Mile 50

811(4) Surface Maintenance Level 2 Roads

Pass

Mile

813(1) Spot Surfacing, 1 ½” Minus CY 100

813(2) Spot Surfacing, ¾” Minus CY 200

813(3) Spot Surfacing, Pit Run CY 100

814(1) Deep Patching SY *

814(2) Skin Patching TON *

814(3) Pothole Patching SY *

815(1) Paved Surface Cleaning Pass

815(2) Paved Surface Cleaning Single Lane Mile *

815(3) Bridge Deck Cleaning Each *

816(1) Unpaved Shoulder Maintenance Side

819(1)a Riprap, Class I and II TON *

819(1)b Riprap, Class III and V TON *

819(1)c Riprap, Class VI and IX TON *

819(2) Riprap, Government Furnished CY *

819(3) Grout CY *

819(4) Grout Application Hour *

831(1) Clean and Reshape Drainage Ditch DM 10

Continuation – Grand Valley Ranger District – Base Year

Unit

Price

Total

Price

831(2) Clean and Reshape Lead-out Ditch Each *

831(3) Remove Vegetation Larger Than 1” and less than 6” in Diameter DM 30

831(4) Remove Vegetation 6 Inches or Larger in Diameter EACH 10

832(1) Removal and Disposal, Placement Method 1 CY 10

832(2) Removal and Disposal, Placement Method 2 CY 100

832(3) Haul YM 50

832(4) Compaction Method B CY 50

833(1)a Culvert Installation, 18 Inches Diameter, 16 Gauge LF *

833(1)b Culvert Installation, 24 Inches Diameter, 16 Gauge LF 500

833(1)c Culvert Installation, 36 Inches Diameter, 16 Gurage LF 300

833(1)d Culvert Installation, 48 Inches Diameter, 16 Gauge LF 100

833(2) Culvert Removal Each 100

833(3) Rolling Dip Installation Each 10

833(4) Rolling Dip Removal Each 100

833(5) Cross Ditch Installation Each 5

833(6) Cross Ditch Removal Each 5

833(7) Drivable Grade Dip Installation Each 5

833(8) Armored Rolling Dip Each 100

833(9) Armored Grade Dip Each 50

834(1) Clean and Recondition Culverts 24 Inches Diameter and under Each 50

834(2) Clean and Recondition Culverts Over 24 Inches Through 48 Inches Each 50

834(3) Clean Culverts and Recondition Over 48 Inches Diameter Each 20

834(4) Clean Ditches Mile 10

834(5) Clean Ditches and Drainage Structures Mile 5

834(6) Clean Drainage Structures Mile 10

835(1) Roadway Drainage Maintenance Miles 10

838(1) Maintenance for the Limited Use Mile *

837(1) Clean and Shape Drainage Dip, Native Surface Each 20

837(2) Clean Drainage Dip, Aggregate Surface Each 20

837(3) Reshape Drainage Dip, Aggregate Surface Each 20

837(4) Clean Bituminous Drainage Dips Each *

838(1) Maintenance For Limited Use Mile *

838(2) Log and Down Tree Removal Mile 20

838(3) Limited Use Blading Mile 20

838(4) Drivable Drain Dip Each 20

838(5) Cross Ditch Each *

842(1)a Cutting Roadway Vegetation, Both Sides Heavy Vegetation Mile 10

842(1)b Cutting Roadway Vegetation, Both Sides Moderate Vegetation Mile 10

842(1)c Cutting Roadway Vegetation, Both Sides Light Vegetation Mile 10

842(2)a Cutting Roadway Vegetation, One Side Heavy Vegetation Mile 10

842(2)b Cutting Roadway Vegetation, One Side Moderate Vegetation Mile 10

Continuation – Grand Valley Ranger District – Base Year

Unit

Price

Total

Price

842(2)c Cutting Roadway Vegetation, One Side Light Vegetation Mile 10

851(1) Logging Out Marked Trees Less than 24 Inches Diameter Each 20

851(2) Logging Out Marked Trees 24 inches Diameter and Over Each 20

851(3) Logging Out Unmarked Trees Less than 24 Inches Diameter Each 20

851(4) Logging Out Unmarked Trees 24 Inches Diameter or Over Each 20

851(5) Logging Out Unmarked Trees, all Trees Mile 20

854(1) Removal of Hazard Trees (24 Inches Diameter and Under) Each *

854(2) Removal of Hazard Trees (Over 24 Inches Diameter) Each *

854(3) Removal of Rocks and Stumps Each *

861(1) Maintain One-Lane Cattleguard Each 10

861(2) Maintain Two-Lane Cattleguard Each 10

861(3) Maintain Road Closure Gate Each 10

861(4) Maintain Jersey Barriers Each *

861(5) Maintain Retaining Wall LS *

861(6) Remove Road Closure Gate Each 2

861(7) Remove Jersey Barriers Each *

872(3) Replace Metal Sign Post Each 20

872(4) Replace Wood sign Post Each 20

872(5) Remount Sign (1 or 2 posts) Each 20

881(1) Mobilization LS 1

881(2) Mobilization Each 1

882(1) Equipment Moving for Section 811 Mile 5

882(2) Equipment Moving for Section 832 Mile 5

882(3) Equipment Moving Mile 10

883(1) Cleaning of Equipment Each 1

884(1) Straw Mulch Bale 5

891(1) Water for Sections 811 and 813 M Gal 2000

TOTAL

Notes:

1. Indicated quantities are estimates for initial (Base Year) task order and will be used to evaluate and compare submitted price proposals. Quantities marked with an asterisk (*) may be on subsequent task orders.

2. Provide a separate listing of all equipment for which prices have been quoted.

3. Provide Unit Price for ALL pay items, whether or not a quantity is indicated.

PAONIA RANGER DISTRICT – BASE YEAR

Price

Total

Price

807(1)f Equipment, Roller 8 to 10 tons, Smooth, Self-Propelled HR 1

807(1)g Equipment, Dump Truck, Diesel, 10 CY HR 1

807(1)h Equipment, Chainsaw 24 Inches HR 1

807(1)i Equipment, Whacker Compactor, 4.5 HP HR 1

897(1)j Equipment, Water Pump, 2 Inches HR 1

807(2) Moving, Truck Transport HR 1

807(3) Laborer HR 1

811(1) Water Mile 5

811(2) Surface Maintenance Level 4 and 5 Roads Mile 50

811(3) Surface Maintenance Level 3 Roads Mile 50

811(4) Surface Maintenance Level 2 Roads PM 100

813(1) Spot Surfacing, 1 ½” Minus CY 100

813(2) Spot Surfacing, ¾” Minus CY 200

813(3) Spot Surfacing, Pit Run CY 100

814(1) Deep Patching SY *

814(2) Skin Patching TON *

814(3) Pothole Patching SY *

815(1) Paved Surface Cleaning Pass

815(2) Paved Surface Cleaning Single Lane Mile *

815(3) Bridge Deck Cleaning Each *

816(1) Unpaved Shoulder Maintenance Side

819(1)a Riprap, Class I and II TON *

819(1)b Riprap, Class III and V TON *

819(1)c Riprap, Class VI and IX TON *

819(2) Riprap, Government Furnished CY *

819(3) Grout CY *

819(4) Grout Application Hour *

831(1) Clean and Reshape Drainage Ditch DM 10

831(2) Clean and Reshape Lead-out Ditch Each 30

831(3)

Remove Vegetation Larger Than 1 Inch and less than 6 Inches in

Diameter

DM 10

Continuation – Paonia Ranger District – Base Year

Unit

Price

Total

Price

831(4) Remove Vegetation 6 Inches or Larger in Diameter EACH 10

832(1) Removal and Disposal, Placement Method 1 CY 100

832(2) Removal and Disposal, Placement Method 2 CY 50

832(3) Haul YM 50

832(4) Compaction Method B CY *

833(1)a Culvert Installation, 18 Inches Diameter, 16 Gauge LF 500

833(1)b Culvert Installation, 24 Inches Diameter, 16 Gauge LF 300

833(1)c Culvert Installation, 36 Inches Diameter, 16 Gurage LF 100

833(1)d Culvert Installation, 48 Inches Diameter, 16 Gauge LF 100

833(2) Culvert Removal Each 10

833(3) Rolling Dip Installation Each 100

833(4) Rolling Dip Removal Each 5

833(5) Cross Ditch Installation Each 5

833(6) Cross Ditch Removal Each 5

833(7) Drivable Grade Dip Installation Each 100

833(8) Armored Rolling Dip Each 50

833(9) Armored Grade Dip Each 50

834(1) Clean and Recondition Culverts 24 Inches Diameter and under Each 50

834(2) Clean and Recondition Culverts Over 24 Inches Through 48 Inches Each 20

834(3) Clean Culverts and Recondition Over 48 Inches Diameter Each 10

834(4) Clean Ditches Mile 5

834(5) Clean Ditches and Drainage Structures Mile 10

834(6) Clean Drainage Structures Mile 10

835(1) Roadway Drainage Maintenance Miles *

838(1) Maintenance for the Limited Use Mile *

837(1) Clean and Shape Drainage Dip, Native Surface Each 20

837(2) Clean Drainage Dip, Aggregate Surface Each 20

837(3) Reshape Drainage Dip, Aggregate Surface Each 20

837(4) Clean Bituminous Drainage Dips Each *

838(1) Maintenance For Limited Use Mile *

838(2) Log and Down Tree Removal Mile 20

838(3) Limited Use Blading Mile 20

838(4) Drivable Drain Dip Each 20

838(5) Cross Ditch Each *

842(1)a Cutting Roadway Vegetation, Both Sides Heavy Vegetation Mile 10

842(1)b Cutting Roadway Vegetation, Both Sides Moderate Vegetation Mile 10

842(1)c Cutting Roadway Vegetation, Both Sides Light Vegetation Mile 10

842(2)a Cutting Roadway Vegetation, One Side Heavy Vegetation Mile 10

842(2)b Cutting Roadway Vegetation, One Side Moderate Vegetation Mile 10

842(2)c Cutting Roadway Vegetation, One Side Light Vegetation Mile 10

851(1) Logging Out Marked Trees Less than 24 Inches Diameter Each 20

Continuation – Paonia Ranger District – Base Year

Unit

Price

Total

Price

851(2) Logging Out Marked Trees 24 inches Diameter and Over Each 20

851(3) Logging Out Unmarked Trees Less than 24 Inches Diameter Each 20

851(4) Logging Out Unmarked Trees 24 Inches Diameter or Over Each 20

851(5) Logging Out Unmarked Trees, all Trees Mile 20

854(1) Removal of Hazard Trees (24 Inches Diameter and Under) Each -

854(2) Removal of Hazard Trees (Over 24 Inches Diameter) Each -

854(3) Removal of Rocks and Stumps Each -

861(1) Maintain One-Lane Cattleguard Each 10

861(2) Maintain Two-Lane Cattleguard Each 10

861(3) Maintain Road Closure Gate Each 10

861(4) Maintain Jersey Barriers Each -

861(5) Maintain Retaining Wall LS -

861(6) Remove Road Closure Gate Each 2

861(7) Remove Jersey Barriers Each -

872(3) Replace Metal Sign Post Each 20

872(4) Replace Wood sign Post Each 20

872(5) Remount Sign (1 or 2 posts) Each 20

881(1) Mobilization LS 1

881(2) Mobilization Each 1

882(1) Equipment Moving for Section 811 Mile 5

882(2) Equipment Moving for Section 832 Mile 5

882(3) Equipment Moving Mile 10

883(1) Cleaning of Equipment Each 1

884(1) Straw Mulch Bale 5

891(1) Water for Sections 811 and 813 M Gal 2000

TOTAL

Notes:

1. Indicated quantities are estimates for initial (Base Year) task order and will be used to evaluate and compare submitted price proposals. Quantities marked with an asterisk (*) may be on subsequent task orders.

2. Provide a separate listing of all equipment for which prices have been quoted.

3. Provide Unit Price for ALL pay items, whether or not a quantity is indicated.

GRAND VALLEY RANGER DISTRICT SCHEDULE II – OPTION YEAR ONE

Pay Item Description Unit

Price Total Price

HR

807(1)f Equipment, Roller 8 to 10 tons, Smooth, Self-Propelled HR

807(1)g Equipment, Dump Truck, Diesel, 10 CY HR

807(1)h Equipment, Chainsaw 24 Inches HR

807(1)i Equipment, Whacker Compactor, 4.5 HP HR

897(1)j Equipment, Water Pump, 2 Inches HR

807(2) Moving, Truck Transport HR

807(3) Laborer HR

811(1) Water Mile

811(2) Surface Maintenance Level 4 and 5 Roads Mile

811(3) Surface Maintenance Level 3 Roads Mile

811(4) Surface Maintenance Level 2 Roads PM

813(1) Spot Surfacing, 1 ½” Minus CY

813(2) Spot Surfacing, ¾” Minus CY

813(3) Spot Surfacing, Pit Run CY

814(1) Deep Patching SY

814(2) Skin Patching TON

814(3) Pothole Patching SY

815(1) Paved Surface Cleaning Pass

Mile

815(2) Paved Surface Cleaning Single Lane Mile

815(3) Bridge Deck Cleaning Each

816(1) Unpaved Shoulder Maintenance Side

Mile

819(1)a Riprap, Class I and II TON

819(1)b Riprap, Class III and V TON

819(1)c Riprap, Class VI and IX TON

819(2) Riprap, Government Furnished CY

819(3) Grout CY

819(4) Grout Application Hour

831(1) Clean and Reshape Drainage Ditch DM

831(2) Clean and Reshape Lead-out Ditch Each

831(3) Remove Vegetation Larger Than 1” and less than 6”in Diameter DM

831(4) Remove Vegetation 6 Inches or Larger in Diameter EACH

Continuation – Grand Valley Ranger District – Option Year One

Unit

Price Total Price

832(1) Removal and Disposal, Placement Method 1 CY

832(2) Removal and Disposal, Placement Method 2 CY

832(3) Haul YM

832(4) Compaction Method B CY

833(1)a Culvert Installation, 18 Inches Diameter, 16 Gauge LF

833(1)b Culvert Installation, 24 Inches Diameter, 16 Gauge LF

833(1)c Culvert Installation, 36 Inches Diameter, 16 Gurage LF

833(1)d Culvert Installation, 48 Inches Diameter, 16 Gauge LF

833(2) Culvert Removal Each

833(3) Rolling Dip Installation Each

833(4) Rolling Dip Removal Each

833(5) Cross Ditch Installation Each

833(6) Cross Ditch Removal Each

833(7) Drivable Grade Dip Installation Each

833(8) Armored Rolling Dip Each

833(9) Armored Grade Dip Each

834(1) Clean and Recondition Culverts 24 Inches Diameter and under Each

834(2) Clean and Recondition Culverts Over 24 Inches Through 48 Inches Each

834(3) Clean Culverts and Recondition Over 48 Inches Diameter Each

834(4) Clean Ditches Mile

834(5) Clean Ditches and Drainage Structures Mile

834(6) Clean Drainage Structures Mile

835(1) Roadway Drainage Maintenance Miles

838(1) Maintenance for the Limited Use Mile

837(1) Clean and Shape Drainage Dip, Native Surface Each

837(2) Clean Drainage Dip, Aggregate Surface Each

837(3) Reshape Drainage Dip, Aggregate Surface Each

837(4) Clean Bituminous Drainage Dips Each

838(1) Maintenance For Limited Use Mile

838(2) Log and Down Tree Removal Mile

838(3) Limited Use Blading Mile

838(4) Drivable Drain Dip Each

838(5) Cross Ditch Each

842(1)a Cutting Roadway Vegetation, Both Sides Heavy Vegetation Mile

842(1)b Cutting Roadway Vegetation, Both Sides Moderate Vegetation Mile

842(1)c Cutting Roadway Vegetation, Both Sides Light Vegetation Mile

842(2)a Cutting Roadway Vegetation, One Side Heavy Vegetation Mile

842(2)b Cutting Roadway Vegetation, One Side Moderate Vegetation Mile

842(2)c Cutting Roadway Vegetation, One Side Light Vegetation Mile

851(1) Logging Out Marked Trees Less than 24 Inches Diameter Each

851(2) Logging Out Marked Trees 24 inches Diameter and Over Each

Continuation – Grand Valley Ranger District – Opton Year One

Unit

Price Total Price

851(3) Logging Out Unmarked Trees Less than 24 Inches Diameter Each

851(4) Logging Out Unmarked Trees 24 Inches Diameter or Over Each

851(5) Logging Out Unmarked Trees, all Trees Mile

854(1) Removal of Hazard Trees (24 Inches Diameter and Under) Each

854(2) Removal of Hazard Trees (Over 24 Inches Diameter) Each

854(3) Removal of Rocks and Stumps Each

861(1) Maintain One-Lane Cattleguard Each

861(2) Maintain Two-Lane Cattleguard Each

861(3) Maintain Road Closure Gate Each

861(4) Maintain Jersey Barriers Each

861(5) Maintain Retaining Wall LS

861(6) Remove Road Closure Gate Each

861(7) Remove Jersey Barriers Each

872(3) Replace Metal Sign Post Each

872(4) Replace Wood sign Post Each

872(5) Remount Sign (1 or 2 posts) Each

881(1) Mobilization LS

881(2) Mobilization Each

882(1) Equipment Moving for Section 811 Mile

882(2) Equipment Moving for Section 832 Mile

882(3) Equipment Moving Mile

883(1) Cleaning of Equipment Each

884(1) Straw Mulch Bale

891(1) Water for Sections 811 and 813 MGal

PAONIA RANGER DISTRICT SCHEDULE II – OPTION YEAR ONE

Price Total Price

807(1)a Equipment, Motor grader (Articulated Frame), 140 Horse Power

807(1)h Equipment, Chainsaw 24 Inches HR

807(1)i Equipment, Whacker Compactor, 4.5 HP HR

807(1)j Equipment, Water Pump, 2 Inches HR

807(2) Moving, Truck Transport HR

807(3) Laborer HR

811(1) Water Mile

811(2) Surface Maintenance Level 4 and 5 Roads Mile

811(3) Surface Maintenance Level 3 Roads Mile

811(4) Surface Maintenance Level 2 Roads PM

813(1) Spot Surfacing, 1 ½” Minus CY

813(2) Spot Surfacing, ¾” Minus CY

813(3) Spot Surfacing, Pit Run CY

814(1) Deep Patching SY

814(2) Skin Patching TON

814(3) Pothole Patching SY

815(1) Paved Surface Cleaning Pass

Mile

815(2) Paved Surface Cleaning Single Lane Mile

815(3) Bridge Deck Cleaning Each

816(1) Unpaved Shoulder Maintenance Side

Mile

819(1)a Riprap, Class I and II TON

819(1)b Riprap, Class III and V TON

819(1)c Riprap, Class VI and IX TON

819(2) Riprap, Government Furnished CY

819(3) Grout CY

819(4) Grout Application Hour

831(1) Clean and Reshape Drainage Ditch DM

831(2) Clean and Reshape Lead-out Ditch Each

831(3) Remove Vegetation Larger Than 1” and less than 6” in Diameter DM

Continuation – Paonia Ranger District – Option Year One

Unit

Price Total Price

832(1) Removal and Disposal, Placement Method 1 CY

832(2) Removal and Disposal, Placement Method 2 CY

832(3) Haul YM

832(4) Compaction Method B CY

833(1)a Culvert Installation, 18 Inches Diameter, 16 Gauge LF

833(1)b Culvert Installation, 24 Inches Diameter, 16 Gauge LF

833(1)c Culvert Installation, 36 Inches Diameter, 16 Gurage LF

833(1)d Culvert Installation, 48 Inches Diameter, 16 Gauge LF

833(2) Culvert Removal Each

833(3) Rolling Dip Installation Each

833(4) Rolling Dip Removal Each

833(5) Cross Ditch Installation Each

833(6) Cross Ditch Removal Each

833(7) Drivable Grade Dip Installation Each

833(8) Armored Rolling Dip Each

833(9) Armored Grade Dip Each

834(1) Clean and Recondition Culverts 24 Inches Diameter and under Each

834(2) Clean and Recondition Culverts Over 24 Inches Through 48 Inches Each

834(3) Clean Culverts and Recondition Over 48 Inches Diameter Each

834(4) Clean Ditches Mile

834(5) Clean Ditches and Drainage Structures Mile

834(6) Clean Drainage Structures Mile

835(1) Roadway Drainage Maintenance Miles

838(1) Maintenance for the Limited Use Mile

837(1) Clean and Shape Drainage Dip, Native Surface Each

837(2) Clean Drainage Dip, Aggregate Surface Each

837(3) Reshape Drainage Dip, Aggregate Surface Each

837(4) Clean Bituminous Drainage Dips Each

838(1) Maintenance For Limited Use Mile

838(2) Log and Down Tree Removal Mile

838(3) Limited Use Blading Mile

838(4) Drivable Drain Dip Each

838(5) Cross Ditch Each

842(1)a Cutting Roadway Vegetation, Both Sides Heavy Vegetation Mile

842(1)b Cutting Roadway Vegetation, Both Sides Moderate Vegetation Mile

842(1)c Cutting Roadway Vegetation, Both Sides Light Vegetation Mile

842(2)a Cutting Roadway Vegetation, One Side Heavy Vegetation Mile

842(2)b Cutting Roadway Vegetation, One Side Moderate Vegetation Mile

842(2)c Cutting Roadway Vegetation, One Side Light Vegetation Mile

Continuation – Paonia Ranger District – Option Year One

Unit

Price Total Price

851(3) Logging Out Unmarked Trees Less than 24 Inches Diameter Each

851(4) Logging Out Unmarked Trees 24 Inches Diameter or Over Each

851(5) Logging Out Unmarked Trees, all Trees Mile

854(1) Removal of Hazard Trees (24 Inches Diameter and Under) Each

854(2) Removal of Hazard Trees (Over 24 Inches Diameter) Each

854(3) Removal of Rocks and Stumps Each

861(1) Maintain One-Lane Cattleguard Each

861(2) Maintain Two-Lane Cattleguard Each

861(3) Maintain Road Closure Gate Each

861(4) Maintain Jersey Barriers Each

861(5) Maintain Retaining Wall LS

861(6) Remove Road Closure Gate Each

861(7) Remove Jersey Barriers Each

872(3) Replace Metal Sign Post Each

872(4) Replace Wood sign Post Each

872(5) Remount Sign (1 or 2 posts) Each

881(1) Mobilization LS

881(2) Mobilization Each

882(1) Equipment Moving for Section 811 Mile

882(2) Equipment Moving for Section 832 Mile

882(3) Equipment Moving Mile

883(1) Cleaning of Equipment Each

GRAND VALLEY RANGER DISTRICT SCHEDULE II – OPTION YEAR TWO

Price

807(1)h Equipment, Chainsaw 24 Inches HR

807(1)i Equipment, Whacker Compactor, 4.5 HP HR

807(1)j Equipment, Water Pump, 2 Inches HR

807(2) Moving, Truck Transport HR

807(3) Laborer HR

811(1) Water Mile

811(2) Surface Maintenance Level 4 and 5 Roads Mile

811(3) Surface Maintenance Level 3 Roads Mile

811(4) Surface Maintenance Level 2 Roads PM

813(1) Spot Surfacing, 1 ½” Minus CY

813(2) Spot Surfacing, ¾” Minus CY

813(3) Spot Surfacing, Pit Run CY

814(1) Deep Patching SY

814(2) Skin Patching TON

814(3) Pothole Patching SY

815(1) Paved Surface Cleaning Pass

Mile

815(2) Paved Surface Cleaning Single Lane Mile

815(3) Bridge Deck Cleaning Each

816(1) Unpaved Shoulder Maintenance Side

Mile

819(1)a Riprap, Class I and II TON

819(1)b Riprap, Class III and V TON

819(1)c Riprap, Class VI and IX TON

819(2) Riprap, Government Furnished CY

819(3) Grout CY

819(4) Grout Application Hour

831(1) Clean and Reshape Drainage Ditch DM

831(2) Clean and Reshape Lead-out Ditch Each

Continuation – Grand Valley Ranger District – Option Year Two

Unit

Price Total Price

831(3) Remove Vegetation Larger Than 1” and less than 6”in Diameter DM

831(4) Remove Vegetation 6 Inches or Larger in Diameter EACH

832(1) Removal and Disposal, Placement Method 1 CY

832(2) Removal and Disposal, Placement Method 2 CY

832(3) Haul YM

832(4) Compaction Method B CY

833(1)a Culvert Installation, 18 Inches Diameter, 16 Gauge LF

833(1)b Culvert Installation, 24 Inches Diameter, 16 Gauge LF

833(1)c Culvert Installation, 36 Inches Diameter, 16 Gurage LF

833(1)d Culvert Installation, 48 Inches Diameter, 16 Gauge LF

833(2) Culvert Removal Each

833(3) Rolling Dip Installation Each

833(4) Rolling Dip Removal Each

833(5) Cross Ditch Installation Each

833(6) Cross Ditch Removal Each

833(7) Drivable Grade Dip Installation Each

833(8) Armored Rolling Dip Each

833(9) Armored Grade Dip Each

834(1) Clean and Recondition Culverts 24 Inches Diameter and under Each

834(2) Clean and Recondition Culverts Over 24 Inches Through 48 Inches Each

834(3) Clean Culverts and Recondition Over 48 Inches Diameter Each

834(4) Clean Ditches Mile

834(5) Clean Ditches and Drainage Structures Mile

834(6) Clean Drainage Structures Mile

835(1) Roadway Drainage Maintenance Miles

838(1) Maintenance for the Limited Use Mile

837(1) Clean and Shape Drainage Dip, Native Surface Each

837(2) Clean Drainage Dip, Aggregate Surface Each

837(3) Reshape Drainage Dip, Aggregate Surface Each

837(4) Clean Bituminous Drainage Dips Each

838(1) Maintenance For Limited Use Mile

838(2) Log and Down Tree Removal Mile

838(3) Limited Use Blading Mile

838(4) Drivable Drain Dip Each

838(5) Cross Ditch Each

842(1)a Cutting Roadway Vegetation, Both Sides Heavy Vegetation Mile

842(1)b Cutting Roadway Vegetation, Both Sides Moderate Vegetation Mile

842(1)c Cutting Roadway Vegetation, Both Sides Light Vegetation Mile

842(2)a Cutting Roadway Vegetation, One Side Heavy Vegetation Mile

842(2)b Cutting Roadway Vegetation, One Side Moderate Vegetation Mile

842(2)c Cutting Roadway Vegetation, One Side Light Vegetation Mile

Continuation – Grand Valley Ranger District – Opton Year Two

Unit

Price Total Price

851(1) Logging Out Marked Trees Less than 24 Inches Diameter Each

851(2) Logging Out Marked Trees 24 inches Diameter and Over Each

851(3) Logging Out Unmarked Trees Less than 24 Inches Diameter Each

851(4) Logging Out Unmarked Trees 24 Inches Diameter or Over Each

851(5) Logging Out Unmarked Trees, all Trees Mile

854(1) Removal of Hazard Trees (24 Inches Diameter and Under) Each

854(2) Removal of Hazard Trees (Over 24 Inches Diameter) Each

854(3) Removal of Rocks and Stumps Each

861(1) Maintain One-Lane Cattleguard Each

861(2) Maintain Two-Lane Cattleguard Each

861(3) Maintain Road Closure Gate Each

861(4) Maintain Jersey Barriers Each

861(5) Maintain Retaining Wall LS

861(6) Remove Road Closure Gate Each

861(7) Remove Jersey Barriers Each

872(3) Replace Metal Sign Post Each

872(4) Replace Wood sign Post Each

872(5) Remount Sign (1 or 2 posts) Each

881(1) Mobilization LS

881(2) Mobilization Each

882(1) Equipment Moving for Section 811 Mile

882(2) Equipment Moving for Section 832 Mile

882(3) Equipment Moving Mile

883(1) Cleaning of Equipment Each

PAONIA RANGER DISTRICT SCHEDULE II – OPTION YEAR TWO

Price

807(1)h Equipment, Chainsaw 24 Inches HR

807(1)i Equipment, Whacker Compactor, 4.5 HP HR

807(1)j Equipment, Water Pump, 2 Inches HR

807(2) Moving, Truck Transport HR

807(3) Laborer HR

811(1) Water Mile

811(2) Surface Maintenance Level 4 and 5 Roads Mile

811(3) Surface Maintenance Level 3 Roads Mile

811(4) Surface Maintenance Level 2 Roads PM

813(1) Spot Surfacing, 1 ½” Minus CY

813(2) Spot Surfacing, ¾” Minus CY

813(3) Spot Surfacing, Pit Run CY

814(1) Deep Patching SY

814(2) Skin Patching TON

814(3) Pothole Patching SY

815(1) Paved Surface Cleaning Pass

Mile

815(2) Paved Surface Cleaning Single Lane Mile

815(3) Bridge Deck Cleaning Each

816(1) Unpaved Shoulder Maintenance Side

Mile

819(1)a Riprap, Class I and II TON

819(1)b Riprap, Class III and V TON

819(1)c Riprap, Class VI and IX TON

819(2) Riprap, Government Furnished CY

819(3) Grout CY

819(4) Grout Application Hour

831(1) Clean and Reshape Drainage Ditch DM

831(2) Clean and Reshape Lead-out Ditch Each

831(3) Remove Vegetation Larger Than 1” and less than 6” in Diameter DM

Continuation – Paonia Ranger District – Option Year Two

Unit

Price Total Price

832(1) Removal and Disposal, Placement Method 1 CY

832(2) Removal and Disposal, Placement Method 2 CY

832(3) Haul YM

832(4) Compaction Method B CY

833(1)a Culvert Installation, 18 Inches Diameter, 16 Gauge LF

833(1)b Culvert Installation, 24 Inches Diameter, 16 Gauge LF

833(1)c Culvert Installation, 36 Inches Diameter, 16 Gurage LF

833(1)d Culvert Installation, 48 Inches Diameter, 16 Gauge LF

833(2) Culvert Removal Each

833(3) Rolling Dip Installation Each

833(4) Rolling Dip Removal Each

833(5) Cross Ditch Installation Each

833(6) Cross Ditch Removal Each

833(7) Drivable Grade Dip Installation Each

833(8) Armored Rolling Dip Each

833(9) Armored Grade Dip Each

834(1) Clean and Recondition Culverts 24 Inches Diameter and under Each

834(2) Clean and Recondition Culverts Over 24 Inches Through 48 Inches Each

834(3) Clean Culverts and Recondition Over 48 Inches Diameter Each

834(4) Clean Ditches Mile

834(5) Clean Ditches and Drainage Structures Mile

834(6) Clean Drainage Structures Mile

835(1) Roadway Drainage Maintenance Miles

838(1) Maintenance for the Limited Use Mile

837(1) Clean and Shape Drainage Dip, Native Surface Each

837(2) Clean Drainage Dip, Aggregate Surface Each

837(3) Reshape Drainage Dip, Aggregate Surface Each

837(4) Clean Bituminous Drainage Dips Each

838(1) Maintenance For Limited Use Mile

838(2) Log and Down Tree Removal Mile

838(3) Limited Use Blading Mile

838(4) Drivable Drain Dip Each

838(5) Cross Ditch Each

842(1)a Cutting Roadway Vegetation, Both Sides Heavy Vegetation Mile

842(1)b Cutting Roadway Vegetation, Both Sides Moderate Vegetation Mile

842(1)c Cutting Roadway Vegetation, Both Sides Light Vegetation Mile

842(2)a Cutting Roadway Vegetation, One Side Heavy Vegetation Mile

842(2)b Cutting Roadway Vegetation, One Side Moderate Vegetation Mile

842(2)c Cutting Roadway Vegetation, One Side Light Vegetation Mile

Continuation – Paonia Ranger District – Option Year Two

Unit

Price Total Price

851(3) Logging Out Unmarked Trees Less than 24 Inches Diameter Each

851(4) Logging Out Unmarked Trees 24 Inches Diameter or Over Each

851(5) Logging Out Unmarked Trees, all Trees Mile

854(1) Removal of Hazard Trees (24 Inches Diameter and Under) Each

854(2) Removal of Hazard Trees (Over 24 Inches Diameter) Each

854(3) Removal of Rocks and Stumps Each

861(1) Maintain One-Lane Cattleguard Each

861(2) Maintain Two-Lane Cattleguard Each

861(3) Maintain Road Closure Gate Each

861(4) Maintain Jersey Barriers Each

861(5) Maintain Retaining Wall LS

861(6) Remove Road Closure Gate Each

861(7) Remove Jersey Barriers Each

872(3) Replace Metal Sign Post Each

872(4) Replace Wood sign Post Each

872(5) Remount Sign (1 or 2 posts) Each

881(1) Mobilization LS

881(2) Mobilization Each

882(1) Equipment Moving for Section 811 Mile

882(2) Equipment Moving for Section 832 Mile

882(3) Equipment Moving Mile

883(1) Cleaning of Equipment Each

All unit prices noted here will be the maximum paid for those items. Specific task order pricing may be submitted at a lower rate.

Mobilization costs for these items will be included where each task order is priced out. The price to include here is the supply and installation of these items.

DESCRIPTION OF PAY ITEMS

1. Mobilization shall be paid one time per job. Mobilization will not be paid for the return trip to the base of operations, or for re-mobilization to the same project (e.g. equipment taken back to the base of operations for the weekend), unless agreed in advance by the Contracting Officer.

2. Mobilization covers the movement of personnel, equipment, supplies, and incidentals to the project area and performance of all activities necessary to accomplish work at the project site. It also includes permits, insurance and bonds. Requirements and provisions shall follow Section

881.

3. Pay Item 806 Regulatory Requirements. This section identifies the code and standards which apply to the work in this contract. No separate measurement or payment will be made for meeting requirements of this Section. All work and materials shall be incidental to paid work for this contract.

4. Pay Item 808 Work Area Management. No separate measurement or payment will be made for meeting requirements of this Section. All work and materials are incidental to paid work in this contract.

5. “Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects, FP-14”, U.S. Customary Units, is applicable for this project, and is included by reference only.

The requirements contained in these Standard Specifications are hereby made a part of this solicitation and any resulting work. These specifications can be viewed at no cost on the FHWA website, which also gives ordering information:

http://www.wfl.fha.dot.gov/design/specs/fp14.htm.

6. See Table 204-2 Tolerances on page 63 of the Specifications. Generally assume the level of tolerance will be Tolerance Class F.

7. Pay Item 892 Bituminous Products, Pay Item 893 Aggregate and Pay Item 894 Culvert Pipe. No separate measurement or payment will be made for meeting requirements of this Section. All work and materials are incidental to paid work in this contract.

8. Unless otherwise shown, work measured and paid for under one PAY ITEM, will not be paid for under any other PAY ITEM. The quantity to be paid for is the quantity DESIGNATED IN THE

SCHEDULE OF ITEMS. No payment will be made for work performed in excess of that staked, ordered, or otherwise authorized.

9. Payment will be made following satisfactory completion of task order at the unit rate as listed on each task order.

10. All disturbed areas in each task order shall be seeded and fertilized in accordance with requirements set forth in this section and are incidental.

11. Apply turf establishment to finished slopes and ditches as soon as possible after satisfactory completion of excavation. Do not seed during windy weather or when the ground is excessively wet, frozen, snow covered, extremely dry, cloddy, hard pan, or is otherwise untillable.

Application Methods for Seed & Fertilizer (if required):

Furnish the kinds of seed and the amounts to be applied in terms of pure live seed as follows:

Provide seed certification labels to the COR.

Quantity of Pure

Kind of Seed Live Seed (Lbs/Acre)

1. Mountain Brome Grass 5 lbs./acre (26%)

2. Slender Wheatgrass 3 lbs./acre (16%)

3. Thick Spike Wheatgrass 3 lbs./acre (16%)

4. Canby Bluegrass 3 lbs./acre (16%)

3. Blue Wild Rye 5 lbs./acre (26%)

Total 19 lbs./acre (100%)

Determine the pounds of seed to be furnished per acre by dividing the pounds of pure live seed required per acre by the product of the percent purity and percent germination.

Example 5 lbs. pure live seed/acre = 6.55 lbs. commercial seed per acre;

0.90 x 0.85 purity = 90% and germination = 85%

Apply seed by the dry method. Retest germination after 6 months of purchase if seeding has not been performed.

12. Seed. Conform to the Federal Seed Act, the Federal Noxious Weed Act, and applicable State and local seed and noxious weed laws. Seed shall be certified weed free. Do not use wet, moldy, or otherwise contaminated or damaged seed. Furnish each seed type in separate sealed container.

Clearly label each container with the following:

(a) Name and type of seed

(b) Lot number

(c) Net mass

(d) Percent of purity, germination, and hard seed

(e) Percent of maximum weed seed content

(f) Seed Origin

(g) Noxious weeds present

(h) Other crop seed

(i) Inert matter

(j) Name and address of seed distributor

(k) Mixture percent of each component

Inoculate legume seed with approved cultures according to the manufacturer's instructions.

Company: ____________________________

TIN: ____________________________

DUNS: ____________________________

Phone: ____________________________

E-mail: ____________________________

REQUIREMENTS: OFFERORS MUST BE REGISTERED IN SAM AND RESPOND TO

ALL CRITERIA INCLUDED IN SECTION L. OFFERORS WHO FAIL TO MEET THESE

REQUIREMENTS WILL NOT BE CONSIDERED FOR AWARD.

SECTION C - Statement of Work

C.1 Scope of Contract

This project is primarily to perform required maintenance for designated Forest Service System roads on the Grand Valley and Paonia Ranger Districts of the Grand Mesa National Forest in Mesa, Delta, and

Gunnison Counties, Colorado. The Forest Service intends to award from one to three Indefinite Delivery -

Indefinite Quantity (IDIQ) contracts for the performance of these services based on the best interests of the

Government.

Individual task orders issued under the proposed contract may include line items of construction or reconstruction such as replacement of pipe culverts or installation of surface drainage features in addition to required road maintenance.

C.2 Description of Work

The project includes, but is not limited to, the following: road maintenance, clearing and grubbing; culvert installation and repair; sign installation and repair; erosion control; gate and fencing installation and repair;

cattleguard installation and repair; material haul; haul and placement of imported borrow or aggregate; and other related road work as may be further described in the Statement of Work for each Task Order.

C.3 Location of Project

The project areas are the Grand Valley District of the Grand Mesa National Forest and Paonia Ranger

District of the Grand Valley and Gunnison National Forests.

C.4 Performance of the Work

All work shall be conducted in a safe and expedient manner and in conformance with the specifications referenced in Section J and the Task Order. Safety / OSHA compliance shall be shall be a priority. When applicable, traffic control shall be in accordance with standards set forth in the most current edition of the

Manual on Uniform Traffic Control Devices (MUTCD). All work shall be conducted by personnel fully qualified to perform the tasks assigned, and shall be supervised by a designated Contractor’s

Representative.

C.5 Equipment

All equipment shall be in good repair, and capable of accomplishing assigned tasks in a safe and environmentally acceptable manner. Where applicable, all equipment shall be fitted with approved spark arrestors.

All equipment shall be cleaned of earthen and vegetative materials that may contain weed seed prior to delivery onto National Forest Lands. Mobilization of equipment shall not occur prior to inspection unless an exception is granted by the Contracting Officer.

C.6 Equipment and Materials Storage & Staging

Upon concurrence from the Contracting Officer’s Representative, certain areas on the Grand Mesa and

Gunnison National Forests may be used on a case-by-case basis for storage of equipment and/or materials during active maintenance periods. The Contractor shall be responsible for protection of items stored on

Government property, and shall ensure adequate safety measures are maintained at such sites.

All repairs to equipment under this contract shall be made and paid for by the Contractor. Camping is permitted on National Forest Lands and within Campgrounds, extension permissions may be granted by the

Contracting Officer and proper permits may be obtained at the Grand Valley and Paonia Ranger Districts.

C.7 Routine Road Maintenance- Gravel and Native Surfaced Roads

When the task order calls for routine blading (road grading) of forest roads, equipment operators with no previous national forest road maintenance experience shall view a short (18-minute) video on proper road maintenance techniques prior to beginning work. The operator shall work in a manner that closely follows the techniques shown in the video.

C.8 Commercial Materials

Commercial provided materials, such as aggregate, imported borrow, or gates, shall be paid for separately under each Task Order.

C.9 Government-Furnished Materials

Unless otherwise agreed upon, any construction materials incorporated into the work shall be furnished and delivered to or near the project site(s) by the Government.

C.10 Specifications

The following “Standard Road Maintenance T Specifications”, U.S. Customary Units, is applicable for this parent contract, is included and are numbered in the “800” series code. The requirements contained in these standard specifications are hereby made part of this contract and any resulting work. Only those sections which are applicable to this contract are included. There will be gaps between section numbers due to the fact that many sections have been purposely omitted.

TASK ORDERS: The Contracting Officer will submit an executed task order to the Contractor. All work will be ordered by Firm-Fixed price TASK ORDERS (TO) at the prices listed on the Schedule of

Items. The price may change only by a written modification to the task order signed by the Contracting

Officer and the Contractor. The Contractor shall schedule work to minimize impact on public road use when possible.

452.211-72 Statement of Work/Specifications. (FEB 1988)

The Contractor shall furnish the necessary personnel, material, equipment, services and facilities (except as otherwise specified), to perform the Statement of Work/Specifications referenced in Section J.

(End of Clause)

452.211-73 Attachments to Statements of Work/Specifications. (FEB 1988)

The attachments to the Statement of Work/Specifications listed in Section J are hereby made part of this solicitation and any resultant contract.

SECTION D - Packaging and Marking

{There are no clauses for this Section.}

SECTION E - Inspection and Acceptance

52.246-1 Contractor Inspection Requirements. (APR 1984)

The Contractor is responsible for performing or having performed all inspections and tests necessary to substantiate that the supplies or services furnished under this contract conform to contract requirements, including any applicable technical requirements for specified manufacturers' parts. This clause takes precedence over any Government inspection and testing required in the contract's specifications, except for specialized inspections or tests specified to be performed solely by the Government.

(End of clause)

52.246-4 Inspection of Services - Fixed-Price. (AUG 1996)

(a) Definition: "Services," as used in this clause, includes services performed, workmanship, and material furnished or utilized in the performance of services.

(b) The Contractor shall provide and maintain an inspection system acceptable to the Government covering the services under this contract. Complete records of all inspection work performed by the Contractor shall be maintained and made available to the Government during contract performance and for as long afterwards as the contract requires.

(c) The Government has the right to inspect and test all services called for by the contract, to the extent practicable at all times and places during the term of the contract. The Government shall perform inspections and tests in a manner that will not unduly delay the work.

(d) If the Government performs inspections or tests on the premises of the Contractor or a subcontractor, the Contractor shall furnish, and shall require subcontractors to furnish, at no increase in contract price, all reasonable facilities and assistance for the safe and convenient performance of these duties.

(e) If any of the services do not conform with contract requirements, the Government may require the Contractor to perform the services again in conformity with contract requirements, at no increase in contract amount. When the defects in services cannot be corrected by reperformance, the Government may -

(1) Require the Contractor to take necessary action to ensure that future performance conforms to contract requirements; and

(2) Reduce the contract price to reflect the reduced value of the services performed.

(f) If the Contractor fails to promptly perform the services again or to take the necessary action to ensure future performance in conformity with contract requirements, the Government may -

(1) By contract or otherwise, perform the services and charge to the Contractor any cost incurred by the Government that is directly related to the performance of such service; or

(2) Terminate the contract for default.

52.246-12 Inspection of Construction. (APR 1996)

(a) Definition. "Work" includes, but is not limited to, materials, workmanship, and manufacture and fabrication of components.

(b) The Contractor shall maintain an adequate inspection system and perform such inspections as will ensure that the work performed under the contract conforms to contract requirements. The

Contractor shall maintain complete inspection records and make them available to the

Government. All work shall be conducted under the general direction of the Contracting Officer and is subject to Government inspection and test at all places and at all reasonable times before acceptance to ensure strict compliance with the terms of the contract.

(c) Government inspections and tests are for the sole benefit of the Government and do not -

(1) Relieve the Contractor of responsibility for providing adequate quality control measures;

(2) Relieve the Contractor of responsibility for damage to or loss of the material before acceptance;

(3) Constitute or imply acceptance; or

(4) Affect the continuing rights of the Government after acceptance of the completed work under paragraph (i) of this section.

(d) The presence or absence of a Government inspector does not relieve the Contractor from any contract requirement, nor is the inspector authorized to change any term or condition of the specification without the Contracting Officer's written authorization.

(e) The Contractor shall promptly furnish, at no increase in contract price, all facilities, labor, and material reasonably needed for performing such safe and convenient inspections and tests as may be required by the Contracting Officer. The Government may charge to the Contractor any additional cost of inspection or test when work is not ready at the time specified by the Contractor for inspection or test, or when prior rejection makes reinspection or retest necessary. The

Government shall perform all inspections and tests in a manner that will not unnecessarily delay the work. Special, full size, and performance tests shall be performed as described in the contract.

(f) The Contractor shall, without charge, replace or correct work found by the Government not to conform to contract requirements, unless in the public interest the Government consents to accept the work with an appropriate adjustment in contract price. The Contractor shall promptly segregate and remove rejected material from the premises.

(g) If the Contractor does not promptly replace or correct rejected work, the Government may -

(1) By contract or otherwise, replace or correct the work and charge the cost to the

Contractor; or

(2) Terminate for default the Contractor's right to proceed.

(h) If, before acceptance of the entire work, the Government decides to examine already completed work by removing it or tearing it out, the Contractor, on request, shall promptly furnish all necessary facilities, labor, and material. If the work is found to be defective or nonconforming in any material respect due to the fault of the Contractor or its subcontractors, the Contractor shall defray the expenses of the examination and of satisfactory reconstruction. However, if the work is found to meet contract requirements, the Contracting Officer shall make an equitable adjustment for the additional services involved in the examination and reconstruction, including, if completion of the work was thereby delayed, an extension of time.

(i) Unless otherwise specified in the contract, the Government shall accept, as promptly as practicable after completion and inspection, all work required by the contract or that portion of the work the Contracting Officer determines can be accepted separately. Acceptance shall be final and conclusive except for latent defects, fraud, gross mistakes amounting to fraud, or the

Government's rights under any warranty or guarantee.

SECTION F - Deliveries or Performance

52.211-10 Commencement, Prosecution, and Completion of Work. (APR 1984)

The Contractor shall be required to (a) commence work under this contract within ten calendar days after the date the Contractor receives the notice to proceed, (b) prosecute the work diligently, and (c) complete the entire work ready for use not later than the date specified in each individual task order.