Additional Data Document B.pdf
PDF 122 KB Posted
- Attached to
- COVERALLS
- Solicitation number
- SPMYM226Q7948
About this file
This is a product specification document for medium green one-piece coveralls (NIIN: LLS050137, Document Number: 61917905). The coveralls must be constructed from a 65% polyester and 35% cotton blend, weighing 5.5 to 8 ounces preshrunk cotton, with a commercial-practice two-up, one-down twill weave. All seams shall be double seams completely finished, and the garment must be free of loose materials visible to the unaided eye including strings, fibers, lint, and fluff.
The coveralls feature a full collar measuring 4-1/2 inches plus or minus 1/2 inch wide, a single front pocket on the left chest, and no other pockets or through holes. Velcro or equivalent hook-and-pile fastener tape is required on the front, pant cuffs, sleeve cuffs, and pocket top. Pant leg openings must be finished with elastic stirrups attached via reinforcing box-stitch. Size specifications span Medium through XXX-Large, with chest measurements ranging from 46 to 64 inches (±1 inch tolerance), leg inseams from 30 to 36 inches (±1/2 inch tolerance), and sleeve inseams from 20 to 24 inches (±1/2 inch tolerance). All coveralls must be preshrunk prior to government receipt and permanently labeled with the manufacturer's name and identifying number. The contractor shall submit a certificate of compliance with each shipment confirming preshrinking compliance per Item 13 Special Instructions.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - SPMYM226Q7948.pdf | ||
| Additional Data Document.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ADDED DATA
DOCUMENT NUMBER : 61917905 NIIN: LLS050137
1. Style: 1 piece outfit
2. Color: Medium green
3. Material Blend: 65% Polyester and 35% Cotton.
4. Material Weight: 5.5 to 8 ounce preshrunk cotton.
5. Material Weave: Commercial practice similar to two up, one down, right or left twill.
6. Finish: All seams shall be double seams and completely finished.
7. Fasteners: “Velcro” or equal (Hook and pile fastener tape) are required for the following areas:
a. The front of the coveralls.
B. Sealing the pant cuffs
c. Sealing the sleeve cuffs
d. Sealing the top of the pocket
8. Collar: A full collar, 4-1/2 inches plus or minus ½ inch wide.
9. Pocket: A Front pocket on left chest, standard size.
NOTE: No other pockets or through holes
10. Foot stirrup: The pant leg openings shall be finished off with an elastic stirrup. The stirrup shall be attached to each leg opening with a reinforcing box-stitch.
11. Size Dimensions: All dimensions and tolerances are expressed in inches.
Size Med LRG X-LRG XX-LRG XXX-LRG TOLERANCE
Chest (a) 46 50 54 60 64 +/- 1
Leg Inseam (b) 30 30 32 32 36 +/- ½
Sleeve Inseam (c) 20 20 20 20 24 +/- 1/2
NOTE: The above measurements shall be taken with the coverall laid out smooth and flat and the neck fully extended.
(a) Chest: Twice the measurement taken across the front at the base of the armholes, from folded edge to folded edge.
(b) Leg Inseam: Measurement shall be taken from the junction of the seams (crotch) along the inseam to the bottom of the coverall.
(c) Sleeve Inseam: Measurement shall be taken from the base of the armhole along the inseam to the bottom edge of the seam.
12. Workmanship: The coveralls shall be free of any loose material such as strings, fibers, unraveling materials, lint, fluff from cloth, or any other particles of size visible to the unaided eye.
13. Special instructions: All coveralls shall be preshrunk prior to receipt by the government.
14. Markings: Coveralls shall be labeled in permanent and visible manner with the manufacturer’s name and identifying number.
15. Responsibility for Compliance: The contractor shall meet all the requirements of the referenced document unless otherwise excluded, amended, modified, or qualified in this document or applicable purchase document shall be meet. A certificate of compliance shall be submitted for the following requirement with each shipment:
i. Item (13) Special Instructions
File details come from the government source that posted it. Updated .