Addenum Two .pdf

PDF 3 MB Posted Dec 6, 2024

Attached to: RFB-129-25 EDU FFA Camp HVAC Replacement
Solicitation number: RFB-785-2500000269-4
Issued by: Breathitt County, Kentucky

About this file

Written by GovTribe AI · Dec 14, 2024

This is Addendum Two issued by the Commonwealth of Kentucky Department for Facilities and Support Services Division of Engineering and Contract Administration for HVAC Replacement at the FFA Leadership Center Recreation Hall in Hardinsburg, Kentucky (RFB-129-25). The addendum moves the official bid date to December 12, 2024 at 1:30 P.M. Eastern Time and references additional technical amendments to be distributed by Lynn Imaging for changes to specifications and drawings.

The files also contain detailed mechanical, electrical, and engineering drawings showing HVAC system layouts, electrical distribution plans, and control sequences for various building systems including water-to-water heat pumps, fan coils, unit ventilators, and lighting fixtures. The drawings provide extensive technical specifications for equipment performance requirements, control system integration details, and installation requirements that bidders must follow.

View the file

Other files

File	Type	Posted
Addendum Three.pdf	PDF	Dec 6, 2024
Final_RFB_785_2500000269_4_SO_FORM.PDF	PDF	Dec 6, 2024
Final_RFB_785_2500000269_1_SO_FORM.PDF	PDF	Dec 6, 2024
Final_RFB_785_2500000269_2_SO_FORM.PDF	PDF	Dec 6, 2024
Addendum One .pdf	PDF	Dec 6, 2024
Final_RFB_785_2500000269_3_SO_FORM.PDF	PDF	Dec 6, 2024

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

COMMONWEALTH OF KENTUCKY

DEPARTMENT FOR FACILITIES AND SUPPORT SERVICES

DIVISION OF ENGINEERING AND CONTRACT ADMINISTRATION

INVITATION TO BID NO: RFB-129-25

FOR: HVAC Replacement FFA Leadership Center Recreation Hall Kentucky Department of Education Hardinsburg, Kentucky

DATE: December 5, 2024

RFB-785-2500000269

ADDENDUM NO. Two (2)

BIDDER SHALL CONFORM TO THE FOLLOWING CHANGES AS SAME SHALL BECOME BINDING

UPON THE CONTRACT TO BE ISSUED IN RESPONSE TO THIS INVITATION TO BID.

Item 1: Refer to addendum to be distributed by Lynn Imaging for all additions, deletions, and/or changes to specifications and/or drawings.

Item 2: Official Bid Date has been moved to December 12, 2024 @ 1:30 P.M. Eastern Time

END OF ADDENDUM

Invitation to Bid No. RFB-129-25 For: HVAC Replacement FFA Leadership Center Recreation Hall Kentucky Department of Education Hardinsburg, Kentucky

Susan Ward, Statewide Procurement Analyst II Division of Engineering and Contract Administration s t u d i o k r e m e r a r c h i t e c t s

1231 S Shelby St, Louisville, KY 40203

TEL 502.499.1100 FAX 502.499.1101

A D D E N D U M N O . 1

TO: All Plan Holders

FROM: Studio Kremer Architects

PROJECT: Kentucky School for the Blind

SCOGGAN & MCDANIEL HVAC REVISIONS

ska# 2023-33.3-4

This Addendum No. 1 supersedes and supplements all portions of the Construction Documents with which it conflicts.

Acknowledgement of this Addendum shall be noted on the Form of Proposal.

Addendum No. 1 makes the following modifications and clarifications to the Construction Drawings and Specifications:

Item No. 1:

For bidders’ better understanding of existing conditions, the following link provides access to archival drawings from the original construction and previous projects: https://drive.google.com/drive/folders/1ATUyd- 4CjYcCUwAgLBYnJrcMLBuf_Sbk?usp=sharing

Item No. 2:

The attached documents and drawing revisions provided by CMTA describe all changes, corrections, clarifications and updates to the Mechanical, Electrical, Plumbing, and Systems scopes of work and become part of this Addendum.

CHANGES TO DRAWINGS:

Mechanical

Sheet # Sheet Title Noted Update

M-402 Mechanical Enlarged Plans 1. Updated Water to Water Heat Pump Layout in

Mechanical Room

M-601 Mechanical Schedules 1. Whalen is an acceptable fan coil manufacturer.

2. Magic Aire is an acceptable unit ventilator manufacturer.

3. Updated performance data for water-to-water heat pump.

M-701 Mechanical Controls 1. Updated verbiage for campus control requirement and integration.

2. Added Johnson Controls and Ameresco as acceptable manufacturers.

Addendum No 2 – page 2 s t u d i o k r e m e r a r c h i t e c t s m-702 Mechanical Controls 1. Updated points list for unit ventilators

Electrical

E-300 GROUND FLOOR LIGHTING PLAN

E-301 FIRST FLOOR LIGHTING PLAN

E-302 SECOND FLOOR LIGHTING PLAN

E-400 GROUND FLOOR POWER/SYSTEMS

PLAN

E-401 FIRST FLOOR POWER/SYSTEMS PLAN

E-402 SECOND FLOOR POWER/SYSTEMS PLAN

E-501 ELECTRICAL POWER RISER DIAGRAM

E-601 PANELBOARD SCHEDULES

E-801 ELECTRICAL DETAILS

CHANGES TO SPECIFICATIONS:

• 283200 – Addressable Fire Alarm System o Omit paragraph 1.2, B.

o Contractor shall provide all required equipment, devices, cabling and raceways for a fully functional system.

ATTACHMENT(S):

• Mechanical Drawings as listed above

• Electrical Drawings as listed above

END OF ADDENDUM NO. 1

(referenced attachments follow)

Kentucky School For The Blind – Scoggan and McDaniel

Renovation Project Number 540CBANFF2500

Addendum #1

December 04, 2024

Kentucky School For The Blind – Scoggan and McDaniel Renovation Project

Addendum #2

CHANGES TO DRAWINGS:

Mechanical

M-402 Mechanical Enlarged Plans 1. Updated Water to Water Heat Pump Layout in

Mechanical Room.

M-601 Mechanical Schedules 1. Whalen is an acceptable fan coil manufacturer.

2. Magic Aire is an acceptable unit ventilator manufacturer.

3. Updated performance data for water-to-water heat pump.

M-701 Mechanical Controls 1. Updated verbiage for campus control requirement and integration.

2. Added Johnson Controls and Ameresco as acceptable manufacturers.

M-701 Mechanical Controls 1. Updated points list for unit ventilators.

Electrical

E-300 GROUND FLOOR LIGHTING PLAN 1. Added exit signs, switch control, occupancy sensors, and emergency wall packs.

2. Removed switches and occupancy senors.

E-301 FIRST FLOOR LIGHTING PLAN 1. Added exit signs, switch control, occupancy sensors, and emergency wall packs.

2. Removed switches and occupancy senors.

E-302 SECOND FLOOR LIGHTING PLAN 1. Added exit signs, switch control, occupancy sensors, and emergency wall packs.

2. Removed switches and occupancy senors.

E-400 GROUND FLOOR POWER/SYSTEMS PLAN 1. Added fire alarm devices and note clarification.

E-401 FIRST FLOOR POWER/SYSTEMS PLAN 1. Added fire alarm devices.

E-402 SECOND FLOOR POWER/SYSTEMS PLAN 1. Added fire alarm devices.

E-501 ELECTRICAL POWER RISER DIAGRAM 1. Added grounding notes and feeder notes.

2. Made an 800A/3P breaker in MDP a 100% rated breaker.

E-601 PANELBOARD SCHEDULES 1. Added clarification for existing panel D1D and which breakers are to be new and which are to remain.

E-801 ELECTRICAL DETAILS 1. Updated light fixture schedule.

2. Updated lighting control detail.

UE-100 SITE UTILITY PLAN - ELECTRICAL 1. Added tag notes and scope clarification.

CHANGES TO SPECIFICATIONS:

• 283200 – Addressable Fire Alarm System o Omit paragraph 1.2, B.

o Contractor shall provide all required equipment, devices, cabling and raceways for a fully functional system.

ATTACHMENT(S):

• Mechanical Drawings as listed above

• Electrical Drawings as listed above

END OF ADDENDUM #1

OS OS OS OS

CLASSROOM

STAIR

LEARNING LAB

CLASSROOM

O & M

CLASSROOM

GIRLS TOILET

BOYS TOILET

ELEV. MACH. ROOM

118B

CUST.

118A

PYSCHOLOGY OFFICE

TOILET

HOME EC. KITCHEN/ DINING

BATHROOM

TOILET

ELEC. RM.

HOME EC. LAUNDRY

CLASSROOM

STAIR

STORAGE

TESTING

AUDIOLOGY

SPEECH OFFICE

THERAPY

CORRIDOR

O & M

CLASSROOM

MECHANICAL RM

BOOTH

STOR.

JAN.

PASSAGEWAY

STAIRS A

STORAGE

152 TOILET

CRAFT ROOM

148STORAGE RM

GIRLS

BOYS

FINISH'G ROOM

INDUSTRIAL ARTS SHOPS

ENTRY

OFFICE

IT ROOM

OFFICE

CLASSROOM

STORAGE

STAIR

COMPUTER CLASSROOM

CORRIDOR

STORAGE

CORRDIOR

STORAGE

KILN ROOM

140A

.LV2

A1 A1

A1 A1 A1

A1A1A1

.LV2

A1 A1

A1 A1 A1

A1A1

.LV2

A1A1

.LV1

.LV2

.LV1

.LV2

.LV1

.LV2

A1 A1 A1

.LV2

B1 B1

.OS

D1 D1 H1

H1 H1 H1

H1H1

D1D1

L8 L8

L8L8

D1L1

.OS

D1D

(EXISTING

PANEL)

D1 D1

D1 L1

A1 A1

A1A1

A1 A1

1-AA

D1-AA

A1S

1-AA-3

A1S

A1S A1S A1S A1S A1S A1S

1B-83

A1A1

H1 H1 H1

A1 A1A1

A1 A1

A1 A1 A1

A1A1

A1 A1

OFFICE

143B

1B-81

1B-82

1A-39

L8 L8

L8 L8 L8 L8 L8

L8 L8 L8 L8

A1S

A1S A1S

B1S

B1S aa b b b b a bb b bb a a b b b b b a a b b bbb b bb

.LV2

a aa b bb a a b b b b b

.LV2

a a a b

1B-84

A1 A1

A1 b bb b b a a b b b b a b

A1 b

A1 a

.LV2

.LV1

A1S

A1SA1S

A1S

H1 H1 H1

H1H1H1

.LV1

1-AA-2

A1 A1 A1

A1A1A1 a

A1 a

E1 b b a

E1 E1

L1 L1

.OS

.K .K

1 1

.LV2

.LV1

L2 1

E 1

E1 E1

E1 E1 E1

E11 E1 E1

X1 X1

X1X2

REVISION HISTORY OF THIS DRAWING

DECA LOG #

ENGR. FILE NO.

DRAWING NO.

DRAWN BY

AS BUILT DATE

COMMONWEALTH OF KENTUCKY

FINANCE AND ADMINISTRATION CABINET

DEPARTMENT FOR FACILITIES AND SUPPORT SERVICES

DIVISION OF ENGINEERING AND CONTRACT ADMINISTRATION

FRANKFORT, KENTUCKY

DESCRIPTION OF REVISIONS DATE DESCRIPTION OF REVISIONS DATE

CHECKED BY

PHASE

RTA DATE

DRAWING DATE

A & E FILE NO.

DRAWING INFORMATION

# 540-CBT2

ACCT# 540-CBT2

10411 Meeting Street Prospect, KY 40059

T: 502 326.3085 F: 502 326.2691

09.11.2024

VKYS23

/4 /2

P M

U s e rs \g w e s s lin g \D o c u m e n ts

\V K

Y S

-0

M c D a n ie l_ g w e s s lin g C

L F

H C

.r v t

P ro je c t

N u m b e r_

O w n e r_ R

T A

E -3

G R

O U

N D

F L O

O R

H T

P L A

E-300

GROUND FLOOR LIGHTING PLAN

1867 Frankfort Ave, Louisville, KY 40206

BKB

GTW

RTA

KSB SCOGGAN/MCDANIEL HVAC REVISIONS

SCALE: 1/8" = 1'-0"

GROUND FLOOR LIGHTING

GENERAL NOTES (LIGHTING):

A. REFER TO THE ARCHITECT'S REFLECTED CEILING PLANS, ELEVATIONS,

AND CASEWORK DETAILS FOR EXACT LOCATIONS OF ALL WALL AND

CEILING MOUNTED ELECTRICAL DEVICES.

B. CONTRACTOR SHALL FOLLOW BRANCH CIRCUITING LAY-OUT, AS

INDICATED ON THE FLOOR PLANS, WITH A MAXIMUM OF THREE (3)

BRANCH CIRCUITS PER HOMERUN. EACH BRANCH CIRCUIT SHALL BE

PROVIDED WITH A DEDICATED NEUTRAL CONDUCTOR. DEDICATED

NEUTRAL CONDUCTORS SHALL BE CONSIDERED CURRENT

CARRYING. IF ADDITIONAL CONDUCTORS ARE RAN IN THE SAME

CONDUIT WITH THOSE INDICATED, CONTRACTOR SHALL DERATE ALL

CURRENT CARRYING CONDUCTORS PER N.E.C. #310.15(B)(3), AND

UPSIZE CONDUIT AS REQUIRED PER N.E.C. #300.17 AND ANNEX

C. MULTIWIRE BRANCH CIRCUITS AS DEFINED IN N.E.C #100 / 210.4

(CIRCUITS SHARING A COMMON NEUTRAL CONDUCTOR) SHALL NOT BE

PERMITTED.

C. IDENTIFY THE PANEL AND CIRCUIT NUMBER FOR ALL RECEPTACLES,

SWITCHES, ETC. IN AREA OF CONSTRUCTION. PROVIDE CLEAR

ADHESIVE LABELS WITH BLACK LETTERING. IN HEALTHCARE FACILITIES,

ENGRAVE EMERGENCY DEVICE COVERPLATES IN PATIENT CARE

AREAS. ALSO, MARK INSIDES OF ALL DEVICE BOXES WITH PANEL AND

CIRCUIT NUMBER.

D. LOCATE CHAIN-HUNG INDUSTRIAL FIXTURES IN MECHANICAL ROOMS TO

AVOID DUCTWORK AND PIPING, TO MAXIMIZE AVAILABLE LIGHT. SPACE

AROUND EQUIPMENT, AIR HANDLERS, ETC. TO PROVIDE ADEQUATE

LIGHTING TO ALL AREAS OF ROOM. PROVIDE ADDITIONAL FIXTURES OF

SAME TYPE AS NEEDED TO FULFILL THIS REQUIREMENT.

E. LOCATE EXIT SIGNS FOR MAXIMUM VIEWING AREA TO IDENTIFY EGRESS

PATHS AS INDICATED ON PLANS. COORDINATE LOCATIONS SUCH THAT

ARCHITECTURAL FEATURES OR EQUIPMENT FROM OTHER TRADES DO

NOT OBSTRUCT VIEW.

F. LUMINAIRES INDICATED WITH MULTI-LEVEL SWITCHING SHALL HAVE

SIMILAR LAMPS CONTROLLED TOGETHER, I.E. INBOARD AND OUTBOARD

LAMPS OR RIGHT AND LEFT HAND LAMPS.

G. ALL LIGHTING FIXTURE LENSES, PARABOLIC LOUVERS, DOWNLIGHTING

ALZAK CONES AND "PARACUBE" LOUVERS SHALL BE HANDLED WITH

COTTON GLOVES DURING INSTALLATION AND LAMPING TO AVOID

FINGERPRINTS OR DIRT DEPOSITS. IT IS PREFERRED THAT FIXTURES

BE SHIPPED AND INSTALLED WITH CLEAR PLASTIC BAGS TO PROTECT

LOUVERS. AT CLOSE OF PROJECT, AND AFTER CONSTRUCTION AIR

FILTERS ARE CHANGED, REMOVE BAGS. ANY LOUVER OR CONE

SHOWING DIRT OR FINGER PRINTS SHALL BE CLEANED WITH SOLVENT

RECOMMENDED BY THE MANUFACTURER, OR REPLACED AS

NECESSARY IN ORDER TO TURN OVER TO THE OWNER NEW FIXTURES

AT OCCUPANCY.

H. RECESSED LUMINAIRES SHALL BE SECURED SUCH THAT THE FORCE

REQUIRED INSERTING LAMPS, TRIMS, LENSES, LOUVERS, OR DOOR

FRAMES DOES NOT SHIFT HOUSING. ALL TRIMS SHALL BE COMPLETELY

FLUSH WITH FINISHED CEILINGS AT COMPLETION OF CONSTRUCTION.

I. CONTRACTOR SHALL PROVIDE UNSWITCHED BRANCH CIRCUIT TO ALL

EXIT SIGNS, EMERGENCY INVERTER BATTERY PACKS, AND NIGHT

LIGHTS, AS REQUIRED.

KEYNOTES

L1 ROUTE EXTERIOR LIGHTING BRANCH CIRCUITS THROUGH

OUTDOOR LIGHTING CONTACTOR PANEL. REFER TO DETAIL ON

SHEET #E801 FOR REQUIREMENTS.

L2 COORDINATE TEACHING WALL SWITCH LOCATION WITH

OWNER, PRIOR TO ROUGH-IN. (TYPICAL)

gwessling Text Box

ADDENDUM 1

gwessling Text Box 12/04/24

OS OS

OSOS

OS OS OS

OS OS

OS OS OS

OSOS

CLASSROOM

MULTI-PURPOSE

STORAGE

GIRLS TOILET

BOYS TOILET

CLASSROOM

CUST.

SOCIAL WORKER

RECEPTION

SOCIAL WORKER

COUNSELOR

STAIR

CLASSROOM

KITCHENETTE

SPECIAL SERVICES

TOILET

CLOSET

204A

CLOSET

CORRIDOR

BRIDGE

STAIR

PRINCIPAL'S OFFICE

GENERAL OFFICE

TOILET

SPECIAL CLASSROOM

SPECIAL STUDENT INSTRUCTION

AREA

STAFF LOUNGE

BATH

SENSORY ROOM

CLOSET

SENSORY ROOM

KITCHEN

TOILET

STORAGE

GIRLS

249JANITOR

BOYS

TOILET

CONFERENCE RM 1

WORKROOM

STORAGE

LOBBY

SUPERVISOR

OFFICE EQUIP. AND STOCK

STORAGE

STAIR B

STAIR A

CLASSROOM

PRINCIPAL

TOILET

WORKROOM

BUISNESS OFFICE

SUPERVISOR

BOOK STORAGE

CLOSET

CONFERENCE RM 2

CORRDIOR

VESTIBULE

.LV2

A1 A1 A1

A1A1

.LV2

A1 A1

A1A1A1

A1 A1

.LV2

.LV1

.LV2

A1 A1

.LV2

.LV1

.LV2

B1 B1 B1

B1B1B1

B1 B1

B1B1

B1 B1

B1B1

.LV2

.LV2.LV2 .LV2

.LV2

A1 A1E

A1A1E

.LV2

.OS

S1 S1 S1

.OS

A1S

.OS

D1 D1

L1 D1

D1 D1

A1 A1

2-AA

2-AA-2

2B-1

.LV2

A1S

2-AA-4

A1S

A1S A1S A1S A1S A1S

A1S

A1A1

A1 A1

A1A1

A1A1A1

A1 A1K

2B-2

A1A1

2B-4

B1S B1S B1S B1S

B1S

B1S B1S

B1SB1SB1SB1S

B1S

2A a b b a b b b a a b b a a a b b b

.LV2

a a a b b b

.LV2

W b b a b b b aa

2A-4

K1 K1

.LV2

.LV1

K1K1

A1S

K1 K1

A1 A1

A1A1 A1

A1A1A1 a a a b b b b b aa b bb b b b b

2-AA-1

a a a b b b b b

A1A1

A1 A1

A1A1 A1

A1A1

A1 A1

A1A1 a b

A1 vs

.OS

.OS .OS

.OS

L2 1

E 11

E11

E1 E1 1 1

E1 E1

1 1

E1 E1

1 1

E1E1

X21

X1 X1X1

.LV2

.LV1

LV1

REVISION HISTORY OF THIS DRAWING

DECA LOG #

ENGR. FILE NO.

DRAWING NO.

DRAWN BY

AS BUILT DATE

COMMONWEALTH OF KENTUCKY

FINANCE AND ADMINISTRATION CABINET

DEPARTMENT FOR FACILITIES AND SUPPORT SERVICES

DIVISION OF ENGINEERING AND CONTRACT ADMINISTRATION

FRANKFORT, KENTUCKY

DESCRIPTION OF REVISIONS DATE DESCRIPTION OF REVISIONS DATE

CHECKED BY

PHASE

RTA DATE

DRAWING DATE

A & E FILE NO.

DRAWING INFORMATION

# 540-CBT2

ACCT# 540-CBT2

10411 Meeting Street Prospect, KY 40059

T: 502 326.3085 F: 502 326.2691

09.11.2024

VKYS23

/4 /2

P M

U s e rs \g w e s s lin g \D o c u m e n ts

\V K

Y S

-0

M c D a n ie l_ g w e s s lin g C

L F

H C

.r v t

P ro je c t

N u m b e r_

O w n e r_ R

T A

E -3

S E

C O

N D

F L

O O

R L

G P

L A

E-301

SECOND FLOOR LIGHTING PLAN

1867 Frankfort Ave, Louisville, KY 40206

BKB

GTW

RTA

KSB SCOGGAN/MCDANIEL HVAC REVISIONS

SCALE: 1/8" = 1'-0"

SECOND FLOOR LIGHTING

GENERAL NOTES (LIGHTING):

A. REFER TO THE ARCHITECT'S REFLECTED CEILING PLANS, ELEVATIONS,

AND CASEWORK DETAILS FOR EXACT LOCATIONS OF ALL WALL AND

CEILING MOUNTED ELECTRICAL DEVICES.

B. CONTRACTOR SHALL FOLLOW BRANCH CIRCUITING LAY-OUT, AS

INDICATED ON THE FLOOR PLANS, WITH A MAXIMUM OF THREE (3)

BRANCH CIRCUITS PER HOMERUN. EACH BRANCH CIRCUIT SHALL BE

PROVIDED WITH A DEDICATED NEUTRAL CONDUCTOR. DEDICATED

NEUTRAL CONDUCTORS SHALL BE CONSIDERED CURRENT

CARRYING. IF ADDITIONAL CONDUCTORS ARE RAN IN THE SAME

CONDUIT WITH THOSE INDICATED, CONTRACTOR SHALL DERATE ALL

CURRENT CARRYING CONDUCTORS PER N.E.C. #310.15(B)(3), AND

UPSIZE CONDUIT AS REQUIRED PER N.E.C. #300.17 AND ANNEX

C. MULTIWIRE BRANCH CIRCUITS AS DEFINED IN N.E.C #100 / 210.4

(CIRCUITS SHARING A COMMON NEUTRAL CONDUCTOR) SHALL NOT BE

PERMITTED.

C. IDENTIFY THE PANEL AND CIRCUIT NUMBER FOR ALL RECEPTACLES,

SWITCHES, ETC. IN AREA OF CONSTRUCTION. PROVIDE CLEAR

ADHESIVE LABELS WITH BLACK LETTERING. IN HEALTHCARE FACILITIES,

ENGRAVE EMERGENCY DEVICE COVERPLATES IN PATIENT CARE

AREAS. ALSO, MARK INSIDES OF ALL DEVICE BOXES WITH PANEL AND

CIRCUIT NUMBER.

D. LOCATE CHAIN-HUNG INDUSTRIAL FIXTURES IN MECHANICAL ROOMS TO

AVOID DUCTWORK AND PIPING, TO MAXIMIZE AVAILABLE LIGHT. SPACE

AROUND EQUIPMENT, AIR HANDLERS, ETC. TO PROVIDE ADEQUATE

LIGHTING TO ALL AREAS OF ROOM. PROVIDE ADDITIONAL FIXTURES OF

SAME TYPE AS NEEDED TO FULFILL THIS REQUIREMENT.

E. LOCATE EXIT SIGNS FOR MAXIMUM VIEWING AREA TO IDENTIFY EGRESS

PATHS AS INDICATED ON PLANS. COORDINATE LOCATIONS SUCH THAT

ARCHITECTURAL FEATURES OR EQUIPMENT FROM OTHER TRADES DO

NOT OBSTRUCT VIEW.

F. LUMINAIRES INDICATED WITH MULTI-LEVEL SWITCHING SHALL HAVE

SIMILAR LAMPS CONTROLLED TOGETHER, I.E. INBOARD AND OUTBOARD

LAMPS OR RIGHT AND LEFT HAND LAMPS.

G. ALL LIGHTING FIXTURE LENSES, PARABOLIC LOUVERS, DOWNLIGHTING

ALZAK CONES AND "PARACUBE" LOUVERS SHALL BE HANDLED WITH

COTTON GLOVES DURING INSTALLATION AND LAMPING TO AVOID

FINGERPRINTS OR DIRT DEPOSITS. IT IS PREFERRED THAT FIXTURES

BE SHIPPED AND INSTALLED WITH CLEAR PLASTIC BAGS TO PROTECT

LOUVERS. AT CLOSE OF PROJECT, AND AFTER CONSTRUCTION AIR

FILTERS ARE CHANGED, REMOVE BAGS. ANY LOUVER OR CONE

SHOWING DIRT OR FINGER PRINTS SHALL BE CLEANED WITH SOLVENT

RECOMMENDED BY THE MANUFACTURER, OR REPLACED AS

NECESSARY IN ORDER TO TURN OVER TO THE OWNER NEW FIXTURES

AT OCCUPANCY.

H. RECESSED LUMINAIRES SHALL BE SECURED SUCH THAT THE FORCE

REQUIRED INSERTING LAMPS, TRIMS, LENSES, LOUVERS, OR DOOR

FRAMES DOES NOT SHIFT HOUSING. ALL TRIMS SHALL BE COMPLETELY

FLUSH WITH FINISHED CEILINGS AT COMPLETION OF CONSTRUCTION.

I. CONTRACTOR SHALL PROVIDE UNSWITCHED BRANCH CIRCUIT TO ALL

EXIT SIGNS, EMERGENCY INVERTER BATTERY PACKS, AND NIGHT

LIGHTS, AS REQUIRED.

KEYNOTES

L1 ROUTE EXTERIOR LIGHTING BRANCH CIRCUITS THROUGH

OUTDOOR LIGHTING CONTACTOR PANEL. REFER TO DETAIL ON

SHEET #E801 FOR REQUIREMENTS.

L2 COORDINATE TEACHING WALL SWITCH LOCATION WITH

OWNER, PRIOR TO ROUGH-IN. (TYPICAL)

gwessling Text Box

ADDENDUM 1

gwessling

OSOS

OS OSOS OS

OS OS OS

STAIR

MECHANICAL

CHECK-OUT

LIBRARY

STAIR

A.V. ROOM

WORKROOM

CUST.

BOYS TOILET

GIRLS TOILET

VESTIBULE

BRIDGE

CLASSROOM

STAIR

STORAGE

CLASSROOM

STORAGE

OFFICE

BREAKROOM

CLASSROOM

CHEMICAL STORAGE RM

LABORATORY

STORAGE

BOYS

GIRLS

JAN.

OFFICE

LABORATORY

CLASSROOM

STAIRS

STORAGE

PHYSICAL THERAPY

CORRIDOR

L8 L8 L8 L8

.LV2

D1 D1 D1 D1

D1 D1

L8 L8

L8 L8 L8 L8

L8 L8

L8L8

L8 L8

D1 D1 D1

D1 D1 D1 D1

D1 D1

L8L8L8

L4L6

H1 D1 D1

D1 D1

L1 D1

A1 A1 A1 A1

A1A1A1A1

A1A1

A1S

A1S A1S A1S A1S A1S

A1S

3B-10

A1A1 A1

A1A1

A1S A1 A1 A1 A1 A1 A1 A1 A1

A1A1A1A1A1A1A1A1A1

A1 A1 A1 A1 A1 A1 A1 A1 A1

A1 A1 A1

3B-9

A1A1A1

A1 A1

A1 A1A1

A1 A1 H1

H1 H1 H1 H1 H1

3B-12

3B-11H1

3-AA

3-AA-2

A1A1

3-AA-3

3-AA-1

3A b a a

.LV2

a a bbb

.LV2

aa a bbb

.LV2

b b a a b

.LV2

b a a b

.LV2

b b a a b

.LV2

a a b b b

.LV2

a b b b

.LV2

.LV2 .LV2

a b a b aa b b b b b b b a a a a a a a a a a a a a a a b b b b b b b b b bb b

K1K1

.LV2

K1 K1

K1K1

A1S

A1S A1S

A1S

A1S a a b

E1 E1

3-AA-4

.OS

.VS

.VS .VS .VS .VS

L2 1

1 1 1 1

L2 1

.VS

E1 E11 1

E1 E1

1 1 1

X1 X1

X2 X2

X3 X3

.K .K

.LV1

MASTER CONTROL

SWITCH FOR ALL

LIBRARY FIXTURES

LV1

.K1

REVISION HISTORY OF THIS DRAWING

DECA LOG #

ENGR. FILE NO.

DRAWING NO.

DRAWN BY

AS BUILT DATE

COMMONWEALTH OF KENTUCKY

FINANCE AND ADMINISTRATION CABINET

DEPARTMENT FOR FACILITIES AND SUPPORT SERVICES

DIVISION OF ENGINEERING AND CONTRACT ADMINISTRATION

FRANKFORT, KENTUCKY

DESCRIPTION OF REVISIONS DATE DESCRIPTION OF REVISIONS DATE

CHECKED BY

PHASE

RTA DATE

DRAWING DATE

A & E FILE NO.

DRAWING INFORMATION

# 540-CBT2

ACCT# 540-CBT2

10411 Meeting Street Prospect, KY 40059

T: 502 326.3085 F: 502 326.2691

09.11.2024

VKYS23

/4 /2

P M

U s e rs \g w e s s lin g \D o c u m e n ts

\V K

Y S

-0

M c D a n ie l_ g w e s s lin g C

L F

H C

.r v t

P ro je c t

N u m b e r_

O w n e r_ R

T A

E -3

T H

F L O

O R

H T

P L A

E-302

THIRD FLOOR LIGHTING PLAN

1867 Frankfort Ave, Louisville, KY 40206

BKB

GTW

RTA

KSB SCOGGAN/MCDANIEL HVAC REVISIONS

SCALE: 1/8" = 1'-0"

THIRD FLOOR LIGHTING

GENERAL NOTES (LIGHTING):

A. REFER TO THE ARCHITECT'S REFLECTED CEILING PLANS, ELEVATIONS,

AND CASEWORK DETAILS FOR EXACT LOCATIONS OF ALL WALL AND

CEILING MOUNTED ELECTRICAL DEVICES.

B. CONTRACTOR SHALL FOLLOW BRANCH CIRCUITING LAY-OUT, AS

INDICATED ON THE FLOOR PLANS, WITH A MAXIMUM OF THREE (3)

BRANCH CIRCUITS PER HOMERUN. EACH BRANCH CIRCUIT SHALL BE

PROVIDED WITH A DEDICATED NEUTRAL CONDUCTOR. DEDICATED

NEUTRAL CONDUCTORS SHALL BE CONSIDERED CURRENT

CARRYING. IF ADDITIONAL CONDUCTORS ARE RAN IN THE SAME

CONDUIT WITH THOSE INDICATED, CONTRACTOR SHALL DERATE ALL

CURRENT CARRYING CONDUCTORS PER N.E.C. #310.15(B)(3), AND

UPSIZE CONDUIT AS REQUIRED PER N.E.C. #300.17 AND ANNEX

C. MULTIWIRE BRANCH CIRCUITS AS DEFINED IN N.E.C #100 / 210.4

(CIRCUITS SHARING A COMMON NEUTRAL CONDUCTOR) SHALL NOT BE

PERMITTED.

C. IDENTIFY THE PANEL AND CIRCUIT NUMBER FOR ALL RECEPTACLES,

SWITCHES, ETC. IN AREA OF CONSTRUCTION. PROVIDE CLEAR

ADHESIVE LABELS WITH BLACK LETTERING. IN HEALTHCARE FACILITIES,

ENGRAVE EMERGENCY DEVICE COVERPLATES IN PATIENT CARE

AREAS. ALSO, MARK INSIDES OF ALL DEVICE BOXES WITH PANEL AND

CIRCUIT NUMBER.

D. LOCATE CHAIN-HUNG INDUSTRIAL FIXTURES IN MECHANICAL ROOMS TO

AVOID DUCTWORK AND PIPING, TO MAXIMIZE AVAILABLE LIGHT. SPACE

AROUND EQUIPMENT, AIR HANDLERS, ETC. TO PROVIDE ADEQUATE

LIGHTING TO ALL AREAS OF ROOM. PROVIDE ADDITIONAL FIXTURES OF

SAME TYPE AS NEEDED TO FULFILL THIS REQUIREMENT.

E. LOCATE EXIT SIGNS FOR MAXIMUM VIEWING AREA TO IDENTIFY EGRESS

PATHS AS INDICATED ON PLANS. COORDINATE LOCATIONS SUCH THAT

ARCHITECTURAL FEATURES OR EQUIPMENT FROM OTHER TRADES DO

NOT OBSTRUCT VIEW.

F. LUMINAIRES INDICATED WITH MULTI-LEVEL SWITCHING SHALL HAVE

SIMILAR LAMPS CONTROLLED TOGETHER, I.E. INBOARD AND OUTBOARD

LAMPS OR RIGHT AND LEFT HAND LAMPS.

G. ALL LIGHTING FIXTURE LENSES, PARABOLIC LOUVERS, DOWNLIGHTING

ALZAK CONES AND "PARACUBE" LOUVERS SHALL BE HANDLED WITH

COTTON GLOVES DURING INSTALLATION AND LAMPING TO AVOID

FINGERPRINTS OR DIRT DEPOSITS. IT IS PREFERRED THAT FIXTURES

BE SHIPPED AND INSTALLED WITH CLEAR PLASTIC BAGS TO PROTECT

LOUVERS. AT CLOSE OF PROJECT, AND AFTER CONSTRUCTION AIR

FILTERS ARE CHANGED, REMOVE BAGS. ANY LOUVER OR CONE

SHOWING DIRT OR FINGER PRINTS SHALL BE CLEANED WITH SOLVENT

RECOMMENDED BY THE MANUFACTURER, OR REPLACED AS

NECESSARY IN ORDER TO TURN OVER TO THE OWNER NEW FIXTURES

AT OCCUPANCY.

H. RECESSED LUMINAIRES SHALL BE SECURED SUCH THAT THE FORCE

REQUIRED INSERTING LAMPS, TRIMS, LENSES, LOUVERS, OR DOOR

FRAMES DOES NOT SHIFT HOUSING. ALL TRIMS SHALL BE COMPLETELY

FLUSH WITH FINISHED CEILINGS AT COMPLETION OF CONSTRUCTION.

I. CONTRACTOR SHALL PROVIDE UNSWITCHED BRANCH CIRCUIT TO ALL

EXIT SIGNS, EMERGENCY INVERTER BATTERY PACKS, AND NIGHT

LIGHTS, AS REQUIRED.

KEYNOTES

L2 COORDINATE TEACHING WALL SWITCH LOCATION WITH

OWNER, PRIOR TO ROUGH-IN. (TYPICAL)

gwessling Text Box

ADDENDUM 1

gwessling

F F

FACP

V F

F F

F F F

SD SD

SD SD SD

SD SD

SD SD HDHD

F F

SD HD

SDHD

F F

CLASSROOM

STAIR

LEARNING LAB

CLASSROOM

110 O & M

CLASSROOM

GIRLS TOILET

BOYS TOILET

ELEV. MACH. ROOM

118B

CUST.

118A

PYSCHOLOGY OFFICE

TOILET

HOME EC. KITCHEN/ DINING

BATHROOM

TOILET

103 ELEC. RM.

HOME EC. LAUNDRY

CLASSROOM

STAIR

STORAGE

TESTING

AUDIOLOGY

SPEECH OFFICE

THERAPY

CORRIDOR

O & M

CLASSROOM

MECHANICAL RM

BOOTH

STOR.

JAN.

158PASSAGEWAY

STAIRS A

STORAGE

TOILET

CRAFT ROOM

STORAGE RM

GIRLS

BOYS

FINISH'G ROOM

INDUSTRIAL ARTS SHOPS

ENTRY

OFFICE

IT ROOM

OFFICE

CLASSROOM

STORAGE

STAIR

COMPUTER CLASSROOM

CORRIDOR

STORAGE

CORRDIOR

STORAGE

KILN ROOM

140A

MDP

D1-AA

1-AA

D1D

(EXISTING

PANEL)

MDP-9

MDP-10 MDP-12

WWHP-360

CWP-1

MDP-11

D1D (EXISTING PANEL)-20,22,24

EF-1

VFD-CWP-1

D1D (EXISTING PANEL)-13

D1D (EXISTING PANEL)-15

PROVIDE FEEDER IN

RIGID STEEL CONDUIT.

ROUTE CONDUIT IN

EXISTING TUNNEL.

OFFICE

143B

UV-1A UV-1B

1C-2 1C-4

UV-2

1C-6

HFCU-1

D1D (EXISTING PANEL)-14

1B-73

1B-74

VFCU-2

VFCU-1

PULL-BOX

PROVIDE FEEDER IN

CONCRETE ENCASED

SCH. 80 PVC. MINIMUM

BURY IS 42" BELOW

GRADE.

TIER 22 ABOVE-GRADE

PULL-BOX

1A-40

CORE DRILL BELOW GRADE

AND PROVIDE LINK SEAL

AROUND RIGID STEEL

CONDUIT

CORE DRILL BELOW GRADE

AND PROVIDE LINK SEAL

AROUND RIGID STEEL CONDUIT

PROVIDE PULL BOX, ROUTE

CONDUIT ABOVE CEILING AND

ROUTE TO D1-AA.

REVISION HISTORY OF THIS DRAWING

DECA LOG #

ENGR. FILE NO.

DRAWING NO.

DRAWN BY

AS BUILT DATE

COMMONWEALTH OF KENTUCKY

FINANCE AND ADMINISTRATION CABINET

DEPARTMENT FOR FACILITIES AND SUPPORT SERVICES

DIVISION OF ENGINEERING AND CONTRACT ADMINISTRATION

FRANKFORT, KENTUCKY

DESCRIPTION OF REVISIONS DATE DESCRIPTION OF REVISIONS DATE

CHECKED BY

PHASE

RTA DATE

DRAWING DATE

A & E FILE NO.

DRAWING INFORMATION

# 540-CBT2

ACCT# 540-CBT2

10411 Meeting Street Prospect, KY 40059

T: 502 326.3085 F: 502 326.2691

09.11.2024

VKYS23

/4 /2

P M

U s e rs \g w e s s lin g \D o c u m e n ts

\V K

Y S

-0

M c D a n ie l_ g w e s s lin g C

L F

H C

.r v t

P ro je c t

N u m b e r_

O w n e r_ R

T A

E -4

G R

O U

N D

F L O

O R

P O

W E

R /S

Y S

T E

M S

P L A

E-400

GROUND FLOOR POWER/SYSTEMS PLAN

1867 Frankfort Ave, Louisville, KY 40206

BKB

GTW

RTA

KSB SCOGGAN/MCDANIEL HVAC REVISIONS

SCALE: 1/8" = 1'-0"

GROUND FLOOR - POWER/SYSTEMS

KEYNOTES

E3 NEW LOCATION OF PUMPS RELOCATED BY MC. EC SHALL

PROVIDE NEW BRANCH CIRCUIT (FEEDER), THAT MATCHES THE

EXISTING, TO EXISTING PANEL 'D1D'.

GENERAL NOTES (POWER/SYSTEMS):

A. REFER TO THE ARCHITECT'S REFLECTED CEILING PLANS, ELEVATIONS,

AND CASEWORK DETAILS FOR EXACT LOCATIONS OF ALL WALL AND

CEILING MOUNTED ELECTRICAL DEVICES.

B. CONTRACTOR SHALL FOLLOW BRANCH CIRCUITING LAY-OUT, AS

INDICATED ON THE FLOOR PLANS, WITH A MAXIMUM OF THREE (3)

BRANCH CIRCUITS PER HOMERUN. EACH BRANCH CIRCUIT SHALL BE

PROVIDED WITH A DEDICATED NEUTRAL CONDUCTOR. DEDICATED

NEUTRAL CONDUCTORS SHALL BE CONSIDERED CURRENT

CARRYING. IF ADDITIONAL CONDUCTORS ARE RAN IN THE SAME

CONDUIT WITH THOSE INDICATED, CONTRACTOR SHALL DERATE ALL

CURRENT CARRYING CONDUCTORS PER NEC 310.15(B)(3), AND UPSIZE

CONDUIT AS REQUIRED PER NEC 300.17 AND ANNEX C. MULTIWIRE

BRANCH CIRCUITS AS DEFINED IN NEC 100 / 210.4 (CIRCUITS SHARING A

COMMON NEUTRAL CONDUCTOR) SHALL NOT BE PERMITTED.

C. IDENTIFY THE PANEL AND CIRCUIT NUMBER FOR ALL RECEPTACLES,

SWITCHES, ETC. IN AREA OF CONSTRUCTION. PROVIDE CLEAR

ADHESIVE LABELS WITH BLACK LETTERING. IN HEALTHCARE FACILITIES,

ENGRAVE EMERGENCY DEVICE COVERPLATES IN PATIENT CARE

AREAS. MARK INSIDES OF ALL DEVICE BOXES WITH PANEL AND CIRCUIT

NUMBER.

D. RECEPTACLES THAT ARE CONTROLLED BY AN AUTOMATIC MEANS

SUCH AS OCCUPANCY SENSOR OR ENERGY MANAGEMENT SYSTEM

SHALL BE MARKED IN ACCORDANCE WITH NEC 406.3(E).

E. LOCATIONS OF ELECTRICAL CONNECTIONS AND LOCAL DISCONNECTS

SHALL BE COORDINATED WITH MECHANICAL AND PLUMBING

CONTRACTORS TO ENSURE ACCESS AND WORKING CLEARANCE IS

MAINTAINED PER NEC. NOTIFY OTHER TRADES OF REQUIRED

CLEARANCE AREAS TO AVOID ROUTING OF OTHER SYSTEMS IN THESE

AREAS. DO NOT INSTALL ELECTRICAL EQUIPMENT OVER EQUIPMENT

NAMEPLATES OR ACCESS PANELS OR THROUGH

ACCESS/MAINTENANCE CLEARANCES OF EQUIPMENT BY OTHER

TRADES.

F. REFER TO "SYSTEM INSTALLATION MATRIX" (ON SYSTEMS LEGEND

SHEET) AND SPECIFICATIONS FOR CONTRACTOR REQUIREMENTS OF

EACH SYSTEM.

G. THE CONTRACTOR SHALL ROUTE ALL ''SYSTEM CONDUIT STUB-UPS'' TO

THE NEAREST CORRIDOR CABLING PATH (SEE ''STUB-UP'' DETAILS).

REFER TO CABLING PATH INSTALLATION DETAIL FOR ADDITIONAL

REQUIREMENTS.

H. CONTRACTOR SHALL PAINT ALL SYSTEMS CONDUIT STUB-UPS LIGHT

BLUE FOR SYSTEMS CABLING INTO THE CORRIDOR CABLING PATH.

PROVIDE PULL STRINGS IN ALL NEW CONDUIT RUNS FOR SYSTEM

CABLING INSTALLATION.

gwessling Text Box

ADDENDUM 1

gwessling

FAA

V V

SDSD

SD SD SD SD

F F

CLASSROOM

MULTI-PURPOSE

STORAGE

GIRLS TOILET

BOYS TOILET

CLASSROOM

CUST.

SOCIAL WORKER

RECEPTION

SOCIAL WORKER

COUNSELOR

STAIR

CLASSROOM

KITCHENETTE

SPECIAL SERVICES

TOILET

CLOSET

204A

CLOSET

CORRIDOR

BRIDGE

STAIR

PRINCIPAL'S OFFICE

GENERAL OFFICE

TOILET

SPECIAL CLASSROOM

SPECIAL STUDENT INSTRUCTION

AREA

STAFF LOUNGE

BATH

SENSORY ROOM

CLOSET

SENSORY ROOM

KITCHEN

TOILET

STORAGE

GIRLS

JANITOR

BOYS

TOILET

CONFERENCE RM 1

WORKROOM

236 STORAGE

LOBBY

SUPERVISOR

OFFICE EQUIP. AND STOCK

STORAGE

STAIR B

STAIR A

CLASSROOM

PRINCIPAL

TOILET

WORKROOM

BUISNESS OFFICE

SUPERVISOR

BOOK STORAGE

CLOSET

CONFERENCE RM 2

CORRDIOR

VESTIBULE

2-AA

2B-6

EF-2

CC-1

ERV-2

2B-5

2B-7

2B-9,11

UV-3A UV-3B UV-3C UV-4

UV-5

UV-6

2B-142B-122B-102B-8 2B-13

2A-2

REVISION HISTORY OF THIS DRAWING

DECA LOG #

ENGR. FILE NO.

DRAWING NO.

DRAWN BY

AS BUILT DATE

COMMONWEALTH OF KENTUCKY

FINANCE AND ADMINISTRATION CABINET

DEPARTMENT FOR FACILITIES AND SUPPORT SERVICES

DIVISION OF ENGINEERING AND CONTRACT ADMINISTRATION

FRANKFORT, KENTUCKY

DESCRIPTION OF REVISIONS DATE DESCRIPTION OF REVISIONS DATE

CHECKED BY

PHASE

RTA DATE

DRAWING DATE

A & E FILE NO.

DRAWING INFORMATION

# 540-CBT2

ACCT# 540-CBT2

10411 Meeting Street Prospect, KY 40059

T: 502 326.3085 F: 502 326.2691

09.11.2024

VKYS23

/4 /2

P M

U s e rs \g w e s s lin g \D o c u m e n ts

\V K

Y S

-0

M c D a n ie l_ g w e s s lin g C

L F

H C

.r v t

P ro je c t

N u m b e r_

O w n e r_ R

T A

E -4

S E

C O

N D

F L

O O

R P

O W

E R

/S Y

S T

E M

S P

L A

E-401

SECOND FLOOR POWER/SYSTEMS PLAN

1867 Frankfort Ave, Louisville, KY 40206

BKB

GTW

RTA

KSB SCOGGAN/MCDANIEL HVAC REVISIONS

SCALE: 1/8" = 1'-0"

SECOND FLOOR - POWER/SYSTEMS

KEYNOTES

E1 MECHANICAL EQUIPMENT HAS MANUFACTURER PROVIDED

INTEGRAL DISCONNECT. COORDINATE EXACT REQUIREMENTS

WITH MECHANICAL CONTRACTOR PRIOR TO CONSTRUCTION.

EC SHALL MAKE ALL CONNECTIONS.

E3 NEW LOCATION OF PUMPS RELOCATED BY MC. EC SHALL

PROVIDE NEW BRANCH CIRCUIT (FEEDER), THAT MATCHES THE

EXISTING, TO EXISTING PANEL 'D1D'.

GENERAL NOTES (POWER/SYSTEMS):

A. REFER TO THE ARCHITECT'S REFLECTED CEILING PLANS, ELEVATIONS,

AND CASEWORK DETAILS FOR EXACT LOCATIONS OF ALL WALL AND

CEILING MOUNTED ELECTRICAL DEVICES.

B. CONTRACTOR SHALL FOLLOW BRANCH CIRCUITING LAY-OUT, AS

INDICATED ON THE FLOOR PLANS, WITH A MAXIMUM OF THREE (3)

BRANCH CIRCUITS PER HOMERUN. EACH BRANCH CIRCUIT SHALL BE

PROVIDED WITH A DEDICATED NEUTRAL CONDUCTOR. DEDICATED

NEUTRAL CONDUCTORS SHALL BE CONSIDERED CURRENT

CARRYING. IF ADDITIONAL CONDUCTORS ARE RAN IN THE SAME

CONDUIT WITH THOSE INDICATED, CONTRACTOR SHALL DERATE ALL

CURRENT CARRYING CONDUCTORS PER NEC 310.15(B)(3), AND UPSIZE

CONDUIT AS REQUIRED PER NEC 300.17 AND ANNEX C. MULTIWIRE

BRANCH CIRCUITS AS DEFINED IN NEC 100 / 210.4 (CIRCUITS SHARING A

COMMON NEUTRAL CONDUCTOR) SHALL NOT BE PERMITTED.

C. IDENTIFY THE PANEL AND CIRCUIT NUMBER FOR ALL RECEPTACLES,

SWITCHES, ETC. IN AREA OF CONSTRUCTION. PROVIDE CLEAR

ADHESIVE LABELS WITH BLACK LETTERING. IN HEALTHCARE FACILITIES,

ENGRAVE EMERGENCY DEVICE COVERPLATES IN PATIENT CARE

AREAS. MARK INSIDES OF ALL DEVICE BOXES WITH PANEL AND CIRCUIT

NUMBER.

D. RECEPTACLES THAT ARE CONTROLLED BY AN AUTOMATIC MEANS

SUCH AS OCCUPANCY SENSOR OR ENERGY MANAGEMENT SYSTEM

SHALL BE MARKED IN ACCORDANCE WITH NEC 406.3(E).

E. LOCATIONS OF ELECTRICAL CONNECTIONS AND LOCAL DISCONNECTS

SHALL BE COORDINATED WITH MECHANICAL AND PLUMBING

CONTRACTORS TO ENSURE ACCESS AND WORKING CLEARANCE IS

MAINTAINED PER NEC. NOTIFY OTHER TRADES OF REQUIRED

CLEARANCE AREAS TO AVOID ROUTING OF OTHER SYSTEMS IN THESE

AREAS. DO NOT INSTALL ELECTRICAL EQUIPMENT OVER EQUIPMENT

NAMEPLATES OR ACCESS PANELS OR THROUGH

ACCESS/MAINTENANCE CLEARANCES OF EQUIPMENT BY OTHER

TRADES.

F. REFER TO "SYSTEM INSTALLATION MATRIX" (ON SYSTEMS LEGEND

SHEET) AND SPECIFICATIONS FOR CONTRACTOR REQUIREMENTS OF

EACH SYSTEM.

G. THE CONTRACTOR SHALL ROUTE ALL ''SYSTEM CONDUIT STUB-UPS'' TO

THE NEAREST CORRIDOR CABLING PATH (SEE ''STUB-UP'' DETAILS).

REFER TO CABLING PATH INSTALLATION DETAIL FOR ADDITIONAL

REQUIREMENTS.

H. CONTRACTOR SHALL PAINT ALL SYSTEMS CONDUIT STUB-UPS LIGHT

BLUE FOR SYSTEMS CABLING INTO THE CORRIDOR CABLING PATH.

PROVIDE PULL STRINGS IN ALL NEW CONDUIT RUNS FOR SYSTEM

CABLING INSTALLATION.

gwessling Text Box

ADDENDUM 1

gwessling

F F

F F F

SDSDSDSDSD

SDSDSD

F F

SD HD

F F

F F F

STAIR

MECHANICAL

CHECK-OUT

LIBRARY

STAIR

A.V. ROOM

STOR.

WORKROOM

CUST.

BOYS TOILET

GIRLS TOILET

VESTIBULE

BRIDGE

CLASSROOM

STAIR

STORAGE

CLASSROOM

STORAGE

OFFICE

BREAKROOM

CLASSROOM

CHEMICAL STORAGE RM

LABORATORY

STORAGE

BOYS

GIRLS

JAN.

OFFICE

LABORATORY

CLASSROOM

STAIRS

STORAGE

PHYSICAL THERAPY

CORRIDOR

3-AA

EF-8

3-AA-5

3B-13

3-AA-6

ERV-1

3B-17

VFCU-3

3B-15

1 1

REVISION HISTORY OF THIS DRAWING

DECA LOG #

ENGR. FILE NO.

DRAWING NO.

DRAWN BY

AS BUILT DATE

COMMONWEALTH OF KENTUCKY

FINANCE AND ADMINISTRATION CABINET

DEPARTMENT FOR FACILITIES AND SUPPORT SERVICES

DIVISION OF ENGINEERING AND CONTRACT ADMINISTRATION

FRANKFORT, KENTUCKY

DESCRIPTION OF REVISIONS DATE DESCRIPTION OF REVISIONS DATE

CHECKED BY

PHASE

RTA DATE

DRAWING DATE

A & E FILE NO.

DRAWING INFORMATION

# 540-CBT2

ACCT# 540-CBT2

10411 Meeting Street Prospect, KY 40059

T: 502 326.3085 F: 502 326.2691

09.11.2024

VKYS23

/4 /2

P M

U s e rs \g w e s s lin g \D o c u m e n ts

\V K

Y S

-0

M c D a n ie l_ g w e s s lin g C

L F

H C

.r v t

P ro je c t

N u m b e r_

O w n e r_ R

T A

E -4

T H

F L O

O R

P O

W E

R /S

Y S

T E

M S

P L A

E-402

THIRD FLOOR POWER/SYSTEMS PLAN

1867 Frankfort Ave, Louisville, KY 40206

BKB

GTW

RTA

KSB SCOGGAN/MCDANIEL HVAC REVISIONS

SCALE: 1/8" = 1'-0"

THIRD FLOOR - POWER/SYSTEMS

GENERAL NOTES (POWER/SYSTEMS):

A. REFER TO THE ARCHITECT'S REFLECTED CEILING PLANS, ELEVATIONS,

AND CASEWORK DETAILS FOR EXACT LOCATIONS OF ALL WALL AND

CEILING MOUNTED ELECTRICAL DEVICES.

B. CONTRACTOR SHALL FOLLOW BRANCH CIRCUITING LAY-OUT, AS

INDICATED ON THE FLOOR PLANS, WITH A MAXIMUM OF THREE (3)

BRANCH CIRCUITS PER HOMERUN. EACH BRANCH CIRCUIT SHALL BE

PROVIDED WITH A DEDICATED NEUTRAL CONDUCTOR. DEDICATED

NEUTRAL CONDUCTORS SHALL BE CONSIDERED CURRENT

CARRYING. IF ADDITIONAL CONDUCTORS ARE RAN IN THE SAME

CONDUIT WITH THOSE INDICATED, CONTRACTOR SHALL DERATE ALL

CURRENT CARRYING CONDUCTORS PER NEC 310.15(B)(3), AND UPSIZE

CONDUIT AS REQUIRED PER NEC 300.17 AND ANNEX C. MULTIWIRE

BRANCH CIRCUITS AS DEFINED IN NEC 100 / 210.4 (CIRCUITS SHARING A

COMMON NEUTRAL CONDUCTOR) SHALL NOT BE PERMITTED.

C. IDENTIFY THE PANEL AND CIRCUIT NUMBER FOR ALL RECEPTACLES,

SWITCHES, ETC. IN AREA OF CONSTRUCTION. PROVIDE CLEAR

ADHESIVE LABELS WITH BLACK LETTERING. IN HEALTHCARE FACILITIES,

ENGRAVE EMERGENCY DEVICE COVERPLATES IN PATIENT CARE

AREAS. MARK INSIDES OF ALL DEVICE BOXES WITH PANEL AND CIRCUIT

NUMBER.

D. RECEPTACLES THAT ARE CONTROLLED BY AN AUTOMATIC MEANS

SUCH AS OCCUPANCY SENSOR OR ENERGY MANAGEMENT SYSTEM

SHALL BE MARKED IN ACCORDANCE WITH NEC 406.3(E).

E. LOCATIONS OF ELECTRICAL CONNECTIONS AND LOCAL DISCONNECTS

SHALL BE COORDINATED WITH MECHANICAL AND PLUMBING

CONTRACTORS TO ENSURE ACCESS AND WORKING CLEARANCE IS

MAINTAINED PER NEC. NOTIFY OTHER TRADES OF REQUIRED

CLEARANCE AREAS TO AVOID ROUTING OF OTHER SYSTEMS IN THESE

AREAS. DO NOT INSTALL ELECTRICAL EQUIPMENT OVER EQUIPMENT

NAMEPLATES OR ACCESS PANELS OR THROUGH

ACCESS/MAINTENANCE CLEARANCES OF EQUIPMENT BY OTHER

TRADES.

F. REFER TO "SYSTEM INSTALLATION MATRIX" (ON SYSTEMS LEGEND

SHEET) AND SPECIFICATIONS FOR CONTRACTOR REQUIREMENTS OF

EACH SYSTEM.

G. THE CONTRACTOR SHALL ROUTE ALL ''SYSTEM CONDUIT STUB-UPS'' TO

THE NEAREST CORRIDOR CABLING PATH (SEE ''STUB-UP'' DETAILS).

REFER TO CABLING PATH INSTALLATION DETAIL FOR ADDITIONAL

REQUIREMENTS.

H. CONTRACTOR SHALL PAINT ALL SYSTEMS CONDUIT STUB-UPS LIGHT

BLUE FOR SYSTEMS CABLING INTO THE CORRIDOR CABLING PATH.

PROVIDE PULL STRINGS IN ALL NEW CONDUIT RUNS FOR SYSTEM

CABLING INSTALLATION.

KEYNOTES

gwessling Text Box

ADDENDUM 1

gwessling

225A/3P

200A/3P

(2-SECTION)

208Y/120V/3Φ/4W

2-AA

400A

NORMAL

PANEL

2ND FLOOR

NEW 2500A/208Y/120V/3P/4W

SERVICE SWITCHBOARD "MDP"

NEW LG&E

UTILITY

TRANSFORMER

400A/3P

100A/3P

400A/3P

DISTRIBUTION

PANELBOARD

"D1-AA"

208Y/120V/3Φ/4W 800A

800A/3P 100%

RATED

200A/3P

BMGB

SERVICE

GROUND

#500 Kcmil

100% RATED

SERVICE

RATED

#500 Kcmil

2500A/3P

3RD FLOOR

150A/3P

200A/3P

800A/3P

200A/3P

100A/3P

(SHUNT TRIP)

UTILITY/PULL

MAIN DIST.

EXISTING

ELEVATOR

15 HP

(2-SECTION)

208Y/120V/3Φ/4W

1-AA

400A

NORMAL

PANEL

208Y/120V/3Φ/4W

3-AA

200A

NORMAL

PANEL

208Y/120V/3Φ/4W

200A

NORMAL

PANEL

(2-SECTION)

208Y/120V/3Φ/4W

225A

NORMAL

PANEL

(2-SECTION)

208Y/120V/3Φ/4W

100A

NORMAL

PANEL

208Y/120V/3Φ/4W

200A

NORMAL

PANEL

208Y/120V/3Φ/4W

200A

NORMAL

PANEL

(2-SECTION)

208Y/120V/3Φ/4W

225A

NORMAL

PANEL

208Y/120V/3Φ/4W

150A

NORMAL

PANEL

208Y/120V/3Φ/4W

D1D

200A

NORMAL

PANEL

208Y/120V/3Φ/4W

100A

NORMAL

PANEL

EXIST.

ELEVATOR

100A/3P

EXIST.

ELEVATOR

CONTROLLER

MCDANIEL HALLSCOGGAN HALL

SPD

SPDSPD

SPD

UTILITY

TRANSFORMER

150A/3P

WWHP-1

WWHP-2

WWHP-3

WWHP-4

200A/3P

800A/3P

EXIST.

CHILLER

TO REMAIN

(SHUNT TRIP)

1SPD

EXIST.

ELEVATOR

CONTROLLER

BMGB

SERVICE

GROUND

#500 Kcmil

SPD

GROUND FLOOR

N G

SPARE

EXIST.

ELEVATOR

DISCONNECT

NEW/EXISTING

ELECTRICAL SERVICE

UTILITY POLE

PROVIDE TWO (2) 5"

SCHEDULE 80 PVC

CONDUITS 25' UP

SERVICE UTILITY POLE.

CONDUITS UP POLE TO UTILITY COMPANY

OVERHEAD PRIMARY AS REQUIRED BY

UTILITY COMPANY. TERMINATE PER

UTILITY COMPANY REQUIREMENTS.

CONTRACTOR SHALL TEMPORARILY SEAL

CONDUIT OPENINGS AS REQUIRED.

CONTRACTOR SHALL PROVIDE

TWO (2) 5" CONCRETE ENCASED SCHEDULE

40 PVC CONDUITS. 42" MINIMUM BURY TO TOP

OF CONDUIT. REFER TO DUCT BANK DETAIL.

REFER TO SITE PLAN FOR ADDITIONAL

INFORMATION AND REQUIREMENTS ON

EXISTING DUCTBANK.

PROVIDE REINFORCED

CONCRETE PROTECTION

BAND PER LG&E

REQUIREMENTS

3P/1600A FUSED

DISCONNECT SWITCH IN

NEMA 3R ENCLOSURE

1600A NEMA 3R

CT CABINET

EXISTING

1600A/208Y/120V/3P/4W

EVANS HALL

SERVICE SWITCHBOARD

"MSB"

N G

NEW LG&E

UTILITY

TRANSFORMER

UTILITY

TRANSFORMER

3P/800A FUSED

DISCONNECT

SWITCH

CT CABINETEXISTING

800A/208Y/120V/3P/4W

HARTFORD FOOD SERVICE

DISTRIBUTION PANEL

"MDP"

N G

3P/800A FUSED

DISCONNECT

SWITCH

CT CABINETEXISTING

800A/208Y/120V/3P/4W

LANGAN GYM

SERVICE

N G

100A/3P

200A/3P

100A/3P

SPARE

CONTRACTOR SHALL PROVIDE

TWO (2) 5" CONCRETE ENCASED

SCHEDULE 40 PVC CONDUITS. 42" MINIMUM

BURY TO TOP OF CONDUIT. REFER TO

DUCT BANK DETAIL. REFER TO SITE PLAN

FOR ADDITIONAL INFORMATION AND

REQUIREMENTS ON EXISTING DUCTBANK.

BMGB

SERVICE

GROUND

#500 Kcmil

100% RATED

BMGB

SERVICE

GROUND

#500 Kcmil

BMGB

SERVICE

GROUND

#500 Kcmil

PROVIDE RIGID STEEL CONDUIT

WITH LINK SEAL THROUGH

EXISTING CONCRETE WALL,

INTO BASEMENT.

PROVIDE RIGID STEEL CONDUIT

WITH LINK SEAL THROUGH

EXISTING CONCRETE WALL,

INTO BASEMENT.

FUSED

AT 800A

FUSED

AT 800A

1. PROVIDE A PARALLEL CONNECTED SURGE SUPRESSION DEVICE (SPD). UNIT

SHALL BE MOUNTED IN SWITCHBOARD. PROVIDE WITH EVENT COUNTER.

2. PROVIDE NEW SPD (SURGE PROTECTION DEVICE) CATEGORY #B UNIT FOR

PANELBOARD AS SPECIFIED (DIVISION 26 SPECIFICATIONS). PROVIDE UNIT

INTEGRAL TO PANELBOARD. PROVIDE WITH EVENT COUNTER.

3. REFER TO GROUNDING DETAIL ON SHEET E-803, FOR ADDITIONAL

REQUIREMENTS.

4. SEPARATE EXISTING NEUTRAL AND GROUND BOND.

5. PROVIDE METER PER SPECIFICATIONS.

6. PROVIDE THREE (3) SECTION 2500A/120/208V/3PH/4W SWITCHBOARD RATED AT

100kAIC MIN., SQUARE "D" QED-2 STYLE, OR EQUAL, WITH THE FOLLOWING

SECTIONS:

A. UTILITY SECTION: 42" WIDE BY 36" DEEP SECTION SHALL MEET ALL

REQUIREMENTS OF THE LOCAL UTILITY COMPANY. SUBMIT TO UTILITY

COMPANY (LG&E) PRIOR TO SUBMISSION OF SHOP DRAWINGS TO THE

ENGINEER.

B. MAIN SECTION: 36" WIDE BY 36" DEEP SECTION SHALL HOUSE 2500A/3P,

SERVICE ENTRANCE 100% RATED FULL-FUNCTION, ELECTRONIC TRIP,

MOLDED CASE "MICRO-LOGIC", MAIN CIRCUIT BREAKER WITH DIGITAL

VOLT/AMMETER AND MAINTENANCE ARC ENERGY REDUCTION SWITCH.

SECTION SHALL HOUSE MAIN SWITCHBOARD SPD DEVICE AND METER AS

SPECIFIED.

C. DISTRIBUTION SECTION(S):ONE (1) 2500A DOUBLE ROW SECTION WITH

MINIMUM 117" OF MOUNTING SPACE FOR CIRCUIT BREAKERS. EACH

SECTION IS 36" WIDE BY 36" DEEP.

7. METER BASE PER LG&E REQUIREMENTS.

8. ELECTRICAL PANEL "D1-AA" SHALL BE 800A/120/208V/3PH/4W/800A TWO-STEP,

100% RATED, ELECTRONIC TRIP, FULL FUNCTION MOLDED CASE "MICRO-

LOGIC" MAIN CIRCUIT BREAKER AND SQUARE "D" #2350 CIRCUIT MONITOR.

POWER DISTRIBUTION PANEL SHALL BE AN "I-LINE" TYPE PANEL WITH 63"

MINIMUM OF BREAKER MOUNTING SPACE, CIRCUIT BREAKERS WITH MINIMUM

RATINGS OF 75KAIC. SQUARE "D" - HCP-SU OR EQUAL. ALL REMAINING SPACE

SHALL BE FILLED WITH EQUAL AMOUNTS OF SPARE 100A/3P BREAKERS.

9. PROVIDE CT CABINET AND METER BASE PER LG&E REQUIREMENTS.

10. DO NOT BOND NEUTRAL AND GROUND.

11. CONCRETE ENCASED SWEEPING SCHEDULE 80 PVC CONDUITS (TYPICAL FOR

ALL UNDERGROUND FEEDERS)

TAGGED NOTES - POWER RISER DIAGRAM

A. PROVIDE FOUR (4) #3 AWG AND ONE (1) #8 AWG GROUND IN 1-1/4" CONDUIT.

B. PROVIDE FOUR (4) #1/0 AND ONE (1) #6 AWG GROUND IN 2" CONDUIT.

C. PROVIDE FOUR (4) #3/0 AND ONE (1) #6 AWG GROUND IN 2" CONDUIT.

D. PROVIDE FOUR (4) #4/0 AND ONE (1) #4 AWG GROUND IN 2-1/2" CONDUIT.

E. PROVIDE TWO (2) SETS [FOUR (4) #3/0 AND ONE (1) #3 AWG GROUND IN 2"

CONDUIT].

F. PROVIDE THREE (3) SETS [FOUR (4) #3/0 AND ONE (1) #1 AWG GROUND IN 2"

CONDUIT].

G. PROVIDE THREE (3) PARALLEL SETS OF [FOUR (4) 300 KCMIL AND ONE (1)

#1/0 GROUND IN 3" CONDUIT].

H. PROVIDE SEVEN (7) PARALLEL SETS OF [FOUR (4) 500 KCMIL AND ONE (1)

350 KCMIL GROUND IN CONCRETE ENCASED 4" SCHEDULE 40 PVC

CONDUIT]. REFER TO DUCT BANK DETAIL.

I. PROVIDE (2) 5" SCH. 40 PVC IN CONCRETE DUCT BANK.

J. PROVIDE FIVE (5) PARALLEL SETS OF [FOUR (4) 400 KCMIL AND ONE (1) #4/0

GROUND IN CONCRETE ENCASED 4" SCHEDULE 40 PVC CONDUIT]. REFER

TO DUCT BANK DETAIL.

K. PROVIDE THREE (3) PARALLEL SETS OF [FOUR (4) 300 KCMIL AND ONE (1)

#1/0 GROUND IN CONCRETE ENCASED 4" SCHEDULE 40 PVC CONDUIT].

REFER TO DUCT BANK DETAIL.

L. PROVIDE THREE (3) PARALLEL SETS OF [FOUR (4) 300 KCMIL AND ONE (1)

#1/0 GROUND IN 3-1/2" CONDUIT].

M. PROVIDE FIVE (5) PARALLEL SETS OF [FOUR (4) 400 KCMIL AND ONE (1) #4/0

GROUND IN 4" CONDUIT].

FEEDER SCHEDULE

REVISION HISTORY OF THIS DRAWING

DECA LOG #

ENGR. FILE NO.

DRAWING NO.

DRAWN BY

AS BUILT DATE

COMMONWEALTH OF KENTUCKY

FINANCE AND ADMINISTRATION CABINET

DEPARTMENT FOR FACILITIES AND SUPPORT SERVICES

DIVISION OF ENGINEERING AND CONTRACT ADMINISTRATION

FRANKFORT, KENTUCKY

DESCRIPTION OF REVISIONS DATE DESCRIPTION OF REVISIONS DATE

CHECKED BY

PHASE

RTA DATE

DRAWING DATE

A & E FILE NO.

DRAWING INFORMATION

# 540-CBT2

ACCT# 540-CBT2

10411 Meeting Street Prospect, KY 40059

T: 502 326.3085 F: 502 326.2691

09.11.2024

VKYS23

/4 /2

P M

U s e rs \g w e s s lin g \D o c u m e n ts

\V K

Y S

-0

M c D a n ie l_ g w e s s lin g C

L F

H C

.r v t

P ro je c t

N u m b e r_

O w n e r_ R

T A

E -5

E L E

C T

A L P

O W

E R

G R

A M

E-501

ELECTRICAL POWER RISER DIAGRAM

1867 Frankfort Ave, Louisville, KY 40206

BKB

GTW

RTA

KSB SCOGGAN/MCDANIEL HVAC REVISIONS

NO SCALE

ELECTRICAL POWER RISER DIAGRAM

GENERAL NOTES (RISER):

A. ALL NEW CONDUCTORS SHALL BE COPPER (REFER TO SPECIFICATIONS FOR TYPES).

B. REFER TO DETAILS FOR TYPICAL PANEL LABELING REQUIREMENTS.

C. REFER TO PANEL SCHEDULES FOR EQUIPMENT ACCESSORIES, BREAKER SIZES, AND RELATED INFORMATION.

D. AS PART OF THIS CONTRACT, PROVIDE A COMPREHENSIVE ARC FLASH HAZARD ANALYSIS FOR ALL POWER DISTRIBUTION DEVICES ON THIS PROJECT. PROVIDE ALL

LABELS, WARNING SIGNAGE, ETC. PER NPFA-70E AND OSHA REQUIREMENTS. ALL LABELS SHALL BE AFFIXED PRIOR TO FINAL ELECTRICAL INSPECTIONS. THE ELECTRICAL CONTRACTOR SHALL PROVIDE ALL DATA TO THE SWITCHGEAR MANUFACTURER NO LATER THAN TWO WEEKS FOLLOWING AWARD OF PROJECT AS REQUIRED TO COMPLETE THE ANALYSIS. STUDY SHALL INCLUDE ALL EXISTING EQUIPMENT IN EXISTING FACILITY. REFER TO SPECIFICATION SECTION 260573, "ELECTRICAL STUDIES", FOR ADDITIONAL REQUIREMENTS.

E. AS PART OF THIS CONTRACT, PROVIDE A COORDINATION/FAULT CURRENT STUDY FOR BREAKERS ON THIS PROJECT. STUDY SHALL INCLUDE ALL MAINS AND FEEDERS SHOWN ON THESE DRAWINGS AND SHALL EXTEND TO THE MAIN LUGS OR BREAKER OF THE FURTHEST DEVICE DOWNSTREAM. THE EMERGENCY POWER SYSTEMS SHALL BE SELECTIVELY COORDINATED TO 0.1 SECONDS THROUGH BOTH THE UTILITY AND GENERATOR DERIVED SYSTEMS. EQUIPMENT PRESENTLY SHOWN IS THE BASIS OF DESIGN - OTHER MANUFACTURERS LISTED AS EQUALS MAY NEED TO MODIFY LAYOUTS AND EQUIPMENT IN ORDER TO MEET THIS REQUIREMENT. ALL MANUFACTURERS MUST UTILIZE ELECTRONIC TRIP BREAKERS WITH ADJUSTABLE TRIP SETTINGS WHERE REQUIRED TO MEET SELECTIVE COORDINATION REQUIREMENTS. WHERE MODIFICATION TO EQUIPMENT INDICATED ON THESE DRAWINGS IS REQUIRED IN ORDER TO ACHIEVE COORDINATION, THESE CHANGES SHALL BE CLEARLY NOTED IN THE STUDY. WHERE ACTUAL BREAKER AMPACITIES ARE INCREASED TO ACHIEVE COORDINATION, THE CONTRACTOR IS RESPONSIBLE FOR INCLUDING ALL COST ASSOCIATED WITH THESE CHANGES IN THEIR BID (INCLUDING INCREASES IN FEEDER SIZES). SUBMIT STUDY AS SHOP DRAWING TO ENGINEER PRIOR TO ORDERING ANY POWER DISTRIBUTION EQUIPMENT. ANY EQUIPMENT SUBMITTED PRIOR TO SUBMISSION OF THIS STUDY WILL NOT BE REVIEWED. THE ELECTRICAL CONTRACTOR SHALL PROVIDE ALL DATA TO THE SWITCHGEAR MANUFACTURER NO LATER THAN TWO WEEKS FOLLOWING AWARD OF PROJECT AS REQUIRED TO COMPLETE THE ANALYSIS. REFER TO

SPECIFICATION SECTION 260573, "ELECTRICAL STUDIES", FOR ADDITIONAL REQUIREMENTS.

F. AS PART OF THIS CONTRACT, PROVIDE AN IEEE 1547 CERTIFICATION.

G. CONTRACTOR SHALL INSTALL SEPARATE CONDUITS, PULL BOXES, ETC. FOR EMERGENCY POWER AND NORMAL POWER FEEDERS PER NEC FOR COMPLETE SEPARATION

OF POWER SERVICES.

H. THERMAL SCAN OF PANEL AND LARGE EQUIPMENT TERMINATIONS SHALL BE PROVIDED TO OWNER AT COMPLETION OF PROJECT. CONTRACTOR TO CORRECT

DIFICIENCIES DISCOVERED AT NO ADDITIONAL COST TO CONTRACT.

I. POWER INTERRUPTIONS SHALL BE PLANNED WITH TWO WEEK MINIMUM NOTICE PRIOR TO INTERRUPTION TO EXISTING FACILITY POWER. CONTRACTOR SHALL

COORDINATE ALL EXPECTED PROCEDURES WITH OWNER AND ALL LOCAL INSPECTION AGENCIES. ONE MONTH PRIOR TO INTERRUPTING POWER, CONTRACTOR SHALL SUBMIT TO ENGINEER A DETAILED OUTLINE AND DESCRIPTION OF HOW THIS PROCEDURE IS TO TAKE PLACE, FOR HOW LONG POWER WIL BE DOWN, WHO HAS BEEN CONTACTED, ETC. THIS OUTLINE AND DESCRIPTION IS TO BE SUBMITTED AS SHOP DRAWINGS TO THE ENGINEER FOR REVIEW. NO INTERRUPTION OF MAIN SERVICE POWER SHALL OCCUR WITHOUT THE ENGINEER'S WRITTEN APPROVAL OF THE ABOVE REFERENCED MATERIAL.

J. REFER TO PANEL AND EQUIPMENT SCHEDULES FOR FEEDER AND OVERCURRENT DEVICE SIZES.

K. SERVICE EQUIPMENT SHALL BE MARKED WITH THE MAXIUM AVAILABLE FAULT-CURRENT AT THE EQUIPMENT AND THE DATE THE CALCULATION WAS PERFORMED. APPLY A

TYPE-WRITTEN ADHESIVE LABEL WITH WHITE BACKGROUND 1/2" HIGH BLACK LETTERING.

L. ALL SPD'S TO BE INTERNALLY MOUNTED. EXTERNALLY MOUNTED SPD'S ARE ACCEPTABLE, BUT MUST BE SAME MANUFACTURER AS PANEL AND SHALL BE INSTALLED PER

MANUFACTURER'S REQUIREMENTS.

M. ALL UN-USED SPACES WITHIN , DISTRIBUTION PANELBOARDS AND PANELBOARDS SHALL BE "PREPARRED SPACES" THAT ALLOW EACH INSTALLATION OF A CIRCUIT

BREAKER.

N. PROVIDE 4" THICK REINFORCED CONCRETE HOUSEKEEPING PAD UNDER SWITCHBOARDS.

O. MARK PANELBOARDS WITH THE MAXIMUM AVAILABLE FAULT-CURRENT AT THE EQUIPMENT AND THE DATE THE CALCULATION WAS PERFORMED. APPLY A TYPE-WRITTEN

ADHESIVE LABEL WITH WHITE BACKGROUND, 1/2'’ HIGH BLACK LETTERING.

P. INCREASE CONDUIT SIZE AS REQUIRED WHERE INSTALLING PVC CONDUIT UNDERGROUND.

Q. PROVIDE A REDUCED SIZE (17” X 22” MINIMUM), BUT CLEARLY READABLE, COPY OF THE AS-BUILT RISER DIAGRAM MOUNTED TO THE WALL ADJACENT TO THE MAIN

DISTRIBUTION PANEL (MDP) AT THE SERVICE ENTRANCE. IT SHALL BE LAMINATED AND RIGIDLY MOUNTED UNDER PLEXIGLAS OR OTHER MEANS THAT PROTECTS IT FROM

DAMAGE OR EASY REMOVAL.

gwessling Text Box

ADDENDUM 1

gwessling

REVISION HISTORY OF THIS DRAWING

DECA LOG #

ENGR. FILE NO.

DRAWING NO.

DRAWN BY

AS BUILT DATE

COMMONWEALTH OF KENTUCKY

FINANCE AND ADMINISTRATION CABINET

DEPARTMENT FOR FACILITIES AND SUPPORT SERVICES

DIVISION OF ENGINEERING AND CONTRACT ADMINISTRATION

FRANKFORT, KENTUCKY

DESCRIPTION OF REVISIONS DATE DESCRIPTION OF REVISIONS DATE

CHECKED BY

PHASE

RTA DATE

DRAWING DATE

A & E FILE NO.

DRAWING INFORMATION

# 540-CBT2

ACCT# 540-CBT2

10411 Meeting Street Prospect, KY 40059

T: 502 326.3085 F: 502 326.2691

09.11.2024

VKYS23

/4 /2

P M

U s e rs \g w e s s lin g \D o c u m e n ts

\V K

Y S

-0

M c D a n ie l_ g w e s s lin g C

L F

H C

.r v t

P ro je c t

N u m b e r_

O w n e r_ R

T A

E -6

P A

N E

L B

O A

R D

S C

H E

D U

L E

E-601

PANELBOARD SCHEDULES

1867 Frankfort Ave, Louisville, KY 40206

Checker

Author

RTA

KSB SCOGGAN/MCDANIEL HVAC REVISIONS

NOTES:

TOTAL ESTIMATED DEMAND CURRENT: 599 A

TOTAL CONNECTED CURRENT: 599 A

LTNG 34478 VA 100.00% 34478 VA TOTAL ESTIMATED DEMAND: 216 kVA

EQUIP 181486 VA 100.00% 181486 VA TOTAL CONNECTED LOAD: 216 kVA

LOAD CLASSIFICATION CONNECTED LOAD DEMAND FACTOR ESTIMATED DEMAND PANEL TOTALS

15 SPARE -- -- -- -- 3 100 A 100 A 0.0

14 SPARE -- -- -- -- 3 200 A 200 A 0.0

13 EXISTING CHILLER -- -- -- -- 3 800 A 800 A 0.0

12 WWHP-360 1/0 6 2" 3 200 A 150 A 39.2

11 WWHP-360 1/0 6 2" 3 200 A 150 A 39.2

10 WWHP-360 1/0 6 2" 3 200 A 150 A 39.2

9 WWHP-360 1/0 6 2" 3 200 A 150 A 39.2

8 D1-AA 3 800 A 20 A 18.3 FEEDS 1-AA, 2-AA, AND 3-AA. (100% RATED)

7 D1D 3 200 A 200 A 8.3 FEEDS 1E

6 1C 3 400 A 225 A 6.8 FEEDS 1B

5 3B 3 200 A 150 A 12.8

4 2B 3 400 A 225 A 10.8

3 ELEVATOR -- -- -- -- 3 100 A 70 A 0.0

2 2A 3 200 A 200 A 0.6 FEEDS 3A

1 1A 3 200 A 200 A 1.3

CKT CIRCUIT DESCRIPTION SETS WIRE GND COND POLES FRAME TRIP Load REMARKS

AMPERES: 2000 A MOUNTING: FLOOR SUPPLY FROM:

VOLTAGE: 208Y/120V,3P,4W SPD: Yes AVAIL FAULT CURRENT (kA):

SWITCHBOARD: MDP MAINS TYPE: MLO SCCR (kA): 22kAIC

SWITCHBOARD AND WIRING SCHEDULE

1. PROVIDE NEW BREAKER AS INDICATED 2. EXISITNG SPARE / BREAKER IN USE.

NOTES: WHERE NOT LISTED, WIRE AND CONDUIT SHALL BE MINIMUM PER SPECIFICATIONS. SPARE BREAKERS TO BE 20A/1P.

TOTAL ESTIMATED DEMAND CURRENT: 23 A

TOTAL CONNECTED CURRENT: 23 A

TOTAL ESTIMATED DEMAND: 8 kVA

EQUIP 8346 VA 100.00% 8346 VA TOTAL CONNECTED LOAD: 8 kVA

LOAD CLASSIFICATION CONNECTED LOAD DEMAND FACTOR ESTIMATED DEMAND PANEL TOTALS

TOTAL CURRENT (A): 28 A 24 A 19 A

TOTAL LOAD (kVA): 3.3 kVA 2.8 kVA 2.3 kVA

29 0.0 0.0 30 1 20 -- -- -- 1 SPARE

27 0.0 0.0 28 1 20 -- -- -- 1 SPARESPARE 1 -- -- -- 20 3

25 0.0 0.0 26 1 20 -- -- -- 1 SPARE

SPARE 1 -- -- -- 20 1 23 0.0 2.3 24

SPARE 1 -- -- -- 20 1 21 0.0 2.3 22

SPARE 1 -- -- -- 20 1 19 0.0 2.3 20

3 30 3/4" 10 10 1 CWP-1

SPARE 1 -- -- -- 20 1 17 0.0 0.0 18 1 20 -- -- -- 1 SPARE

DDC PANEL 2 20 1 15 0.5 0.0 16 1 20 -- -- -- 2 SPARE

EF-1 2 20 1 13 0.5 0.5 14 1 20 2 HFCU-1

11 0.0 0.0 12

9 0.0 0.0 10EXISTING PUMP #1 2 -- -- -- 20 3

7 0.0 0.0 8

3 40 -- -- -- 2 EXISTING PUMP #2

5 0.0 0.0 6

3 0.0 0.0 4EXISTING SPARE 2 -- -- -- 30 3

1 0.0 0.0 2

3 100 2 EXISTING PANEL '1E'

CIRCUIT DESCRIPTION NOTE WIRE GND C OCP P CKT A B C CKT P OCP C GND WIRE NOTE CIRCUIT DESCRIPTION

AMPERES: 200 A MOUNTING: SURFACE SUPPLY FROM: MDP

VOLTAGE: 208Y/120V,3P,4W SPD: Yes AVAIL FAULT CURRENT (kA):

PANEL: D1D (EXISTING PANEL) MAINS TYPE: MLO SCCR (kA):

PANELBOARD AND WIRING SCHEDULE

NOTES: WHERE NOT LISTED, WIRE AND CONDUIT SHALL BE MINIMUM PER SPECIFICATIONS. SPARE BREAKERS TO BE 20A/1P.

TOTAL ESTIMATED…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Dec 14, 2024.