Addendum #2 Revised Electrical drawings- Part 1.pdf

PDF 14 MB Posted May 11, 2026

Attached to: RFP NORTH CAMPUS BID PKG #2
Solicitation number: RFP JCI 260000001841 5
Issued by: Michigan

About this file

Written by GovTribe AI · May 12, 2026

This addendum to electrical construction drawings pertains to the Torrant Center Additions & Renovations project in Michigan, revising specifications for Division 26 (Electrical) work as part of North Campus Bid Package #2. The document establishes comprehensive requirements for electrical demolition, installation, and renovation activities, including the removal of obsolete conduit, wire, and equipment; sealing of wall and floor penetrations to maintain fire ratings; field routing of conduits along existing piping and structural steel; and patching of damaged surfaces to match adjacent finishes. Contractors are required to conduct field visits to determine the exact extent of demolition work before bidding and to verify all equipment voltages and loads prior to service installation. The addendum includes extensive electrical symbols, abbreviations, legends, and a detailed lighting fixture schedule specifying LED fixtures from manufacturers including Lithonia and Finelite, with dimming capabilities and battery backup options where required. Asbestos removal, if present, will be handled separately by the owner under a distinct contract.

The drawings encompass multiple areas of the facility with detailed demolition and new installation plans for site electrical systems, interior power distribution, lighting controls, mechanical equipment connections, and fire alarm integration. Key specifications address floor box installations with Wiremold components, conduit routing requirements (1-inch, 2-inch, and 4-inch EMT), television outlet provisions, occupancy sensor controls, and GFI protection requirements in designated spaces. The project requires coordination between the Division 26 contractor and other trades, with the fire alarm design delegated to Midwest per the notes. Alternate lighting fixtures may be submitted by bidders for pre-approval at least one week prior to bid submission, with the engineer maintaining final authority on approvals. The document references multiple existing panels and equipment locations throughout the facility and establishes standards for reusing existing infrastructure where feasible while removing and abandoning obsolete systems per specified demolition notes.

View the file

Other files

File	Type	Posted
ADVERTISEMENT FOR BID NORTH CAMPUS PACKAGE 2.doc	DOC document	May 11, 2026
JCISD North Campus PHASE 2 Addendum 3.pdf	PDF	May 11, 2026
Addendum #2 Revised Electrical drawings- Part 2.pdf	PDF	May 11, 2026
RWM Addendum #1 - JCISD North Campus.pdf	PDF	May 11, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

1. ALL WALL AND FLOOR PENETRATIONS ARE TO BE SEALED TO MAINTAIN ORIGINAL

RATING.

2. ALL CONDUITS TO BE FIELD ROUTED ALONG EXISTING PIPING AND STRUCTURAL

STEEL.

3. THE DIVISION 26 CONTRACTORS SHALL VISIT THE PROJECT AND DETERMINE THE

EXACT EXTENT OF THE DEMOLITION WORK REQUIRED BEFORE BIDDING THE PROJECT.

4. REMOVE ALL EXISTING OBSOLETE EXPOSED CONDUIT, WIRE AND UNUSED EQUIPMENT

WHERE WORK IS BEING DONE EXCEPT ITEMS NOTED OTHERWISE.

5. WHERE BUILDING SURFACES ARE DAMAGED BY THE REMOVAL OF OLD WORK,

SURFACES SHALL BE PATCHED TO MATCH ADJACENT.

6. EXISTING WORK WHICH IS PRESENTLY CONCEALED AND WHICH WILL REMAIN

CONCEALED AND DOES NOT INTERFERE WITH ANY NEW WORK OF ANY TRADE NEED

NOT BE REMOVED. HOWEVER, ALL CONDUIT SHALL BE CAPPED BELOW FINISH

SURFACE AND THEN PATCHED TO MATCH, OR AS NOTED.

7. EXISTING OPENINGS, WHICH ARE TO BE REUSED, SHALL BE MODIFIED OR ENLARGED

TO SUIT THE NEW SYSTEMS AS REQUIRED. PROVIDE ALL REQUIRED CUTTING AND

PATCHING.

8. IF ASBESTOS IS PRESENT, IT WILL BE REMOVED OR RENDERED HARMLESS UNDER

SEPARATE CONTRACT BY THE OWNER.

9. THE DIVISION 26 CONTRACTOR SHALL BE RESPONSIBLE FOR PATCHING THE EXISTING

WALLS TO MATCH THE ADJACENT SURFACES BEHIND ALL SURFACE MOUNTED

EQUIPMENT.

10. CONTRACTOR SHALL FIELD VERIFY ALL EQUIPMENT VOLTAGES AND LOADS PRIOR TO

INSTALLING SERVICE TO EQUIPMENT.

11. DRAWINGS ARE BASED ON EXISTING RECORD DOCUMENT AND CASUAL FIELD

OBSERVATION. REPORT ANY DISCREPANCIES TO ENGINEER FOR CLARIFICATION.

12. DELEGATED FIRE ALARM DESIGN TO BE PROVIDED BY MIDWEST.

GENERAL ELECTRICAL NOTES

FCPS

M C

SSCP

NCC

M P

A L B1 B2

SRS

EMERGENCY PUSH STATION

CODE BLUE STATION

TVSS

VFD

TRANSIENT VOLTAGE SURGE SUPPRESSION

VARIABLE FREQUENCY DRIVE

GLASS BREAK

DUPLEX RECEPTACLE

TEACHER STATION

ADMINISTRATION STATION

STUDENT STATION

CARD READER

CARBON MONOXIDE DETECTOR

DOCK LIGHT FIXTURE

CONTROL MODULE

TELEPHONE / DATA OUTLET

DUTY STATION

STAFF STATION

STAFF REGISTER STATION

DOME LIGHT

DUAL BED STATION

SINGLE BED STATION

BED / LIGHT INTERFACE

PENDENT INTERFACE

EMERGENCY PULL STATION

MASTER STATION

NURSE CALL CONTROLLER

NURSE CALL

ADDENDUM NOTE

PLAN NOTE

DEMOLITION NOTE

THREE PHASE MOTOR

BELL

AUDIO / VIDEO INPUT

VIDEO INPUT

WALL MOUNTED SPEAKER / CLOCK COMBO

WALL MOUNTED SPEAKERS

DUAL FACE CLOCK

CCTV CONTROL PANELCCTV

SECURITY SYSTEM CONTROL PANEL

KEY PAD

BEAM DETECTOR

MOTION DETECTOR

DOOR CONTACT

CAMERA

MONITOR MODULE

FIRE CONTROL POWER SUPPLY

VISUAL ONLY UNIT

ELECTRICAL SYMBOLS LEGEND

SINGLE RECEPTACLE (120 VOLT)

EMERGENCY RECEPTACLE

DOUBLE DUPLEX RECEPTACLE

SINGLE FACE CLOCK

FLUSH FLOOR BOX

SURFACE FLOOR BOX

SPECIAL EQUIPMENT RECEPTACLE

TELEPHONE OUTLET

DATA OUTLET

POWER POLE

JUNCTION BOX

WALL JUNCTION BOX

PULL (JUNCTION) BOX

UNDERFLOOR JUNCTION BOX

OUTLETS

LIGHT FIXTURE

STRIP FIXTURE

IN-GRADE LIGHT FIXTURE

SPOTLIGHT (number of heads shown) EXIT SIGN (face & direction as shown)

WALL MOUNT LIGHT FIXTURE

CEILING LIGHT FIXTURE

TRACK & FIXTURE

STREET TYPE POLE FIXTURE

POLE MOUNTED LIGHT FIXTURE

EXTERIOR WALL MOUNT LIGHT FIXTURE

WALLPACK LIGHT FIXTURE

SPECIAL PURPOSE LIGHT FIXTURE

HIGH BAY LIGHT FIXTURE

EMERGENCY EGRESS LIGHT FIXTURE

(number of heads shown)

EMERGENCY LIGHT FIXTURE

FIXTURES

SWITCHES

SINGLE-POLE SWITCH

DIMMER SWITCH

TIME SWITCH

KEY SWITCH

MANUAL MOTOR SWITCH

THERMAL OVERLOAD SWITCH

SWITCH WITH PILOT LIGHT

FOUR-WAY SWITCH

THREE-WAY SWITCH

CIRCUITRY and RACEWAYS

UNDERFLOOR DUCT

BUS DUCT

PLUGMOLD AS SPECIFIED

WIREMOLD AS SPECIFIED

FLEXIBLE PIGTAILS/CONNECTIONS

"CONDUIT RUN CONTINUES" INDICATION

END OF CONDUIT RUN, CAP AND STAKE

END OF CONDUIT RUN

HOME RUN (with circuit numbers)

CONDUIT STUB DOWN

CONDUIT STUB UP

CONDUIT INSTALLED

MECHANICAL

ELECTRIC WATER HEATER

ELECTRIC UNIT HEATER

PIPE TRACE HEATER

RESISTANCE HEATER, KW SHOWN

SINGLE PHASE MOTOR

SOUND and SIGNAL

INTERCOM OUTLET

MICROPHONE OUTLET

TELEVISION OUTLET

CHIME

BUZZER

VOLUME CONTROL

SPEAKER

SERVICE and EQUIPMENT

THERMOSTAT

CAPACITOR

ENCLOSED CIRCUIT BREAKER

TRANSFER SWITCH

WIREWAY

GROUND CONNECTION PER N.E.C.

TELEPHONE TERMINAL BOARD

GENERATOR, KW SHOWN

CURRENT TRANSFORMERS

UTILITY METER, AS REQUIRED

WEATHERHEAD

PANELBOARD, FLUSH MOUNTED

PANELBOARD, SURFACE MOUNTED

COMB. STARTER

MAGNETIC STARTER

FUSED DISCONNECT SWITCH

TRANSFORMER

CONTROL

xxVA connection by x/C) IRRIGATION CONTROLLER (120 volt

LIGHTING CONTACTOR

CONTROL TRANSFORMER

buttons indicated) PUSHBUTTON STATION (number of TIME CLOCK (24 hour U.O.N.)

PHOTOCELL (voltage as required)

HUMIDISTAT

FIRE ALARM

TAMPER SWITCH (furnished by FP/C) FLOW SWITCH (furnished by FP/C)

FIREFIGHTER COMMUNICATION JACK

MAGNETIC DOOR HOLDER

REMOTE INDICATING LIGHT, CLG. MTD.

REMOTE INDICATING LIGHT, WALL MTD.

END OF LINE DEVICE

ANNUNCIATOR PANEL

FIRE ALARM CONTROL PANEL

PULL STATION

SPEAKER & LIGHT

SPEAKER

HORN

DUCT SMOKE DETECTOR

HEAT DETECTOR

SMOKE DETECTOR

HORN & LIGHT

DESIGNATIONS

(by E.C.)

(by others)

FACP

ANN

EOL

1,3

UFD

F S

SWITCH STYLE OCCUPANCY SENSOROC

DIGITAL TIME SWITCH

POWER PACK

DUAL TECHNOLOGY SENSOR - 360° - 500 SQ FT

DUAL TECHNOLOGY SENSOR - 360° - 1000 SQ FT

ULTRASONIC SENSOR - 360° - 2 CIRCUIT

OCCUPANCY SENSOR / PHOTOCELL

WALL MOUNT DUAL TECHNOLOGY SENSOR

OS5

OS4

OS2

OS3

OS1

DUCT SMOKE DETECTORF/S

CEILING MOUNTED WIFI

DIGITAL EQUIPMENT METER, AS REQUIRED

POLE

PUMP

PANEL

PNL

PVC

PRV-

P-

POLY VINYL CLORIDE

POWER ROOF VENTILATOR

PULL BOX

GENERAL CONTRACTOR

GROUND

HUMIDIFIERH-

GND

GFI

GROUND FAULT INTERRUPTER

ABBREVIATIONS LEGEND

POWER

SWITCH

RECEPT

SF-

SWBD

TCC

SPEC

RGC

RTU-

PWR

VOLTS

WATTS

UNO

UH-

TYP

ROOF TOP UNIT

RECEPTACLE

SWITCHBOARD

UNDER FLOOR

SPECIFICATIONS

RIGID GALVANIZED STEEL CONDUIT

UNLESS NOTED OTHERWISE

UNDERWRITERS' LABORATORIES, INC.

TAMPER PROOF RECEPTACLE

TAMPER PROOF SWITCH

TEMPERATURE CONTROL CONTRACTOR

VERIFY LOCATION WITH OWNER

TYPICAL

UNIT HEATER

SUPPLY FAN

WITH

WITHOUT

XFMR

W/O

TRANSFORMER

WEATHER PROOF

HOUR

LIGHT

JUNCTION BOX

LIGHT CONTROL

ISOLATED GROUND

HORSEPOWER

MINIMUM

MOUNT

MAKE-UP AIR UNIT

MOTOR CONTROL CENTER

MAIN LUG ONLY

MOUNTED

MOUNTING

MAXIMUM

LIGHTING

LT FLEX

MTD

MUAU-

MTG

MLO

MIN

MAX

MCC

LTG

IMC

HVAC

HOA

NORMALLY CLOSED

NOT IN CONTRACT

NORMALLY OPEN

NOT TO SCALE

NIGHT LIGHTNL

NTS

NIC

HAND-OFF-AUTO SELECTOR SWITCH

HEATING/VENTILATING/AIR CONDITIONING

INTERMEDIATE METAL CONDUIT

LIQUID TIGHT FLEXIBLE METAL CONDUIT

MECHANICAL CONTRACTOR

HID HIGH INTENSITY DISCHARGE

AFF

ACU-

AHJ

AHU-

B-

AIC

ATS

BLDG

CHLR-

CND (C)

CKT BKR

CKT

CUH-

CU-

DISC

DFU-

EF-

DWH-

EBB-

DWG

CT-

EXIST./EX.

EWC

FLEX

FLA

FLR

FSES

FLUOR

EMT

ABOVE FINISHED FLOOR

AIR CONDITIONING UNIT

AMPS

ABOVE COUNTER

AIR HANDLING UNIT

AUTOMATIC TRANSFER SWITCH

AMPS INTERRUPTING CAPACITY

AUTHORITY HAVING JURISDICTION

ABOVE SHELF

BOILER

BUILDING

BELOW COUNTER

CHILLER

DOMESTIC WATER HEATER

CABINET UNIT HEATER

CIRCUIT

CIRCUIT BREAKER

CONDUIT

CONDENSING UNIT

COOLING TOWER

DUCT FURNACE

DRAWING

DISCONNECT

FOOD SERVICE EQUIP. SUPPLIER

ELECTRIC WATER COOLER

ELECTRICAL CONTRACTOR

ELECTRIC BASEBOARD

ELECTRICAL METALLIC TUBING

EXISTING

EXHAUST FAN

FLOOR

FLUORESCENT

FLEXIBLE CONDUIT

FULL LOAD AMPS

EM EMERGENCY

F/S FIRE/SMOKE

FU- FURNACE

2X4 LED FLAT PANEL.

FIXTURE

MOUNTING

HEIGHT

LIGHT ENGINEDESCRIPTION AND COMMENTSTYPE MANUFACTURER CATALOG NO.

LIGHTING FIXTURE SCHEDULE

LITHONIA CPX-2X4-3000LM-80CRI-SWL-MIN10-ZT-MVOLT

CPX-2X4-3000LM-80CRI-SWL-MIN10-ZT-MVOLT-E10WLITHONIA

3G-DL45RF-10-H95-35K-60D-UNV-DIM-WT-WI-NC3G LIGHTING

3G-DL45RF-10-H95-35K-60D-UNV-DIM-WT-WI-NC-EMB3G LIGHTING

3G LIGHTING

HP-3-R-D-6'-S-835-DSO-120-SC-FC-10%FINELITE

HP-3-R-D-8'-S-835-DSO-120-SC-FC-10%

C8EM

B2EM

B1EM

AEM

2X4 LED FLAT PANEL EQUIPPED WITH INTEGRAL 10W BATTERY BACKUP.

4" LED ROUND FIXED DOWNLIGHT.

4" LED ROUND FIXED DOWNLIGHT EQUIPPED WITH 7W INTEGRAL BATTERY BACKUP.

6' LED RECESSED LINEAR WITH 3" APERTURE.

8' LED RECESSED LINEAR WITH 3" APERTURE.

8' LED RECESSED LINEAR WITH 3" APERTURE WITH 10W INTEGRAL BATTERY BACKUP.HP-3-R-D-8'-S-835-DSO-120-SC-FC-10%-LGD10W

RECESSED

3000 LUMENS

24.6W, 3500K

LED

3000 LUMENS

24.6W, 3500K

LED

RECESSED

1000 LUMENS

9.0W, 3500K

LED

DIMMING INFO

0-10V

TO 10%

C8B 8' LED RECESSED LINEAR WITH 3" APERTURE.HP-3-R-D-8'-B-835-DSO-120-SC-FC-10%

C12 12' LED RECESSED LINEAR WITH 3" APERTURE.HP-3-R-D-12'-B-835-DSO-120-SC-FC-10%

D LED WALL PACK WITH TYPE IV WIDE OPTICS AND BRONZE FINISH.MCGRAW-EDISON GWC-SA1-A-740-U-T4W-BZ-BPC

4900 LUMENS

34.0W, 4000K

LED

8' ABOVE GRADE

XA SINGLE FACE EXIT SIGN WITH BRUSHED ALUMINUM FACE AND RED LETTERS.LITHONIA LQC-1-R-EL N LED-

0-10V

TO 10%

0-10V

4" LED ROUND FIXED DOWNLIGHT.

4" LED ROUND FIXED DOWNLIGHT EQUIPPED WITH 7W INTEGRAL BATTERY BACKUP.

3G-DL45RF-15-H95-35K-60D-UNV-DIM-WT-WI-NC-EMB

FINELITE

0-10V

TO 10%

0-10V

TO 10%

0-10V

TO 10%

0-10V

TO 10%

0-10V

TO 10%

0-10V

TO 10%

0-10V

TO 10%

0-10V

TO 10%

0-10V

TO 10%

RECESSED

1000 LUMENS

9.0W, 3500K

LED

1500 LUMENS

13.7W, 3500K

LED

1500 LUMENS

13.7W, 3500K

LED

3630 LUMENS

40.2W, 3500K

LED

4840 LUMENS

53.6W, 3500K

LED

4840 LUMENS

53.6W, 3500K

LED

6056 LUMENS

58.4W, 3500K

LED

7260 LUMENS

80.4W, 3500K

LED

XB LITHONIA AFF-OEL-DBLBXD-UVOLT-LTP-SDRT-WT-CW ARCHITECTURAL EMERGENCY LIGHT WITH COLD WEATHER RESISTANCE. -- LED

DIMMABLE SWITCH STYLE OCCUPANCY SENSOROCD

HP-3-R-D-6'-S-835-DSO-120-SC-FC-10%-LGD10WFINELITEC6EM 6' LED RECESSED LINEAR WITH 3" APERTURE WITH 10W INTEGRAL BATTERY BACKUP. 0-10V

TO 10% RECESSED

3630 LUMENS

40.2W, 3500K

LED

C12EM 12' LED RECESSED LINEAR WITH 3" APERTURE WITH 10W INTEGRAL BATTERY BACKUP.HP-3-R-D-12'-B-835-DSO-120-SC-FC-10%-LGD10WFINELITE 0-10V

TO 10% RECESSED

7260 LUMENS

80.4W, 3500K

LED

DEM LED WALL PACK WITH TYPE IV WIDE OPTICS AND BRONZE FINISH.MCGRAW-EDISON 8' ABOVE GRADE0-10VGWC-SA1-A-740-U-T4W-BZ-CBP-BPC

4900 LUMENS

34.0W, 4000K

LED

CLX-L48-4000LM-SEF-WDL-MVOLT-GZ1-40K-80CRI-WHLITHONIAE 4' LED STRIP FIXTURE.

4000 LUMENS

38W, 3500K

LED

SUSPENDED0-10V1. ALTERNATE LIGHTING MANUFACTURERS EQUIPMENT SHALL BE SIMILAR IN

PERFORMANCE, PHYSICAL APPEARANCE, AND CONSTRUCTION SHALL BE

CONSIDERED AS EQUAL TO FIXTURES SPECIFIED.

2. ALTERNATE FIXTURES PROPOSED BY BIDDING CONTRACTOR MUST BE

PRE-APPROVED DURING BIDDING. CONTRACTOR OR LIGHTING REPRESENTATIVE

SHALL EMAIL ALL FIXTURE CUT SHEETS TO ENGINEER AT LEAST 1 WEEK PRIOR TO

SUBMITTING BIDS. ENGINEER SHALL REVIEW THE PROPOSED FIXTURES AND ISSUE AN

ACCEPTANCE OR DENIAL. SHOP DRAWINGS SUBMITTED AFTER AWARD FOR FIXTURES

WHICH WERE NOT PRE-APPROVED ARE SUBJECT TO BEING REJECTED. ENGINEER

SHALL HAVE FINAL AUTHORITY ON APPROVAL OF THE PROPOSED ALTERNATIVE

FIXTURES. ALTERNATE SUBMISSION SHALL DEMONSTRATE A SAVINGS TO THE OWNER

OR INCREASE IN QUALITY TO BE REVIEWED.

3. ALTERNATE FIXTURES FOR TYPE "D" ARE NOT ALLOWED.

FIXTURE SCHEDULE NOTES

1X4 LED FLAT PANEL WITH SURFACE MOUNT KIT.LITHONIA CPX-1X4-2000LM-80CRI-SWL-MIN10-ZT-MVOLT; 1X4SMKSHF SURFACE

2000 LUMENS

17.2W, 3500K

LED

0-10V

TO 10%

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E L E C

T R

A L S

Y M

B O

L S

O T E S

A B

B R

E V

A N

D S

C H

E D

U L E S

STOP

VAN

STOP

VAN

S T

O P

V A

1 1 1

EXISTING PNL "C"

EXISTING PNL "C2"

EXISTING PNL "D"

EXISTING PNL "D2"

EXISTING LIGHT FIXTURE TO REMAIN.

EXISTING LIGHT FIXTURE, POLE, AND BASE TO REMAIN.

DISCONNECT & REMOVE EXISTING LIGHT FIXTURE AND POLE. ASSOCIATED

POLE BASE, CONDUIT, AND WIRE TO REMAIN.

DISCONNECT & REMOVE EXISTING LIGHT FIXTURE, POLE, AND BASE.

REMOVE ASSOCIATED CONDUIT AND WIRE BACK TO NEW HANDHOLE.

CONDUIT AND WIRE SHALL BE EXTENDED TO NEAREST ADJACENT POLE IN

NEW LAYOUT.

DISCONNECT & REMOVE EXISTING LIGHT FIXTURE, POLE, AND BASE.

REMOVE ASSOCIATED WIRE BACK TO SOURCE. REMOVE ASSOCIATED

CONDUIT TO 18" BELOW GRADE, AND ABANDON IN PLACE.

DEMOLITION NOTES

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

N ELECTRICAL SITE PLAN - DEMOLITION

SCALE: 1" = 50'-0"

1050 20 40 80 125

E L E C

T R

A L

E P

L A N

D E M

O L

ELECTRICAL KEY NOTES

CONTRACTOR SHALL REUSE EXISTING POLE BASE FOR NEW POLE.

CONTRACTOR SHALL VERIFY EXISTING BOLT PATTERN, PRIOR TO ORDERING

POLES. CONTRACTOR SHALL REUSE EXISTING CONDUIT AND WIRE FOR NEW

FIXTURE.

CONTRACTOR SHALL PROVIDE AND INSTALL NEW POLE BASE AT NEW

LOCATION. CONTRACTOR SHALL PROVIDE AND INSTALL NEW CONDUIT AND

WIRE FOR NEW FIXTURE. EXTEND EXISTING CIRCUIT FROM NEAREST

ADJACENT FIXTURE.

CONTRACTOR SHALL PROVIDE AND INSTALL NEW EAGLE MOUNTAIN

NIGHTMASTER FLAGPOLE, WITH INTEGRATED LIGHT AT TOP. COORDINATE

WIRING REQUIREMENTS WITH MANUFACTURER RECOMMENDATIONS. LIGHT

SHALL BE CONTROLLED BY NEW PHOTOCELL, WITH LOCAL OVERRIDE

SWITCH LOCATED IN BUILDING. COORDINATE SWITCH LOCATION AND POLE

HEIGHT WITH OWNER.

CONTRACTOR SHALL PROVIDE AND INSTALL NEW 13"x24"x12" OPEN BOTTOM

HANDHOLE QUAZITE #PC1324BA12 WITH DIVIDER. CONTRACTOR SHALL

PROVIDE AND INSTALL REQUIRED BOX EXTENSIONS TO ACHIEVE PROPER

CONDUIT DEPTH. PROVIDE "ELECTRIC" COVER #PC1324CA0017. REFER TO

DETAIL FOR MORE INFORMATION.

COMMUNICATIONS HANDHOLE, AS SPECIFIED IN DETAIL.

ELECTRICAL HANDHOLE, AS SPECIFIED IN DETAIL.

CONTRACTOR SHALL PROVIDE AND INSTALL (1) 1-1/2" CONDUIT FOR

EXTERIOR SIGN POWER. CONTRACTOR SHALL PROVIDE AND INSTALL NEW

13"X24"X12" OPEN BOTTOM HANDHOLE QUAZITE #PC1324BA12 WITH DIVIDER.

CONTRACTOR SHALL PROVIDE AND INSTALL REQUIRED BOX EXTENSIONS

TO ACHIEVE PROPER CONDUIT DEPTH. PROVIDE "ELECTRIC" COVER

#PC1324CA0017. REFER TO DETAIL FOR MORE INFORMATION.

ALL NEW POWER AND DATA PATHWAYS SHALL BE ROUTED THROUGH THIS

ADDITION, FOR CONNECTION TO ASSOCIATED PANEL AND DATA

TERMINATION LOCATIONS.

1. ALL FIXTURES, NEW AND EXISTING, SHALL BE CONTROLLED BY NEW TIMECLOCK.

FIXTURES SHALL HAVE INTEGRAL PHOTOCELL, TO BE UTILIZED FOR CONTROLS, WITH

TIMECLOCK FOR SCHEDULED ON/OFF.

2. THE EXISTING FIELD CONDITIONS AND WIRING IS NOT KNOWN, CONTRACTOR SHALL

FIELD VERIFY AS NEEDED.

GENERAL ELECTRICAL NOTES

UNDERGROUND RACEWAY LEGEND

UNDERGROUND ELECTRICAL RACEWAY: CONDUIT SHALL BE ROUTED BACK

TO PANEL.

UNDERGROUND COMMUNICATIONS RACEWAY: CONDUIT SHALL BE ROUTED

BACK TO I.T. RACK.

11 9

B U

S E

S O

14141414

2151515

BUSES

ONLY

STOP

VAN

STOP

VAN

S T

O P

V A

T5W

T5W T5W

T5W T5W 2 2

T5W

T4W

2T4FT

T4FT

T2-HSS

T4W

SL2 2

SL2

SL2 2

SL22

SL2

6 (TYP.)

(TYP.)

7HH

(2) #6

(1) #10 GND

1" CND

(3) #10

(1) #10 GND

1" CND

(3) #4

(1) #10 GND

1" CND

(3) #6

(1) #10 GND

1" CND

(3) #8

(1) #10 GND

1" CND

(3) #8

(1) #10 GND

1" CND

(3) #6

(1) #10 GND

1" CND

R-13

R-38,40 R-42,44

R-39,41

R-43,44

R-47,49

EXISTING PNL "C"

EXISTING PNL "C2"

EXISTING PNL "D"

EXISTING PNL "D2"

EX EX EX

(2) #4

(1) #10 GND

1" CND

D2-2

C2-3

D2-4

D2-5,6

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

N ELECTRICAL SITE PLAN - NEW

SCALE: 1" = 50'-0"

1050 20 40 80 125

E L E C

T R

A L

E P

L A N

DISCONNECT & REMOVE EXISTING SURFACE TELEPHONE CABLE, MASTS,

AND SLEEVES. COORDINATE TELEPHONE REMOVAL WITH OWNER.

DEMOLITION NOTES1

A E6

A E7

B E8

B E9

C E10

D E11

E E12

F E13

G E14

H E15

I E16

J E17K

E18

L E19

M E20

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

N COMPOSITE ELECTRICAL FLOOR PLAN - DEMOLITION

C O

M P O

E E L E C

T R

A L F

L O

O R

P L A N

E M

O L

SCALE: 1/32" = 1'-0"

0 51 10 25 80

EX Q

EX R

GFI

J J

S S

F C

WEATHERHEAD

(ON ROOF)

72"

AFF

EWC

3 3

3 3 3

C J J

GFI

EXIST. PNL

"P"

EXISTING DEVICE TO REMAIN.

EXISTING EQUIPMENT TO REMAIN.

DISCONNECT AND REMOVE ALL EXISTING ELECTRICAL DEVICES IN THIS

SPACE, UNLESS NOTED OTHERWISE. REMOVE CONDUIT AND WIRE BACK TO

SOURCE.

DISCONNECT AND REMOVE EXISTING PANEL. REFER TO SHEET E-900 FOR

RELOCATED BRANCH CIRCUITS. EXTEND CONDUIT AND WIRE AS NEEDED TO

NEW PANEL SPECIFIED.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. REMOVE ASSOCIATED

CONDUIT AND WIRE BACK TO SOURCE.

CAP AND REMOVE ABANDONED ELECTRICAL CONDUIT AND WIRE IN THIS

LOCATION.

DISCONNECT AND REMOVE EXISTING DEVICE FOR CEILING MODIFICATIONS.

REINSTALL IN CEILING WHEN COMPLETE.

DEMOLITION NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - POWER DEMOLITION - AREA "A"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

P A R

L F

L O

O R

P L A N

O W

E R

D E M

O L

R E A A

N KEY PLAN

NOT TO SCALE

3 3

11111 11

1 1

55555

EXISTING LIGHT FIXTURE TO REMAIN.

EXISTING DEVICE TO REMAIN.

DISCONNECT AND REMOVE ALL EXISTING LIGHT FIXTURES IN THIS SPACE,

UNLESS NOTED OTHERWISE. REMOVE CONDUIT AND WIRE BACK TO

SOURCE.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURE FOR CEILING

MODIFICATIONS. REINSTALL IN CEILING WHEN COMPLETE.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURES AND DEVICES FOR

CEILING MODIFICATIONS. REMOVE CONDUIT AND WIRE BACK TO NEAREST

JUNCTION BOX.

DEMOLITION NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - LIGHTING DEMOLITION - AREA "B"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

P A R

L F

L O

O R

P L A N

G D

E M

O L

R E A B

EXISTING DEVICE TO REMAIN.

EXISTING EQUIPMENT TO REMAIN.

DISCONNECT AND REMOVE ALL EXISTING ELECTRICAL DEVICES IN THIS

SPACE, UNLESS NOTED OTHERWISE. REMOVE CONDUIT AND WIRE BACK TO

SOURCE.

DISCONNECT AND REMOVE EXISTING PANEL. REFER TO SHEET E-900 FOR

RELOCATED BRANCH CIRCUITS. EXTEND CONDUIT AND WIRE AS NEEDED TO

NEW PANEL SPECIFIED.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. REMOVE ASSOCIATED

CONDUIT AND WIRE BACK TO SOURCE.

CAP AND REMOVE ABANDONED ELECTRICAL CONDUIT AND WIRE IN THIS

LOCATION.

DISCONNECT AND REMOVE EXISTING DEVICE FOR CEILING MODIFICATIONS.

REINSTALL IN CEILING WHEN COMPLETE.

DEMOLITION NOTES

EX Q

EX R

GFI

J J

(ON ROOF)

72"

AFF

C C

EWC

3 3

3 C J J

GFI

J J

CU CU

CUH

EXIST. PNL

"P"

EXIST. PNL

"DP3"

5UV

8 8

7 7

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - POWER DEMOLITION - AREA "B"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

P A R

L F

L O

O R

P L A N

O W

E R

D E M

O L

R E A B

EXISTING EQUIPMENT TO REMAIN.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

EXISTING LIGHTING CONTROL DEVICE TO REMAIN.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURES. REMOVE CONDUIT

AND WIRE BACK TO SOURCE.

REMOVE LIGHTING CONTROL DEVICE. REMOVE CONDUIT AND WIRE. PATCH

AND PAINT WALL TO MATCH EXISTING.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. REMOVE CONDUIT AND

WIRE BACK TO SOURCE.

DISCONNECT AND RELOCATE EXISTING EQUIPMENT. REMOVE ASSOCIATED

CONDUIT AND WIRE BACK TO SOURCE.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURE FOR CEILING

MODIFICATIONS. REINSTALL IN CEILING WHEN COMPLETE.

DEMOLITION NOTES

EXIST. PNL

"N"

EXIST. PNL

"A"

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - POWER DEMOLITION - AREA "C"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E10

P A R

L F

L O

O R

P L A N

O W

E R

D E M

O L

R E A C

CONV

1 1

CONV

EXIST. PNL

"M"

EXIST. PNL

"L"

EXIST. PNL

"X"

EXIST. PNL

"K"

EXIST. PNL

"J"

EXIST. PNL

"MDP"

9 9

EXISTING EQUIPMENT TO REMAIN.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

EXISTING LIGHTING CONTROL DEVICE TO REMAIN.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURES. REMOVE CONDUIT

AND WIRE BACK TO SOURCE.

REMOVE LIGHTING CONTROL DEVICE. REMOVE CONDUIT AND WIRE. PATCH

AND PAINT WALL TO MATCH EXISTING.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. REMOVE CONDUIT AND

WIRE BACK TO SOURCE.

DISCONNECT AND RELOCATE EXISTING EQUIPMENT. REMOVE ASSOCIATED

CONDUIT AND WIRE BACK TO SOURCE.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURE FOR CEILING

MODIFICATIONS. REINSTALL IN CEILING WHEN COMPLETE.

DEMOLITION NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - POWER DEMOLITION - AREA "D"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E11

P A R

L F

L O

O R

P L A N

O W

E R

D E M

O L

R E A D

CONV

PTAC

CONV

PTAC

CONV

1 1

CONV

4 5

EXIST. PNL

"L"

EXIST. PNL

"X"EXIST. PNL

"MDP"

EXIST. PNL

"G"

EXIST. PNL

"H"

EXIST. PNL

"DP2"

EXIST. PNL

"F"

9 9

EXISTING EQUIPMENT TO REMAIN.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

EXISTING LIGHTING CONTROL DEVICE TO REMAIN.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURES. REMOVE CONDUIT

AND WIRE BACK TO SOURCE.

REMOVE LIGHTING CONTROL DEVICE. REMOVE CONDUIT AND WIRE. PATCH

AND PAINT WALL TO MATCH EXISTING.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. REMOVE CONDUIT AND

WIRE BACK TO SOURCE.

DISCONNECT AND RELOCATE EXISTING EQUIPMENT. REMOVE ASSOCIATED

CONDUIT AND WIRE BACK TO SOURCE.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURE FOR CEILING

MODIFICATIONS. REINSTALL IN CEILING WHEN COMPLETE.

DEMOLITION NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - POWER DEMOLITION - AREA "E"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E12

P A R

L F

L O

O R

P L A N

O W

E R

D E M

O L

R E A E

CONVCONVCONVCONV

F F

CU CU CU CU

1 1 1 1

22 F F 22

22 2 2

EXIST. PNL

"B"

EXIST.

PNL

"DP1A"

EXIST. PNL

"B1"

EXIST. PNL

"B2"

EXIST. PNL

"DP1"

EXISTING EQUIPMENT TO REMAIN.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

EXISTING LIGHTING CONTROL DEVICE TO REMAIN.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURES. REMOVE CONDUIT

AND WIRE BACK TO SOURCE.

REMOVE LIGHTING CONTROL DEVICE. REMOVE CONDUIT AND WIRE. PATCH

AND PAINT WALL TO MATCH EXISTING.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. REMOVE CONDUIT AND

WIRE BACK TO SOURCE.

DISCONNECT AND RELOCATE EXISTING EQUIPMENT. REMOVE ASSOCIATED

CONDUIT AND WIRE BACK TO SOURCE.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURE FOR CEILING

MODIFICATIONS. REINSTALL IN CEILING WHEN COMPLETE.

DEMOLITION NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - POWER DEMOLITION - AREA "F"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E13

P A R

L F

L O

O R

P L A N

O W

E R

D E M

O L

R E A F

CONV

F F

CONV

EXIST. PNL

"C1"

EXIST. PNL

"C2"

EXIST. PNL

"C"

CONV

EXIST. PNL

"D"

EXIST. PNL

"D1"

EXIST. PNL

"D2"

EXISTING EQUIPMENT TO REMAIN.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

EXISTING LIGHTING CONTROL DEVICE TO REMAIN.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURES. REMOVE CONDUIT

AND WIRE BACK TO SOURCE.

REMOVE LIGHTING CONTROL DEVICE. REMOVE CONDUIT AND WIRE. PATCH

AND PAINT WALL TO MATCH EXISTING.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. REMOVE CONDUIT AND

WIRE BACK TO SOURCE.

DISCONNECT AND RELOCATE EXISTING EQUIPMENT. REMOVE ASSOCIATED

CONDUIT AND WIRE BACK TO SOURCE.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURE FOR CEILING

MODIFICATIONS. REINSTALL IN CEILING WHEN COMPLETE.

DEMOLITION NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - POWER DEMOLITION - AREA "G"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E14

P A R

L F

L O

O R

P L A N

O W

E R

D E M

O L

R E A G

AHU

BLR

CUH

CONV CONV CONV CONV CONV CONV

CONVCONV

1 1 1 1 1 1

CONV

EXIST. PNL

"F"

EXIST. PNL

"E"

EXISTING EQUIPMENT TO REMAIN.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

EXISTING LIGHTING CONTROL DEVICE TO REMAIN.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURES. REMOVE CONDUIT

AND WIRE BACK TO SOURCE.

REMOVE LIGHTING CONTROL DEVICE. REMOVE CONDUIT AND WIRE. PATCH

AND PAINT WALL TO MATCH EXISTING.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. REMOVE CONDUIT AND

WIRE BACK TO SOURCE.

DISCONNECT AND RELOCATE EXISTING EQUIPMENT. REMOVE ASSOCIATED

CONDUIT AND WIRE BACK TO SOURCE.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURE FOR CEILING

MODIFICATIONS. REINSTALL IN CEILING WHEN COMPLETE.

DEMOLITION NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

PARTIAL FLOOR PLAN - POWER DEMOLITION - AREA "H" (ALTERNATE)

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E15

P A R

L F

L O

O R

P L A N

O W

E R

D E M

O L

R E A H

EXIST. PNL

"W"

EXIST. PNL

"V"

EXISTING EQUIPMENT TO REMAIN.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

EXISTING LIGHTING CONTROL DEVICE TO REMAIN.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURES. REMOVE CONDUIT

AND WIRE BACK TO SOURCE.

REMOVE LIGHTING CONTROL DEVICE. REMOVE CONDUIT AND WIRE. PATCH

AND PAINT WALL TO MATCH EXISTING.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. REMOVE CONDUIT AND

WIRE BACK TO SOURCE.

DISCONNECT AND RELOCATE EXISTING EQUIPMENT. REMOVE ASSOCIATED

CONDUIT AND WIRE BACK TO SOURCE.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURE FOR CEILING

MODIFICATIONS. REINSTALL IN CEILING WHEN COMPLETE.

DEMOLITION NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - POWER DEMOLITION - AREA "I"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E16

P A R

L F

L O

O R

P L A N

O W

E R

D E M

O L

R E A I"

EXIST. PNL

"V"

EXIST. PNL

"RP-AA"

EXISTING EQUIPMENT TO REMAIN.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

EXISTING LIGHTING CONTROL DEVICE TO REMAIN.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURES. REMOVE CONDUIT

AND WIRE BACK TO SOURCE.

REMOVE LIGHTING CONTROL DEVICE. REMOVE CONDUIT AND WIRE. PATCH

AND PAINT WALL TO MATCH EXISTING.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. REMOVE CONDUIT AND

WIRE BACK TO SOURCE.

DISCONNECT AND RELOCATE EXISTING EQUIPMENT. REMOVE ASSOCIATED

CONDUIT AND WIRE BACK TO SOURCE.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURE FOR CEILING

MODIFICATIONS. REINSTALL IN CEILING WHEN COMPLETE.

DEMOLITION NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - POWER DEMOLITION - AREA "J"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E17

P A R

L F

L O

O R

P L A N

O W

E R

D E M

O L

R E A J

EXIST. PNL

"V"

EXIST. PNL

"T"

EXIST.

POOL "PNL

#1"

EXISTING EQUIPMENT TO REMAIN.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

EXISTING LIGHTING CONTROL DEVICE TO REMAIN.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURES. REMOVE CONDUIT

AND WIRE BACK TO SOURCE.

REMOVE LIGHTING CONTROL DEVICE. REMOVE CONDUIT AND WIRE. PATCH

AND PAINT WALL TO MATCH EXISTING.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. REMOVE CONDUIT AND

WIRE BACK TO SOURCE.

DISCONNECT AND RELOCATE EXISTING EQUIPMENT. REMOVE ASSOCIATED

CONDUIT AND WIRE BACK TO SOURCE.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURE FOR CEILING

MODIFICATIONS. REINSTALL IN CEILING WHEN COMPLETE.

DEMOLITION NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - POWER DEMOLITION - AREA "K"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E18

P A R

L F

L O

O R

P L A N

O W

E R

D E M

O L

R E A K

RTU

2 2

EXIST. PNL

"A1"

EXIST. PNL

"A2"

EXISTING EQUIPMENT TO REMAIN.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

EXISTING LIGHTING CONTROL DEVICE TO REMAIN.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURES. REMOVE CONDUIT

AND WIRE BACK TO SOURCE.

REMOVE LIGHTING CONTROL DEVICE. REMOVE CONDUIT AND WIRE. PATCH

AND PAINT WALL TO MATCH EXISTING.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. REMOVE CONDUIT AND

WIRE BACK TO SOURCE.

DISCONNECT AND RELOCATE EXISTING EQUIPMENT. REMOVE ASSOCIATED

CONDUIT AND WIRE BACK TO SOURCE.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURE FOR CEILING

MODIFICATIONS. REINSTALL IN CEILING WHEN COMPLETE.

DEMOLITION NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - POWER DEMOLITION - AREA "L"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E19

P A R

L F

L O

O R

P L A N

O W

E R

D E M

O L

R E A L

EXIST. PNL

"Q"

EXIST. PNL

"S"

EXIST. PNL

"T"

EXIST.

POOL "PNL

#1"

EXIST. PNL

"R"

B-1

B-2

B-1

B-26

EXISTING EQUIPMENT TO REMAIN.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

EXISTING LIGHTING CONTROL DEVICE TO REMAIN.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURES. REMOVE CONDUIT

AND WIRE BACK TO SOURCE.

REMOVE LIGHTING CONTROL DEVICE. REMOVE CONDUIT AND WIRE. PATCH

AND PAINT WALL TO MATCH EXISTING.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. REMOVE CONDUIT AND

WIRE BACK TO SOURCE.

DISCONNECT AND RELOCATE EXISTING EQUIPMENT. REMOVE ASSOCIATED

CONDUIT AND WIRE BACK TO SOURCE.

DISCONNECT AND REMOVE EXISTING EQUIPMENT. ASSOCIATED CONDUIT

AND WIRE TO REMAIN FOR CONNECTION TO NEW EQUIPMENT.

DISCONNECT AND REMOVE EXISTING LIGHT FIXTURE FOR CEILING

MODIFICATIONS. REINSTALL IN CEILING WHEN COMPLETE.

DEMOLITION NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - POWER DEMOLITION - AREA "M"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E20

P A R

L F

L O

O R

P L A N

O W

E R

D E M

O L

R E A M

A E22

B E23

E E24

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

N COMPOSITE ELECTRICAL FLOOR PLAN - LIGHTING

E21

C O

M P O

E E L E C

T R

A L F

L O

O R

P L A N

D D

OS4

OS4 OS4

OS4

OC OC

OS4

AEM

A A

AAA

A A A A

A A

AEM A

A A

AEM AEM

AEM

XA XA

B2 B2

B2EM

B1 B1 B1

B1 B1

B1EM

B1 B1EM

C8B

C6 C6 C6

C12

(E) (E) (E) (E) (E) (E)

(E)(E)(E)(E)

(E)

DEM

OS4

OS4 OS4

OS4

AEM

AEMAEM

AAA

D D

AEM

Q-2

Q-4

Q-4 Q-4

Q-4

Q-4 Q-4

Q-4

Q-4 Q-4

Q-4

N-13

NEW

PNL "P"

EXIST.

PNL "DP3"

OS4

OCD

OS4

D D

N-13

AA AEM

AA A

B2B2EMB2B2EM

A A

A AAEM

AEM

A A A A

A A A

DDDD

F F

F FF

D D

DDDDD

OS4

OC OC OC

ELECTRICAL KEY NOTES

FOR TEMPORARY ENCLOSURE DURING CONSTRUCTION, CONTRACTOR

SHALL INSTALL (3) B2 FIXTURES IN THIS AREA, WITH (1) FIXTURE HAVING

BATTERY BACKUP.

FIXTURES SHALL BE INSTALLED FOR TEMPORARY ENCLOSURE DURING

CONSTRUCTION.

FIXTURES SHALL BE CONTROLLED THROUGH INTEGRAL PHOTOCELL, AND

NEW BUILDING TIMECLOCK.

REINSTALLED LIGHT FIXTURE.

REUSE EXISTING LIGHTING CIRCUIT FOR NEW FIXTURES.

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - NEW LIGHTING - AREA "B"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E23

P A R

L F

L O

O R

N KEY PLAN

NOT TO SCALE

P L A N

E W

H T

G A

R E A B

OS4

DEM

TO ADJACENT

FIXTURES

ELECTRICAL KEY NOTES

CONTRACTOR SHALL REUSE EXISTING CIRCUIT, REMAINING FROM

DEMOLITION.

FIXTURES SHALL BE CONTROLLED THROUGH INTEGRAL PHOTOCELL, AND

NEW BUILDING TIMECLOCK.

REINSTALLED LIGHT FIXTURE.

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - NEW LIGHTING - AREA "E"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E24

P A R

L F

L O

O R

N KEY PLAN

NOT TO SCALE

P L A N

E W

H T

G A

R E A

A E26

B E27

C E28

D E29

E E30

F E31

G E32

H E33

I E34

J E35K

E36

L E37

M E38

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

N COMPOSITE ELECTRICAL FLOOR PLAN - POWER

E25

C O

M P O

E E L E C

T R

A L F

L O

O R

P L A N

O W

E R

WASHER

GFI

WP WP

(E)

FACP

72"

AFF

DOOR OPERATOR

(TYP.)

72"

AFF

44"

AFF

GFI

44"

AFF

GFI

44"

AFF

GFI

44"

AFF

GFI

44"

AFF

44"

AFF

44"

AFF

42"

AFF

42"

AFF

42"

AFF

44"

AFF

44"

AFF

44"

AFF

44"

AFF

36"

AFF

44"

AFF

GFI

44"

AFF

GFI

44"

AFF

GFI

44"

AFF

GFI

EWC

44"

AFF

GFI

44"

AFF

GFI

44"

AFF

GFI

44"

AFF

44"

AFF

5 5

4 4

EWC

DRYER

WASHER

Q-45

Q-51

Q-47

Q-53

WASHER

Q-49

Q-41

DRYER

Q-39

44"

AFF

NEW

PNL "Q"

NEW

PNL "R"

NEW

PNL "P"

Q-23

Q-54

Q-21

Q-19

Q-17

Q-15

Q-13

Q-11

Q-7 Q-9

Q-5

Q-3

Q-1

Q-22

Q-8 Q-10

Q-18

Q-52

Q-28 Q-30 Q-32 Q-34 Q-36 Q-20

Q-29 Q-31

Q-33 Q-35

Q-37

Q-28 Q-48

Q-50

Q-25

Q-27

Q-26

Q-46 Q-42

Q-40

Q-44

Q-12

Q-16 Q-14

R-19

R-21

R-23 R-25

R-27

R-29

R-31

R-34 R-34R-32

R-32

R-22

R-24

R-26

R-28

R-30

CR 7

Q-38

44"

AFF

GFI

44"

AFF

GFI

72"

AFF

12 12

GFI

Q-43 Q-24

ELECTRICAL KEY NOTES

ALL DEVICES IN THIS SPACE SHALL BE GFI PROTECTED.

CONTRACTOR SHALL PROVIDE AND INSTALL RECESSED GRADE MOUNTED

FLOOR BOX. FLOOR BOX TO BE WIREMOLD #895 WITH 895DCC COVER PLATE.

POUR CONCRETE MUD MAT AROUND BOX, ALL SIDES WITH 15 MIL VAPOR

BARRIER. INSTALL (3) 1-1/4" CONDUIT AND WIRE TO EACH FLOOR BOX. TOTAL

BENDS NOT TO EXCEED 270°.

CONTRACTOR SHALL PROVIDE AND INSTALL PASS AND SEYMOUR

RECESSED T.V. BOX. PROVIDE POWER AND 2" CONDUIT TO BOX FROM LAY-IN

CEILING. PROVIDE BLOCKING IN WALL. PROVIDE 2" CONDUIT FROM FLOOR

BOX TO T.V. BOX. VERIFY HEIGHT WITH INTERIOR ELEVATIONS AND OWNER

PRIOR TO INSTALLATION.

CONTRACTOR TO PROVIDE 1" EMT CONDUIT WITH PULL STRING IN

ACCESSIBLE CEILING SPACE.

CONTRACTOR TO PROVIDE 2" EMT CONDUIT WITH PULL STRING IN

ACCESSIBLE CEILING SPACE.

CONTRACTOR TO PROVIDE 4" EMT CONDUIT WITH PULL STRING IN

ACCESSIBLE CEILING SPACE.

CONTRACTOR SHALL PROVIDE AND INSTALL 4-11/16" DEEP SQUARE BOX

WITH 1" CONDUIT WITH SINGLE GANG PLASTER RING FOR CARD READER

STUBBED TO NEAREST CIRCULATION CEILING OR CABLE TRAY. VERIFY

FINAL LOCATION WITH OWNER PRIOR TO ROUGH-IN.

ALL DATA SHALL TERMINATE TO THIS ROOM. CONTRACTOR SHALL PROVIDE

AND INSTALL 4' PAINTED PLYWOOD BACKER BOARD ON REAR WALL.

CONTRACTOR SHALL PROVIDE AND INSTALL LEGRAND DEQUORUM SERIES

DQFP15UST FLIP UP UNIT FOR POWER MODULE ON COUNTERTOP.

CONTRACTOR SHALL PROVIDE AND INSTALL POWER FOR OWNER PROVIDED

SIGNAGE. VERIFY LOCATION WITH OWNER, PRIOR TO ROUGH-IN.

CONTRACTOR SHALL PROVIDE AND INSTALL DEVICES IN MILLWORK, WITH

GROMMET TO DESK TOP.

VERIFY FINAL LOCATION AND REQUIREMENTS WITH FURNITURE SUPPLIER.

RECEPTACLES IN THIS ROOM SHALL BE CONTROLLED BY ROOM

OCCUPANCY SENSORS.

CONTRACTOR SHALL EXTEND CONDUIT AND WIRE TO NEW LOCATION.

EXTEND ASSOCIATED BRANCH CIRCUITS TO NEW PANEL.

CONTRACTOR SHALL REUSE EXISTING CONDUIT AND WIRE FOR NEW

EQUIPMENT.

CONTRACTOR SHALL REUSE EXISTING CONDUIT AND WIRE FOR NEW

EQUIPMENT. CONTRACTOR SHALL REMOVE PHASE WIRE FROM PANEL

CONNECTION, FOR USE ON 2-POLE UNIT.

REINSTALLED DEVICE.

REINSTALLED EQUIPMENT. CONTRACTOR SHALL TIE INTO LOCAL

OCCUPANCY SENSOR.

NEW EXHAUST FAN. CONTRACTOR SHALL TIE INTO LOCAL OCCUPANCY

SENSOR.

1. CONTRACTOR SHALL PROVIDE AND INSTALL 4-11/16" DEEP SQUARE BOX WITH 1" CND

AND SINGLE GANG PLASTER RING, STUBBED TO NEAREST CIRCULATION CEILING OR

CABLE TRAY FOR ALL DATA DEVICES.

GENERAL ELECTRICAL NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - NEW POWER - AREA "A"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E26

P A R

L F

L O

O R

P L A N

E W

P O

W E R

R E A A

RTU-2

208V-3Ø, 33.0A

RTU-3

208V-3Ø, 35.0A

RTU-4

208V-1Ø, 17.0A

CH-1

120V-1Ø, 17.5MCA

RTU-5

208V-3Ø, 35.0A

EF-3

120V-1Ø, 1/15HP

EF-2

120V-1Ø, 1/10HP

EF-1

120V-1Ø, 1/15HP

P-1,3,5

P-2,4,6

P-8,10,12

P-7,9

R-33

R-35

NEW PNL

"Q"

CU-1B

208V-1Ø, 15.1MCA

UV-1

120V-1Ø, 6.3MCA

CH-2

120V-1Ø, 17.5MCA

R-37

P-8

P-37,39

NEW PNL

"R"

WPWP

GFI

P-41

GFI

R-51

R-53

S-15

WH-1

120V-1Ø, 3.0A

P-33

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - NEW MECHANICAL - AREA "A"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E27

P A R

L F

L O

O R

P L A N

E W

M E C

H A N

A L A

R E A A

WASHER

(E)

72"

AFF

72"

AFF

44"

AFF

GFI

44"

AFF

GFI

44"

AFF

GFI

44"

AFF

GFI 44"

AFF

44"

AFF

44"

AFF

44"

AFF

36"

AFF

44"

AFF

GFI

44"

AFF

GFI

44"

AFF

GFI

44"

AFF

GFI

EWC

44"

AFF

GFI

44"

AFF

GFI

44"

AFF

GFI

44"

AFF

44"

AFF

5 5

4 4

EWC

DRYER

WASHER

Q-45

Q-51

Q-47

Q-53

WASHER

Q-49

Q-41

DRYER

Q-39

44"

AFF

NEW

PNL "P"

EXIST.

PNL "DP3"

Q-23

Q-54

Q-21

Q-19

Q-17

Q-15

Q-13

Q-11

Q-7 Q-9

Q-5

Q-3

Q-1

Q-22

Q-8 Q-10

Q-18

Q-52

Q-28 Q-30 Q-32 Q-34 Q-36

Q-29 Q-31

Q-33 Q-35

Q-37

Q-28 Q-48

Q-50

Q-25

Q-27

Q-26

Q-46 Q-42

Q-40

Q-44

Q-12

Q-16 Q-14

R-34

EXISTING PNL "N"

DOOR OPERATOR

(TYP.)10

CR 7

Q-38

P-10

P-12

P-14

P-16

P-18 P-20

P-22 P-24

P-15 P-17

P-26 P-28

P-21 P-25

44"

AFF

GFI

44"

AFF

GFI

72"

AFF

GFI

Q-43

RTU-1

208V-1Ø, 17.0A

FC-1

208V-1Ø, 1.0A

N-39,41

FED FROM HP-1

CU-3B

208V-1Ø, 17.5MCA

CU-2B

208V-1Ø, 15.1MCA

CU-1B

208V-1Ø, 15.1MCA

UV-2

120V-1Ø, 6.3MCA

UV-1

120V-1Ø, 6.3MCA

UV-3

120V-1Ø, 6.3MCA

HP-1

208V-1Ø, 12.0A

N-12

N-38,40

P-6 P-8

P-34,36 P-37,39

WP WP

P-30,32

GFI

P-41

N-35

GFI

N-42

EF-4

120V-1Ø, 1/15HP

ELECTRICAL KEY NOTES

ALL DEVICES IN THIS SPACE SHALL BE GFI PROTECTED.

CONTRACTOR SHALL PROVIDE AND INSTALL RECESSED GRADE MOUNTED

FLOOR BOX. FLOOR BOX TO BE WIREMOLD #895 WITH 895DCC COVER PLATE.

POUR CONCRETE MUD MAT AROUND BOX, ALL SIDES WITH 15 MIL VAPOR

BARRIER. INSTALL (3) 1-1/4" CONDUIT AND WIRE TO EACH FLOOR BOX. TOTAL

BENDS NOT TO EXCEED 270°.

CONTRACTOR SHALL PROVIDE AND INSTALL PASS AND SEYMOUR

RECESSED T.V. BOX. PROVIDE POWER AND 2" CONDUIT TO BOX FROM LAY-IN

CEILING. PROVIDE BLOCKING IN WALL. PROVIDE 2" CONDUIT FROM FLOOR

BOX TO T.V. BOX. VERIFY HEIGHT WITH INTERIOR ELEVATIONS AND OWNER

PRIOR TO INSTALLATION.

CONTRACTOR TO PROVIDE 1" EMT CONDUIT WITH PULL STRING IN

ACCESSIBLE CEILING SPACE.

CONTRACTOR TO PROVIDE 2" EMT CONDUIT WITH PULL STRING IN

ACCESSIBLE CEILING SPACE.

CONTRACTOR TO PROVIDE 4" EMT CONDUIT WITH PULL STRING IN

ACCESSIBLE CEILING SPACE.

CONTRACTOR SHALL PROVIDE AND INSTALL 4-11/16" DEEP SQUARE BOX

WITH 1" CONDUIT WITH SINGLE GANG PLASTER RING FOR CARD READER

STUBBED TO NEAREST CIRCULATION CEILING OR CABLE TRAY. VERIFY

FINAL LOCATION WITH OWNER PRIOR TO ROUGH-IN.

ALL DATA SHALL TERMINATE TO THIS ROOM. CONTRACTOR SHALL PROVIDE

AND INSTALL 4' PAINTED PLYWOOD BACKER BOARD ON REAR WALL.

CONTRACTOR SHALL PROVIDE AND INSTALL LEGRAND DEQUORUM SERIES

DQFP15UST FLIP UP UNIT FOR POWER MODULE ON COUNTERTOP.

CONTRACTOR SHALL PROVIDE AND INSTALL POWER FOR OWNER PROVIDED

SIGNAGE. VERIFY LOCATION WITH OWNER, PRIOR TO ROUGH-IN.

CONTRACTOR SHALL PROVIDE AND INSTALL DEVICES IN MILLWORK, WITH

GROMMET TO DESK TOP.

VERIFY FINAL LOCATION AND REQUIREMENTS WITH FURNITURE SUPPLIER.

RECEPTACLES IN THIS ROOM SHALL BE CONTROLLED BY ROOM

OCCUPANCY SENSORS.

CONTRACTOR SHALL EXTEND CONDUIT AND WIRE TO NEW LOCATION.

EXTEND ASSOCIATED BRANCH CIRCUITS TO NEW PANEL.

CONTRACTOR SHALL REUSE EXISTING CONDUIT AND WIRE FOR NEW

EQUIPMENT.

CONTRACTOR SHALL REUSE EXISTING CONDUIT AND WIRE FOR NEW

EQUIPMENT. CONTRACTOR SHALL REMOVE PHASE WIRE FROM PANEL

CONNECTION, FOR USE ON 2-POLE UNIT.

REINSTALLED DEVICE.

REINSTALLED EQUIPMENT. CONTRACTOR SHALL TIE INTO LOCAL

OCCUPANCY SENSOR.

NEW EXHAUST FAN. CONTRACTOR SHALL TIE INTO LOCAL OCCUPANCY

SENSOR.

1. CONTRACTOR SHALL PROVIDE AND INSTALL 4-11/16" DEEP SQUARE BOX WITH 1" CND

AND SINGLE GANG PLASTER RING, STUBBED TO NEAREST CIRCULATION CEILING OR

CABLE TRAY FOR ALL DATA DEVICES.

GENERAL ELECTRICAL NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - NEW POWER - AREA "B"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E28

P A R

L F

L O

O R

N KEY PLAN

NOT TO SCALE

P L A N

E W

P O

W E R

R E A B

FC-1

208V-1Ø, 1.0A

N-39,41

FED FROM HP-1

CU-5B

208V-1Ø, 15.1MCA

CU-4B

208V-1Ø, 17.5MCA

CU-3B

208V-1Ø, 17.5MCA

UV-3

120V-1Ø, 6.3MCA

UV-4

120V-1Ø, 6.3MCA

UV-5

120V-1Ø, 6.3MCA

UV-6

120V-1Ø, 6.3MCA

UV-7

120V-1Ø, 6.3MCA

CU-7B

208V-1Ø, 15.1MCA

CU-6B

208V-1Ø, 15.1MCA

HP-1

208V-1Ø, 12.0A

N-12

N-14

N-16

N-31,33

N-32,34

A-8

A-16

A-38,40

A-32,34

EXIST. PNL

"DP3"

EXIST. PNL

"N"

EXIST. PNL

"A"

GFI

N-35

GFI

N-42

GFI

N-36

GFI

A-42

A-36

ELECTRICAL KEY NOTES

RELOCATED EQUIPMENT. CONTRACTOR SHALL EXTEND ASSOCIATED

BRANCH CIRCUIT CONDUIT AND WIRE TO NEW LOCATION.

CONTRACTOR SHALL PROVIDE AND INSTALL POWER FOR OWNER PROVIDED

SIGNAGE. VERIFY LOCATION WITH OWNER, PRIOR TO ROUGH-IN.

CONTRACTOR SHALL REUSE EXISTING CONDUIT AND WIRE FOR NEW

EQUIPMENT.

CONTRACTOR SHALL REUSE EXISTING CONDUIT AND WIRE FOR NEW

EQUIPMENT. CONTRACTOR SHALL REMOVE PHASE WIRE FROM PANEL

CONNECTION, FOR USE ON 2-POLE UNIT.

CONTRACTOR SHALL PROVIDE AND INSTALL NEW CONDUIT AND WIRE FOR

NEW EQUIPMENT.

EXHAUST FAN SHALL BE CONTROLLED BY NEW TIMECLOCK. CONFIRM TIME

SCHEDULING WITH OWNER.

REMOVE EXISTING PNEUMATIC INTERLOCK WITHIN STARTER, AND CONNECT

TO NEW CONTROL PANEL FOR CONTROLS.

CONTRACTOR SHALL PROVIDE CIRCUIT TO TRANSFORMER, FOR CONTROL

VALVE POWER.

1. CONTRACTOR SHALL PROVIDE AND INSTALL 4-11/16" DEEP SQUARE BOX WITH 1" CND

AND SINGLE GANG PLASTER RING, STUBBED TO NEAREST CIRCULATION CEILING OR

CABLE TRAY FOR ALL DATA DEVICES.

GENERAL ELECTRICAL NOTES

SCALE: 1/8" = 1'-0"

0 1 5 10 20

N PARTIAL FLOOR PLAN - NEW POWER - AREA "C"

J C

T O

R R

A N

T C

E N

T E R

A D

R E N

O V A T

N S

M A

T R

I X

E29

P A R

L F

L O

O R

N KEY PLAN

NOT TO SCALE

P L A N

E W

P O

W E R

R E A C

File details come from the government source that posted it. Updated May 12, 2026.