ADDENDUM 2.pdf
PDF 140 KB Posted
- Attached to
- Project Access York - Pedestrian/Bicycle Paths
- Solicitation number
- DPS-93(15)
- Issued by
- Webster County, Nebraska
About this file
This Addendum No. 2 document issued by the State of Nebraska Department of Transportation modifies the Special Provisions for Project No. DPS-93(15), a pedestrian bridge component of the Project Access York initiative scheduled for letting on October 1, 2026. The addendum supersedes subsection 1.3 Qualified Fabricators in the Pedestrian Bridge provision by establishing a list of pre-approved fabricators and outlining the qualification requirements for alternative fabricators. The pre-approved fabricators include Contech Engineering Solutions, Wheeler, Excel Bridge Manufacturing Company, Bridge Brothers Inc., TrueNorth Steel, and Anderson Bridges. Contractors proposing fabricators not on the pre-approved list must submit detailed documentation to Jacob Delone at jdelone@olsson.com or Brandon Roesler at broesler@olsson.com at least 10 days prior to bid for engineer evaluation and approval, with final approval required five days before bid submission.
Non-pre-approved fabricator submittals must include product literature, representative design calculations and drawings, splicing and erection procedures, warranty information, inspection and maintenance procedures, AISC Shop Certification, AWS Certified Fabricator Certification, and welder qualifications. Proposed fabricators must demonstrate a minimum of five successful bridge projects of similar construction that have been in service for at least three years, with documented location, bridge size, owner contact information, and project references. All fabricator submittals must be made through the contractor; direct submissions from fabricators will not be accepted. The engineer's evaluation and determination regarding compliance with qualifying criteria is final.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 410-DPS-93(15) (2).pdf | ||
| ADDENDUM 1.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATE OF NEBRASKA
DEPARTMENT OF TRANSPORTATION
ADDENDUM NO. 2
PROJECT NO. DPS-93(15)
CONTROL NO. 43010
CALL NO. 410
PROJECT ACCESS YORK
LETTING DATE: OCTOBER 1, 2026
On pages 172 and 173 of the Special Provisions, subsection 1.3 Qualified Fabricators in section 1.0 GENERAL in the provision titled PEDESTRIAN BRIDGE is void and superseded by the following:
1.3 Qualified Fabricators
Pre-approved FABRICATORs:
Contech Engineering Solutions 8301 State Highway 29 North Alexandria, Minnesota 56308 800-328-2047
Wheeler 9531 West 78th Street, Ste.100 Minneapolis, MN 55344 952-929-7854
Excel Bridge Manufacturing Company 12001 Shoemaker Avenue Santa Fe Springs, California 90670 562-944-0701
Bridge Brothers, Inc.
225 Pumpkintown Hwy Building 19th Pickens, South Carolina 29671 888-779-1513
TrueNorth Steel 702 13th Ave E West Fargo, ND 58078 1-866-982-9511
Anderson Bridges 111 Willow Street Colfax, WI 54730 1-877-934-2800
Project No. DPS-93(15) Addendum No. 2
FABRICATORS other than those listed above may be used provided the Engineer or owner's agent evaluates the proposed FABRICATOR and approves the FABRICATOR 5 days prior to bid. All FABRICATOR submittals must be made through the CONTRACTOR. No submittals made directly by a FABRICATOR will be considered. Submittals shall be sent to:
Jacob Delone at jdelone@olsson.com Brandon Roesler at broesler@olsson.com
The Contractor must provide the following documentation, for any proposed FABRICATOR who is not pre-approved, at least 10 days prior to bid:
Product Literature
All documentation to ensure the proposed substitution will be in compliance with these specifications. This shall include:
o Representative design calculations o Representative drawings
Splicing and erection procedures (if required by bridge length or shipping limitations) o Warranty information o Inspection and Maintenance procedures o AISC Shop Certification o AWS Certified Fabricator Certification o Welder Qualifications o designing and fabricating these type structures and a minimum of five (5) successful bridge projects, of similar construction, each of which has been in service at least three (3) years. List the location, bridge size, owner, and a contact for reference for each project.
The ENGINEER will evaluate and verify the accuracy of the submittal prior to bid.
If the ENGINEER determines that the qualifying criteria have not been met, the ruling shall be final.
Project No. DPS-93(15) Addendum No. 2
DEPARTMENT OF TRANSPORTATION
Devin Townsend, P.E.
Construction Engineer
Issued:
DT: 410AD210
NOTICE: Only the Contractors issued bidding proposals receive this addendum and responsibility for notifying any potential Subcontractors or Suppliers remains with the Contractor.
File details come from the government source that posted it. Updated .