Addendum 2 19156.pdf

DTMB-0414 (Rev 12/17)

DEPARTMENT OF TECHNOLOGY, MANAGEMENT AND BUDGET

State Facilities Administration Design and Construction Division

CONSTRUCTION BID ADDENDUM NO. 2

This form identifies an Addendum to Bidding Documents, and incorporates interpretations or clarifications, modifications, acceptance of proposed “or equal” materials, and other information into the Bidding Documents. Addenda will be numbered by the Professional and distributed through www.michigan.gov/SIGMAVSS as an attachment.

TO:

ALL BIDDERS

DATE ISSUED

7/1/2022

PROJECT NAME

Straits State Park – Toilet Shower Buildings

FILE NUMBER

19156.TAP

PROFESSIONAL

NFE Engineers

PROJECT DIRECTOR

Tom Pawlowski

BID OPENING DATE:

7/6/2022

ADDENDUM ITEMS: (attach additional sheets and drawings if required)

1. See attached architectural updates and write up.

ACKNOWLEDGEMENT: This Addendum must be acknowledged by the Bidder in the space provided in the Bid Summary and Bid Form. Failing to acknowledge Addenda may be cause for the Bid to be rejected. Addenda will become part of the Contract Documents.

Steve Sutton

PROFESSIONAL: DATE: 7/1/2022

APPROVED BY:

PROJECT DIRECTOR: Tom Pawlowski DATE: 7/1/2022

Addendum

Please review this Addendum promptly. If any information included here is in error, please contact TDG Architects immediately.

Created by bgill 1 of 2 Created on 6/21/2022 7:47:00 PM

X:\Active\19-947 Nowak and Fraus - Straits State Park_Toilet Shower

Building\Submitals\Bids\Addendum\Adden No. 2\Straits SP ADDENDUM No.

1.doc

7 9 O a k l a n d A v e n u e

Po n t i a c , M I 4 8 3 4 2

T . ( 2 4 8 ) 8 7 4 -1 4 2 0

F . ( 2 4 8 ) 7 5 8 -9 9 2 6

T D GA r ch i t e c t s . co m

Date: July 1, 2022

TDG Project Name: Straits State Park – Shower Buildings

TDG Project #: 19-947

Contractor: TBD

Addendum Number: Addendum #2

INTENT

This Addendum is issued for modification before the award of Contract due to a Requested Change. Except as otherwise specified hereinafter, and/or shown on the accompanying Drawings, all work shall be in accordance with the Contract

Documents for this Project and the Addenda(s) and approved Bulletins issues subsequent thereto.

DRAWING REVISIONS

Item No. 1: Refer to Sheet A101W (Issued)

1. Door for women’s and men’s lavatory moved 8” see drawings.

Item No. 2: Refer to Sheet A101E (Issued)

Item No. 3: Refer to Sheet A301W (Issued)

Item No. 4: Refer to Sheet A301E (Issued)

Item No. 5: Refer to Sheet A401 (Issued)

Created by bgill 2 of 2 Created on 6/21/2022 7:47:00 PM

X:\Active\19-947 Nowak and Fraus - Straits State Park_Toilet Shower

Building\Submitals\Bids\Addendum\Adden No. 2\Straits SP ADDENDUM No.

1.doc

Item No. 6: Refer to Sheet A501W (Issued)

Item No. 7: Refer to Sheet A501E (Issued)

Item No. 8: Refer to Sheet A601W (Issued)

Item No. 9: Refer to Sheet A601E (Issued)

Item No. 10: Refer to Sheet S101W (Issued)

1. Door for women’s and men’s lavatory moved 8” see drawings.

Item No. 11: Refer to Sheet S101E (Issued)

1. Door for women’s and men’s lavatory moved 8” see drawings.

Item No. 12: Refer to Sheet S201 (Issued)

1. Clarification of 1/2” and 1/4" floor control joints. 1/4” Control joints interior and 1/2” Control joints exterior.

Item No. 13: Refer to Sheet S301 (Issued)

1. Detail 2: block flashing relocated to first course above grade.

Item No. 14: Refer to Sheet M102 (West and East) (Issued)

1. HB-2 added to schedule see drawings and attached cut sheet.

Item No. 15: Substitution Requests

1. Centrotherm - No.

2. Plumbing fixtures – Zurn toilets, flush valves, urinals, service sink, mop sink and faucets may be approved by park but will need to be review at time of shop drawing review. No substitutions for shower units.

3. Special-lite aluminum doors is an approved substitution.

4. Hand Dryers – No substitutions

End of Addendum

,-./01/234-5,-67851/7759:;<8.=

>?@ABCD@EFGHIBJ�KK�BLHMNNOBPGEHQEGB

RST4UU8V</:7

RS,-./01/234-

RSWXYZ[\]Ŝ_̀YZSaXbc̀

RSd2./4-:75efgV:-.5h4i

7/< ./4 j"���"�

&'( 'k�� ���"��l�*�� �mn����nn�o p)���� �������m����o*�� ����qp����� ���"��l�*��r )s" tuvwxyzx{w|}~|zwxu��zx��u��w���w}�zw�u�w����zx�w�uw��zz����w�z��z�}���z��w����x}~w����}~~}��u��w��x~��zwu���uu�w xu��zx��u��w��w��~�wx~��}�z�wu�w}��w���uu�w����}~~}��u�w�u�w�z���z���}~�wxu��z�x�}~�w���������u�}~w}��w��������}~w }��~�x}��u���w�yzwyz}|�w�}��z��w�z����wv��yw�u~��w��}��w��z�w}����z�w�z}��wu�w�z~�}�~zw�z�|�xzwv��yw�����}~w �}���z�}�xz�w�yzw�}�xz��w}~�uwy}|zw}w�uv�z�wxu}�z�w�u���z��u��w�z�}~wy}��~zwu�wu�z�}����w{z�wu�w~uu�zw{z�w |}��~}��uu�w��~~w�}�xz���w��wu���u�}~w|}~|zw�u�w��w}|}�~}�~zw��wz��yz�w�}���w��x{z~wu�w��}��w����y�

�w �z}|�w�}��z��wx}��w��}��wxu�����x��u�wv��yw�u~��wx}��w��}��w�u������wt}��zwv��ywz�x~u�z�w�x�zvwyu~z� �w ����u�}~wyz}|�w�}��z��z�wx}��z�w��}��w|}~|zw�u�w��w�}���w��x{z~wu�w��}��w����y �w �}���w��x{z~w�~}�z�wu�w�u~��yz�wxy�u�zw�u�� �w �uv�z�wxu}�z�w�u���z��u��w�z�}~wy}��~zwu�wu�z�}����w{z�wu�w~uu�zw{z�w|}��}~��uu�w��~~w�}�xz�� �w �� ��n��������n��� ��n���)��� �w ��~~wx��x~zw����w�y�z}��wu�w��z�w}��z��~�wv��yw��}��}��w�� ¡w¢w���zw�z}�wv}�yz� �w ¢ux{w�y�z~�wx}� �w ��£w�ztu�wv��yw��}�y��zw�}x{��� �w ��¤¤¥w|}x���w��z}{z�w�}x{tuvwxyzx{w|}~|zw}���u|z�w���z�w����w�¤��

V8 d Vg V/-

¦DFIEB§?IIB̈HNME@B©DIª ©«@?¬DHIBª®GHD@BP¬̄

j"���°&%�� ±-78.51/²8 ³́0wµ¡ ¶³05·¡9/-/=3

0̧�¹ ��n� º0w¢uu�zw»z� ¼0�¹ ��n��½�� wwww¢uu�zw»z� d28V:.4V ¾¿0�� ����°�)s�n�&n T¿0�&*n������j��*+��&n ���À

³0w���wÁ�~z� ¶0w�Â�wÁ�~z�

±-78.5Ãf28

ÄÅÆÇÈÉÊËÅÆÌÈÉËÍÎÏËÅÆÐÈÉËÎÑÒËÍÓÍÔÕÍÖÕ×

ØÙÚØÛÜÝÙÞßàáØâßãÜäàØåÚÙÞß j"���æç�

0̧�� ����°�)s�n�&n º05'*pm��æ� h4i59/-/=3

����� ����� ������

��é�� êJë즧ìBí©îìïBÅÆÇÈÉÊËÅÆÌÈÉËÍÎÏËÅÆÐÈÉËðÍÏ×ËñÑòËóôËÑòËõôËö÷×ÍÒË øÑÎÎ×øÒÔÑÎöË÷ÔÒùËúËÅÑûû×òËÑÎÕüý

� '()*+,-(./0 )123� �4���&���"��5"�6�!�,7��

� '()*2,-(./+ 8"9&���"9&��:!�;�,7�� ���<�79<��=":><�!�&�?!��9#

8"9&���"9&��:!�;�,7��

@ABCDEFGHIJFKBLGIACMNGHIOCPLDQPLR

S �������T UMCVGIWNGLIJMXI@YDZ[GCIACMNGHR

�������� UMCVGIWNGLIJMXI@ABCDEFGHIJFKBLGIACMNGHR

\ '()*2,-(./* �����]":̂79_�,7�

` �a������ ]":̂79_�b9�� c '()/.,-(./. =%%���,���%9�="9�"!&

T �������\ deNGQHGHIUMCVGIWNGLIJMXI@YDZ[GCIACMNGHR

�������a deNGQHGHIUMCVGIWNGLIJMXI

@ABCDEFGHIJFKBLGIACMNGHR

a '(2*2,-(f/g h":<<�� !�"̂�!�$�i�":���9��,7�

'()*2,-(./2 =%%���,���'%94�!�7%9�,7�j�'%9�"79�k�+j�lj�.

mn o p q r s t

S\�\IdMENI��aNFIWNKGGN uKMQHVDGvwIxyIÌS��� @T��RI�̀��a�\\ zMeI@T��RI�̀���S̀� vvv{A|}d|{ZBL

DV

Dick V.

InnoFlue Polypropylene vs. Stainless Steel/PVC/CPVC Flue for Condensing Boilers / Water Heaters

Material Max Operating Temperature

PVC 149°F

CPVC 194°F

InnoFlue® PP 230°F

Steel 550°F

There are several options when it comes to the venting of high efficiency gas-burning appliances.

Selecting the right venting material is the key component to a safe and trouble-free installation.

Some of the most common venting materials are: InnoFlue polypropylene, stainless steel, and PVC/ CPVC. InnoFlue polypropylene has many advantages and has quickly become the preferred choice for venting high efficiency gas-burning appliances. This paper will review the advantages of InnofFlue polypropylene and compare it against stainless steel and PVC/CPVC.

As a sign of commitment to safety, InnoFlue polypropylene is listed to UL-1738 & ULC-S636, the venting standards for gas-burning appliances in the US and Canada. These safety standards ensure the vent will be able to withstand the rigorous demands of today’s appliances.

InnoFlue polypropylene has a high temperature threshold and can sustain consistent exhaust temperatures of up to 230°F. The table shows how it compares to stainless steel and PVC/CPVC.

With exhaust temperatures for typical high efficiency gas-burning appliances being under 230°F, stainless steel’s high operating temperature range is often more than is required for the application.

Most brands of PVC & CPVC are not listed to UL-1738 or ULC-S636 and yield lower maximum operating temperatures. This requires special consideration to ensure the appliance will not operate outside these limits.

InnoFlue polypropylene has a high thermal expansion rate when compared to stainless steel and PVC/CPVC. InnoFlue is engineered to allow for expansion and contraction. Its long sockets and EPDM gaskets allow the vent to expand and contract while maintaining the integrity of the system. The high thermal expansion properties are advantageous for keeping ice from building up on exposed surfaces.

In comparison, PVC/CPVC joints are glued together and have no provisions for expansion and contraction. This could result in separated joints and or stress cracking, a serious safety concern.

The graph at right shows the thermal expansion of an InnoFlue 100' polypropylene vent system.

InnoFlue gaskets are manufactured from a specialty EPDM material that has been specifically engineered for flue gas systems. These gaskets are highly resistant to flue gas composition and acidic condensate.

Glues, primers, solvents, caulks, silicone or any other chemicals are never required on InnoFlue installations.

InnoFlue polypropylene has a comprehensive product offering with diameters up to 12”, 10’ vent lengths, flexible pipe, and elbows that have been engineered to include pitch. This results in fewer joints, fewer system components, superior condensate management, and an overall shorter installation time. PVC/CPVC are offered in 10’ lengths. Stainless steel is typically available in 3’ lengths, creating more potential leak areas and increased installation time.

InnoFlue is rated for zero clearance to combustibles in all applications.

This allows for greater flexibility during the install. Typical components like; roof jacks and wall thimbles that are required for stainless steel venting are not required with InnoFlue. Clearance to combustibles on stainless steel product varies with different exhaust temperatures and as it not listed for use with gas burning appliances PVC/CPVC do not carry a clearance to combustibles rating. The chart below outlines typical stainless steel clearance to combustibles requirements for both single wall and double wall applications.

Diameter Weight per Foot (lbs)

PVC

(Sched. 40)

CVPC

(Sched. 80) Stainless

Steel InnoFlue

PolypropyleneInches mm

6 160 3.53 5.82 .94 .98

8 200 5.39 8.83 1.51 1.53

10 250 7.55 13.09 1.88 1.95

12 315 10.01 18.00 2.26 3.82

InnoFlue polypropylene has a significant weight advantage over

PVC/CPVC.

As shown in the adjacent chart, InnoFlue polypropylene is up to three time lighter than Sched. 40 PVC and CPVC and up to six times lighter than Sched. 80 PVC and CPVC.

InnoFlue polypropylene has decades of consistent proven in-field success and is the technological leader of special gas vent.

See comparison sheet for a side by side look at the differences between InnoFlue polypropylene, stainless steel, and PVC/CPVC.

Stainless Steel - Clearance to Combustibles

Operation Temp:

300°F

Clearance Enclosed Clearance Unenclosed Horizontal Vertical Horizontal Vertical

Single Wall (SS) Non-Combustible Enclosure 3” (76.2 mm) 3” (76.2 mm)

Double Wall (SS) 3” (76.2 mm) 1” (25.4 mm) 1” (25.4 mm) 1” (25.4 mm)

InnoFlue Polypropylene Stainless Steel PVC / CPVC

Performance & Safety

• UL-1738 & ULC-S636 tested/ listed by Intertek

• Engineered for flue gas

• Engineered for condensate management

• Decades of successful installations globally

• Low thermal expansion

• Suspectible to stress cracking & corrosion

• Designed for positive pressure

• High surface temp

• Minimal safety factors

• No provision for thermal expansion

• Suspectible to stress cracking

• UV degradation

• Toxic solvents/glues required

• Not rated for flue gas

Temperature Limitations & Concerns

• Max temp 230°F

• Appropriately rated for high-efficiency appliances

• Zero clearance to combustibles

• Max temp 600°F

• Double-wall required to reduce clearance to combustibles and surface temperatures

• Low operating temps

• Plastics soften, sag, and fail

• Not rated for gas-fired appliances

Technical Support

• Full team of engineers and sales representatives

• Design/Layout Support

• 3D Layout rendering

• Custom components

• Full team of engineers and sales representatives

• Design/Layout Support

• 3D Layout rendering

• Custom components

• No technical support available

Installation

• Gasket system installs quickly

• Wide range of components allow for customized installations

• 87° elbows account for pitch

• No cure time

• Laser welded seams

• Internal Gaskets

• No cure time

• Very heavy

• Significant field work requirements

• No instructions

• Long cure time

Codes/Tests/ Standards

• UL-1738 & ULC-S636 tested/ listed by Intertek

• Tested to CE EN 14471 by TUV

• Tested to UL-1738 &

ULC-S636

• Performance concerns throughout system

• Manufacturers state “not for flue gas”

Application Versatility

• Complete product offer

• Single Wall, Flex, Concentric

• 2” - 12” diameters

• Comprehensive OEM approvals

• Thermal expasion rates protect system integrity

• Limted versatility due to shorter lengths and clearance to combustibles

• Difficult to adjust components in the field

• Limited application due to product offer and temperature limtiations

• Not designed or endorsed by PVC/ CPVC manufacturers for venting flue gas

Eco-Friendly • Fully Recyclable

• LEED Friendly • Recyclable • Manufactured with chlorides

• Partially recyclable

Warranty • 10 Year Warranty • Warrantied • No warranty http://centrotherm.us.com info@centrotherm.us.com

518.434.3400

Z5665-BWL1

TAG ____________HET Elongated, ADA Height, Floor Mounted

EcoVantage® Flush Valve Toilet

US 1.855.ONE.ZURN CANADA 1.905.405.8272 ZURN.COM

ZURN INDUSTRIES, LLC 511 W. Freshwater Way, Milwaukee, WI U.S.A. 53204 · Ph. 1-855-ONE-ZURN, Fax 919-775-3541 In Canada: ZURN INDUSTRIES LIMITED 7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, Ph. 905-405-8272, Fax 905-405-1292

Rev. C Date: 02/23/21 C.N. No. 142489 Prod. | Dwg. No. SS Z5665-BWL1

Meets the American Disabilities Guidelines and ANSI A117.1 requirements when installed according to these requirements.

Fixture dimensions meet ASME A112.19.2/CSA B45.1 requirements.

In Canada - Consult local codes and standards.

Product Features:

• Shipping Weight: 55 lbs.

Architectural/Engineering Approval

Z5955SS-EL

Z5972-COMB

Closet bolt & wax ring kit.

Recommended Trim:

Options:

• ADA Compliant

• WaterSense Compliant volume to ensure that the entire system meets the

Z5665-BWL1

TAG ____________HET Elongated, ADA Height, Floor Mounted

EcoVantage® Flush Valve Toilet

US 1.855.ONE.ZURN CANADA 1.905.405.8272 ZURN.COM

ZURN INDUSTRIES, LLC 511 W. Freshwater Way, Milwaukee, WI U.S.A. 53204 · Ph. 1-855-ONE-ZURN, Fax 919-775-3541 In Canada: ZURN INDUSTRIES LIMITED 7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, Ph. 905-405-8272, Fax 905-405-1292

Rev. C Date: 02/23/21 C.N. No. 142489 Prod. | Dwg. No. SS Z5665-BWL1

Meets the American Disabilities Guidelines and ANSI A117.1 requirements when installed according to these requirements.

Fixture dimensions meet ASME A112.19.2/CSA B45.1 requirements.

In Canada - Consult local codes and standards.

Z5665-BWL1 with top spud Z5666-BWL1 with top spud and bedpan lugs

1 [25]

I.P.S. SUPPLY

4±1

[121±13]

FINISHED FLOOR

FINISHED WALL

ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC 27330 Phone: 1-800-997-3876 Fax: 919-775-3541 World Wide Web: www.zurn.com

In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905-405-8272 Fax: 905-405-1292

AquaFlush® is a registered trademark of Zurn Industries, LLC.

Exposed ZEMS6000PL-IS Model Hardwired Automatic Sensor Flush Valve

For Water Closets

Suffix Options (Check/Specify Appropriate Options) _____ -YJ Split Ring Pipe Support _____ -YK Solid Ring Pipe Support _____ -YO Bumper on Angle Stop _____ Other

This space is for Architectural/engineering Approval

Flow Options -WS1 1.6 Gal. Low Consumption -FF 4.5 Gal. Full Flush Standard Flush 3.5 Gallons Per Flush

Rev. A Date: 10/27/08 Dwg. No. 200021 Product No. ZEMS6000PL-IS

ENGINEERING SPECIFICATION: ZURN ZEMS6000PL-IS

AquaFlush Exposed Hardwired Automatic Sensor Flush Valve For Water Closets- Exposed, quiet diaphragm-type, chrome plated, flushometer valve with a polished exterior. Complete with a chloram-ine resistant, dual seal diaphragm with a clog resistant by-pass. The valve incorporates a 6 VDC motorized actuator, an integral infrared convergence-type proximity sensor and a manual push-button over-ride into an all-metal, polished chrome plated housing. Sensor range automatically adjusts to its environment at power up and is powered by a 6 VDC power converter. Each power converter can accomodate up to eight flush valves. The valve is complete with high back pres-sure vacuum breaker, one piece hex coupling nut, adjustable tail-piece, spud coupling and flange for top spud connection. Control stop has internal siphon-guard protection. The AquaFlush® Plus is also furnished with a sweat solder kit, vandal resistant stop cap, and cast wall flange with set screw. Internal seals are made of chloram-ine resistant materials.

AquaSense® Model

TAG

Accessories (Order seperate as specified) P6000-PC6 6VDC Plug-in Power Converter

(Up to 8 valves) P6000-MJ Mini Junction Box P6000-HW6 Hardwire Power Converter

(Up to 8 valves) a Jones Stephens Brand where quality and comfort meet™

3249 Moody Parkway • Moody, AL 35004 • Phone: 877-456-SEAT(7328) • Fax: 800-462-6991 www.comforttoiletseats.com

Seat shall be Comfort™ Seats

Model Number C106CAMFR

C106SSCAMFR

Commercial Deluxe Plastic Toilet Seat Elongated Open Front Less Cover

Category

COMMERCIAL

Features

• Contains fi re retardant to meet 94VO fl ammability rating

• Injection molded durable polypropylene plastic with UV protection

• External check hinge stops at 11 degrees beyond vertical

• Contains Anti-microbial ingredient

• Ergonomical comfort curve seat design

• 304 stainless steel hinge post and hardware

• Built in bumpers

• Anti-skid rubberized bushing

• Hinges are hidden by seat - no pinching

• C106SSCAMFR - External self-sustaining hinge holds at 11 degrees before and beyond vertical

Seat Color/Finish Specify white

Hinge Color/Finish Specify white

Product Specifi cations Hinge Design: C106CAMFR - External check hinge with 304 series stainless steel hardware C106SSCAMFR - External self-sustaining check hinge with 304 series stainless steel hardware

Ring Thickness: 7/8” Ring Thickness with Bumper: 1” Height of Seat with Cover: N/A Size: ANSI Standard Toilet - Meets Z124.5 Section 5.1.2

Additional Information All seats feature UV protection.

Available on C106SSCAMFR Self-Sustaining Check Hinge - External self-sustaining check hinge seat in any raised posi-tion up to 11 degrees beyond vertical

Check Hinge - External check hinge with 304 series stainless steel hinge posts stops seat 11 degrees beyond vertical

Z5755-U Omni-FloTM Top Spud Urinal

0.125 gpf to 1.0 gpf

TAG

Rev. E Date: 4/18/2017 Dwg. No. 312163 Product No. Z5755-U

EcoVantage® is a registered trademark of Zurn Industries, LLC.

Meets the American Disabilities Guidelines and ANSI A117.1 requirements when urinal is installed 432mm (17”) from finished floor.

These dimensions and specifications are subject to change without notice.

Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/ CSA B45 requirements.

ZURN INDUSTRIES, LLC. ♦ COMMERCIAL BRASS OPERATION

5900 ELWIN BUCHANAN DRIVE ♦ SANFORD NC 27330

PHONE: 1-800-997-3876 ♦ FAX: 919-775-3541

WWW.ZURN.COM

IN CANADA: ZURN INDUSTRIES LIMITED

7900 GOREWAY DRIVE UNIT 10 ♦ BRAMPTON, ONTARIO L6T5W6

PHONE: 905-405-8272 FAX: 905-405-1292

See Zurn One Systems for suggested packages.

Engineering Specification:

Z5755 EcoVantage® Urinal

0.125 gpf [0.5 Lpf] to 1.0 gpf [3.8 Lpf] vitreous china, wall hung, integral trap, washdown urinal complete with 3/4” top spud connection, con-cealed universal retrofit wall bracket, 2” outlet connection and vandal resistant outlet strainer.

Recommended Trim:

ZTR6203-ULF-LL*

Sensor Long Life Battery Operated Urinal Flush Valve. 0.125 gpf[0.5 Lpf]

ZTR6203-QRT-LL*

Sensor Long Life Battery Operated Urinal

Flush Valve. 0.25 gpf[1.0 Lpf]

ZTR6203-EWS-LL*

Sensor Long Life Battery Operated Urinal Flush Valve. 0.5 gpf [1.9 Lpf]

ZTR6203-WS1-LL

Sensor Long Life Battery Operated Urinal

Flush Valve. 1.0 gpf [3.8 Lpf]

Z5755 Urinal Series

The information contained in this document is subject to change without notice.

Please contact Zurn for most up to date information.

• Zurn Ultra Low Consumption Urinal designed for optimal performance when paired with Zurn flush valve to save water while exceeding industry perfor-mance standards

• Based on flush valve it can flush 0.125 gpf [0.5 Lpf] to 1.0 gpf [3.8 Lpf]

• Vitreous china

• Asymmetric backwall resulting in reduced splash back

• Patent Pending

• High efficiency washdown flushing action

• Oversized footprint to make retrofit easy

• 3/4” top spud

• 2” I.P.S. outlet flange and rubber gasket with integral trap

• 14” extended rim for handicap compliance when installed at proper height

• Vandal resistant outlet strainer included

• Shipping Weight: 60 lbs.

Z5755 SERIES

*Replaces Zurn Z5750 and Z5798-U

This space is for Architectural/engineering Approval

*Shown with ZTR6203 Flush Valve

This product should be used with a WaterSense labeled counterpart with a compatible flush volume to ensure that the entire system meets the requirements for

Z5755-U Omni-FloTM Top Spud Urinal

0.125 gpf to 1.0 gpf

TAG

Rev. E Date: 4/18/2017 Dwg. No. 312163 Product No. Z5755-U

EcoVantage® is a registered trademark of Zurn Industries, LLC.

Meets the American Disabilities Guidelines and ANSI A117.1 requirements when urinal is installed 432mm (17”) from finished floor.

These dimensions and specifications are subject to change without notice.

Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/ CSA B45 requirements.

ZURN INDUSTRIES, LLC. ♦ COMMERCIAL BRASS OPERATION

5900 ELWIN BUCHANAN DRIVE ♦ SANFORD NC 27330

PHONE: 1-800-997-3876 ♦ FAX: 919-775-3541

WWW.ZURN.COM

IN CANADA: ZURN INDUSTRIES LIMITED

7900 GOREWAY DRIVE UNIT 10 ♦ BRAMPTON, ONTARIO L6T5W6

PHONE: 905-405-8272 FAX: 905-405-1292

Rough-in dimensions for Z5755-U Series

FINISHED WALL

C.L. OUTLET

2 [495]

(121

2 [317.5] ADA)

FINISHED FLOOR

24 [610]

(17 [432] ADA)

4 [362]

8 [651]

38 [966]

(31 [787] ADA)

MAX [470]

2 [63]

2 [468]

2 [140]

A AA A

SECTION A-A

4 [144]

4 +1/2 [121+13]-

2 [64]

4 [102]

4 [387]

4 [210]

4 [286]

14 [356]

UNIVERSAL RETROFIT

BRACKET (UB)

2 [13] TYP.

SLOT SPACING

2 [294]

15 MAX

12 MIN

ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC 27330 Phone: 1-800-997-3876 Fax: 919-775-3541 World Wide Web: www.zurn.com

In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905-405-8272 Fax: 905-405-1292

AquaFlush® is a registered trademark of Zurn Industries, LLC.

Exposed ZEMS6003PL-IS Model Hardwired Automatic Sensor Flush Valve

For 3/4" Urinals

Suffix Options (Check/Specify Appropriate Options) _____ -TFB Triple Filter Bypass _____ -YJ Split Ring Pipe Support _____ -YK Solid Ring Pipe Support _____ -YO Bumper on Angle Stop _____ Other

This space is for Architectural/Engineering Approval

Flow Options -EWS 0.5 GPF Extra Water Saver -WS1 1.0 GPF Low Consumption Flush

Rev. D Date: 2/16/11 Dwg. No. 200022 Product No. ZEMS6003PL-IS

ENGINEERING SPECIFICATION: ZURN ZEMS6003PL-IS

AquaFlush Exposed Hardwired Automatic Sensor Flush Valve For 3/4" Urinals- Exposed, quiet diaphragm-type, chrome plated, flushometer valve with a polished exterior. Com-plete with a chloramine resistant, dual seal diaphragm with a clog resistant by-pass. The valve incorporates a 6 VDC mo-torized actuator, an integral infrared convergence-type prox-imity sensor and a manual push-button override into an all-metal, polished chrome plated housing. The valve is com-plete with high back pressure vacuum breaker, one piece hex coupling nut, adjustable tailpiece, spud coupling and flange for top spud connection. Control stop has internal siphon-guard protection. The AquaFlush® Plus is also furnished with a sweat solder kit, vandal resistant stop cap, and cast wall flange with set screw. Internal seals are made of chloramine resistant materials.

AquaSense® Model

TAG

Accessories (Order seperate as specified) P6000-PC6 6VDC Plug-in Power Converter

(Up to 4 valves) P6000-MJ Mini Junction Box P6000-HW6 Hardwire Power Converter

(Up to 8 valves)

NOTE: MUST USE EITHER ZURN P6000-HW6 HARDWIRE POWER

CONVERTER OR ZURN P6000-PC6 PLUG-IN POWER CONVERTER

TO ENSURE PROPER OPERATION. USING A POWER CONVERTER

OTHER THAN ZURN MAY RESULT IN OPERATION MALFUNCTION

OR UNIT FAILURE.

TAG _______

AquaSpec® is a registered trademark of Zurn Industries, LLC.

ZURN INDUSTRIES, LLC. ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦♦ 5900 ELWIN BUCHANAN DRIVE ♦♦♦♦♦ SANFORD NC 27330 Phone: 1-800-997-3876 ♦♦♦♦♦ Fax: 919-775-3541 ♦♦♦♦♦ World Wide Web: www.zurn.com

In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 7900 Goreway Drive Unit 10 ♦♦♦♦♦ Brampton, Ontario L6T5W6 ♦♦♦♦♦ Phone: 905-405-8272 Fax: 905-405-1292

Rev. H Date:11/9/2017 Dwg. No. 93000 Product No. Z81000-XL

_______________________________ SINGLE CONTROL FAUCET

Z81000-XL

Engineering Specifications: Zurn AquaSpecSingle Control Faucet Z81000-XL Polished chrome plated cast brass 4” [102mm] centerset single control lavatory faucet, a ceramic disc cartridge and a temperature limit stop. Unit is furnished with 2.2 GPM [8.3 L] aerator (complying with ANSI A112.18.1M Standard for flow), an ADA compliant lever handle, mounting hardware, 1/2” NPSM coupling nuts for standard lavatory risers, and pop-up hole plugged.

Note: All dimensions are for reference only. Do not use for pre-plumbing

Zurn Lead Free products (-XL) is the line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with Section 1417 of the Safe Drinking Water Act (SDWA) which mandates the weighted average lead content of no more than 0.25% of the wetted surface.

This product should be used with a WaterSense labeled counterpart with a compatible flush volume to ensure that the entire system meets the requirements for water efficiency and performance.

OPTIONAL ACCESSORIES

Suffix Description

-G 1-1/4” [32mm] Grid Strainer Drain -P 1-1/4” [32mm] Pop-up Drain -PT 1-1/4” [32mm] Cast Brass P-Trap with a 7-1/2” [191mm] Long 17-Gauge Wall Bend -1M 2.2 GPM [8.3 L] Variable-Pressure Compensating Male Aerator -2M 2.2 GPM [8.3 L] Vandal-Resistant Pressure Compensating Male Aerator -3M 0.5 GPM [1.9 L] Vandal-Resistant Pressure Compensating Male Spray Outlet -4M 2.2 GPM [8.3 L] Vandal-Resistant Pressure Compensating Male Laminar Flow -7M* 1.0 GPM [3.8 L] Pressure Compensating Male Spray Outlet -16M 1.0 GPM [3.8 L] Vandal-Resistant Pressure Compensating Male Spray Outlet -17M* 1.5 GPM [5.7 L] Vandal-Resistant Pressure Compensating Male Aerator -18M* 1.5 GPM [5.7 L] Vandal-Resistant Pressure Compensating Laminar Flow -19M* 1.5 GPM [5.7 L] Anti-Microbial Pressure Compensating Male Laminar Flow Outlet -21M 1.0 GPM [3.8L] Male Laminar Flow Outlet-SW Side Wall Mounted Hydraulic Actuator

-22M 1.0 GPM [3.8L] Vandal-Resistant Male Laminar Flow Outlet -23M 1.5 GPM [5.7L] Pressure Compensating Male Aerator -24M 0.35 GPM [1.3 L] Pressure Compensating Male Spray Outlet -25M 0.35 GPM [1.3 L] Vandal-Resistant Pressure Compensating Male Spray Outlet -28M 0.5 GPM [1.9 L] 13/16-27 Jr Male Laminar Flow Outlet

Willoughby Industries - Security Products

S5-11

MADE IN THE U.S.A.

visit our website at www.willoughby-ind.com

Recessed Shower Panel

Front Mounted Recessed Shower Panel shall be:

Willoughby Model No.

(Select from model number and options list on next page)

Shower panel shall be fabricated from 14 gauge, Type 304 stainless steel with exposed stainless surfaces polished to

18 gauge galvanized steel.

Standard equipment shall include:

- Shower valve (Select from Valve Selection options list)

- (NPS) non-adjustable penal shower head

- In-wall mounting frame

Shower panel shall attach to mounting frame with vandal resistant stainless steel screws. Unit requires no chase area for installation and maintenance.

Optional WaterSense Labeled ligature-resistant shower head available (LRSH).

Example: To specify a Front Mounted Recessed Shower Panel with single temp. pneumatic meter-

(NPS) shower head, in-line thermostatic mixing valve, and recessed mounted soap dish

Use the following Willoughby Model Number:

(Unit may be shown with optional features)

© Rev. 8/2021

S5-12

MODEL NUMBER AND OPTIONS:

MADE IN THE U.S.A.

visit our website at www.willoughby-ind.com

VE

R

IF

Y

A

LL

D

IM

EN

SI

O N

S W

IT

H

F A

C

TO

RY

P

R

IO

R T

O R

O U

G H

-IN

W

IL

LO

U G

H B

Y R

ES

ER

VE

S

TH

E

R

IG

H T

TO

M

A K

E C

H A

N G

ES

IN

D

ES

IG

N

A N

D D

IM

EN

SI

O

N S

W

IT

H O

U T

FO

R

M A

L N

O

TI

C E

A N

D W

IT

H

O U

T

IN

C U

R R

IN

G

O B

LI

G

AT

IO

N

WRS-FA Front Mounted Recessed Shower Panel

NV No Valve PML1 Single Temp. Pneumatic Metering PML2 Dual Temp. Pneumatic Metering E1L1 Single Temp. Electronic (Pick Control)* E1L2 Dual Temp. Electronic (Pick Control)* PBV Pressure-Balancing Mixing Valve TPV Temperature/Pressure-Balancing Mixing Valve TPLR Ligature-resistant Temp/Pressure-balancing Mixing Valve SVC Single Temp. Compression Valve DVC Dual Temp. Compression Valves

Pneumatic or Electronic Valves Only:

PBH Ligature-resistant Pneumatic Push Buttons PZPB Ligature-resistant Piezo Electronic Push Buttons*

2.5 GPM (Standard)

2.0 GPM

1.5 GPM

WUSC-2200 WUSC-2400 Pneutronic WMS II

NPS Non-adjustable Penal Shower Head (Standard) APS Adjustable Penal Shower Head UBJ Universal Ball Joint Shower Head LBJ Lockable Ball Joint Shower Head CSH Ligature-resistant Shower Head FX Hand-held Flexshower Head (w/ quick disconnect, vacuum breaker, and (1) hook) LRSH Ligature-resistant Shower Head, WaterSense Labeled,

2.0 GPM Max Flow Rate

TMV In-line Thermostatic Mixing Valve TF24H Hard-wired Transformer, 110VAC to 24VAC* TF24P Plug-in Transformer, 110VAC to 24VAC* RD Recessed Mounted Soap Dish SD Surface Mounted Soap Dish HL Hi-Lo (2 Hooks For Flexshower, Wall Mounted) SLB24 24" Adjustable Slide Bar (for Flexshower, Wall Mounted) Other ________________________ Other ________________________

*(Req. 110V power through ground fault interrupter (GFCI) receptacle) For security applications Ligature-resistant option** reduce the possibility of ligature points, this product does not eliminate all risks. Ligature- Resistant products by Willoughby Industries are to be used in conjunction with, not as a replacement for, trained professionals.

Willoughby Industries - Security Products

S5-15

MADE IN THE U.S.A.

visit our website at www.willoughby-ind.com

Recessed Shower Panel

ADA-Compliant, Front Mounted, Recessed Shower Panel shall be: Willoughby Model No.

(Select from model number and options list on next page)

Shower panel shall be fabricated from 14 gauge, Type 304 stainless steel with exposed stainless surfaces polished to

18 gauge galvanized steel.

Standard equipment shall include:

- Shower valves (from Valve Selection options list)

- Shower heads (from Shower Head Selection options list)

- In-wall mounting frame

Shower panel shall attach to mounting frame with vandal resistant stainless steel screws. Unit requires no chase area for installation and maintenance.

Optional WaterSense Labeled ligature-resistant shower head available (LRSH).

Example: To specify a Front Mounted, Recessed Handicap Shower Panel w/ Hand Held Flexshower Head with left hand controls, single temp. pneumatic metering valves(manifolded), standard ligature-in-line thermostatic mixing valve, and recessed mounted soap dish

Use the following Willoughby Model Number:

(Unit may be shown with optional features)

S5-16

MODEL NUMBER AND OPTIONS:

MADE IN THE U.S.A.

visit our website at www.willoughby-ind.com

VE

R

IF

Y

A

LL

D

IM

EN

SI

O N

S W

IT

H

F A

C

TO

RY

P

R

IO

R T

O R

O U

G H

-IN

W

IL

LO

U G

H B

Y R

ES

ER

VE

S

TH

E

R

IG

H T

TO

M

A K

E C

H A

N G

ES

IN

D

ES

IG

N

A N

D D

IM

EN

SI

O

N S

W

IT

H O

U T

FO

R

M A

L N

O

TI

C E

A N

D W

IT

H

O U

T

IN

C U

R R

IN

G

O B

LI

G

AT

IO

N

WRS-FA-ADA ADA-Compliant, Front Mounted, Recessed Shower Panel

L Left Hand Controls R Right Hand Controls

NV No Valve PML1 Single Temp. Pneumatic Metering PML2 Dual Temp. Pneumatic Metering E1L1 Single Temp. Electronic (Pick Control)* E1L2 Dual Temp. Electronic (Pick Control)*

Valve Manifold Option:

Pneumatic or Electronic Valves Only:

(See the Manifold Option Page at the end of Catalog Section S5 for further information)

MA2

Pneumatic or Electronic Valves Only:

PBH Ligature-resistant Pneumatic Push Buttons PZPB Ligature-resistant Piezo Electronic Push Buttons*

2.5 GPM (Standard)

2.0 GPM

1.5 GPM

WUSC-2200 WUSC-2400 Pneutronic WMS II

APS Adjustable Vandal-resistant Shower Head NPS Non-Adjustable Vandal-resistant Shower Head UBJ Universal Ball Joint Shower Head LBJ Lockable Ball Joint Shower Head CSH Ligature-resistant Shower Head FX Hand-held Flexshower Head (w/ quick disconnect, vacuum breaker, and (1) hook) LRSH Ligature-resistant Shower Head, WaterSense Labeled,

2.0 GPM Max Flow Rate

2HD Dual Fixed Shower Heads

FSS Fold-up Stainless Steel Shower Seat HL Hi-Lo (2 Hooks For Flexshower, Wall Mounted) MT Wall Template TMV In-line Thermostatic Mixing Valve TF24H Hard-wired Transformer, 110VAC to 24VAC* TF24P Plug-in Transformer, 110VAC to 24VAC* RD Recessed Mounted Soap Dish SD Surface Mounted Soap Dish SLB24 24" Adjustable Slide Bar (for Flexshower, Wall Mounted) Other ________________________

*(Req. 110V power through ground fault interrupter (GFCI) receptacle) For security applications Ligature-resistant option** the possibility of ligature points, this product does not eliminate all risks. Ligature-Resistant products by Willoughby Industries are to be used in conjunction with, not as a replacement for, trained professionals.

Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice

ZURN INDUSTRIES, LLC ♦♦♦♦♦ SPECIFICATION DRAINAGE OPERATION ♦♦♦♦♦ 1801 Pittsburgh Ave. ♦♦♦♦♦ Erie, PA 16514 Phone: 814\455-0921 ♦♦♦♦♦ Fax: 814\454-7929 ♦♦♦♦♦ World Wide Web: www.zurn.com

In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905\405-8272 Fax: 905\405-1292

[23]

24 x 24 x 10 [610 x 610 x 254]

ENGINEERING SPECIFICATION: Z1996-24

Mop Service Basin 24 x 24 x 10 [610 x 610 x 254] Molded high density composite basin, PVC drain body, stainless steel strainer and 3 [76] gasketed outlet connection. Certifications: Meets ANSI Z124.6, CSA listed,and IAPMO listed under file # 3561.

Approx.

Wt. Lbs.

[kg]

OPTIONS (Check/specify appropriate options)

SUFFIXES

____ -AW White Body ____ -BS Stainless Steel Bumper Guard ____ -BV Vinyl Bumper Guard ____ -HH Hose and Hose Bracket ____ -MH Mop Hanger ____ -NHG PVC Drain Gasket for No-Hub Pipe ____ -PRP Pipe Reducer for PVC Drain ____ -PRS Pipe Reducer for Stainless Steel Drain ____ -SDL Stainless Steel Drain with Dome Strainer, Lint Basket and Locking Nut ____ -SF Service Faucet ____ -WG Wall Guard #20 Gage Type 304 Stainless Steel (2 Panels-Indicate Size)

Z1996-24 MOP SERVICE BASIN 24 x 24 [610 x 610]

TAG _______

Mop Basin SizeProduct

__ Z1996-24

Rev. K Date: 03/06/13 C.N. No. 128895 Prod./Dwg. No. Z1996-24

SPECIFICATIONS

Elkay Stainless Steel 49-1/2" x 24" x 10 Wall Hung Service Sink Kit Model(s) ESS4924RW6C

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 06032022 1-800-476-4106 © 2022 Page 1 ESS4924RW6C CustCare@Elkay.com ESS4924RW6C_spec.pdf

PRODUCT SPECIFICATIONS

Elkay Stainless Steel 49-1/2" x 24" x 10, Wall Hung Service Sink Kit.

Sink is manufactured from 14 gauge 304 Stainless Steel with a Buffed Satin finish, Center drain placement.

Material: 304 Stainless Steel

Special Features: Drainboard

Finish: Buffed Satin

Gauge: 14

Number of Bowls: 1

Sink Dimensions: 49-1/2" x 24" x 10"

Bowl 1 Dimensions: 18" x 20-1/2" x 10"

Drain Size: 3-1/2" (89mm)

Drain Location: Center

Included with Product: ESS4924 sink, one LK940GN08T6H faucet, one LK18B grid drain

Ships in multiple boxes.

AMERICAN PRIDE. A LIFETIME TRADITION.

Like your family, the Elkay family has values and traditions that endure.

For almost a century, Elkay has been a family-owned and operated company, providing thousands of jobs that support our families and communities.

Product Compliance: ASME A112.19.3/CSA B45.4 Buy American Act

Faucet: ADA & ICC A117.1

ASME A112.18.1/CSA B125.1

CEC

NSF 372 (lead free)

NSF 61

Accessory: ASME A112.18.2/CSA B125.2

Faucet complies with ADA & ICC A117.1 accessibility requirements when installed according to the requirements outlined in these standards.

Clean and Care Manual (PDF) Installation Instructions (PDF) - A55483 Installation Instructions (PDF) - 1000005235_drain Warranty (PDF)

PART:________________________________QTY: _____________

PROJECT:______________________________________________

CONTACT:______________________________________________

DATE:__________________________________________________

NOTES:_________________________________________________

APPROVAL:_____________________________________________

http://www.elkay.com/products/details/ess4924rw6c http://www.elkay.com/products/details/ess4924rw6c mailto:CustCare@Elkay.com http://www.elkayfiles.com/care-cleaning-install-warranty-sheets/1000005386.pdf http://www.elkayfiles.com/care-cleaning-install-warranty-sheets/a55483.pdf http://www.elkayfiles.com/care-cleaning-install-warranty-sheets/1000005235_drain.pdf http://www.elkayfiles.com/care-cleaning-install-warranty-sheets/1000005134.pdf

SPECIFICATIONS

Elkay Stainless Steel 49-1/2" x 24" x 10 Wall Hung Service Sink Kit Model(s) ESS4924RW6C

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 06032022 1-800-476-4106 © 2022 Page 2 ESS4924RW6C CustCare@Elkay.com ESS4924RW6C_spec.pdf http://www.elkay.com/products/details/ess4924rw6c http://www.elkay.com/products/details/ess4924rw6c mailto:CustCare@Elkay.com