Addendum 1_RFB 26-0224-Full Cabin Vessel.pdf
PDF 1 MB Posted
- Attached to
- RFB 26-0224 PURCHASE OF FULL CABIN VESSEL
- Solicitation number
- 338-26-0224
- Issued by
- Camden County, North Carolina
About this file
This is Addendum 1 to a Request for Bids (RFB #26-0224) issued by New Hanover County Finance Department Purchasing Division for the purchase of one 31-foot full cabin aluminum vessel with twin 450 HP Yamaha outboards for law enforcement and rescue use. The vessel specifications include a 10-foot beam with collar, self-bailing cockpit, 185-gallon fuel capacity, and comprehensive cabin features including fully enclosed aluminum construction with walk-through design, grab rails, side slider glass doors, window skylights, insulation, carpeting, heat-reducing roof coating, and multiple Shockwave dropdown seats. The vessel must include extensive electronics equipment such as dual Garmin 8616XSV GPS chartplotters, Garmin Fantom 18x radar, Garmin 215 VHF radio, FLIR M332 thermal camera, and navigation and communication systems. Additional features include a Westerbeke 3.5 kW generator, comprehensive LED lighting package with law enforcement alert lights, and safety equipment including fire extinguishers, life ring, and carbon monoxide detector. The bid requires that bidders demonstrate current operational use of a minimum of three 31-foot full cabin hulls by other U.S. agencies and provide contact information. The vessel must be delivered within 365 days of project start and include one full day of manufacturer training for county personnel, water testing, and inspection prior to shipping.
Warranty requirements include a 15-year limited hull warranty and 5-year limited collar warranty, with all warranty documentation included in the bid submission. The revised Specifications Compliance Checklist must accompany all bids, with bidders instructed to submit sealed bids clearly marked "RFB #26-0224 FULL CABIN VESSEL." The vessel must be constructed from 5086 marine-grade aluminum alloy with specific thickness requirements for hull plate (minimum 1/4 inch), side sheets (minimum 3/16 inch), and deck plates (minimum 3/16 inch), featuring continuous welding along all metal joints. The specification includes an aluminum tandem axle trailer with spare tire and bow ladder with sufficient capacity for the fully loaded boat. All equipment must meet or exceed federal and state regulations and industry standards, and any deviations from specifications must be clearly identified in the proposal.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NEW HANOVER COUNTY
FINANCE DEPARTMENT PURCHASING DIVISION
ADDENDUM 1
From: Lena Butler, Purchasing Supervisor To: All Bidders Project: RFB # 26-0224 RFB Full Cabin Vessel Date: Friday, November 7, 2025
This Addendum is related to the County’s Request for Bids “2026 RFB PURCHASE OF CHEVROLET TAHOE” and is hereby made a part of said Request for Proposals to the same extent as though it were originally therein.
1. Correction to 2.2.1 on Page 3, Bidders are instructed to submit their bid in a sealed envelope and clearly marked “RFB # 26-0224 FULL CABIN VESSEL.
2. Corrections to the Specification Compliance Checklist: A revised Specification Compliance Checklist is attached to this addendum. This replaces the Checklist included in the bidding documents. Please note deleted items as they do not pertain to this request for bids and require no response.
End of Addendum 1
REVISED
SPECIFICATIONS COMPLIANCE CHECKLIST
PLEASE INCLUDE WITH YOUR BID
Item Description Meets (y/n) Proposed Vessel and Motors
Aluminum, Mono Hull, Collared, Self-Bailing Cockpit, Full Cabin Vessel for Law Enforcement/Rescue use Hull Length (Feet) - 31'
Beam with Collar (Feet) - 10'
Enclosed locking radio box
Deadrise at Transom - 22°
Deadrise at Entry - 48°
DETAILED SPECIFICATIONS
Boat - Specifications It is the intent of this specification to cover the basic requirements of a well-designed boat. The unit described must be the latest model currently produced by well-established manufacturer. It must be capable of withstanding rugged waters. Appurtenances and/or accessories not herein mentioned, but necessary to furnish a complete and operational unit must be included, and must conform to the best practice known to the industry in strength, quality, and design, and will be subject to these specifications in full. All equipment furnished must meet or exceed federal, and state regulations, as well as industry standards. If provided specification is different than noted, you MUST identify the difference in your proposal.
Does not pertain to RFB
REVISED
SPECIFICATIONS COMPLIANCE CHECKLIST
PLEASE INCLUDE WITH YOUR BID
jashworth Cross-Out
Fuel Capacity (Gal) - 185 Gallons- minimum
Twin 450 HP YAMAHA Outboards, Includes all Necessary Rigging, Controls, Power Steering w/ Tilt Helm, Stainless Steel Propellers, All Installation and Testing Stainless Steel Steering Wheel w/Knob
Bidder must currently have a minimum of three 31' FULL Cabin hulls in use by other agencies in the USA (Provide Contacts on separate sheet of paper to include Agency Name) 48" Wide Center Console with Aluminum Hardtop Off Three-Piece Windshield Rear Locker Bench Seats with Cushions; Bench seats to have lift-up points/handles. Generator to be on main deck, under one of Rear Bench seats.
Canvas Enclosure
Cushioned Bench Seat w/ space for a cooler beneath cushioned bench seat Cabin
Full cabin shall be built out of aluminum, fully enclosed walk-thru design, center isle way with step down into front cuddy cabin.
Grab rails shall be installed around the cabin.
Front cuddy cabin shall be walk thru to open bow area.
Front cuddy cabin shall include storage under cushioned bench seat areas.
Does not pertain to RFB
Does not pertain to RFB
Does not pertain to RFB
REVISED
SPECIFICATIONS COMPLIANCE CHECKLIST
PLEASE INCLUDE WITH YOUR BID
jashworth Cross-Out jashworth Cross-Out
Full cabin shall be outfitted with side slider doors (full glass) at both the port and starboard helm positions. Front cuddy cabin shall have cabin access door and front access hatch/door to bow. Sliding windows shall be installed where appropriate throughout the cabin for additional ventilation and air flow. Aft Cabin door
Full cabin shall have window skylights for added visibility and light admittance.
Full cabin and front cuddy cabin interior shall be insulated.
Full cabin and front cuddy cabin walls and ceiling shall be carpeted.
Full cabin roof shall be coated with heat reducing paint.
Long Gun Storage Locker In-Cabin w/ Countertop and Electric Outlet One (1) 16k BTU In Cabin Air-Conditioner (rooftop Air Conditioner NOT acceptable) Minimum of (4) Multi-speed 12v fans shall be installed in the full cabin.
Full cabin shall have Two (2) Shockwave S2, or equivalent, bulkhead mount dropdown seats for operation while seated and standing.
Adjustable Height Foot-rests for the Operator and Navigator positions Helm and Navigator seats shall have foldable arm rests on both sides.
Add 3rd and 4th Shockwave seats (or compatible) mounted on storage boxes; located behind Operator and Navigator seats Add Interior Cabin Removable Window Coverings
Add One (1) Flip-up Workstation behind Navigator seat in front of 3rd Drop pan seat. W/adjacent Power Outlets (110V +12V)
REVISED
SPECIFICATIONS COMPLIANCE CHECKLIST
4 EXTRA LARGE Cup holders, Flush Mounted
Windshield Wiper & Washer System w/ Multi-Speed Control and Delay Features Heating System, Electric 110v. Dial-A-Watt (Requires Inverter, or Generator to Operate When not on Shore Power)
Hull Features
5086 Aluminum Plate Construction ONLY
Hull plate shall be constructed out of corrosion resistant marine-grade aluminum alloy 5086 and shall be at least 1/4" thick.
Side Sheets shall be constructed out of corrosion resistant marine-grade aluminum alloy 5086 and shall be at least 3/16" thick.
Deck plates shall be constructed out of corrosion resistant marine-grade aluminum alloy 5086 and shall be at least 3/16" thick.
Superstructure shall be constructed out of corrosion resistant marine-grade alloy 5086 and shall be at least 5/32" thick Hull, deck and cabin structures shall have a continuous weld along the entire length of the metal joints.
Two sets of Performance Fins, FWD and AFT, Port and Starboard
Accessible Bilge (pressure sealed hulls are not acceptable)
Perpendicular Longitudinal Stringers
Full Height Girders and Traditional Transverse Framing
REVISED
SPECIFICATIONS COMPLIANCE CHECKLIST
Watertight Welded Aluminum Self-Bailing Cockpit Decks
Perimeter Aluminum Handrails
Buoyancy Foam Filled Fiberglass Bags Under Decks
Removable Center Deck Plate for Fuel Tank Access
Bottom Paint, Primer + Antifouling Per Manufacturers Specifications for 25' x 8'-6" Beam Hull.
Fuel Tank, Aluminum Welded, Baffled, Epoxy Coated
Welded In Speed Shoe Pad in Bottom Plate
Zipwake Gyro Stabilized 300 Series Trim Kit
Lifting Strakes, Interceptors and Spray Rails Tailored to Craft Configuration Drop Bow Door w/Ladder and Hand Rails
Bow lockers w/seat cushions
Welded Bow Eye and Welded Stern Eyes
Stainless Steel Hardware
Eight (8) Weld-On Aluminum Cast Cleats - 10"
Does not pertain to RFB
REVISED
SPECIFICATIONS COMPLIANCE CHECKLIST
PLEASE INCLUDE WITH YOUR BID
Transom External Mount Brackets for Zincs, Lights, and Transducers and Intakes Taft / Crash Rail Around Outboard Motors w/ Fairleads for Tow Line Add Bow Samson Tow Post
Tow Bollard w/two cross pins, Integrated w/ Stern rigging Locker and Hull Structure Collar Features
100% Polyethylene Foam Collar System w/ Small Air- Bladder for Collar Collar to meet waterline for stability and added floatation (no other options will be accepted) Tensioning Air-Bladder Inside Foam and not Against Side-Sheet
Expanded Polyethylene (EPE) 1.3 pcf Density Foam
Collar Skin Tensioning Urethane Air-Bladder Protected Inside Foam TPU Aliphatic PU Skins, Heat and RF Welded Seams
In addition to RF welded seams, each seam to be sewn with PTFE UV resistant thread for added strength Single Collar Color (TBD)
Rub Strake on Collar (Black or Gray in color)
Does not pertain to RFB
REVISED
SPECIFICATIONS COMPLIANCE CHECKLIST
PLEASE INCLUDE WITH YOUR BID
Personnel Recovery Cut-Out (PRC) one on each side
Epoxy Painted Side Sheets Behind Collar System
Prefer Boat Builder to design and build collar system. Third Party vendor is NOT PREFERRED Lettering on Collars, Color, placement and Text TBD
ANCHOR COMPARTMENT
Anchor shall be integrated into the hull, below the drop-down bow door.
Anchor compartment shall be accessible via deck hatch and include an anchor tie down and have self-draining capabilities.
Windshield Wiper & Washer System w/ Multi-Speed Control and Delay Features Cushioned Bench Seat w/ Backrest Fwd. of Console
Anti-Glare Dash Covering
Webasto AT2000 Diesel Heater with Diesel Fuel Tank - for T-Top
Exterior Grab Rails Around Hardtop, FWD Console and Aft Structure Two (2) Recessed Cup Holders
Tall Weapons Locker with shelves and locks/ Storage Bolster w/ Rear Hardtop Stanchions
Does not pertain to RFB
Does not pertain to RFB
Does not pertain to RFB
Does not pertain to RFB
Does not pertain to RFB
Does not pertain to RFB
Does not pertain to RFB
REVISED
SPECIFICATIONS COMPLIANCE CHECKLIST
PLEASE INCLUDE WITH YOUR BID
Leaning Bolster for sitting or standing while in operation
Dash Mounted Switches for all Electronics
Rigging Features
Electric Bilge Pump w/ auto/man/off switch 2000GPM
Robust Electrical System with Dedicated House AGM Battery Bank EPA Compliant Fuel-System w/ Fuel Filters, WEMA Sending Unit
Add One (1) Hinged Electronics arch for closed radar, blue light bar and FLIR. Hinged from AFT of hard top, secured with stainless knurled knob hardware in Up or Down position for transport.
When in DOWN position, arch will block aft cabin door Two (2) 12v Electrical Plugs
Two (2) 12v USB/USB-C (combined) Electrical Plugs
Navigation / Communication Equipment
Ritchie Compass
Navigation Trumpet Horn
FLIR M332 Stabilized Single Payload Thermal Camera (320x256 Vox Microbolometer) w/ Pan, Tilt and Electronic Zoom Installed on Hinged Riser Bracket and Integrated to One Screen
Does not pertain to RFB
Does not pertain to RFB
Does not pertain to RFB
REVISED
SPECIFICATIONS COMPLIANCE CHECKLIST
PLEASE INCLUDE WITH YOUR BID
jashworth Cross-Out
Add One (1) Hinged Electronics arch for closed radar, blue light bar and FLIR. Hinged from AFT of Cabin, secured with stainless knurled knob hardware in Up or Down position for transport.
Two (2) Garmin 8616XSV GPS Chartplotters
Garmin Fantom 18x Radar
Garmin 215 VHF radio w/antenna and speaker
One (1) miniRad-V G2 Vehicle and Vessel Mounted Radiation Detector, includes Csl Detector-alarm unit, w/ Extended Warranty Add GARMIN 9 Axis Heading Sensor
Rear Deck Camera
Installation of Agency provided radio/antenna
NMEA 2k Network Back Bone
Engine Data and Fuel Level Networked
One (1) Stereo Headunit, w/ Bluetooth and Four (4) Marine Speakers Electrical
2,000W Inverter
30AMP Shore Power Service with Battery Charger
REVISED
SPECIFICATIONS COMPLIANCE CHECKLIST
Generator
Generator, Westerbeke 3.5 kw Low-CO Gasoline, Raw-Water Cooled, Muffled Exhaust Thru-Transom/installed on Main Deck, under rear, cushioned bench seat Lighting
Navigation Lights (LED)
Anchor Light (LED)
Law Enforcement Package - LED Alert Lights, GFE Radio Install, Hailer, Sirens-Blue LED lights mounted on each corner of Top Red/White Dome Light (LED)
Deck Courtesy Lights (LED)
Remote Controlled Spotlight 500,000 Candela (minimum)-LED
White LED Spreader Lights and LED work lights- Port, Starboard & Rear of cabin Finish
Bare Mill Finish Aluminum
Non-Skid Deck Covering (Black in Color)
Safety, Security, Rescue Equipment
REVISED
SPECIFICATIONS COMPLIANCE CHECKLIST
Transom Ladder
Flagpole Holder w/ American Flag
Aluminum Anodes
Two (2) Fire-Extinguishers
Stainless steel Steering wheel w/knob
Add Mercury 1st Mate Marine Safety and Security System
One (1) Tactical Flashlight w/recharable base
Carbon Monoxide Detector
One (1) Jim-Buoy GO-X-24T, 24” Orange Life Ring, w/ Life Buoy Distress Marker Light, and Rail Mount Tow Line- 200’ of ¾” Double Braided Nylon
Outfit Kit including Anchor w/ Chain and Rode, Dock- Lines, Fenders, Boat Hook Trailer
Aluminum Tandem Axle Trailer w/ Spare Tire and Bow Ladder
Trailer Capacity for Weight of Fully Loaded Boat
Does not pertain to RFB
Does not pertain to RFB
Does not pertain to RFB
REVISED
SPECIFICATIONS COMPLIANCE CHECKLIST
PLEASE INCLUDE WITH YOUR BID
jashworth Cross-Out
Bow and Stern Tie-Downs
Logistics
One Full Day of Training for New Hanover County Sheriff Personnel, at manufacturers location. Includes water test and inspection of completed boat, prior to shipping Shrink Wrap Boat and Shipping Prep
Shipping to Sheriff's Office
Warranty
Include Warranty Documents/info with Bid submission
15 Year Limited HULL Warranty
5 Year Limited Collar Warranty
Delivered within 365 days of start of project
REVISED
SPECIFICATIONS COMPLIANCE CHECKLIST
| 31FC Bid Specifications Compliance Checklist Final 11.7.2025.pdf |
| Table 1 |
| ProposedAluminum Mono Hull Collared SelfBailing Cockpit Full Cabin Vessel for Law EnforcementRescue use: |
| ProposedHull Length Feet 31: |
| ProposedBeam with Collar Feet 10: |
| ProposedDeadrise at Transom 22: |
| ProposedDeadrise at Entry 48: |
| Dropdown11: [NO] |
| Fuel Capacity Gal 185 Gallons minimum: |
| Twin 450 HP YAMAHA Outboards Includes all Necessary Rigging Controls Power Steering w Tilt Helm Stainless Steel Propellers All Installation and Testing: |
| Stainless Steel Steering Wheel wKnob: |
| Bidder must currently have a minimum of three 31 FULL Cabin hulls in use by other agencies in the USA Provide Contacts on separate sheet of paper to include Agency Name: |
| Rear Locker Bench Seats with Cushions Bench seats to have liftup pointshandles Generator to be on main deck under one of Rear Bench seats: |
| Full cabin shall be built out of aluminum fully enclosed walkthru design center isle way with step down into front cuddy cabin Grab rails shall be installed around the cabin: |
| Front cuddy cabin shall be walk thru to open bow area: |
| Front cuddy cabin shall include storage under cushioned bench seat areas: |
| Full cabin shall be outfitted with side slider doors full glass at both the port and starboard helm positions Front cuddy cabin shall have cabin access door and front access hatchdoor to bow Sliding windows shall be installed where appropriate throughout the cabin for additional ventilation and air flow Aft Cabin door: |
| Full cabin shall have window skylights for added visibility and light admittance: |
| Full cabin and front cuddy cabin interior shall be insulated: |
| Full cabin and front cuddy cabin walls and ceiling shall be carpeted: |
| Full cabin roof shall be coated with heat reducing paint: |
| Long Gun Storage Locker InCabin w Countertop and Electric Outlet: |
| One 1 16k BTU In Cabin AirConditioner rooftop Air Conditioner NOT acceptable: |
| Minimum of 4 Multispeed 12v fans shall be installed in the full cabin: |
| Full cabin shall have Two 2 Shockwave S2 or equivalent bulkhead mount dropdown seats for operation while seated and: |
| Adjustable Height Footrests for the Operator and Navigator positions: |
| Helm and Navigator seats shall have foldable arm rests on both sides: |
| Add 3rd and 4th Shockwave seats or compatible mounted on storage boxes located behind Operator and Navigator seats: |
| Add Interior Cabin Removable Window Coverings: |
| Add One 1 Flipup Workstation behind Navigator seat in front of 3rd Drop pan seat Wadjacent Power Outlets 110V 12V: |
| 4 EXTRA LARGE Cup holders Flush Mounted: |
| Windshield Wiper Washer System w MultiSpeed Control and Delay Features: |
| Heating System Electric 110v DialAWatt Requires Inverter or Generator to Operate When not on Shore Power: |
| 5086 Aluminum Plate Construction ONLY: |
| Hull plate shall be constructed out of corrosion resistant marine grade aluminum alloy 5086 and shall be at least 14 thick: |
| Side Sheets shall be constructed out of corrosion resistant marine grade aluminum alloy 5086 and shall be at least 316 thick: |
| Deck plates shall be constructed out of corrosion resistant marine grade aluminum alloy 5086 and shall be at least 316 thick: |
| Superstructure shall be constructed out of corrosion resistant marinegrade alloy 5086 and shall be at least 532 thick: |
| Hull deck and cabin structures shall have a continuous weld along the entire length of the metal joints: |
| Two sets of Performance Fins FWD and AFT Port and Starboard: |
| Accessible Bilge pressure sealed hulls are not acceptable: |
| Perpendicular Longitudinal Stringers: |
| Full Height Girders and Traditional Transverse Framing: |
| Watertight Welded Aluminum SelfBailing Cockpit Decks: |
| Perimeter Aluminum Handrails: |
| Buoyancy Foam Filled Fiberglass Bags Under Decks: |
| Removable Center Deck Plate for Fuel Tank Access: |
| Fuel Tank Aluminum Welded Baffled Epoxy Coated: |
| Welded In Speed Shoe Pad in Bottom Plate: |
| Zipwake Gyro Stabilized 300 Series Trim Kit: |
| Lifting Strakes Interceptors and Spray Rails Tailored to Craft Configuration: |
| Drop Bow Door wLadder and Hand Rails: |
| Bow lockers wseat cushions: |
| Welded Bow Eye and Welded Stern Eyes: |
| Stainless Steel Hardware: |
| Eight 8 WeldOn Aluminum Cast Cleats 10: |
| Transom External Mount Brackets for Zincs Lights and Transducers and Intakes: |
| Taft Crash Rail Around Outboard Motors w Fairleads for Tow Line: |
| Add Bow Samson Tow Post: |
| Tow Bollard wtwo cross pins Integrated w Stern rigging Locker and Hull Structure: |
| 100 Polyethylene Foam Collar System w Small Air Bladder for Collar: |
| Collar to meet waterline for stability and added floatation no other options will be accepted: |
| Expanded Polyethylene EPE 13 pcf Density Foam: |
| Collar Skin Tensioning Urethane AirBladder Protected Inside Foam: |
| TPU Aliphatic PU Skins Heat and RF Welded Seams: |
| In addition to RF welded seams each seam to be sewn with PTFE UV resistant thread for added strength: |
| Single Collar Color TBD: |
| Rub Strake on Collar Black or Gray in color: |
| Personnel Recovery CutOut PRC one on each side: |
| Epoxy Painted Side Sheets Behind Collar System: |
| Prefer Boat Builder to design and build collar system Third Party vendor is NOT PREFERRED: |
| Lettering on Collars Color placement and Text TBD: |
| Anchor shall be integrated into the hull below the dropdown bow door: |
| Anchor compartment shall be accessible via deck hatch and include an anchor tie down and have selfdraining capabilities: |
| Electric Bilge Pump w automanoff switch 2000GPM: |
| Robust Electrical System with Dedicated House AGM Battery Bank: |
| EPA Compliant FuelSystem w Fuel Filters WEMA Sending Unit: |
| Two 2 12v Electrical Plugs: |
| Two 2 12v USBUSBC combined Electrical Plugs: |
| Ritchie Compass: |
| Navigation Trumpet Horn: |
| FLIR M332 Stabilized Single Payload Thermal Camera 320x256 Vox Microbolometer w Pan Tilt and Electronic Zoom Installed on Hinged Riser Bracket and Integrated to One Screen: |
| Add One 1 Hinged Electronics arch for closed radar blue light bar and FLIR Hinged from AFT of Cabin secured with stainless knurled knob hardware in Up or Down position for transport: |
| Two 2 Garmin 8616XSV GPS Chartplotters: |
| Garmin Fantom 18x Radar: |
| Garmin 215 VHF radio wantenna and speaker: |
| One 1 miniRadV G2 Vehicle and Vessel Mounted Radiation Detector includes Csl Detectoralarm unit w Extended Warranty: |
| Add GARMIN 9 Axis Heading Sensor: |
| Rear Deck Camera: |
| Installation of Agency provided radioantenna: |
| NMEA 2k Network Back Bone: |
| Engine Data and Fuel Level Networked: |
| One 1 Stereo Headunit w Bluetooth and Four 4 Marine Speakers: |
| 2000W Inverter: |
| 30AMP Shore Power Service with Battery Charger: |
| Generator Westerbeke 35 kw LowCO Gasoline RawWater Cooled Muffled Exhaust ThruTransominstalled on Main Deck under rear cushioned bench seat: |
| Navigation Lights LED: |
| Anchor Light LED: |
| Law Enforcement Package LED Alert Lights GFE Radio Install Hailer SirensBlue LED lights mounted on each corner of Top: |
| RedWhite Dome Light LED: |
| Deck Courtesy Lights LED: |
| Remote Controlled Spotlight 500000 Candela minimumLED: |
| White LED Spreader Lights and LED work lights Port Starboard Rear of cabin: |
| Bare Mill Finish Aluminum: |
| NonSkid Deck Covering Black in Color: |
| Transom Ladder: |
| Flagpole Holder w American Flag: |
| Aluminum Anodes: |
| Two 2 FireExtinguishers: |
| One 1 Tactical Flashlight wrecharable base: |
| Carbon Monoxide Detector: |
| One 1 JimBuoy GOX24T 24 Orange Life Ring w Life Buoy Distress Marker Light and Rail Mount: |
| Outfit Kit including Anchor w Chain and Rode Dock Lines Fenders Boat Hook: |
| Aluminum Tandem Axle Trailer w Spare Tire and Bow Ladder: |
| Trailer Capacity for Weight of Fully Loaded Boat: |
| Bow and Stern TieDowns: |
| One Full Day of Training for New Hanover County Sheriff Personnel at manufacturers location Includes water test and inspection of completed boat prior to shipping: |
| Shrink Wrap Boat and Shipping Prep: |
| Shipping to Sheriffs Office: |
| Include Warranty Documentsinfo with Bid submission: |
| 15 Year Limited HULL Warranty: |
| 5 Year Limited Collar Warranty: |
| Delivered within 365 days of start of project: |
File details come from the government source that posted it. Updated .