Addendum 1.pdf

PDF 1 MB Posted

Attached to
RFB-266-26 KSU - Walkway Improvements and Misc. Repairs
Solicitation number
RFB 785 2600000588 2
Issued by
Elliott County, Kentucky

About this file

Written by GovTribe AI ·

This is Addendum No. 1 to Request for Bid (RFB) No. 266-26 issued by the Commonwealth of Kentucky Department for Facilities and Support Services, Division of Engineering and Contract Administration for Walkway Improvements and Miscellaneous Repairs—Phase 2 at Kentucky State University in Frankfort, Kentucky. The addendum, dated May 22, 2026, modifies the original bid documents by providing revisions to specifications and drawings. The primary change includes the attachment of new drawing L701, which depicts elevations of a proposed segmental retaining wall system at the Bradford Hall site. The drawing shows modular block retaining wall elevations with top-of-wall (TOW) elevations at 757.0, 755.0, and 753.0, along with specifications for wall construction including crushed stone or concrete leveling pads, compacted subgrade, and finish grades. The basis of design specifies a Verti-Block gravity wall or approved equivalent products, with dimensional information provided in schematic format showing straight and curved sections ranging from 16 to 84 feet in length.

The addendum requires that a full shop drawing submittal including final design calculations and an engineer's stamp be provided by the contractor for review and record. Final wall design is the responsibility of the manufacturer or manufacturer's engineer of record, with allowances for height adjustments provided that slopes behind the wall within the zone of influence do not exceed the manufacturer's requirements. The document includes a revision history section and notes that plan sheets are intended to be viewed in color for complete information clarity. The drawing was prepared by Element, a landscape architecture, civil engineering, and planning firm with offices in Lexington and Louisville, Kentucky, and is associated with Account No. 435-CAZL-KS36-01.

View the file

Other files

File Type Posted
Final_RFB_785_2600000588_2_SO_FORM.PDF PDF
Final_RFB_785_2600000588_1_SO_FORM.PDF PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

COMMONWEALTH OF KENTUCKY

DEPARTMENT FOR FACILITIES AND SUPPORT SERVICES

DIVISION OF ENGINEERING AND CONTRACT ADMINISTRATION

INVITATION TO BID NO: RFB-266-26

FOR: Walkway Improvements and Miscellaneous Repairs – Phase 2

Kentucky State University Frankfort, Kentucky

DATE: May 22, 2026

RFB-785-2600000588

ADDENDUM NO. One (1)

BIDDER SHALL CONFORM TO THE FOLLOWING CHANGES AS SAME SHALL BECOME BINDING

UPON THE CONTRACT TO BE ISSUED IN RESPONSE TO THIS INVITATION TO BID.

Item 1: Refer to attached addendum for all additions, deletions, and/or changes to specifications and/or drawings.

END OF ADDENDUM

Invitation to Bid No.

For:

RFB-266-26

Walkway Improvements and Miscellaneous Repairs – Phase 2 Kentucky State University Frankfort, Kentucky

Janis Wilhoite, Statewide Procurement Analyst II Division of Engineering and Contract Administration addendum 1 landscape architecture + civil engineering + planning 366 South Broadway 1018 East Jefferson Street Lexington, Kentucky 40508 Louisville, KY 40206

859.389.6533 www.element-site.com

KSU – Walkway Improvements & Repairs Kentucky State University

Account No. 435-CAZL-KS36-01

RFB-266-26

May 21, 2026

ADDENDUM #1

DRAWING REVISIONS:

1. Refer to the Drawings, see attached new drawing L701 for elevations of proposed segmental retaining wall at Bradford Hall site.

QUESTIONS:

Refer to the Drawings

Q1:

ADDITIONAL INFORMATION / ENCLOSURES:

• Attached new drawing L701.

http://www.element-site.com/

52'+/- STRAIGHT16'+/- CURVE20'+/- STRAIGHT

84'+/- CURVE

REVISION HISTORY OF THIS DRAWING

DECA LOG #

ACCOUNT NO.

DRAWING NO.

DRAWN BY

COMMONWEALTH OF KENTUCKY

FINANCE AND ADMINISTRATION CABINET

DEPARTMENT FOR FACILITIES AND SUPPORT SERVICES

DIVISION OF ENGINEERING AND CONTRACT ADMINISTRATION

FRANKFORT, KENTUCKY

DESCRIPTION OF REVISIONS DATE DESCRIPTION OF REVISIONS DATE

CHECKED BY

PHASE

RTA DATE

DRAWING DATE

A & E FILE NO.

DRAWING INFORMATION

landscape architecture+civil engineering+planning 366 south broadway lexington, ky 40508

p. 859.389.6533

f. 859.389.6534 www.element-site.com

1018 east jefferson louisville, ky 40206

p. 502.489.4221

RAF

RAF

Kentucky State University - Frankfort, KY

DECA REVIEWED

FOR INTENT ONLY

KSU - Walkway Improvements & Repairs - Phase 2

435-CAZL-KS36-01

04/13/2026

04/13/2026

BID DOCUMENTS

NOTE: PLANS SHEETS ARE INTENDED TO

BE VIEWED IN COLOR; IF COLOR DOES

NOT APPEAR ON PLAN SHEETS, SOME

INFORMATION MAY NOT BE INDICATED

L701

RETAINING WALL ELEVATION

MODULAR BLOCK RETAINING WALL ELEVATION A

A

NOTES:

1. DETAIL DEPICTED IS BASIS OF DESIGN PRODUCT VERTI-BLOCK GRAVITY WALL. REFER TO SPECIFICATIONS

FOR APPROVED EQUIVALENT PRODUCTS.

2. A FULL SHOP DRAWING SUBMITTAL INCLUDING FINAL DESIGN CALCULATIONS AND ENGINEER'S STAMP IS TO BE

PROVIDED FOR REVIEW AND RECORD.

3. WALL ELEVATIONS, DETAILS AND DIMENSIONS ARE SCHEMATIC AND INTENDED TO CONVEY THE APPROXIMATE

CONDITIONS AND INTENT OF MODULAR WALL SYSTEM. FINAL DESIGN BY MANUFACTURER / MANUFACTURER'S ENGINEER OF RECORD. FINAL HEIGHT OF WALL MAY BE ADJUSTED AS REQUIRED AS LONG AS SLOPES

BEHIND WALL WITHIN ZONE OF INFLUENCE DO NOT EXCEED MANUFACTURER'S REQUIREMENTS.

TOW 757.0

APPROX. GRADE AT BACK

OF WALL

FINISH GRADE AT FRONT

OF WALL

CRUSHED STONE OR CONCRETE

LEVELING PAD AS REQUIRED BY

MANUFACTURER'S WALL ENGINEERCOMPACTED SUBGRADE

BELOW

B L603 M

AT

C

H

LI

N E

A M

AT

C

H

LI

N E

B

M

AT

C H

LI

N

E A

M

AT

C H

LI

N

E B

MODULAR BLOCK RETAINING WALL ELEVATION B

B

B L603

TOW 755.0

TOW 753.0

NOTES:

1. DETAIL DEPICTED IS BASIS OF DESIGN PRODUCT VERTI-BLOCK GRAVITY WALL. REFER TO SPECIFICATIONS

FOR APPROVED EQUIVALENT PRODUCTS.

2. A FULL SHOP DRAWING SUBMITTAL INCLUDING FINAL DESIGN CALCULATIONS AND ENGINEER'S STAMP IS TO BE

PROVIDED FOR REVIEW AND RECORD.

3. WALL ELEVATIONS, DETAILS AND DIMENSIONS ARE SCHEMATIC AND INTENDED TO CONVEY THE APPROXIMATE

CONDITIONS AND INTENT OF MODULAR WALL SYSTEM. FINAL DESIGN BY MANUFACTURER / MANUFACTURER'S ENGINEER OF RECORD. FINAL HEIGHT OF WALL MAY BE ADJUSTED AS REQUIRED AS LONG AS SLOPES

BEHIND WALL WITHIN ZONE OF INFLUENCE DO NOT EXCEED MANUFACTURER'S REQUIREMENTS.

TOW 757.0

FINISH GRADE AT FRONT

OF WALL

CRUSHED STONE OR CONCRETE

LEVELING PAD AS REQUIRED BY

MANUFACTURER'S WALL ENGINEERCOMPACTED SUBGRADE

BELOW

BW 747.5+/-

BW 747.5+/-

1 Addendum #1 05/22/26

Addendum #1 05/22/26

AutoCAD SHX Text T

AutoCAD SHX Text A.

AutoCAD SHX Text

AutoCAD SHX Text

RAMONA

AutoCAD SHX Text

FRY

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text L

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text G

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text C

AutoCAD SHX Text H

AutoCAD SHX Text A

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text K

AutoCAD SHX Text C

AutoCAD SHX Text T

AutoCAD SHX Text Y

AutoCAD SHX Text I

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text K

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text U

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

Addendum one.pdf
Account No. 435-CAZL-KS36-01
RFB-266-26
May 21, 2026
ADDENDUM #1

File details come from the government source that posted it. Updated .