Addendum 1 02142023

ADDENDUM NO. 1

February 14, 2023

ADDENDUM NO. 1

A NEW MULTI-PURPOSE FACILITY

Located on the

HEARD COUNTY HIGH SCHOOL CAMPUS

Franklin, Georgia

CHANGES TO SPECIFICATIONS:

SECTION 001000 – INSTRUCTIONS TO PROPOSERS

Page 001000-3/ Paragraph 1.16

DELETE THIS PARAGRAGH IN ITS ENTIRETY

[ 1.16 The Heard County……….combined Bid Form. ]

SECTION 002000 – REQUEST FOR PROPOSALS

Page 002000-1/ Fifth Paragraph

CHANGE TO READ:

[ There will be a mandatory pre-proposal meeting held on Wednesday, February 22, 2023 at 10:00 am, held at the Heard County School System Board Office, located at 131 East Court Square, Franklin, Georgia. Accommodations for a site visit to the project site for interested proposers will be discussed at the pre-proposal meeting. ]

SECTION 083310 – OVERHEAD COILING DOOR

Page 083310-3/ Paragraph 2.2. A. 1 & 2

CHANGE TO READ:

[ A. Door Curtains: Fabricate overhead coiling door curtain of interlocking slats in a continuous length for width of door without splices. Provide slats of material thickness recommended by door manufacturer for performance, size, and type of door indicated, and as follow:

1. Door Sections: 2 inches (51 mm) thick, sandwich construction consisting of rolled formed, commercial quality, flush 20 gauge exterior and ribbed 27 gauge interior steel skins, stucco embossed.

a. Door to have tongue and groove joint system with thermal breaks combined with EPDM seal between section joints.

b. Sections to be insulated with CFC free polyurethane foamed in place by means of a continuous process.

c. Door Section R-value of minimum 19.4.

d. End Stiles and steel at end hinge attachment reinforcement locations to be 14 gauge minimum combined thickness.

e. Interior skin of each section to have a continuous reinforcing strip, 20 gauge by 3-1/4” wide at top and bottom if section to provide for mounting of full sized hinges or hardware.

2. Finish: Door exterior and interior pre-painted steel consisting of a hot dipped galvanized coating applied to the base metal, a 0.2 mil baked on prime coat and a

0.8 mil baking on polyester top coat.

a. Exterior Color: As selected by the Owner from a full range of colors. ]

Page 083310-7/ Paragraph 2.7

DELETE:

[ 2.7 ALUMINUM FINISHES

A. Finish designations……..aluminum finishes.

B. Class II, Clear…………..with AAMA 607.1. ]

CHANGES TO DRAWINGS:

SHEET A1.01 (dated 01/20/2023)

REPLACE THIS SHEET IN ITS ENTIRELY WITH ATTACHED SHEET W/ REVISION

02/09/2023

SHEET A2.02 (dated 01/20/2023)

SHEET A3.01 (dated 01/20/2023)

SHEET A4.01 (dated 01/20/2023)

SHEET A9.03 (dated 01/20/2023)

SHEET A9.04 (dated 01/20/2023)

ATTACHMENTS:

Sheets A1.01, A2.02, A3.01, A4.01, A9.03, A9.04

END OF ADDENDUM NO. 1