ADDED DATA 61497921.pdf
PDF 99 KB Posted
- Attached to
- Gloves, Cut Resistant
- Solicitation number
- SPMYM226Q7900
About this file
This document is an Added Data specification sheet for a federal contract item detailing glove requirements.
The procurement specifies cut-resistant gloves identified by Document Number 61397921 and NIIN LLS054561. The gloves must meet or exceed ANSI Cut Level 3 and ANSI 105-2011 Dexterity Classification Level 3 minimum standards. Required construction features include rubber coating on the palm, fingers, and thumbs, and the gloves must be manufactured with UHMWPE/HPPE fibers for cut resistance. The gloves must display easily identifiable markings indicating cut resistance rating, which may be located on the back of the glove, the glove tag, or through other distinguishable markings. A critical restriction prohibits gloves colored solid yellow or orange. Contractors must provide ANSI Report of Test Data documenting both cut level and dexterity classification performance with the initial shipment to demonstrate compliance with specified standards.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - SPMYM226Q7900.pdf | ||
| ADDED DATA 61497902.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ADDED DATA
DOCUMENT NUMBER : 61397921 NIIN: LLS054561
GLOVES MUST BE MINIMUM OF ANSI CUT LEVEL THREE (3); HAVE EASILY IDENTIFIABLE
MARKINGS, VIA ANSI RATING ON BACK OF THE GLOVE OR ON THE GLOVE TAG OR OTHER
DISTINGUISHABLE MARKING TO CLASSIFY THAT THE GLOVE IS CUT RESISTANT; MUST MEET
MINIMUM OF ANSI 105-2011 DEXTERITY CLASIFICATION OF THREE (3); RUBBER COATING PALM, FINGER AND THUMBS. GLOVES CANNOT BE SOLID YELLOW OR ORANGE IN COLOR. ANSI
REPORT OF TEST DATA FOR CUT LEVEL AND DEXTERITY CLASSIFICATION IS REQUIRED FOR
INITIAL SHIPMENT. MUST CONTAIN (UHMWPE/HPPE) FIBERS.
File details come from the government source that posted it. Updated .