ADC-RR196-T-1-Attachment4.pdf
PDF 68 KB Posted
- Attached to
- RR-196 Training and Combat Chaff Federal contract opportunity
- Solicitation number
- FA821323R3019
About this file
This document provides requirements for ammunition data cards (ADCs) and lot numbering under a solicitation from the Department of the Air Force Materiel Command Lifecycle Management Center. The contractor must develop and submit ADCs in accordance with MIL-STD-1168 and the Worldwide Ammunition Data Repository Program user manual for each lot of training and combat chaff items produced, whether accepted or rejected by the Government. ADCs are required for specific assemblies, subassemblies, components, explosives, pyrotechnics and propellants for the end item. Component ADCs must also be provided for certain identified components. Lot numbers must follow MIL-STD-1168 conventions and technical data package requirements for all end items, major components and inert or dummy items. Component ADCs are encouraged for items purchased from subcontractors. All component review from vendor/engineering change proposals must be listed on ADCs. A sample ADC is due 30 days prior to first article testing or production.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA821323R30190002.pdf | ||
| FA821323R30190001.pdf | ||
| SPI.pdf | ||
| FAT-260-T1-NY02.pdf | ||
| FAT-260-CY94.pdf | ||
| Rework-Repair-Attachment5.pdf | ||
| FAT-Attachment8.pdf | ||
| ADC-RR196-Attachment4.pdf | ||
| CDRLS.pdf | ||
| MSE-Attachment9.pdf | ||
| AirSpec.pdf | ||
| EDL-196-CY94.pdf | ||
| 1653.pdf | ||
| FA821323R3019.pdf | ||
| 807CY94.pdf | ||
| 158.pdf | ||
| 807NY02.pdf | ||
| EDL-T1-NY02.pdf | ||
| SOW.pdf |
Show all 19
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 4 - AMMUNITION DATA CARDS
Detailed requirements and guidance for the preparation of Ammunition Data Cards (ADCs) and Ammunition Lot Numbers are contained in MIL-STD-1168, DI-MISC-80043 and the Worldwide Ammunition-data Repository Program (WARP) online user’s manual.
Detailed requirements for obtaining and using a manufacturer’s identification symbol, which is an integral component of the ammunition lot number, can be found in MIL-STD-1168 and the WARP user’s manual. Information provided in paragraphs 6.7 through
6.16 of MIL-STD-1168 shall be considered mandatory requirements where all instances of the term “should” are considered to be replaced with the word “shall.”
(a) The contractor shall develop and submit ADCs in accordance with the requirements of this clause, MIL-STD-1168, and the user’s manual located on the WARP database. The WARP application is accessed through the Munitions History Program (MHP) website. (Refer to the clause in Section C of this contract entitled “Statement of Work - Ammunition Data Cards, Report of Contractor Ballistic/Function Testing” for more information.) The ADC requirement is a flow-down requirement that applies to contractors and their suppliers, vendors or subcontractors.
(b) The contractor shall prepare an ADC for each lot of item(s) being produced under this contract, regardless of whether or not those lots are accepted or rejected by the Government. The ADC shall comply with MIL-STD-1168 and WARP requirements.
(c) Unless otherwise authorized by the Procuring Contracting Officer, the contractor shall include, in the components sections on the ADC representing the deliverable item, as a minimum; all assemblies, sub-assemblies, components, explosives, pyrotechnics and propellants listed below for the item being procured.
End Item Component Listing:
Drawing Number: 200735374 Rev A Nomenclature: Cartridge Liner
Drawing Number: 200735375 Nomenclature: Chaff Paper
Drawing Number: 200735376 Nomenclature: Chaff
Drawing Number: 200535757 Nomenclature: Glass
Drawing Number: 200535757 Nomenclature: Aluminum
Drawing Number: 200735373 Rev A Nomenclature: End Cap
Drawing Number: 200535753 Nomenclature: Felt
Drawing Number: 200535759 Nomenclature: Piston
Drawing Number: 200535752 Nomenclature: Potting Compound
(d) The component items identified below are from paragraph (c) above and will require their own component ADC in addition to being listed on the end item ADC. The component ADCs shall also comply with MIL-STD-1168 and WARP requirements.
Drawing Number from paragraph (c) above -3-, components as follows:
(e) Lot numbers shall be in accordance with MIL-STD-1168 lot number convention and the technical data package requirements.
Lot numbers shall be used for all ammunition end items and their major components, including inert, dummy, or non-energetic items and components. When not required by technical data package and not an end item or major component, the component lot number may be constructed through contractor lot number convention.
(f) The flowdown of the requirement for component ADCs generated via WARP is highly encouraged for other items not identified in paragraph (d) above when the prime contractor is purchasing components, assemblies, and subassemblies from subcontractors or vendors.
(g) All component RFV/ECPs shall be listed on the ADC for the deliverable item, as well as on the component ADC, when that component is identified in paragraph (d) above. The WARP user’s manual provides information on the level of detail required.
(h) A sample ADC shall be developed and submitted to the WARP system 30 days prior to First Article testing or 30 days prior to production in the event a first article is not required. The WARP ADC program will not allow the submission of additional ADCs until such time as the sample ADC has been approved in the system.
Attachment 4 - AMMUNITION DATA CARDS
File details come from the government source that posted it. Updated .