Adam_Weiss.docx
DOCX document 16 KB Posted
- Attached to
- ADAM WEISS PEAK PIPELINE MATERIALS Federal contract opportunity
- Solicitation number
- 140L6224Q0057
About this file
This document appears to be a Q&A response related to a federal contract opportunity for furnishing pipe materials. The key details are:
The solicitation is for ADAM WEISS PEAK PIPELINE MATERIALS, with Solicitation Number 140L6224Q0057. The contract is for materials only, to be furnished as per the specifications and material list. The agency issuing the solicitation is the Department of the Interior Bureau of Land Management Wyoming Region.
The Q&A response addresses several questions about the pipe pressure ratings and diameter requirements specified in the bid schedule. The responses clarify that 333 PSI DR-7 pipe is acceptable for the 2" diameter line items, and 250 PSI DR-9 pipe is acceptable for the 1-1/2" diameter line items. The request for 22,965 total linear feet on Line 1 is clarified to be 12 rolls at 2,000 feet per roll.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140L6224Q0057_Amd_0001.pdf | ||
| Statement_of_Work.docx | DOCX document | |
| Sol_140L6224Q0057.pdf | ||
| Bid_Schedule_revised.docx | DOCX document | |
| A06__Material_List_revised.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Adam Weiss Amendment Questions (answered in RED)
1. For Part 2, Line D: “2” Diameter HDPE pipe DR-11, 400 PSI.” From what our vendors communicate with us, the highest PSI available in 2” Diameter HDPE pipe is 333 PSI (DR 7). Can you please verify that you will require that pipe to handle 400 PSI, as I am not aware that any manufacturer makes 2” HDPE pipe that will handle that 400 psi pressure rating? Will 333 PSI DR-7 pipe meet the requirements for this line item?
The 2"- 333psi- DR-7 pipe would be sufficient
2. For the 1-1/2” Diameter piping in Part 2, line B I just want to clarify that 250 PSI pipe is DR-9 (not 11). I assume I am correct in bidding DR-9, 250 PSI pipe for that
Correct, the 1-1/2" 250psi pipe should be 1-1/2"- DR-9- 250psi pipe
3. Part 2, Line C: You reference a pressure rating requirement of 335 PSI. This one is related to question 1 above. The highest pressure rating HDPE pipe that I am aware of has a pressure rating of 333 PSI (DR-7). Will 333 PSI pipe meet the requirements for this line?
The 333psi DR-7 pipe would be sufficient
4. For line one, is the request for 22,965 total rolls at 2000’ per roll, or is the request for 22,965 divided by 12 rolls, which would be 1,914 rolls?
The request for line 1 is for 12 rolls @ 2,000ft per roll (The exact feet as stated in the table (22,965) is not relevant to the request. The requested total feet will be 24,000ft with 12 rolls @ 2,000ft per roll)
5. Line# 2 : The DR standard according to the Pressure settings should be DR-9 Correct, Line #2 should be for 1-1/2"- DR-9- 250psi pipe
6. Line# 3 : The DR standard according to the Pressure settings should be DR-7 Correct, Line #3 should be for 1-1/2"- DR-7- 333psi pipe
7. Line# 4 & 5 : Could you kindly confirm the ratio required. HD-6 is not a standard rating.
Line #4 should be for 2"- DR-7- 333psi pipe;
Line #5 should be for 2"- DR-11- 200psi pipe.
File details come from the government source that posted it. Updated .