A8e A003 CDRL Monthly Progress Reports - RV3_dh sig sent to COR.pdf

PDF 97 KB Posted

Attached to
Procurement request for Landing Craft Air Cushion (LCAC) 100 Class Composite Propeller Blade Analysis
Solicitation number
N0016726Q1156
Issued by

About this file

This file is a PDF display error message, not a federal contract document. The document failed to render properly and contains only Adobe Reader troubleshooting instructions and trademark information. No contract opportunity details, solicitation information, or procurement requirements are present in this file. The user should obtain a properly formatted version of the intended document to access the actual contracting information.

View the file

Other files

Show all 11

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Please wait...

If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.

You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download.

For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.

Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

PREVIOUS EDITION MAY BE USED.

DD FORM 1423, FEB 2024

Page of (Updated 20250617)

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoDM 5010.12 for detailed instructions.)

DD FORM 1423, FEB 2024

Page of (Updated 20250617)

CONTRACT DATA REQUIREMENTS LIST

C. CATEGORY:

14. DISTRIBUTION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES Draft Final Reg Repro

16. REMARKS

14. DISTRIBUTION

15.TOTAL

Image of arrow pointing towards totals

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package; TM - Technical Manual; Other - other category of data, such as "Provisioning," "Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support (e.g., Mission Design Series (MDS) designator).

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Name of preparer of CDRL.

Item H. Date CDRL was prepared and signature of preparer of CDRL.

Item I. Name of CDRL approval authority.

Item J. Date CDRL was approved and signature of CDRL approval authority.

Item 1. See DFARS Subpart 204.71 for proper numbering. To add or delete additional data items, point and click the plus or minus sign to the right of Block J.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Identify only one Data Acquisition Document No. If a single work task generates more than one deliverable data product, prepare a separate data item for each deliverable data product.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work/Performance Work Statement paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data and computer software, specify the contractor's requirement to mark the appropriate distribution statement on the technical data or computer software (ref. DoDI 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15. Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14; Desired medium for delivery of the data item.

Identify for which data item additional remarks are provided. When tailoring the Data Acquisition Document invoked in Item 4, identify which portions of that Document are being tailored.

Identify any referenced attachments to the form. Attachments can be added using the button at the bottom of page 1.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government’s rights to use the data shall be governed by the pertinent provisions of the contract.

9.0.0.2.20120627.2.874785 DD Form 1423, "Contract Data Requirements List"

CurrentPage:
PageCount:
Select Classification from drop-down list.: 1
CUI Indicator Information:
Click on this button to attach a file(s).:
A. CONTRACT LINE ITEM NUMBER: TBD
exhibit: A
C. CATEGORY: Select for "TDP.": 0
C. CATEGORY: Select for "TM.": 0
C. CATEGORY: Select for "OTHER.": 1
C. CATEGORY: Enter specification for "Other.": MGMT
System: LCAC 100 Propeller Blade Analysis & On-Craft Spt
ContractNum: TBD
Contractor: Materials Sciences LLC.
1. DATA ITEM NUMBER: A003
titleDataItem: Contract Status Report
subtitle: Monthly Progress Report for STA Analysis & On-Craft Spt
4. AUTHORITY (Data Acquisition Document Number): DI-MGMT-81991
contractRef: PWS Section 3.5.2
reqOffice: NSWCCD Code 655/PMS317
7. DD 250 REQUIREMENT: No
8. APPROVAL CODE : N/A
9. DISTRIBUTION STATEMENT REQUIRED: D
freq: MTHLY
asOfDate: 15
dateFirstSub: 30DAC
dateSubseqSub: See Block 16
16. REMARKS: CONTENT:

Monthly Progress Reports must include the report date, a detailed summary of analysis objectives or tasks achieved, a detailed summary of on-craft test support objectives or tasks achieved, and a detailed summary of challenges and mitigation efforts for those tasks. The analysis summary must include analysis predicted displacements, strains, and stresses relevant to the root cause analysis and design update, and planned analysis tasks for the following month. The on-craft test support summary must include date and location for events, propeller blade serial numbers, a summary and interpretation of test results and information, and assessment of events and blade damage if applicable.

BLOCK 9: DISTRIBUTION STATEMENT D. : Distribution authorized to the Department of Defense and U.S. DoD contractors only, CTI (July 2026). Other requests for this document shall be referred to Carderock Division, Naval Surface Warfare Center (Code 65), West Bethesda, MD 20817-5700.

BLOCKS 11 & 13: Monthly Progress Reports are due the 15th of each month throughout the duration of the performance period of PWS paragraphs 3.1-3.3.

Submission Formats and Instructions: The Monthly Progress Report shall be electronically provided to the contract Technical Points of Contact (TPOC): Daniel C. Hart, daniel.c.hart.civ@us.navy.mil, (301) 503-2459 and Robert E. Cole, robert.e.cole1.civ@us.navy.mil, (850) 896-7586. Reports shall be handled as up to CONTROLLED UNCLASSFIED INFORMATION (CUI). Electronic delivery to be per secure transmission means, i.e., DOD SAFE, or equivalent.

Click to add continuation field for Remarks:
14. DISTRIBUTION - a. ADDRESSEE, new line: NSWCCD TPOC
14. DISTRIBUTION - a. ADDRESSEE, new line: NSWCPCD TPOC
15.TOTAL - Total draft copies is automatically calculated.: 0
15.TOTAL - Total draft copies is automatically calculated.: 0
15.TOTAL - Total draft copies is automatically calculated.: 0
15.TOTAL - Total final regular copies is automatically calculated.: 1
15.TOTAL - Total final regular copies is automatically calculated.: 1
15.TOTAL - Total final regular copies is automatically calculated.: 2
15.TOTAL - Total final reproducible copies is automatically calculated.: 0
15.TOTAL - Total final reproducible copies is automatically calculated.: 0
15.TOTAL - Total final reproducible copies is automatically calculated.: 0
priceGrp:
estTotalPrice:
remarks:
preparedBy: D. Hart
J. SIGNATURE: H. SIGNED ON 20260730
J. SIGNATURE: J. SIGNATURE
J. SIGNATURE:
approvedBy: Sheila Riggs
Click to add additional data items.:
Click to delete additional data items.:

File details come from the government source that posted it. Updated .