A3 EIE389 Kitchen Appliance Specifications.pdf

EIE389 SATELLITE DINING FACILITY KITCHEN EQUIPMENT BID PACKAGE

ITEM 3 - HIGH DENSITY SHELVING (1 REQ'D)

Metro Model LOT

CONSISTS OF THE FOLLOWING:

32 ea Model MQ2442G MetroMax Q™ Shelf, 42"W x 24"D, removable open grid polymer shelf mats on an epoxy coated steel frame with quick adjust corner releases, (4) wedge connectors, Microban® antimicrobial product protection, 800 lb. capacity per shelf, NSF

1 kt Model MQTTE24 MetroMax Q™ Top-Track Stationary End Unit Kit, 24"W, includes: (8) 86"H epoxy coated steel posts, hardware necessary for connecting stationary end units to track (shelves sold separately), NSF

1 st Model TTS17NA Super Erecta®, MetroMax Q™ Top-Track Track Set, 17 ft., includes:

necessary sections of track for assembling track runs (only (1) track set is required between stationary units), NSF

6 kt Model MQTTM24C MetroMax Q™ Top-Track Mobile Unit Kit, 24"W, includes: (4) MQ74UPE 74"H epoxy coated steel posts, chrome plated rigid casters, caster channels, bumpers & roller assemblies (shelves sold separately), NSF

ITEM 4 - WIRE SHELVING UNIT (2 REQ'D)

Eagle Group Model S4-74-2448C Dimensions: 74(h) x 48(w) x 24(d) Starter Shelving Unit, 4-tier, 48"W x 24"D x 74"H, wire shelves with patented QuadTruss® design, (4) 74"H posts, chrome-plated finish, KD, NSF

ITEM 6 - DUNNAGE RACK (2 REQ'D)

New Age Model 2005 Dimensions: 12(h) x 48(w) x 20(d) Dunnage Rack, 48"W x 20"D x 12"H, all welded aluminum construction, 1-1/2" x 1-3/4" x 0.070 tubing, welded aluminum caps on feet, weight capacity 2500 lbs., NSF, Made in USA 2 ea Lifetime warranty against rust & corrosion, 5 year construction warranty, standard

ITEM 7 - CAN RACK (1 REQ'D)

New Age Model 1256CK Dimensions: 77.25(h) x 26(w) x 47(d) Can Storage Rack, mobile design with casters, sloped glides for automatic can retrieval, aluminum construction, holds 216-#10 or 297-#5 cans, (4) 6" plate casters, (2) swivel with brakes, (2) rigid, NSF, Made in USA 1 ea Lifetime warranty against rust & corrosion, 5 year construction warranty, standard

ITEM 14 - FREEZER SHELVING (1 REQ'D)

Eagle Group Model LOT

CONSISTS OF THE FOLLOWING:

2 ea Model S4-63-2448E Starter Shelving Unit, 4-tier, 48"W x 24"D x 63"H, wire shelves with patented QuadTruss® design, (4) 63"H posts, EAGLEgard® hybrid epoxy finish with MICROGARD® antimicrobial protection, KD, NSF (One each unit reduced to 57” tall)

6 ea Model S4-63-2460E Starter Shelving Unit, 4-tier, 60"W x 24"D x 63"H, wire shelves with

MICROGARD® antimicrobial protection, KD, NSF

1 ea Model S4-63-1448E Starter Shelving Unit, 4-tier, 48"W x 14"D x 63"H, wire shelves with

ITEM 21 - COOLER SHELVING (1 REQ'D)

Eagle Group Model LOT

CONSISTS OF THE FOLLOWING:

3 ea Model S4-63-2448E Starter Shelving Unit, 4-tier, 48"W x 24"D x 63"H, wire shelves with

MICROGARD® antimicrobial protection, KD, NSF (One each unit reduced to 57” tall)

6 ea Model S4-63-2460E Starter Shelving Unit, 4-tier, 60"W x 24"D x 63"H, wire shelves with

ITEM 23 - WASTE COLLECTOR (1 REQ'D) NO SUBSTITUTION

Salvajor Model S914 Dimensions: 35.88(h) x 24.81(w) x 22.25(d) Scrap Collector™, scrapping, pre-flushing & collecting system (widely accepted in areas where disposers are restricted), NEMA 4 HYDROLOGIC® control panel with patented operator sensor, two water saving modes (timed run & auto start/stop), safety line disconnect, LCD readout, salvage basin & silverware trap, scrap basket, 3/4 HP corrosion-resistant pump, pump intake screen, stainless steel construction, UL, CSA, CE, NSF

1 ea Collector top is available to ship to the fabricator in advance of unit (additional shipping charges will apply). Please provide instructions on order 1 ea 460v/60/3-ph, 1.5 amps

ITEM 24 - SHELVING, WALL MOUNTED (1 REQ'D)

Eagle Group Model WS12120-14/3 Dimensions: 120(w) x 12(d) Shelf, wall-mounted, 120"W x 12"D, rolled frontedge, 1-1/2"H up-turn on sides & rear, includes stainless steel mounting brackets stud welded to shelf, 14/304 stainless steel construction, NSF

ITEM 26 - FOOD PROCESSOR (1 REQ'D)

Hobart Model FP150-1 Dimensions: 20.25(h) x 8.25(w) x 18.63(d) Food Processor - Unit Only, angled continuous feed design, full-size hopper, 14 lb per/min production cap., 420 rpm, stainless steel cutting surfaces, planetary gear transmission, triple safety interlocks, aluminum housing, rubber feet, 120/60/1, 1/2 HP, 4.8 amps, UL, NSF 1 ea Model 15DELI-6PACK (6) Plates & Storage Rack, consisting of: (1) 15SLICE-1/16-SS,

(1) 15SLICE-5/32-SS, (1) 15JUL-5/64-SS, (1) 15SHRED-7/32-SS, (1) 15SFTSLCE-3/8,

(1) DICEGRD-3/8 & (2) WALL-RACK

ITEM 28 - ROLL-IN REFRIGERATOR (1 REQ'D)

Traulsen Model RRI232HUT-FHS Dimensions: 89.13(h) x 68(w) x 35.96(d) Spec-Line Refrigerator, Roll-in, two-section, self-contained refrigeration, stainless steel exterior and interior, standard depth cabinet, full-height doors, accepts 72" high racks (by others) with INTELA- TRAUL™, 1/2 HP, cULus, NSF 1 ea 115v/60/1ph, 11.4 amps, NEMA 5-15P, standard 1 ea 3 year service/labor & 5 year compressor warranty, standard 1 ea Left door hinged left/right hinged right, standard

ITEM 30 - REFRIGERATOR RACK, ROLL-IN (4 REQ'D)

New Age Model 1335 Dimensions: 64(h) x 20.38(w) x 26(d) Roll-In Refrigerator/Proofer Rack, universal, open frame design, 64"H, wide angle slides for (18) 18" x 26" pans, slides on approximately 3" centers, all welded aluminum construction, end loading, (4) 5" platform casters, (2) swivel, (2) swivel with brakes, NSF, Made in USA 4 ea Lifetime warranty against rust & corrosion, 5 year construction warranty, standard

ITEM 34 - REACH-IN REFRIGERATOR (1 REQ'D)

Traulsen Model RHT232WUT-HHS Dimensions: 83.25(h) x 58(w) x 35(d) Spec-Line Refrigerator, Reach-in, two-section, 51.6 cu. ft., self-contained refrigeration, stainless steel exterior and interior, standard depth, wide half-height door or doors with Santoprene® EZ-Clean Gaskets,

(3) adjustable wire shelves per section, INTELA-TRAUL™ microprocessor controls, 6" adjustable stainless steel legs, 5/8 HP, cULus, NSF, ENERGY STAR® 1 ea 115v/60/1ph, 8.2 amps, with cord & NEMA 5-15P, standard 1 ea 3 year service/labor, 5 year compressor warranty, standard

2 ea Additional coated shelf on pins (max 9)

ITEM 34.1 - REACH-IN REFRIGERATOR (1 REQ'D)

Spec-Line Refrigerator, Reach-in, two-section, 51.6 cu. ft., self-contained refrigeration, stainless steel exterior and interior, standard depth, wide half-height door or doors with Santoprene® EZ-Clean Gaskets,

(3) adjustable wire shelves per section, INTELA-TRAUL™ microprocessor controls, 6" adjustable stainless steel legs, 5/8 HP, cULus, NSF, ENERGY STAR® 1 ea 115v/60/1ph, 8.2 amps, with cord & NEMA 5-15P, standard 1 ea 3 year service/labor, 5 year compressor warranty, standard 1 ea Both doors hinged on left 2 ea Additional coated shelf on pins (max 9)

ITEM 36 - WRAP STATION (1 REQ'D)

Hobart Model 625A-1 Table Top Wrap Station, 18" max width stretch film, solid state controlled hot rod cutoff bar, aluminum base, stainless steel surface, rubber feet, 115v/60/1-ph, 6.5 amps, ETL Listed, cUL 1 ea Standard warranty - 1-Year parts, labor & travel time during normal working hours within the USA

ITEM 37 - WORK TABLE, STAINLESS STEEL TOP (1 REQ'D)

Eagle Group Model T3084SE-BS Dimensions: 39.63(h) x 84(w) x 30(d) Spec-Master® Series Work Table, 84"W x 30"D, 4-1/2"H backsplash, 14/300 series stainless steel top, rolled front edge, adjustable 18/300 series stainless steel undershelf with marine edge, Uni-Lok® gusset system, (4) stainless steel legs & adjustable bullet feet, NSF

ITEM 38 - SANDWICH / SALAD PREPARATION REFRIGERATOR (1 REQ'D)

Randell Model 9200-513 Dimensions: 36(h) x 60(w) x 33(d) Refrigerated Counter/Sandwich Top, reach-in, two-section, 14.67 cu. ft. capacity, 60"W x 33"D, side-mounted self-contained refrigeration, (2) 24" solid hinged self-closing doors, (10) 1/6 size pan capacity, cutting board, stainless steel exterior, aluminum interior, 1/3 HP, cUL, UL, NSF, Made in USA 1 ea (1) year parts, (90) day labor & (1) year compressor warranty, standard 1 ea Self-contained refrigeration standard 1 ea 115v/60/1-ph, 9.0 amps, 8' cord, NEMA 5-15P, standard 1 ea 6" Legs, standard

ITEM 41 - ROLL-IN HEATED CABINET (1 REQ'D)

Traulsen Model RIH232L-FHS Dimensions: 83.25(h) x 68(w) x 35.56(d) Spec-Line Heated Cabinet, Roll-in, two-section, stainless steel exterior and interior, standard depth cabinet, full-height doors, accepts 66" high rack (by others) with INTELA-TRAUL™, cULus, NSF, ENERGY STAR®

1 ea 208-230/115v/60/1ph, 15.5 amps, 3000 watts, direct, standard 1 ea 3 year service/labor warranty, standard

ITEM 42 - MEAT SLICER (1 REQ'D)

Hobart Model HS8N-1 Dimensions: 25.5(h) x 24.63(w) x 30.31(d) Heavy Duty Meat Slicer, manual, 13" CleanCut™ knife, anodized finish with (6) interlocks, removable meat grip assembly, removable ring guard cover, single action top mounted sharpener with Borazon™ stones, cleaning kickstand, 1/2 hp motor, 5.4amps, 120v/60hz/1-ph NSF cETLus 1 ea Standard warranty - 1-Year parts, labor & travel time during normal working hours within the USA

ITEM 43 - WORK TABLE, STAINLESS STEEL TOP (1 REQ'D)

Eagle Group Model T3072SE Dimensions: 36.13(h) x 72(w) x 30(d) Spec-Master® Series Work Table, 72"W x 30"D, 14/300 series stainless steel top, rolled edge on front & back, adjustable 18/300 series stainless steel undershelf with marine edge, Uni-Lok® gusset system, (4) stainless steel legs & adjustable bullet feet, NSF 1 st Model CA4-SB Table Casters, set of (4), 4" diameter, (2) swivel & (2) swivel/brake, 115 lbs. capacity per caster, zinc with resilient tread, NSF

ITEM 45 - WIRE SHELVING UNIT (1 REQ'D)

Eagle Group Model S4-74-2460C Dimensions: 74(h) x 60(w) x 24(d) Starter Shelving Unit, 4-tier, 60"W x 24"D x 74"H, wire shelves with patented QuadTruss® design, (4) 74"H posts, chrome-plated finish, KD, NSF

ITEM 47 - POT RACK (1 REQ'D)

Eagle Group Model CM72PR Dimensions: 18(h) x 64(w) x 20(d) Pot Rack, ceiling mount, 64"W x 20"D x 18"H, triple-bar design, constructed of 3/16" x 2" stainless steel flat bar, includes (18) double-pronged pot hooks & 24" plated chains for mounting

ITEM 51 - POT RACK (1 REQ'D)

Eagle Group Model CM84APR Dimensions: 18(h) x 76(w) x 20(d) Pot Rack, ceiling mount, 76"W x 20"D x 18"H, triple-bar design, constructed of 3/16" x 2" aluminum flat bar, includes (21) double-pronged pot hooks & 24" plated chains for mounting

ITEM 52 - UNIVERSAL PAN RACK (1 REQ'D)

New Age Model 1306 Dimensions: 69.75(h) x 20.38(w) x 26.38(d) Rack, mobile, universal, open frame design, square tube construction, (20) universal slides, 3" centers, all-welded aluminum construction, end loading, slides for 12" x 20", 18" x 26" & 13" 18" pans, 3-1/4" wide runners, (4) 5" platform casters, NSF, Made in USA 1 ea Lifetime warranty against rust & corrosion, 5 year construction warranty, standard

ITEM 53 - INGREDIENT BIN (2 REQ'D)

Cambro Model IBS27148 Dimensions: 28(h) x 16.31(w) x 29.63(d) Ingredient Bin, mobile, 27 gallon capacity, 1-pc seamless polyethylene bin, 2-pc sliding polycarbonate lid, S-hook on front (scoop NOT included), (4) 3" heavy duty casters (2 front swivel, 2 fixed), white with clear cover, NSF

ITEM 54 - REACH-IN REFRIGERATOR (2 REQ'D)

Spec-Line Refrigerator, Reach-in, two-section, 51.6 cu. ft., self-contained refrigeration, stainless steel exterior and interior, standard depth, wide half-height door or doors with Santoprene® EZ-Clean Gaskets,

(3) adjustable wire shelves per section, INTELA-TRAUL™ microprocessor controls, 6" adjustable stainless steel legs, 5/8 HP, cULus, NSF, ENERGY STAR® 2 ea 115v/60/1ph, 8.2 amps, with cord & NEMA 5-15P, standard 2 ea 3 year service/labor, 5 year compressor warranty, standard 2 ea Left door hinged left/right hinged right, standard 4 ea Additional coated shelf on pins (max 9)

ITEM 57 - COMBI OVEN, ELECTRIC (4 REQ'D)

RATIONAL Model B628106.43 Dimensions: 29.75(h) x 42(w) x 38.25(d) (SCC 62 E 480V) SelfCooking Center® Combi Oven/Steamer, electric, (6) 18" x 26" full size sheet or (12) 12" x 20" full size hotel pan capacity, iCookingControl with 7 modes, HiDensityControl®, iLevelControl, Efficient CareControl, Combi-Steamer with 3 modes, core temp probe with 6 point measurement, hand shower with automatic retracting system, (3) grid shelves, ethernet interface, 480v/60/3-ph, 31.5 amps,

22.1 kW (dual voltage: retrofitable to 440v/60/3-ph, 29.0 amps, 22.1 kW), cULus, NSF, ENERGY STAR® 4 ea NOTE: All discounts subject to approval by manufacturer 4 ea 2 years parts and labor, 5 years steam generator warranty 4 ea Model CAP Chef Assistance Program, a RATIONAL certified Chef conducts 4 hours/location specialized application training with personnel, no charge 4 ea Model 8720.1552US Installation Kit, for electric SCC WE/CMP 61 (208/60/3 & 240/60/3);

electric SCC WE/CMP 101 (440/60/3 & 480/60/3); electric SCC WE/CMP 62 (440/60/3 &

480/60/3) THIS ITEM IS NON-DISCOUNTABLE, USA ONLY (NET)

2 ea Model 60.74.149 Combi-Duo Open Stacking Kit, Mobile, casters, for electric or gas SCC 62 or CMP 62 stacked on electric SCC 62, SCC 102, CMP 62, or CMP 102

ITEM 58 - WATER FILTRATION SYSTEM (2 REQ'D)

Everpure Model EV979722 Dimensions: 25.5(h) x 20.5(w) x 7(d) KleenSteam® II Twin System, total system for boiler base steamers, 5.0 gpm flow rate, deliming (2) 7CB5 carbon filter, SS-10 scale inhibitor Cartridge, dip tube, pressure gauge, water shut-off valve & wall bracket 2 ea Note: This system requires (2) cartridges.

ITEM 61 - KETTLE CABINET ASSEMBLY, ELECTRIC (1 REQ'D)

Groen Model 142838 Dimensions: 43.63(h) x 36(w) x 34.25(d) Kettle Cabinet Assembly, electric boiler, (2) 20 quart kettles, hand tilt with support arm, 2/3 jacket, mounted on 36" stainless steel cabinet with removable doors, 5" wide drain trough, includes: swing faucet & steam trap, stainless steel construction, 36.0 kW/hr, UL, NSF 1 ea (1) year parts & labor, (10) year kettle & body warranty, standard 1 ea (153255) 480v/60/3-ph, 44.0 amps 2 ea Model Z001108 Cover, lift-off, for TDB/6-10 & TDC/3-20, 10 or 20 quart table top kettle 1 ea Model Z001120 Basket Insert, for TDC/3-20 - 20 quart kettle 1 ea Model Z091877 Faucet, double pantry, with 11" rear swing spout & 5" riser

ITEM 64 - WASTE COLLECTOR (1 REQ'D) NO SUBSTITUTION

Salvajor Model S914 Dimensions: 35.88(h) x 24.81(w) x 22.25(d) Scrap Collector™, scrapping, pre-flushing & collecting system (widely accepted in areas where disposers are restricted), NEMA 4 HYDROLOGIC® control panel with patented operator sensor, two water saving modes (timed run & auto start/stop), safety line disconnect, LCD readout, salvage basin & silverware trap, scrap basket, 3/4 HP corrosion-resistant pump, pump intake screen, stainless steel construction, UL, CSA, CE, NSF

1 ea Collector top is available to ship to the fabricator in advance of unit (additional shipping charges will apply). Please provide instructions on order 1 ea 460v/60/3-ph, 1.5 amps

ITEM 65 - SINK HEATER (1 REQ'D) NO SUBSTITUTION

Hatco Model 3CS-9B Dimensions: 12.63(h) x 8(w) x 17.13(d) Sink Heater, electric, undersink design, electric operation, stainless steel front, for over 21" square sink area, 9.0 kW (balanced), NSF, cULus, Made in USA 1 ea NOTE: Sale of this product must comply with Hatco's Minimum Resale Price Policy;

consult order acknowledgement for details 1 ea NOTE: Includes 24/7 parts & service assistance, call 800-558-0607 1 ea Model 3CS-480V 480v/50/60/3-ph (Available at time of purchase only)

ITEM 66 - OVERSHELF (1 REQ'D)

Eagle Group Model WSP12120 Dimensions: 120(w) x 12(d) Overshelf, wall mount with pot rack, 120"W x 12"D, rolled front edge, 1-1/2"H up-turn on sides & rear, 304 stainless steel pot rack bar, includes (10) double-prong stainless steel hooks, 16/430 stainless steel, construction, NSF

ITEM 76 - EQUIPMENT STAND, FOR MIXER / SLICER (1 REQ'D)

Eagle Group Model MMT3030S Dimensions: 34.5(h) x 30(w) x 30(d) Mixer Stand, mobile, 30"W x 30"D, 14/300 series stainless steel top with marine edge, 400 lbs capacity, pan rack slides for (6) 18" x 26" pans, Uni-Lok® gusset system, stainless steel crossbracing on sides & rear, stainless steel legs, (2) swivel & (2) swivel/brake 4" casters

ITEM 77 - CONVEYOR OVEN (1 REQ'D)

Ovention Model CONVEYOR C2000-1 Dimensions: 20.25(h) x 48.1(w) x 36.22(d) Precision Impingement™ Conveyor Cook Oven, ventless, 20” X 20” cavity dimension, rapid cook alternative, 48.10” Belt (without wings), digital display interface, variable speed motor, built-in self diagnostics, cool to touch covers and panels, stainless steel front, top, sides and back cool touch exterior, stainless steel interior, USB menu upload capability, internal catalytic filtration, 44 amps, 208- 240v/60hz/1-ph, NEMA 6-50P, UL, NSF, cUL, Made in USA 1 ea (1) Year parts & labor warranty, standard

ITEM 78 - COMPACT PREP TABLE REFRIGERATOR (1 REQ'D)

Traulsen Model UPT4812-LL Dimensions: 35.88(h) x 48(w) x 33.75(d) Dealer's Choice Compact Prep Table Refrigerator with roll-top lid which serves as an overshelf, Reach-in, two-section, 48" wide, holds (12) 1/6 pans 4" deep (included), can accommodate up to 6" deep pans, stainless steel exterior top, sides & door with Santoprene® EZ-Clean Gasket, hinged left/left, anodized aluminum interior, galvanized exterior back and bottom, rear-mounted self-contained refrigeration, (4) 4" casters, 1/5 HP, cULus, NSF 1 ea 3 year parts & labor and 5 year compressor warranty, standard 1 ea 115v/60/1ph, 7.5 amps, 8' cord, NEMA 5-15P

ITEM 82 - EQUIPMENT STAND, REFRIGERATED / FREEZER BASE (1 REQ'D)

Randell Model FX-1CS-290 Dimensions: 23.2(h) x 48(w) x 33(d) FX Series Flexible Refrigerator or Freezer Chef Stand, 48" W, 3.0 cubic feet, single drawer with removable ABS insert, self-contained refrigeration with electronic control (40° refrigerator, -5° freezer), stainless steel finished top, front, sides & interior, casters, R290 Hydrocarbon refrigerant, 1/4 HP, UL, NSF, cUL , Made in USA 1 ea (1) year parts, (90) day labor & (1) year compressor warranty, standard 1 ea Self-contained refrigeration standard 1 ea 115v/60/1-ph, 1.7 amps, NEMA 5-15P, standard

ITEM 83 - GRIDDLE, ELECTRIC, COUNTERTOP (1 REQ'D)

Vulcan Model RRE48E Dimensions: 15.3(h) x 48(w) x 31.5(d) Rapid Recovery™ Heavy Duty Griddle, electric, countertop, 48" W x 24" D cooking surface, 3/4" thick composite griddle plate with stainless steel cooking surface, bottom mounted snap action thermostat every 12", stainless steel front, sides, front top ledge, front grease trough, 4" back & tapered side splashes, 4" adjustable legs, cCSAus, NSF 1 ea 1 year limited parts & labor warranty, standard 1 ea 480v/60/3-ph, 29.8amps, 21.6kW

ITEM 84 - ELECTRIC FLOOR FRYER (2 REQ'D)

Pitco Frialator Model SE14 Solstice™ Fryer, electric, floor model, full frypot, 40 - 50 lb. oil capacity, solid state controls, melt cycle, boil out capacity, drain valve interlock switch, stainless steel tank, front & sides, 17.0kW, ENERGY

STAR®, UL, NSF, CE, GS

2 ea 1 year parts and labor warranty from the date of installation up to a maximum of 15 months from the date of manufacture (with appropriate documentation), standard 2 ea 480v/50/60/3-ph, 21.0 amps, 17 kW, DIRECT 2 ea (SSTC) Solid State Controller, standard 2 ea Model P6072145 Basket, (2) oblong/twin size, 13-1/2" x 6-1/2" x 5-1/2" deep, long handle, regular mesh (shipped std (n/c) with models "T" SG14, SG14R, SSH55, SE14, SE14X, SE14B, SG14T, 35+, 45+, fryer batteries shipped with (1) per fryer

2 st Model B3901504 Casters, 9" adjustable swivel (set of 4) non-lock rear & lock front casters, solstice supreme, SG, SE, VF and flat bottom fryers, pasta cookers, rethermalizers, BNB

ITEM 85 - FRYER DUMP STATION (1 REQ'D)

Pitco Frialator Model BNB-SE14 Solstice™ Bread & Batter Cabinet, with BNB dump station, fryer match design, approximately 15-5/8" wide, includes 4-5/8" recessed pan and screen, standard finish, stainless steel front, sides & door, for prepackage system SE14 electric fryers, NSF 1 ea 1 year parts and labor warranty from the date of installation up to a maximum of 15 months from the date of manufacture (with appropriate documentation), standard 1 st Model B3901504 Casters, 9" adjustable swivel (set of 4) non-lock rear & lock front casters, ALL Solstice BNB's

ITEM 86 - REACH-IN FREEZER (1 REQ'D)

Traulsen Model RLT132WUT-FHS Dimensions: 83.25(h) x 29.88(w) x 35(d) Spec-Line Freezer, Reach-in, one-section, 24.2 cu. ft., self-contained refrigeration, stainless steel exterior and interior, standard depth, wide full-height door or doors with Santoprene® EZ-Clean Gaskets, (3) adjustable wire shelves per section, INTELA-TRAUL™ microprocessor controls, unit can be programmed to operate at -10 degrees fahrenheit 1 ea 0 degrees Fahrenheit holding temperature, standard 1 ea 115v/60/1ph, 9.4 amps, with cord & NEMA 5-15P, standard 1 ea 3 year service/labor, 5 year compressor warranty, standard 1 ea Door hinged on left 1 ea Additional coated shelf on pins (max 9)

ITEM 87 - HOT FOOD WELL UNIT, DROP-IN, ELECTRIC (2 REQ'D)

Alto-Shaam Model 400-HWILF/D6 Dimensions: 9.31(h) x 57.31(w) x 27.06(d) Halo Heat® Hot Food Well Unit with large flange, Drop-In, Electric, (4) 12" x 20" full-size pan capacity (pans NOT included), 6-3/8" deep well, holds 6" deep pans, (4) adjustable thermostatic controller, stainless steel construction, EcoSmart®, cULus, UL EPH ANSI/NSF 4, CE, IP X3, TUV NORD 2 ea NOTE: Subject to Manufacturer’s Terms & Conditions. See Documents Section 2 ea 208-240v/50/60/1-ph, 8.7-10.0 amps, 1.8-2.4kW, 9 ft. cord, NEMA 6-15P 2 ea Cord located on back of control box, standard

ITEM 88 - SNEEZE GUARD, STATIONARY (2 REQ'D)

English Manufacturing Model AMA-101A-3 Sneezeguard, Self-Serve/Full-Service, adjustable, 61-120" long, 22" high posts 1" OD with brushed stainless steel finish (2) end posts (1) center post (4) 3/8" clear tempered glass panels with polished edges and 1" radius corners

ITEM 91 - DISPLAY MERCHANDISER, HEATED, FOR MULTI-PRODUCT (2 REQ'D)

Hatco Model GR3SDH-39 Dimensions: 13.75(h) x 39.25(w) x 27.25(d) Glo-Ray® Designer Horizontal Display Warmer, (14) rods, free-standing, (1) shelf, adjustable thermostat, hardcoated heated base, heated glass shelf, stainless steel or designer colors, 1505 watts, cULus, UL EPH Classified, ANSI/NSF 4, Made in USA 1 ea NOTE: Sale of this product must comply with Hatco's Minimum Resale Price Policy;

consult order acknowledgement for details 1 ea NOTE: Includes 24/7 parts & service assistance, call 800-558-0607 2 ea One year on-site parts and labor warranty, plus one additional year parts only warranty on all Glo-Ray metal sheathed elements 2 ea One year parts warranty on Glo-Ray halient ribbon elements against burnout 2 ea One year parts warranty on heated glass shelves against burnout or breakage 2 ea 120v/60/1-ph, NEMA 5-15P 2 ea Model BLACK Black, designer color, body & shelf (Available at time of purchase only) 2 st Model 4"LEGS 4-inch adjustable legs, set of 4

ITEM 92 - SERVING COUNTER (1 REQ'D)

Fabricated Model CUSTOM

CUSTOM FABRICATED, BAA COMPLIANT

SIZE PER PLANS, AND TO BE FIELD VERIFIED PRIOR TO PRODUCTION BY EQUIPMENT

SUPPLIER. SHOP DRAWINGS REQUIRED.

16 GA 304 STAINLESS STEEL TOP

STAINLESS STEEL CABINET BASE CONSTRUCTION

OPEN FRONT (OPERATOR SIDE) CABINET BASE

MIDSHELF ON LH SIDE

ENCLOSED FINISHED BACK (CUSTOMER SIDE)

ENCLOSED FINISHED SIDES

6" STAINLESS ADJUSTABLE LEGS

STAINLESS TOE KICK ON CUSTOMER SIDE AND BOTH ENDS

TOP CUTOUTS AND STRUCTURE FOR ITEM 87 HOT FOOD WELLS (2EA)

APRON FRONT FOR ITEM 87 CONTROL PANELS

UNDERSTRUCTURE FOR MOUNTING ITEM 88 SNEEZE GUARD

INTEGERAL CONDUIT, JUNCTION BOXES AND OUTLETS FOR ITEMS 87 AND 91.

ITEM 93 - REFRIGERATED SELF-SERVICE CASE (2 REQ'D)

Structural Concepts Model CO47R Dimensions: 79.75(h) x 47.25(w) x 33(d) Oasis® Self-Service Refrigerated Case, 47-1/4"W, 79-3/4"H, Breeze-E (Type II) with EnergyWise self-contained refrigeration system, Blue Fin coated coil, (4) non-lit adjustable metal shelves, top light, black interior, one piece formed ABS plastic tub, (2) full end panels, 4"D removable wall spacer brackets, casters, cETLus, ETL-Sanitation 2 ea NOTE: If GFCI is required, a GFCI breaker MUST be used in lieu of a GFCI receptacle 2 ea NOTE: 34" Minimum entry door clearance required (with out shipping skid & with rear spacer bracket removed) 2 ea 1 yr. parts & labor warranty, 5 yr. compressor warranty, standard 2 ea Breeze-E (Type II) with EnergyWise refrigeration - NSF Type II compliant, standard 2 ea 208-240v/60/1ph, 10.23 amps, standard 2 ea 6 ft straight blade power cord NEMA 6-20P (base exit), standard 2 ea NOTE: Compressor air intake from front & out rear, unit MUST remain 4" from wall & front panel cannot be blocked (Not applicable with remote refrigeration option) 2 ea Base Support: Casters, with levelers, standard 2 ea Exterior: Wilsonart or Formica NON-PREMIUM laminate (Color chart available from factory rep or access color selections via www.wilsonart.com or www.formica.com) 2 ea NOTE: SCC will not be responsible for additional charges incurred for Premium or other

Manufacturer's laminate selections not originally quoted 2 ea Lower front panel: Black, standard 2 ea Left end panel: Full with mirrored interior, vinyl edging, standard 2 ea Right end panel: Full with mirrored interior, vinyl edging, standard 2 ea Back Panel: Solid back panel, black, painted, standard 2 ea Digital fahrenheit thermometer, standard 2 ea Add Lights (LED) to standard shelves (4) 2 ea Roll-down security cover, locking (requires two end panels (full or cutaway) per case) but

CANNOT be used with Case to Case acrylic end panel)(must be chosen when case is ordered)

ITEM 94 - PASS-THRU REFRIGERATOR (1 REQ'D)

Traulsen Model G21004P Dimensions: 83.44(h) x 52.13(w) x 37.94(d) Dealer's Choice Display Refrigerator, Pass-thru, two-section, self-contained refrigeration with microprocessor control, front half height glass doors (left/right hinged), rear half height glass doors (left/right hinged), stainless steel front, lights, anodized aluminum sides & interior, (3) epoxy coated shelves per section (factory installed), LED interior lights, 6" high casters, 5/8 HP, cULus, NSF 1 ea 3 year parts & labor and 5 year compressor warranty, standard 1 ea 115v/60/1ph, 9.6 amps, NEMA 5-15P, standard

ITEM 97 - POS COUNTER (1 REQ'D)

Custom

CUSTOM FABRICATED, BAA COMPLIANT

SIZE PER PLANS, AND TO BE FIELD VERIFIED PRIOR TO PRODUCTION BY EQUIPMENT

SUPPLIER. SHOP DRAWINGS REQUIRED.

16 GA 304 STAINLESS STEEL TOP

STAINLESS STEEL CABINET BASE CONSTRUCTION

OPEN FRONT (OPERATOR SIDE) CABINET BASE WITH MIDSHELF

ENCLOSED FINISHED BACK (CUSTOMER SIDE)

ENCLOSED FINISHED SIDES

6" STAINLESS ADJUSTABLE LEGS

STAINLESS TOE KICK ON CUSTOMER SIDE AND BOTH ENDS

INTEGERAL CONDUIT, JUNCTION BOXES AND OUTLETS FOR POS STATIONS

ITEM 98 - BEVERAGE COUNTER (1 REQ'D)

Custom

CUSTOM FABRICATED, BAA COMPLIANT

SIZE PER PLANS, AND TO BE FIELD VERIFIED PRIOR TO PRODUCTION BY EQUIPMENT

SUPPLIER. SHOP DRAWINGS REQUIRED.

16 GA 304 STAINLESS STEEL TOP

STAINLESS STEEL CABINET BASE CONSTRUCTION

OPEN FRONT (OPERATOR SIDE) CABINET BASE WITH MIDSHELF

ENCLOSED FINISHED BACK (CUSTOMER SIDE)

ENCLOSED FINISHED SIDES

LH SIDE SPLASH, 5" TALL

6" STAINLESS ADJUSTABLE LEGS

STAINLESS TOE KICK ON CUSTOMER SIDE AND BOTH ENDS