A26-078 Hydraulic Fluid Dispensers - 02 - Item Description - Revised 7 April 2026.pdf
PDF 134 KB Posted
- Attached to
- HYDRAULIC FLUID DISPENSER
- Solicitation number
- FA812526Q0055
About this file
This is a Memorandum for Record documenting an item description and procurement request from the 76th Aircraft Maintenance Group (AMXG) at Tinker Air Force Base, Oklahoma for hydraulic fluid dispensing equipment dated 7 April 2026.
The Air Force Sustainment Center (AFMC) is requesting the purchase of three (3) MALABAR Hydraulic Fluid Dispensers Model 877600B-6 or equivalent commercial-of-the-shelf (COTS) items. The equipment specifications require trailer-mounted dispensers compatible with 55-gallon drums for supplying BMS 3-11 Type IV and V hydraulic fluids. Key technical requirements include three 16-inch foam-filled wheels (four wheels permitted if front axle remains steerable), pintle hook trailer hitch, parking brake, filter rating of 5-15 microns, air inlet rating of 70-110 psig, and air motor with hydraulic pump assembly featuring a minimum fluid delivery rate of 4.5 gallons per minute and pressure relief valve. The hand pump must deliver a minimum of 7 fluid ounces per stroke. The equipment shall feature Skydrol-resistant paint finish and include nitrogen racks with regulator, two 3600 psig nitrogen bottles with CGA680 valves, and accessories consisting of hand pump, hose reel, static reel, liquid level gauge, and fluid meter. A 35-foot minimum fluid delivery hose with 3/8" outer diameter, flareless tube female fitting (6 9/16"-18 UNJF 3B) for aircraft connection, and shutoff valve at the hose end is required. The dispensers must include service manual, parts list, and operating instructions.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CSS HYDRAULIC FLUID DISPENSER.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)
TINKER AIR FORCE BASE OKLAHOMA
7 April 2026
MEMORANDUM FOR RECORD
SUBJECT: Item Description, A26-078 Hydraulic Fluid Dispensers
1. The 76th Aircraft Maintenance Group (AMXG) is requesting utilization of funds for the purchase of three (3) MALABAR Hydraulic Fluid Dispensers Model 877600B-6 or equivalent.
2. The requested specifications are outlined below.
MALABAR Hydraulic Fluid Dispensers Model 877600B-6 or Equivalent
a. Quantity: 3 each
b. Shall be a Commercial of the Shelf (COTS) item
c. Shall include three 16-inch diameter foam filled wheels
(1) Four wheels are allowed as long as the front axle can be turned with the tow bar.
(2) Tires shall be foam filled. Inflation points may still be on the tires as the method to apply foam
d. Shall be compatible with a 55-gallon drum
e. Equipment shall be compatible with supplying BMS 3-11 Type IV and V fluid
f. Shall have a filter rating of 5-15 Microns
g. Shall include air inlet rating of 70-110 psig
h. Shall be trailer mounted
i. Shall include a pintle hook trailer hitch
j. Shall include a parking brake
k. Shall include air motor and hydraulic pump assembly with pressure relief valve
l. Hydraulic pump fluid delivery rate shall be a minimum of 4.5 gpm
m. Hand pump fluid delivery rate shall be a minimum of 7 fluid ounce per stroke
n. Shall have a standard finish using Skydrol resistant paint
o. Shall include Nitrogen racks with a Nitrogen regulator
p. Shall include two (2) 3600 psig Nitrogen bottles with CGA680 valves
q. Shall include these accessories:
(1) Hand Pump
(2) Hose Reel
(3) Static Reel
(4) Liquid Level Gauge
(5) Fluid Meter
r. Shall include a fluid delivery hose with these conditions:
(1) Minimum length 35 ft
(2) 3/8” OD
(3) Shall include a flareless tube female fitting size - 6 9/16”-18 UNJF 3B for aircraft connection
(4) Shutoff Valve at hose end
s. Shall include a service manual
t. Shall include a parts list
u. Shall include operating instructions
File details come from the government source that posted it. Updated .