A24-058 KC-135 DIT-MCO RTIC - Item Descr Rev 9-26-24_Redacted.pdf

331 KB Posted

Attached to
DIT-MCO RTIC Upgrade
Solicitation number
A24-058
Issued by

About this file

Written by GovTribe AI ·

This document is a memorandum from the Department of the Air Force Headquarters Air Force Sustainment Center (AFMC) at Tinker Air Force Base requesting the purchase of DIT-MCO RTIC Upgrade equipment.

The key details are: The AMXG Group requires five new custom sets of wiring harness adapter cables to support testing and validation of the Real Time In Cockpit (RTIC) Modification's wiring harnesses with the DIT-MCO 2635 testing system. The cables must be permanently labeled and consist of individual cable harness sections as referenced in the "RTIC Itemized Wiring Harness Table." Technical schematics/drawings must be provided. A site visit to Tinker AFB is required to install, test, evaluate, and validate the new cables on a live aircraft. A user manual with instructions for connecting and utilizing the new cables with the DIT-MCO 2635 test system must be provided. The items shall be shipped and delivered to Tinker AFB.

View the file

Other files

File Type Posted
A24-058 KC-135 DIT-MCO RTIC - SOW revised 9-26-24_Redacted.pdf PDF
A24-058 KC-135 DITMCO RTIC - SSJ REV 10-4-24_Redacted.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DEPARTMENT OF THE AIR FORCE

HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)

TINKER AIR FORCE BASE OKLAHOMA

26 September 2024

MEMORANDUM FOR RECORD

SUBJECT: Item Description, A24-058 DIT-MCO RTIC Upgrade.

1. The AMXG Group is requesting utilization of funds for the purchase of DIT-MCO RTIC Upgrade.

2. The requested equipment item descriptions/specifications are outlined below.

DIT-MCO RTIC Upgrade Requirements

• Develop and manufacture five new custom sets of wiring harness adapter cables to support testing and validation of the Real Time In Cockpit (RTIC) Modification's "Mod" wiring harnesses with the DIT-MCO 2635 testing system.

• All cables shall be permanently labeled with the following:

___ Manufacturers name and cable part number.

___ Each cable end shall have either; the Unit Under Test “UUT” connector part number or the MSU or ESU port number.

• The five-wiring harness adapter cable sets shall consist of individual cable harness sections as referenced in (but not limited to) the “RTIC Itemized Wiring Harness Table” shown below.

• Cable sets shall connect the DIT-MCO 2635 test system to the RTIC wiring harnesses and fully enable the full range of testing capabilities, of the

DIT-MCO 2635 test System, to be performed on the aircraft under test.

• Technical schematics and/or Engineering drawings shall be provided for each unique cable set.

• Minimum of 1-day (8-hour) site visit(s) to Tinker AFB to install, test, evaluate, and validate the new custom wiring harness adapter cables on a live aircraft undergoing PDM maintenance.

• Date and time of visit shall be determined by and coordinated with 76 AMXG/MXDEA Engineering to minimize disruptions to Production.

• A basic written user manual with instructions/diagrams for connecting and utilizing the new custom wiring harness adapter cable sets with the DIT-MCO 2635 test system to complete the RTIC wiring continuity checks, shall be provided both digitally and via a finalized master copy on a CD.

• Items shall be shipped and delivered to Tinker AFB.

File details come from the government source that posted it. Updated .