A21 - (A) Combined Synopsis-Solicitation - MURDEN VFDS - W912PM26QA005 - Final.pdf

Combined Synopsis/Solicitation – MURDEN VFDS, NEW HANOVER COUNTY, NC

Solicitation No. W912PM26QA005. This solicitation is issued as an RFQ.

Date of Solicitation: 03 November 2025

This is a combined synopsis/solicitation for the acquisition of commercial items prepared in accordance with the format in FAR Subpart 12.6 – Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a separate written solicitation will not be issued.

This solicitation is being issued under the authority of FAR Part 13 Simplified Acquisition Procedures. This combined synopsis/solicitation is being issued as a small business set-aside.

This solicitation is a Request for Quote (RFQ). This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2025-06 effective October 01, 2025. The associated North American Industry Classification System (NAICS) code for this procurement is 334513 with a size standard of 750 Employees.

The U.S. Army Corps of Engineers, Wilmington District needs a contractor to furnish all labor, materials, and services to provide the U.S. Army Corps of Engineers, Wilmington District Dredge Murden with (6) VFD’s Variable frequency drives, along with the Installation, Programing, and setup for four (4) of the VFD drives on the Dredge vessel Murden.

The resulting award issued from this request will result in one award. Service Contract Act Wage Determination 2015-4397 Rev. 29 dated 07-08-2025 for New Hanover County, NC will apply. The Offeror is responsible for referring to the wage determination and applying it as applicable.

The solicitation can only be changed by formal written amendment issued by the Contracting Officer. The duration of the site visit will be one (1) day only with no make-up dates allowed.

The following documents have been provided:

A21 - (A) Combined Synopsis-Solicitation – MURDEN VFDS - W912PM26QA005 – Final

A21 - (B) - SOW_MU_VFD_11-03-2025

A21 - (C) WD 2015-4397, Rev 29, dated 07-08-2025

QUESTIONS ARE DUE NOT LATER THAN 4:00 PM, EST, 10 November 2025.

QUOTES ARE DUE NOT LATER THAN 2:00 PM, EST, 17 November 2025.

SUBMIT QUESTIONS & QUOTES ELECTRONICALLY via email to BOTH diana.d.curl@usace.army.mil and rosalind.m.shoemaker@usace.army.mil. It is your responsibility to follow up and ensure quotes have been received by the Contract Specialist prior to the due date and time for quotes.

INSTRUCTIONS

Please read the instructions and all solicitation documents very carefully before submitting your bids.

All Quote Submission Packages must include the following items:

• Signed Offer as well as signed amendments if issued.

• Technical Proposal per clause 52.212-2 of the solicitation:

mailto:diana.d.curl@usace.army.mil mailto:rosalind.m.shoemaker@usace.army.mil

Evaluation of Award: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. Issuance of award will be made to the lowest price offeror that is technically acceptable.

Price Quote and Technical Proposal: Each offeror must submit both a Price Quote of each line item and a Technical Proposal via email. The technical proposal shall include information that clearly demonstrates the ability to meet all requirements set out in the Statement of Work (SOW). The Contractor shall include the technical information that is listed in provision 52.212-2 within the solicitation for submittal requirements. No hard copies will be accepted or evaluated. Both the Price Quote and Technical Proposal must be received by the closing date and time set forth within the solicitation. In an effort to reduce paper and cost, all quotes shall be submitted electronically. All submissions shall be in Adobe PDF format and shall be on 8 ½ x 11 size pages in no less than 10 pitch or 10 fonts. Offerors may use compression utility software such as WinZip or PKZip to reduce fie size and facilitate electronic transmission.

Title your file(s) in the following format:

W912PM26QA005_COMPANY NAME_PRICING

W912PM26QA005_COMPANY NAME_TECHNICAL

SAM Registration: Each prospective awardee shall be registered and be active in the System for Award Management (SAM) database prior to award. If the Offeror does not become registered to receive contracts with an active Cage Code and show as active to receive contract awards in the SAM database in the time prescribed by the Contracting Officer (NLT due date/time of solicitation), the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. Offerors may obtain information on registration and annual confirmation requirements via the Internet at https://www.sam.gov/portal/public/SAM/ or by calling 866-606-8220, Monday – Friday from 8am – 8pm EST. On-line Representations and Certifications may also be filled out at this website.

The Government reserves the right to cancel this solicitation.

This announcement and written Request for Quote constitutes the only “Request for Quote” that will be made for this requirement.

https://www.sam.gov/portal/public/SAM/

INSTRUCTIONS CONTINUED

OFFEROR TO COMPLETE BLOCKS 3, 6, 7, 9, 10, and 11 below as well as pricing on page 6.

1. Issued By:

U.S. ARMY CORPS OF ENGINEERS

Attn: Rosalind Shoemaker and Diana Curl

69 Darlington Avenue

Wilmington, North Carolina 28403-1343

2. This Acquisition is a small business set-aside under NAICS Code 334513, size standard of 750 Employees.

3. Discount Terms:

4. Method of Solicitation: RFQ

5. The Solicitation incorporates by reference FAR 52.212-1, 52.212-3, 52.212-4, and 52.212.5. Addenda are attached.

6. Contractor/Offeror:

COMPANY NAME:

COMPANY POC:

ADDRESS:

PHONE:

CAGE: UNIQUE ENTITY ID:

7. Total Price Base and All Option Years:

8. The Contractor Is Required To Sign This Document And Return 1 Copy The Issuing Office. The Contractor Agrees To Furnish And Deliver All Items Set Fort Or Otherwise Identified Above And On Any Additional Sheets Subject To The Terms And Conditions Specified Herein.

9. Signature of Offeror/Contractor:

10. Name and Title of Signer (Type or Print)

11. Date Signed:

Solicitation/Contract Form Continuation

Murden Variable Frequency Drives (VFD)

W912PM26QA005

Continuation of Supplies or Services and Prices/Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price

Amount

Variable Frequency Drive ALBR20GEAGD156JA0NNNNN A-B

20GEAGD156JA0NNNNN P OWERFLEX TS XT 755 AC DR

Claimant Program Code: C9E Pricing Arrangement: Firm Fixed Price

3 Each

ALBR207502262D2RA-B 20-750-2262D-2RPF750-115V I/O

Claimant Program Code: C9E Pricing Arrangement: Firm Fixed Price

3 Each

ALBR20HIMA6A-B 20-HIM-A6 20-HIM-A6 PACKAGED

Claimant Program Code: C9E Pricing Arrangement: Firm Fixed Price

3 Each

VFD - P/N - ALBR20GE1GD034JA0NNNNNA-B 20GE1GD034JA0NNNNN

POWERFLEX TS XT 755 AC DR

Claimant Program Code: C9E Pricing Arrangement: Firm Fixed Price

3 Each

VFD - P/N - ALBR20GE1GD034JA0NNNNNA-B 20GE1GD034JA0NNNNN

POWERFLEX TS XT 755 AC DR

Claimant Program Code: C9E Pricing Arrangement: Firm Fixed Price

3 Each

ALBR20HIMA6A-B 20-HIM-A6 20-HIM-A6PACKAGED

Claimant Program Code: C9E Pricing Arrangement: Firm Fixed Price

3 Each

Installation

Claimant Program Code: C9E Pricing Arrangement: Firm Fixed Price

1 Job

Travel

Claimant Program Code: C9E Pricing Arrangement: Firm Fixed Price

1 Job

Continuation of Description

Requirements Murden VFDs

Product Service Code: J020

Product Service Code: J020

Product Service Code: J020

Product Service Code: J020

Product Service Code: J020

Product Service Code: J020

Product Service Code: J020

Product Service Code: V231

Continuation of Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Statement of Work

DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Donald Wiggins Email: donald.o.wiggins@usace.army.mil Telephone: 910-251-4048

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Statement of Work

DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Donald Wiggins Email: donald.o.wiggins@usace.army.mil Telephone: 910-251-4048

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Statement of Work

DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Donald Wiggins Email: donald.o.wiggins@usace.army.mil Telephone: 910-251-4048

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Statement of Work

DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Donald Wiggins Email: donald.o.wiggins@usace.army.mil Telephone: 910-251-4048

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Statement of Work

DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Donald Wiggins Email: donald.o.wiggins@usace.army.mil Telephone: 910-251-4048

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Statement of Work

DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Donald Wiggins Email: donald.o.wiggins@usace.army.mil Telephone: 910-251-4048

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Statement of Work

DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Donald Wiggins Email: donald.o.wiggins@usace.army.mil Telephone: 910-251-4048

Inspection and Acceptance Location

Both Destination

Instructions: In accordance with the Statement of Work

DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Donald Wiggins Email: donald.o.wiggins@usace.army.mil Telephone: 910-251-4048

Continuation of Deliveries or Performance

Delivery On Or Before Delivery Date 30 Jan 2026

Line Item Delivery Schedule Quantity Address and POC

Delivery On Or Before Delivery Date 30 Jan 2026

3 Each Place of Performance DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Stephen Capps Email: stephen.m.capps@usace.army.mil Telephone: 910-352-6997

Delivery On Or Before Delivery Date 30 Jan 2026

3 Each Place of Performance DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Stephen Capps Email: stephen.m.capps@usace.army.mil Telephone: 910-352-6997

Delivery On Or Before Delivery Date 30 Jan 2026

3 Each Place of Performance DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Stephen Capps Email: stephen.m.capps@usace.army.mil Telephone: 910-352-6997

Delivery On Or Before Delivery Date 30 Jan 2026

3 Each Place of Performance DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Stephen Capps Email: stephen.m.capps@usace.army.mil Telephone: 910-352-6997

Delivery On Or Before Delivery Date 30 Jan 2026

3 Each Place of Performance DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Stephen Capps Email: stephen.m.capps@usace.army.mil Telephone: 910-352-6997

Delivery On Or Before Delivery Date 30 Jan 2026

3 Each Place of Performance DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Stephen Capps Email: stephen.m.capps@usace.army.mil Telephone: 910-352-6997

Delivery On Or Before Delivery Date 30 Jan 2026

1 Job Place of Performance DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Stephen Capps Email: stephen.m.capps@usace.army.mil Telephone: 910-352-6997

Delivery On Or Before Delivery Date 30 Jan 2026

1 Job Place of Performance DoDAAC: W912PM CountryCode: USA

W074 ENDIST WILMINGTON

KO CONTRACTING DIVISION, 69 DARLINGTON AVENUE

WILMINGTON, NC 28403-1343

UNITED STATES

Stephen Capps Email: stephen.m.capps@usace.army.mil Telephone: 910-352-6997

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.204-13 System for Award Management Maintenance. Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020 52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services. Nov 2023 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

(DEVIATION 2024-O0013 REVISION 1)

May 2024 Deviation 2024-O0013 May 2024

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.204-7020 NIST SP 800-171 DoD Assessment Requirements. Nov 2023 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7001 Buy American and Balance of Payments Program. Feb 2024 252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

Jun 2023

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018 252.232-7010 Levies on Contract Payments. Dec 2006 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.246-7003 Notification of Potential Safety Issues. Jan 2023 252.246-7008 Sources of Electronic Parts. Jan 2023 252.247-7023 Transportation of Supplies by Sea. Oct 2024

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO) /International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD.

All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232- 7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com /site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ____, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders — Commercial Products and Commercial Services

FAR Clauses Incorporated by Full Text

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services.

(DEVIATION 2025-O0003 and 2025-O0004)

(Oct 2025) Deviation 2025-O0004 (Mar 2025)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (MAR 2025) (DEVIATION 2025-O0003 and 2025-O0004)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, Title VII, (Jan 2017) of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec (Section 1634 of Pub. L. 115-91).2023)

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(Nov 2021) (a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations .(Nov 2015)

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (31 U.S.C. 3903 and 10 U.S.C. 3801).(Mar 2023)

(6) 52.233-3, Protest After Award (31 U.S.C. 3553).(Aug 1996)

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).(Oct 2004)

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ .]Contracting Officer check as appropriate

52.203-6, Restrictions on Subcontractor Sales to the Government with (41 U.S.C. 4704 and 10 U.S.C. 4655).(1) (Jun 2020), Alternate I (Nov 2021)

52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509)).(2) (Nov 2021)

52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Section 1553 of Pub. L. 111-5). (3) (Jun 2010) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the (4) (Nov 2023) Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Pub. L. 109-282) ( 31 U.S.C. 6101 note).(5) X (Jun 2020)

[Reserved].(6)

52.204-14, Service Contract Reporting Requirements (Pub. L. 111-117, section 743 of Div. C).(7) (Oct 2016)

52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Pub. L. 111-117, section 743 of Div. C).(8) (Oct 2016)

52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(9) X (Jun 2023)

52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-(10) Agency Contracts. (Pub. L. 115-390, title II).(Dec 2023)

(11)

(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(Dec 2023)

Alternate I of 52.204-30.(ii) (Dec 2023)

(12) X 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. ( 2025) (31 U.S.C. 6101 note).Jan

52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (41 U.S.C. 2313).(13) (Oct 2018)

[Reserved].(14)

52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award ( ) (15 U.S.C. 657a).(15) Oct 2022

52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns ( ) (if the offeror elects to waive the preference, (16) Oct 2022 it shall so indicate in its offer) (15 U.S.C. 657a).

[Reserved](17)

(18)

(i) 52.219-6, Notice of Total Small Business Set-Aside (15 U.S.C. 644).X (Nov 2020)

Alternate I of 52.219-6.(ii) (Mar 2020)

(19)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (15 U.S.C. 644).(Nov 2020)

Alternate I of 52.219-7.(ii) (Mar 2020)

52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637(d)(2) and (3)).(20) ( )Jan 2025

(21)

(i) 52.219-9, Small Business Subcontracting Plan (15 U.S.C. 637(d)(4)).( )Jan 2025

Alternate I of 52.219-9.(ii) (Nov 2016)

Alternate II of 52.219-9.(iii) (Nov 2016)

Alternate III of 52.219-9.(iv) (Jun 2020)

Alternate IV of 52.219-9.(v) ( )Jan 2025

(22)

(i) 52.219-13, Notice of Set-Aside of Orders (15 U.S.C. 644(r)).(Mar 2020)

Alternate I of 52.219-13.(ii) (Mar 2020)

52.219-14, Limitations on Subcontracting ( ) (15 U.S.C. 657s).(23) Oct 2022

52.219-16, Liquidated Damages-Subcontracting Plan (15 U.S.C. 637(d)(4)(F)(i)).(24) (Sep 2021)

52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible (25) Under the SDVOSB Program ( ) (15 U.S.C. 657f).Feb 2024

(26)

(i) 52.219-28, Small Business Program Rerepresentation (15 U.S.C. 632(a)(2)).X Postaward ( )Jan 2025

Alternate I of 52.219-28.(ii) (Mar 2020)

52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns ( ) (27) Oct 2022 (15 U.S.C. 637(m)).

52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned (28) Small Business Program ( ) (15 U.S.C. 637(m)).Oct 2022

52.219-32, Orders Issued Directly Under Small Business Reserves (15 U.S.C. 644(r)).(29) (Mar 2020)

52.219-33, Nonmanufacturer Rule (15 U.S.C. 637(a)(17)).(30) (Sep 2021)

52.222-3, Convict Labor (E.O.11755).(31) X (Jun 2003)

(32) X 52.222-19, Child Labor-Cooperation with Authorities and Remedies (E.O. 13126).(Jan 2025)

[Reserved](33)

[Reserved](34)

(35)

(i) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(Jun 2020)

Alternate I of 52.222-35.(ii) (Jul 2014)

(36)

(i) 52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).X (Jun 2020)

Alternate I of 52.222-36.(ii) (Jul 2014)

52.222-37, Employment Reports on Veterans ( ) (38 U.S.C. 4212).(37) Jun 2020

52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496).(38) (Dec 2010)

(39)

(i) 52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O. 13627).X (Nov 2021)

Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(ii) (Mar 2015)

(40) 52.222-54, Employment Eligibility Verification (Executive Order 12989). (Not applicable to the acquisition of commercially (Jan 2025) available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

(41)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

Alternate I of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)(ii) (May 2008)

52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (42 U.S.C. 7671, ).(42) (May 2024) et seq.

52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (42 U.S.C. 7671, ).(43) (May 2024) et seq.

52.223-20, Aerosols (42 U.S.C. 7671, ).(44) (May 2024) et seq.

52.223-21, Foams (42 U.S.C. 7671, ).(45) (May 2024) et seq.

52.223-23, Sustainable Products and Services (MAR 2025) (DEVIATION 2025-O0004)) (7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, (46) X and 42 U.S.C. 7671l).

(47)

(i) 52.224-3 Privacy Training (5 U.S.C. 552 a).(Jan 2017)

Alternate I of 52.224-3.(ii) (Jan 2017)

(48)

(i) 52.225-1, Buy American-Supplies (41 U.S.C. chapter 83).(Oct 2022)

Alternate I of 52.225-1.(ii) (Oct 2022)

(49)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, (NOV 2023) 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

Alternate I [Reserved].(ii)

Alternate II of 52.225-3.(iii) (Jan 2025)

Alternate III of 52.225-3.(iv) (Feb 2024)

Alternate IV (Oct 2022) of 52.225-3.(v)

52.225-5, Trade Agreements (19 U.S.C. 2501, ., 19 U.S.C. 3301 note).(50) (NOV 2023) et seq

52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign (51) X (Feb 2021) Assets Control of the Department of the Treasury).

52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National (52) Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).(53)

52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (42 U.S.C. 5150).(54) (Nov 2007)

52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (E.O. 13513).(55) X (May 2024)

52.229-12, Tax on Certain Foreign Procurements .(56) (Feb 2021)

52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. 3805).(57) (Nov 2021)

52.232-30, Installment Payments for Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. 3805).(58) (Nov 2021)

52.232-33, Payment by Electronic Funds Transfer-System for Award Management (31 U.S.C. 3332).(59) X (Oct2018)

52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).(60)

52.232-36, Payment by Third Party (31 U.S.C. 3332).(61) (May 2014)

52.239-1, Privacy or Security Safeguards (5 U.S.C. 552a).(62) (Aug 1996)

52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (63) X (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).(Nov 2024)

52.242-5, Payments to Small Business Subcontractors (15 U.S.C. 637(d)(13)).(64) (Jan 2017)

(65)

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10 U.S.C. 2631).(Nov 2021)

Alternate I of 52.247-64.(ii) (Apr 2003)

Alternate II of 52.247-64.(iii) (Nov 2021)

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ ]Contracting Officer check as appropriate.

52.222-41, Service Contract Labor Standards (41 U.S.C. chapter67).(1) X (Aug 2018)

52.222-42, Statement of Equivalent Rates for Federal Hires (29 U.S.C. 206 and 41 U.S.C. chapter 67).(2) X (May 2014)

52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (3) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.(4) C. chapter 67).

52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain (5) Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (6) (May 2014) (41 U.S.C. chapter 67).

52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(7) X (Jan 2022)

52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(8) X (Jan 2022)

52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).(9)

52.247-69, Reporting Requirement for U.S.-Flag Air Carriers Regarding Training to Prevent Human Trafficking (49 U.S.C. 40118(g)).(10) (Jan 2025)

(d) . The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded Comptroller General Examination of Record using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509).(Nov 2021)

(ii) 52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712).(Nov 2023)

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec (Section 1634 of Pub. L. 115-91).2023)

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(Nov 2021) (a)(1)(A) of Pub. L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(Jun 2023)

(vii)

(A) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(Dec 2023)

(B) Alternate I of 52.204-30.(Dec 2023)

(viii) 52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting ( )Jan 2025 opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) [Reserved]

(x) [Reserved]

(xi) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(Jun 2020)

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(Jun 2020)

(xiii) 52.222-37, Employment Reports on Veterans (38 U.S.C. 4212).(Jun 2020)

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496). Flow down required in (Dec 2010) accordance with paragraph (f) of FAR clause 52.222-40.

(xv) 52.222-41, Service Contract Labor Standards (41 U.S.C. chapter 67).(Aug 2018)

(xvi)

(A) 52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O 13627).(Nov 2021)

(B) Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(Mar 2015)

(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xix) 52.222-54, Employment Eligibility Verification (E.O. 12989).(Jan 2025)

(xx) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(Jan 2022)

(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(Jan 2022)

(xxii)

(A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I of 52.224-3.(Jan 2017)

(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Section 862, as amended, of the National (Oct 2016) Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (42 U.S.C. 1792). Flow down required in accordance with (Jun 2020) paragraph (e) of FAR clause 52.226-6.

(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxvi) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).(Nov 2024)

(xxvii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down (Nov 2021) required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (MAR 2025) (DEVIATION 2025-O0003 and 2025-O0004)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, Title VII, (Jan 2017) of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec (Section 1634 of Pub. L. 115-91).2023)

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(Nov 2021) (a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations .(Nov 2015)

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (31 U.S.C. 3903 and 10 U.S.C. 3801).(Mar 2023)

(6) 52.233-3, Protest After Award (31 U.S.C. 3553).(Aug 1996)

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).(Oct 2004)

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement…