A2. HSL_Training_Blocks_TDP_11-1-7752.pdf

This document is a detailed technical drawing and specification sheet for concrete training blocks used in federal contracting. The drawing provides comprehensive engineering specifications for multiple training block assemblies ranging from 500 LB to 22,000 LB capacity, manufactured as monolithic concrete castings with integrated lifting eye provisions.

The specification details include concrete requirements with compressive strength of 5,000 PSI minimum in seven days using ASTM C33 aggregates and Portland cement, reinforcing steel conforming to ASTM A615 Grade 60, and minimum bend diameter specifications for rebar. The document specifies manufactured data requirements including nameplate markings with block weight, manufacturer identification, and unique serial numbers. Lift eye rod dimensions are provided in a detailed table with diameters ranging from 0.50 to 6.5 inches and corresponding block weights and rod lengths. The drawings show cross-sectional views and assembly configurations with primary and optional secondary lashing attachment points. Test procedures are mandated using MIL-STD-913 proof load testing on each block, with specified load factors and test loads detailed in accompanying tables. Material specifications include stainless steel plates per ASTM A240, cadmium-plated hardware per SAE/AMS-QQ-P-416, and zinc-coated fasteners per ASTM B633. The document references compliance with applicable AMS and ASTM standards for all components and includes recommendations for lift and tie-down facility configurations using steel-reinforced concrete T-slots for proper training block installation and load testing.