A18-129.pdf
PDF 49 KB Posted
- Solicitation number
- A18-129
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A18-129: Lightweight and Compact Beam Steering System for Tactical High Energy Lasers Systems
PROJECTED CMMC LEVEL REQUIREMENT:
N/A
TECHNOLOGY AREAS:
Sensors
MODERNIZATION PRIORITIES:
KEYWORDS:
Beam director, compact beam steering system, high energy laser, beam control
ADDITIONAL INFORMATION
OBJECTIVE:
To develop a lightweight and compact Beam Steering System (BSS).
DESCRIPTION:
In order to integrate HEL weapons onto SWaP constrained platforms, smaller and more lightweight beam steering systems are required. The BSS will be required to rapidly slew the HEL beam to the target and hold an aim point to microradian level precision to maintain the beam on the target. Additionally, it is required that the BSS be able to share an aperture with tracking cameras to minimize the overall size and cost of the laser system. Many modern HEL designs are not single wavelengths, and tracking illuminator lasers must operate at different wavelengths from the primary HEL through the same aperture, thus it is imperative that the proposed BSS have an acromatic response over a broad wavelength range. The proposed design should be able to eliminate or minimize effects like vibrational jitter (optical or mechanical in nature) and thermal lensing, while delivering an aberration free beam to the target over the full field of regard. Proposed designs should minimize Size, Weight and Power requirements. • Aimpoint holding accuracy: Threshold – 10 microradian; Objective – 1 microradian • Acromatic waveband:
Threshold – 900 nm to 1600 nm; Objective – 700 nm to 1700 nm • Field of regard: Threshold – 20 degrees; Objective
– 360 degrees • Clear aperture size: Threshold – 10 cm; Objective – 30 cm
PHASE I:
The phase I effort will result in careful analysis and design of a proposed system. The phase I effort will include a final report and an optical model using ray tracing software like Zemax or equivalent to analyze system aberrations and ensure compatibility with tracking systems. The design shall include details on how the beam steering will occur mechanically, optically, and electronically.
PHASE II:
During phase II, the phase I designs will be utilized to fabricate, test and evaluate a breadboard system. The designs will then be modified as necessary to produce a final prototype. The final prototype will be thoroughly tested in a laboratory environment to fully characterize the performance of the final system.
PHASE III DUAL USE APPLICATIONS:
High energy DoD laser weapons offer benefits of graduated lethality, rapid deployment to counter time-sensitive targets, and the ability to deliver significant force either at great distance or to nearby threats with high accuracy for minimal collateral damage. Future laser weapon applications will range from very high power devices used for air defense (to detect, track, and destroy incoming rockets, artillery, and mortars) to modest power devices used for counter-ISR. The phase III effort would be to design, build and integrate a compact BSS into a helicopter HEL weapon system. The US Army Space and Missile Defense Technical Center as part of its Directed Energy research would execute military funding for this Phase III effort.
REFERENCES:
M. Ostaszewski, S. Harford, N. Doughty, C. Hoffman, M. Sanchez, D. Gutow, and R. Pierce, "Risley prism beam pointer," Proc. SPIE 6304, 630406 (2006).
1.
I. Buske and A. Walther, "Setup of a beam control system for high power laser system at DLR," Proc. SPIE 9989, 99890R (2016).
2.
N. R. Smith, D. C. Abeysinghe, J. W. Haus, and J. Heikenfeld, "Agile wide-angle beam steering with electrowetting microprisms," Opt. Express 14, 6557 (2006).
3.
P. H. Merritt and J. R. Albertine, "Beam control for high-energy laser devices Paul," Opt. Eng. 52, 21005 (2013).
4.
J. Cook, "High-energy laser weapons since the early 1960s," Opt. Eng. 52, 21007 (2013).5.
D. H. Kiel, "Scene surface light field representation for realistic lighting," Opt. Eng. 52, 21008 (2013).6.
TECHNICAL POINT OF CONTACT (TPOC):
None
File details come from the government source that posted it. Updated .