A18-094.pdf
PDF 47 KB Posted
- Attached to
- Compact High Efficiency High Energy Laser
- Solicitation number
- A18-094
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A18-094: Compact High Efficiency High Energy Laser
PROJECTED CMMC LEVEL REQUIREMENT:
N/A
TECHNOLOGY AREAS:
Weapons
MODERNIZATION PRIORITIES:
KEYWORDS:
High energy laser, tactical, directed energy, laser weapons, high efficiency, high power laser
ADDITIONAL INFORMATION
OBJECTIVE:
To develop a high efficiency high-energy laser (HEL) with a reduced Size Weight and Power (SWaP) footprint for integration into smaller, more tactical platforms.
DESCRIPTION:
Current high energy lasers have a large SWaP footprint due in large part to their low electrical to optical efficiency of around 40%. The low efficiency of these systems requires substantial cooling systems to remove the waste heat from the system and requires large power banks to supply the electrical power. The large size of these systems limit our ability to integrate lasers into smaller, more tactical systems.
PHASE I:
The phase I effort will result in a design concept and analysis of both the efficiency and scalability. The phase I effort shall include a final report with modeling and simulation, and/or proof of concept experimental results supporting performance claims.
PHASE II:
The phase II effort will build upon the phase I and will include lasing demonstration and scalability experiments. It is acknowledged that a full power demonstration may not be possible at this stage, but its feasibility should be well documented and validated.
PHASE III DUAL USE APPLICATIONS:
DoD laser weapons offer benefits of graduated lethality, rapid deployment to counter time-sensitive targets, and the ability to deliver significant force either at great distance or to nearby threats with high accuracy for minimal collateral damage. Future laser weapon applications will range from very high power devices used for air defense (to detect, track, and destroy incoming rockets, artillery, and mortars) to modest power devices used for counter- ISR. The phase III effort would be to design and build high efficiency HELs for integration into a variety of military platforms. The US Army Space and Missile Defense Technical Center as part of its Directed Energy research would execute military funding for this Phase III effort.
REFERENCES:
W. F. Krupke, “Diode pumped alkali lasers (DPALs) – A review,” Prog Quant Electron. 36, 4-28 (2012)1.
M. N. Zervas and C. A. Codemard, "High Power Fiber Lasers: A Review," IEEE J. Sel. Top. Quantum Electron.
20, 219–241 (2014).
2.
N. W. Carlson, Monolithic Diode-Laser Arrays (1994).3.
D. J. Richardson, J. Nilsson, and W. A. Clarkson, "High power fiber lasers: current status and future perspectives [Invited]," J. Opt. Soc. Am. B 27, B63 (2010).
4.
TECHNICAL POINT OF CONTACT (TPOC):
None
File details come from the government source that posted it. Updated .