A12-064.pdf

PDF 48 KB Posted

Attached to
Multi-Pulse Single Shot Explosive Power Supplies
Solicitation number
A12-064
Issued by

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

A12-064: Multi-Pulse Single Shot Explosive Power Supplies

PROJECTED CMMC LEVEL REQUIREMENT:

N/A

TECHNOLOGY AREAS:

Weapons

MODERNIZATION PRIORITIES:

KEYWORDS:

Magnetic flux compression, explosives, pulsed power, ferroelectric generators

ADDITIONAL INFORMATION

OBJECTIVE:

The objective of this effort is to methods for generating multiple high power electrical pulses using a single shot explosive driven power supply.

DESCRIPTION:

The development of new types of warheads and munitions requires the development of new types of power supplies due to severe volume constraints imposed by currently available platforms and due to the requirement for multiple electrical pulses in order to produce the desired effects on the target. Therefore the objective of this topic is to generate multiple electrical pulses from inherently single shot power supplies that meet the volume constraints of current munitions. The field of Explosive Pulsed Power (EPP) was established in the early 1950s to develop very compact high energy density power supplies. These power supplies either convert the chemical energy stored in explosives into electrical energy or use the shock waves generated by explosives to release the energy stored in materials such as ferroelectrics or ferromagnetic. In general, there are three overall reasons to use explosive power. These are (1) feasibility studies where only a limited number of shots are needed, (2) when large amounts of energy and/or power are needed, and (3) portability for remote testing. Since these generators use explosives, they are inherently single shot devices, which suggests that they typically generate only a single electrical pulse. However, it has recently been demonstrated that explosive driven ferroelectric and flux compression generators are capable of generating multiple electrical pulses. Of particular interest is the Flux Compression Generator (FCG), since it is capable of generating significantly more energy than the other types of EPP generators. Thus, the goal of this topic is to investigate the generation of a train of high power electrical pulses either through the use of special power conditioning circuits or through the use of multi-EPP generators.

The specific goal is to generate 8 – 10 electrical pulses with amplitudes of kiloamps and/or tens of kilovolts, while minimizing the mass and size of the overall pulsed power system.

PHASE I:

The goals of Phase I are to develop an approach for generating multiple pulses with EPPs and to build and test a brassboard to verify the validity of the proposed approach. This will necessitate the requirement that the proposing firm have access to approved explosive test facilities.

PHASE II:

The objective of Phase II is to finalize the design of the multi-pulse FCG based system and to integrate it with various types of loads and perform tests. The proposing Firm must also address any power conditioning and integration issues and assess the impact of various loads on the operation of the multi-pulse EPP system. In addition, the proposing Firm should address manufacturing issues including winding machines that provide the desired winding patterns, mandrel configurations to facilitate winding construction, and so on.

PHASE III DUAL USE APPLICATIONS:

EPPs are applicable to multiple military and commercial applications requiring pulsed power. For example, it has recently been demonstrated that Ferroelectric Generators can be used to initiate multiple blasting caps, which may be of value to the mining industry. Another applications include portable water purification units, portable nondestructive testing systems, portable lightning simulators, expendable X-ray sources, burst communications and telemetry, and oil and mineral exploration. Since several government laboratories and prime contractors are developing advanced munitions, the contractor might want to consider developing a business plan for working with these agencies and companies to facilitate transitioning their technology.

REFERENCES:

C. M. Fowler, R. S. Caird, and W. B. Garn, "An Introduction to Explosive Magnetic Flux Compression Generators", Los Alamos National Laboratory Report, LA-5890-MS (I975).

1.

G. Knoepfel, Pulsed High Magnetic Fields, North-Holland Publishing Company, New York (1970).2.

A. Neuber, Explosively Driven Pulsed Power: Helical Magnetic Flux Compression Generators, Springer (2006).

3.

L.L. Altgilbers, I. Grishnaev, M.D.J. Brown, B.M. Novac, I.R. Smith, Ya. Tkach, and Yu. Tkach, Magnetocumulative Generators, Springer (2000).

4.

TECHNICAL POINT OF CONTACT (TPOC):

None

File details come from the government source that posted it. Updated .