A11-060.pdf

PDF 46 KB Posted

Attached to
All-Digital Radar
Solicitation number
A11-060
Issued by

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

A11-060: All-Digital Radar

PROJECTED CMMC LEVEL REQUIREMENT:

N/A

TECHNOLOGY AREAS:

Electronics | Sensors

MODERNIZATION PRIORITIES:

KEYWORDS:

Digital Radar, Analog-to-Digital Converter, ADC

ADDITIONAL INFORMATION

OBJECTIVE:

Significant advances have been made in the development of digital components and digital signal processing during the last few years. Improvements in analog-to-digital converters (ADC), direct digital synthesizers (DDS), and improved signal processing algorithms for tracking and discrimination, as well as other unique methods of converting analog received radar signals to digital format have provided the means for moving the ADC function closer to the radar antenna. The ultimate goal is to place this function directly at the output of the receiver low-noise amplifier (LNA), thus resulting in essentially an all-digital radar. Significant improvements in channel balance, phase stability, and implementation of beam forming would result from minimizing the analog components in radar systems. The objective of this topic is to develop methods of implementing radar subsystems that will perform as many radar functions as possible in the digital domain.

DESCRIPTION:

Radar transmitters and receivers, which are analog components, have improved steadily over the last few years to the extent that operation of radars over bandwidths of several gigahertz (GHz) is possible. Improvements in antenna design have contributed to this wideband capability. Wide bandwidth leads to improved range resolution as well as to better radar performance in terms of imaging and signal processing, requiring precise range and Doppler information. Since virtually all radar signal processing is done in the digital domain, movement of the ADC function as close as possible to the antenna will result in better radar performance. The conventional radar receiver uses a low-noise amplifier (LNA) followed by a down-converter and intermediate frequency (IF) amplifier.

At this point, the IF output may be detected and fed into an ADC to achieve a digital output for processing. Each of these functions is done in the analog domain, and further down conversion into sub-bands of limited bandwidth may be necessary if a single ADC cannot cover the wideband output. All of these functions lead to additional noise and errors due to amplitude drift, phase variations, and digitization which result in decreased tracking and discrimination accuracy. Clearly, the weak link in this functional chain is the ADC. Placement of the ADC function closer to the antenna will minimize these errors. Such a move will require ADCs that have greatly improved sampling rates and dynamic range. The design of the ADC is based on the trade between dynamic range and sample rate. Dynamic range and bandwidth requirements are based on the radar mode (i.e., search requires high dynamic range and medium bandwidth and discrimination requires high bandwidth and medium dynamic range);

therefore a tunable ADC is desired. Current commercial designs have fixed dynamic ranges and bandwidth.

Performance at bandwidths of up to ten GHz with resolution of 8 bits is desired. This performance may be achieved by using multiple ADCs, improved ADCs, or by developing totally new approaches to implement the ADC function such as the use of electro-optical methods. One goal of the proposed effort is to improve the noise, linearity, and accuracy of the ADC function while providing increased bandwidth and resolution. Improved radar performance will benefit the warfighter by providing more accurate tracking of rockets, artillery, and mortar rounds, improved situational awareness, and better air defense. Commercial applications of this improved ADC are to weather and air traffic control radars. Although emphasis is placed on development of improved ADCs in this section, this topic is not necessarily an ADC development program. Rather, any reasonable approach to moving the digitization function closer to the antenna will be considered.

PHASE I:

Identify and assess various methods of AD conversion. At this stage, innovative approaches to the implementation of this function, with a clear roadmap to the achievement of the stated objectives, are required. Development of new methods of achieving the ADC function is desired. Construction of a working model that demonstrates the proposed approach is highly desirable. In this phase it is recommended that the recipient of this contract work closely with one of the major manufacturers of radar systems to ensure that this work is compatible with existing or envisioned radar systems.

PHASE II:

Use the approach(es) developed in Phase I to demonstrate the desired performance of 4 GHz bandwidth and 8-bit resolution by building a prototype. Characterize the performance of this prototype by measuring noise, resolution, linearity, and other errors. Show how the ADC or implemented ADC function would be used in a radar system and demonstrate the desired improved performance by experiment. Show a clear path to exploitation by interacting with radar manufacturers to ensure a commercially viable outcome.

PHASE III DUAL USE APPLICATIONS:

Continue relationships with radar manufacturers with the objective of placing the improved ADC function in major defense and commercial radars, including those used for missile defense as well as tactical radars used for detecting and tracking rockets, artillery, and mortar rounds.

REFERENCES:

Calvin Plett, Foster Dai, John Rogers, Integrated Circuit Design for High-Speed Frequency Synthesis, Artech House, Norwood, MA, 2006

1.

R. H. Walden, “Analog to Digital Converter Survey and Analysis”, IEEE Journal on Selected Areas in Communications, Vol. 17, No. 4, pp. 539 – 550, April 1999

2.

TECHNICAL POINT OF CONTACT (TPOC):

None

File details come from the government source that posted it. Updated .