A11-059.pdf
PDF 46 KB Posted
- Attached to
- Hybrid Variable Velocity Electric Gun
- Solicitation number
- A11-059
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A11-059: Hybrid Variable Velocity Electric Gun
PROJECTED CMMC LEVEL REQUIREMENT:
N/A
TECHNOLOGY AREAS:
Weapons
MODERNIZATION PRIORITIES:
KEYWORDS:
Electro-Thermal, Gun, Variable Velocity, Liquid
ADDITIONAL INFORMATION
OBJECTIVE:
The objective of this effort is to develop a hybrid electric gun that uses an environmentally friendly, non toxic liquid, in conjunction with electrical energy to propel small to medium caliber projectiles at velocities approaching 4,000 ft/sec, with variable launch velocity.
DESCRIPTION:
Present day small caliber systems utilize propellants and other consumables that create a large logistics trail that includes energetic materials. This effort would provide the basis for the development of a small weapons platform that could be used for anti-personnel and counter rocket and mortar applications. What would be developed under this effort is a brass board gun which utilizes electrical energy in conjunction with a working fluid to provide the kinetic force to drive a projectile at velocities between 3,500 and 4,000 ft/sec, with the ability to vary the launch velocity based upon the electrical energy input. The working fluids for this prototype should be environmentally friendly and be readily available in either a urban or rural setting. Particular emphasis should be given to methodologies that would produce a prototype which could utilize conductive and non-conductive (ceramic) projectiles.
PHASE I:
The initial research should focus on the breadboard design and development. The objective of this phase will be to design a prototype, and if possible demonstrate experimentally the feasibility to fire a projectile from the hybrid electric gun, at a velocity similar to that of a 22-caliber bullet.
PHASE II:
The objective of this research phase will be to build a prototype gun based upon the prototype design developed in Phase I. This breadboard prototype should experimentally demonstrate measured projectile velocities of 3,500 to 4,000 ft/sec in projectiles greater than 45-caliber using standard rifle or pistol projectiles. In addition to the high velocity aspects, the proposer should be able to demonstrate the ability to modify the velocity on demand. Use of specialized reactive bullets or other projectiles is allowed for demonstration purposes.
PHASE III DUAL USE APPLICATIONS:
A hybrid electric gun has many potential applications in the contexts of the US Army and US Navy. Included in these applications would be anti-personnel and counter rocket and mortar uses. To achieve this utility, the Phase II prototype must be extended to the level of a brass board prototype where some of the commercialization concerns for such a weapon must be addressed. The objective of this phase would be to extend the TRL level to 5, demonstration of the gun in a relevant environment against targets to be defined by the Phase III sponsor.
REFERENCES:
http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?reload=true&arnumber=5600661.
http://www.powerlabs.org/emguns.htm2.
http://en.wikipedia.org/wiki/Electrothermal-chemical_technology3.
MK 15 Phalanx Close-In Weapons System, http://www.fas.org/man/dod-101/sys/ship/weaps/mk-15.htm4.
TECHNICAL POINT OF CONTACT (TPOC):
None
File details come from the government source that posted it. Updated .