A09-121.pdf

PDF 45 KB Posted

Attached to
Rapid Identification of Ordnance and IED Materials
Solicitation number
A09-121
Issued by

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

A09-121: Rapid Identification of Ordnance and IED Materials

PROJECTED CMMC LEVEL REQUIREMENT:

N/A

TECHNOLOGY AREAS:

Electronics | Materials | Weapons

MODERNIZATION PRIORITIES:

KEYWORDS:

Improvised Explosive Device, Identification, Component, Forensic, DNA

ADDITIONAL INFORMATION

OBJECTIVE:

Design, build, and test man portable technologies that can be utilized to identify foreign ordnance and improvised explosive device components and explosives. The technologies should be user friendly and require a minimal education to utilize.

DESCRIPTION:

Recent advances in forensic analysis and computer science have shown that the identification of the origin explosive materials is possible using a variety of techniques. Radio Frequency characterization of the IED components along with analysis of the materials using stable isotope ratio, pollen analysis, plant DNA analysis, trace contaminant analysis, and other types of methods have shown that it is possible to show place of manufacture as well as point of origin of IED components.

PHASE I:

Demonstrate the basic physics of automated identification of components and develop a basic system concept and methods for the automated identification of IED components. Components to be identified should include but is not limitited to one or more of the following: 1. The manufacturer of the detonator and or fuse assembly or commonalities between them; or 2. The manufacturer of the explosive and the environments in which the explosive may have been housed or commonalities between them. Proposed concept systems that can find commonalities between IED components will also be of interest.

PHASE II:

Develop and demonstrate a brass board system for the identification of IED components and finding comonalities between the IED components. System should operate, at a minimum, in a standard laboratory enviroment.

System should, at a minimum, be able to: Identify the manufacturer of the detonator and or fuse assembly or commonalities between them. -or- Identify the manufacturer of the explosive and the environments in which the explosive may have been housed or commonalities between them.

PHASE III DUAL USE APPLICATIONS:

These systems could be used in a broad range of military and civilian security applications where the identification of bomb components are necessary for example, the rapid interdiction and neutralization of international terrorist groups or in enhancing security in industrial facilities. The end state of the systems would be an easily used man portable unit that would give field identification of point of origin of components.

REFERENCES:

Shortland, A. J. 2006. Application of Lead Isotope Analysis to a Wide Range of Late Bronze Age Egyptian Materials. Archaeometry. 48(4): 657-669.

1.

J.R. Ehleringer, J. Casale, D.A. Cooper, M.J. Lott., Sourcing Drugs With Stable Isotopes.2.

http://en.wikipedia.org/wiki/Isotope_analysis3.

Forensic applications of isotope ratio mass spectrometry : A review, Forensic science international ISSN 0379-0738, 2006, vol. 157, no1, pp. 1-22

4.

TECHNICAL POINT OF CONTACT (TPOC):

None

File details come from the government source that posted it. Updated .