A09-119.pdf

PDF 50 KB Posted

Attached to
Coherent High Power Diode Laser Array
Solicitation number
A09-119
Issued by

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

A09-119: Coherent High Power Diode Laser Array

PROJECTED CMMC LEVEL REQUIREMENT:

N/A

TECHNOLOGY AREAS:

Sensors | Weapons

MODERNIZATION PRIORITIES:

KEYWORDS:

Solid State Laser, High power laser diode array, Coherent beam combination

ADDITIONAL INFORMATION

OBJECTIVE:

The U.S. Army has a need for a coherently phased high power diode laser array that will generate upwards of 100KW of output power. Smaller scale proof-of-concept experiments for developing a coherent output beam from a laser diode array are being sought. Novel approaches for combining the output of multiple laser diodes in an array would benefit future Army directed energy weapon systems goals.

DESCRIPTION:

Laser diodes typically produce high conversion efficiencies from electrical power to photon output. This conversion efficiency has been reported as high as 73% in the literature. Most current solid state directed energy systems typically require a method for converting electricity to photons and then using those photons to pump another laser gain medium. This adds another efficiency problem to those type lasers and therefore increases the initial power requirements to generate desired laser output. It would be desirable to remove this last step in the process and use the diode laser output directly and therefore be able to implement the diode’s inherent electrical efficiency and likewise reduce the complexity of the directed energy system. The problem with using the output of the diode laser arrays for directed energy weapon applications is that the laser arrays produce multiple laser beams, each of which are highly divergent and mostly incoherent with each other. The array of beams therefore cannot be steered properly onto a target (such as an incoming artillery round) efficiently enough to kill it.

PHASE I:

Conduct research, analysis, and studies on the selected laser diode array architecture and develop measures of performance potential and document results in a final report. Provide analysis supporting the efficient coherent combination claim and prediction. The phase I effort should include modeling and simulation results supporting performance claims. The effort should also produce a preliminary concept and draft testing methodologies that can be used demonstrate the laser diode array system proposed during the phase II effort.

PHASE II:

During Phase II, a laser diode array system concept design will be completed and selected components will be developed and tested to help verify the design concept. A subscale demonstration is desired. The data, reports, and tested hardware will be delivered to the government upon the completion of the phase II effort.

PHASE III DUAL USE APPLICATIONS:

There are many potential applications for efficient high power lasers. Commercial and Military applications include laser remote sensing, laser communication, material processing, and remote target destruction. Industrial high-power applications of high-power solid-state lasers include welding, drilling, cutting, marking, and micro-processing. High energy DoD laser weapons offer benefits of graduated lethality, rapid deployment to counter time-sensitive targets, and the ability to deliver significant force either at great distance or to nearby threats with high accuracy for minimal collateral damage. Laser weapons for combat range from very high power devices for air defense to detect, track, and destroy incoming rockets, artillery, and mortars to modest power devices to reduce the usefulness of enemy electro-optic sensors. Building and testing a scalable diode array high energy laser breadboard device based on the phase II design with a near diffraction limited beam quality and high efficiency will be the goal in a phase III effort. This phase III breadboard would demonstrate the ability to be scaled to weapons class power. Military funding for this phase III effort would be executed by the US Army Space and Missile Defense Technical Center as part of its Directed Energy research.

REFERENCES:

J. S. Sanghera, V. Q. Nguyen, P. C. Puresa, R. E. Miklos, F. H. Kung, and I. D. Aggarwal, “Fabrication of Long Lengths of Low-Loss IR Transmitting As40S(60-X)SeX Glass Fibers,” Journal of Lightwave Technology, Vol 14, No. 5, May 1996.

1.

Y. Raichlin, E. Shulzinger, A. Millo and A. Katzir, "Fiberoptic Evanescent Wave Spectroscopy (FEWS) System and Its Application in Science, Industry, Medicine and Environmental Protection," 5th International Conference on Mid-Infrared Optoelectronic Materials and Devices, September 8-11, 2002.

2.

D. Garbuzov and M. Dubinskii, “110 W Pulsed Power From Resonantly Diode-Pumped 1.6um Er:YAG Laser”, Applied Phycs Letters, 19 September 2005.

3.

Annual Directed Energy Symposium Proceedings available at:

http://www.deps.org/DEPSpages/forms/merchandise.html

4.

Electro-Optics Handbook, RCA Solid State Division, Lancaster PA, 19745.

W. Koechner, "Solid-State Laser Engineering," Springer-Verlag, 20066.

TECHNICAL POINT OF CONTACT (TPOC):

None

File details come from the government source that posted it. Updated .