A09-118.pdf
PDF 47 KB Posted
- Attached to
- Ultra Compact Energy Efficient High Voltage Switches for Switching Very Small Energy Stores
- Solicitation number
- A09-118
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A09-118: Ultra Compact Energy Efficient High Voltage Switches for Switching Very Small Energy Stores
PROJECTED CMMC LEVEL REQUIREMENT:
N/A
TECHNOLOGY AREAS:
Ground Sea | Weapons
MODERNIZATION PRIORITIES:
KEYWORDS:
Pulsed power, Switch, High Voltage, Electrical Breakdown
ADDITIONAL INFORMATION
OBJECTIVE:
The objective of this effort is to develop compac,t energy efficient, high voltage switches. These switches will be used to deliver the energy from power supplies, such as ferroelectric generators, that store very small amounts of prime energy to various loads.
DESCRIPTION:
The US Army has programs that require the switching of very small energies in very compact geometries. In general, simple over voltage switches will consume 1/8 to 1/2 of a joule of energy in the process of igniting the breakdown by the breaking of dielectric bonds and heating materials in a small channel. In some instances, this amounts to the total energy budget available from the power supply. Therefore, the Army is seeking innovative approaches to switching small energy stores with significantly lower losses than observed in simple voltage breakdown switches that meet form factors of interest and that can withstand high g-forces. In addition, the candidate switches must fit into small geometrical spaces; i.e., less than 40 mm diameter by 25 mm long. While multi-shot switches are desirable, single shot systems will satisfy minimal requirements.
PHASE I:
Design and develop new compact efficient high voltage switches and conduct proof-of-principle demonstrations
1) to verify that these new switches transfer energy with minimal losses and 2) to assess their ability to function properly with explosive and/or non-explosive driven low energy power supplies.
PHASE II:
Since different low energy power supplies may require different switching characteristics, several different switches will need to be designed and their range of operating characteristics determined. In order to verify switch performance, each switch must be integrated with its intended power supply and undergo testing. Other issues that need to be addressed are high g-force survivability, manufacturability, environmental effects, and platform integration.
PHASE III DUAL USE APPLICATIONS:
These switches would be used in pulsed power technologies that are applicable to multiple military and commercial applications. These include water purification units, nondestructive testing systems, portable lightning simulators, expendable X-ray sources, medical instrumentation, manufacturing, and oil and mineral exploration. Since several government labs and prime contractors are developing advanced munitions, the contractor will need to have developed a business plan for working with these agencies and/or companies. This technology could find use in the following Army Technology Objectives: Standoff IED detection and defeat, fuze and power for advanced munitions, advanced lasers, multi-mode high power microwave (HPM), power for the dismounted soldier, solid state laser, compact radar technology, smaller, lighter, and cheaper munitions, pulsed power and directed energy weapons, and sensor, warhead, and fuze technology.
REFERENCES:
A.H. Guenther, Gas Discharge Closing Switches (Advances in Pulsed Power Technology), Springer, ISBN-10:
0306436191 (1991).
1.
A.H. Guenther, T. Martin, and M. Kristiansen, Opening Switches (Advances in Pulsed Power Technology), Springer, ISBN-10: 030646643 (1987).
2.
J.R. Mason, Switch Engineering Handbook, McGraw-Hill Professional Publishing, ISBN:-10: 007040769X (1992)
3.
TECHNICAL POINT OF CONTACT (TPOC):
None
File details come from the government source that posted it. Updated .