A06_Specs.pdf
PDF 46 KB Posted
- Attached to
- NM FISH AND WLDLFE CONSERVE OFC POLARIS
- Solicitation number
- 140F1G26Q0064
About this file
Justification and Minimum Requirements for Purchasing UTV
This document is a justification and specifications document for the procurement of one Polaris Ranger SP 570 utility terrain vehicle (UTV) with specified custom add-ons and minimum requirements.
The procurement specifies a Polaris Ranger SP 570 base model in Sage Green with the following custom add-ons: Poly 2-seat Sport Roof, Polaris Pro HD 4,500 lb. Winch, Standard Rear Brushguard, Front and Rear A-Arm Guards, Front Pulse Bar and Harness, Upper Front Bumper, Rear Bumper, and sun visors. The UTV must meet specific operational requirements driven by its intended use in muddy environments for transporting fiberglass transport tanks and equipment. Critical requirements include: 2-person side-by-side capacity with overall length under 112 inches; no windshield, rear window panel, or fully enclosed doors to prevent mud obstruction; 4,500 lb. winch for extraction from difficult terrain; front and rear bumper/brushguards for dense brush navigation; gas-powered engine with minimum 500 cc/44 HP displacement; bed dimensions of at least 32 inches deep by 42 inches wide with minimum 500 lbs. weight capacity to support a 52-gallon transport tank and associated equipment; solid roof; front and rear A-Arm Guards; 4-wheel drive with minimum 11 inches of ground clearance and 25-inch tires. The vendor must have the capability to deliver the UTV at ground level, as the receiving station has no loading dock.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140F1G26Q0064.pdf | ||
| Solicitation_CLAUSES_OM_GS.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Justification and Minimum Requirements for Purchasing UTV QTY: One (1) Make: Polaris Model: Ranger SP 570 Description: Base Model in Sage Green
Custom Add-ons:
Poly 2-seat Sport Roof Polaris Pro HD 4,500 lb. Winch Standard Rear Brushguard Front and Rear A-Arm Guards Front Pulse Bar and Harness Upper Front Bumper Rear Bumper Sun visors
UTV Requirements:
• Must have 2-person side-by-side capacity and an overall length of less than 112 inches.
• Must not have a windshield, rear window panel, or fully enclosed doors – UTV will be used in a very muddy environment and any solid panels could get obstructed by mud and obscure vision.
• Must have a 4,500 lb winch - UTV will be used in wet and muddy environments and a powerful winch is needed to extract it from quicksand or clay.
• Must have front and rear bumper/brushguards - The UTV will need to be driven through dense brush to access work sites.
• Must be gas-powered and have an engine displacement of at least 500 cc/44 HP to haul the transport tank and drive in the poor conditions we experience.
• Bed must be at least 32" deep by 42" wide – UTV bed will hold fiberglass transport tanks which are only slightly smaller than these measurements.
• Weight capacity of bed must be at least 500 lbs to support the weight of the 52-gallon transport tank (433 lbs.), the weight of the tank itself, and oxygen bottle(s).
• Must have a solid roof
• Must have front and rear A-Arm Guards
• Must have 4 wheel drive with minimum 11” of ground clearance and 25” tires
• VENDOR MUST HAVE ABILITY TO DELIVER UTV AT GROUND
LEVEL. RECEIVING STATION HAS NO LOADING DOCK.
File details come from the government source that posted it. Updated .