A06_-_Specifications_-_Marshmaster.pdf

Specifications Bill Williams River National Wildlife Refuge

Purchase of a Amphibious Track Vehicle with Attachments and Trailer with 1 Trade-In

Lake Havasu National Wildlife Refuge Complex, AZ July 2025

Name of Item: Amphibious Track Vehicle Manufacturer: Marshmaster Model Number: MM-2MX-KC-FH

Additional Information: A used or new machine with 700 hours or less operating time is acceptable.

This is a brand name request for a Marshmaster Amphibious Track Vehicle, Marshmaster attachments, and a Marshmaster trailer. There is one trade-in involved in this purchase request (see attached brand name justification, trade in form, and below specifications).

BODY:

• 15' 10" Long (minimum) x 8’-0” Wide (maximum) x

7’10” High (maximum)

• All Welded 1/8” Aluminum Body with 3/16” High

Strength Pontoon Bottoms

• 7000 LB (maximum machine weight)

• 1300 lb. Floating Load Capacity

• Overhead Rack/Brush guard, and Windshield

• Walking deck full width of the tracks with slip resistant coating on decks

• 32” Ground Clearance (minimum)

• All Stainless-Steel Fasteners throughout machine

• Minimum 25 Gallon secured aluminum fuel tank mounted in rear bed area easily accessible and serviceable

• Rear mounted hydraulic three-point hitch with quick tach system

• Overhead cargo rack (capable of supporting minimum of

100 lb. of gear)

• Catwalk over winch

• (2) plugs installed in the floorboard of the driver and passenger floorboard for drain purpose

DRIVE SYSTEM:

• Kohler 2504 TCR 74 HP 4-cylinder water Cooled Turbo diesel.

• TIER 4 FINAL CERTIFIED MEETING ALL

REQUIREMENTS SET FORTH BY THE EPA FOR

2019 OFF ROAD DIESEL ENGINES

• Twin Hydrostatic Transmission

• Oil bath lubricated low speed/high torque final drives that requires NO external greasing of bearings

• Thermostatic controlled hydraulic driven cooling fan with reversing feature for radiator/oil cooler cleanout

• Side by side radiator/hydraulic oil cooler

SPEED:

• 8 mph minimum on land, 1 mph minimum in water

TRACK SYSTEM:

• Maximum 28” Wide Aluminum Cleats on 4" centers

• Two Wide Low Stretch Rubber Belts per Track

• Four Rows of Urethane Drive Lugs/Track Guides per

Track

• Four UHMW Drive Sprockets per Track

• Eighteen urethane Bogie Wheels per Track

• Nine oil bath lubricated bogey axle assemblies per pontoon. Must be internally oil bath lubricated and sealed requiring no external greasing.

• All corrosion-proof stainless-steel track bolts and hardware for saltwater usage

• No external grease points anywhere on rear drive or bogey system

• Front idler shafts and rear drive shafts to be stainless steel.

ELECTRICAL SYSTEM:

• Minimum 12 Volt Battery Secured in Enclosed

Compartment

• Multifunction engine display

• Minimum (2) LED Front Lights and (2) LED Rear Lights

• Battery cut-off switch

WINCH-JACK:

• Front Mounted 10,000lb Hydraulic Winch with 75’ of

7/16" cable (minimum)

• Weight rated jack to lift the machine

FIRE SUPPRESSION SYSTEM

• Minimum (2) – 55-gallon Aluminum Water Tank built into each pontoon

• Water Level Gauge for Tanks (Mounted in cab)

• Hydraulic Motor Driven, Self-priming Centrifugal High-

Volume Water Pump

• Minimum 15’ 1 1/2 Suction Hose for quick fill

• Minimum 25’ 1 1/2” Discharge Hose

• Fog & Stream Spray Nozzle

• Camlock Hose Connections for Pump

LOW FLOW AND HIGH FLOW

AUXILIARY HYDRAULIC CIRCUITS:

• Low flow auxiliary hydraulic circuit 3-8gpm@3000psi and 2000 rpm (for spraying water)

• High flow auxiliary hydraulic circuit 30 GPM max @

3500 psi/2600 rpm (for cutter attachment)

MACHINE/ENGINE WARRANTY:

• Factory Direct

• 1 Year or 1000 hr. warranty

• Engine warranty 3yr or 2000 hr. 100% parts and labor

CUTTER ATTACHMENT:

• Hydraulic driven rotary cutter attachment

MARSHMASTER MACHINE

SPECIFICATIONS

Additional Information: A used or new machine with 700 hours or less operating time is acceptable.

TRAILER SPECIFICATIONS:

• Maximum 8’ wide x 18’ long tilt deck (max deck height 38”, maximum overall length 27’)

• 2” x 10” #1 treated deck

• (2) 7000 lb top mount, high profile torsion bars

• Machine access ladder

• Load range E 235/75R16 commercial tires, with galvanized rims

• Matching spare tire and rim, mounted on trailer

• 12” - 8 on 6.5 - electric brakes

• Electric brake actuator with breakaway

• 2 5/16” forged adjustable coupler

• Minimum GVWR of 13,000 lbs.

• Minimum 5000# tongue jack

• Manual tilt 3” hydraulic cylinder with dampener

• Galvanized steel frame with 6” channel

• Four (4) D-ring tie downs

• 2 galvanized safety chains per DOT specs

• Light package with (4) LED stop/tail, (4) 2” amber clearance lights and (7) red clearance lights

• Reflector package with (4) 2” red and (2) 2” amber and reflective tape side and rear per DOT standards

• 7 pin round lug light connector

• 4 tie down straps weight rated for the machine to secure machine to the trailer

• Shall have a fixed front section

The following attachments shall be installed for pickup or drop shipped to Parker, Arizona:

1) MM-2 Vegetation Blade (installed on front hitch).

2) MM-2 Rotary Cutter (installed on rear 3 Point hitch).

3) External Fire Suppression Unit- 110 gallon (installed).

4) MM-2LX Roller Chopper 16” drum (freight ready).

5) MM-2 Backhoe with thumb (freight ready).

6) MM-2LX Prop Drive-10HP (installed)

7) MM-2 XLP-L Extra Long Painted Tilt Deck Trailer with Blade Rest

PROJECT CONTACT:

Richard Meyers, Refuge

Manager Lake Havasu NWR

Complex 60911 Highway 95

Parker, AZ 85344

Mobile: 928-290-9063

Email:Richard_Meyers@fws.gov

ATTACHMENTS, DELIVERY, AND POINTS OF CONTACT

TRADE IN: Acceptance of one (1) trade-in is a condition of award.

The cost to transport the trade-in unit to a facility more than 1,630 miles will be at the cost of and arranged by the awardee. The cost to transport the trade-in unit to a facility less than 1,630 miles will be at the cost of and arranged by the Government.

DELIVERY/INSTALLATION:

The cost to deliver the Marsh Master machine, trailer, and attachments from a facility more than 1,630 miles from the Lake Havasu NWR Complex will be at the cost of and arranged by the awardee. The cost to deliver the Marsh Master machine, trailer, and (safely transportable**) attachments from a facility less than 1,630 miles from the Lake Havasu NWR Complex will be at the cost of and arranged by the Government.

** As referenced above any attachment that cannot be safely transported by a Government-owned heavy-duty Dodge Ram 3500 shall be shipped/delivered by the awardee.

** Safely transportable attachments (as referenced above) shall be installed by the awardee prior to acceptance.

The Marsh Master machine, trailer, and attachments (safely transportable**) shall be available for pickup less than 1,630 miles from Lake Havasu NWR Complex or delivered to Lake Havasu NWR Complex before November 1, 2025.

DELIVERY ADDRESS: Lake Havasu NWR Complex, 60911 Highway 95, Parker, AZ 85344 mailto:Richard_Meyers@fws.gov

2024 Year, MM-2MX-KC-FH machine (Serial # 333745) with Attachments and Trailer