A06_-_Specifications_-_Fat_Truck_with_Trailer.pdf

Specifications Texas Chenier Plain Fire Zone

Purchase of an Amphibious Wheeled Vehicle with Attached Amphibious Trailer

Texas Chenier Plain National Wildlife Refuge Complex, TX August 2025

Name of Item: Amphibious Wheeled Vehicle

Manufacturer: Fat Truck

Model Number: Fat Truck 2.8 pickup w/ attached amphibious trailer

This is a brand name request for a Fat Truck amphibious track vehicle and an amphibious trailer (see attached brand name justification and below specifications).

FAT TRUCK AMPHIBIOUS

WHEELED VEHICLE

SPECIFICATIONS

DIMENSIONS

• Height 103 in (2620 mm)

• Length 146.5 in (3720 mm)

• Width 100 in (2540 mm)

• Ground clearance 20.7 in (526 mm)

PERFORMANCE:

• Payload 2200 lb (1000 kg)

• Passengers capacity 2 + 6 optional

• Maximum speed on land 25 mph (40 km/h)

• Maximum speed on water 3.1 mph (5 km/h)

• Maximum uphill & downhill 35°/ 70%

• Maximum sidehill 22°/ 40%

• Turning radius 0°

• Shipping weight 4960 lb (2250 kg)

• Ground pressure fully loaded 1.6 lb/po² (0.11 kg/cm²)

ENGINE

• Make Caterpillar

• Model C2.2 Turbo diesel

• Emission standards EPA Tier 4 Final EU Stage V

• Number of cylinders 4 cylinders

• Displacement 135 po³ (2.22 L)

• Horsepower @ 2800 RPM 74 hp (55 kW)

• Torque @ 1400 RPM 199 lb-ft (270 N-m)

• Cooling System Liquid cooled

TRANSMISSION

• Type ` Hydrostatic

• Final drive Carbon fiber synchronous belts

FUEL SYSTEM

• Capacity 21 US Gal (80 L)

• Average fuel autonomy 12 hours

ELECTRICAL

• Voltage 12V

• Alternator capacity 275 A

• Battery capacity 960 CCA

• Battery type AGM

CONTROLS

• Controller Microprocessor

• Steering Joystick

• Display Color display

TIRES

• Front & Rear FAT TRUCK® LGP 1640 x 640 x 610

• Pressure 0.5 to 4.5 PSI (0.07 to 0.31 BAR)

• Pressure control Automatic pressure control

BRAKES

• Brakes Positive deceleration through hydrostatic transmission

• Parking brakes Brake disc applied pressure released

SAFETY FEATURES

• ROPS ISO 3471

• EPA Stage V

• Brakes Automatic safety brake

STANDARD EQUIPMENT

• Doors Lockable

• Operator seats 2 front seats with 3-points seat belts

• Lights Front, brakes, position, flashers, dome

• Horn Electric

• Ingress Front ladder with grab handles

• Standard color White

• Fire extinguisher 2.5 lb ABC

WARRANTY

• Limited 1 year / 1000 hours

OPTIONS

• Air conditioning

• Front winch

• Additional battery

• Rear Hitch

• Front and rear shackles

• Engine & hydraulic heater 110 V

• Canopy, 2-person cab

• Heater / defroster

• Front windshield with wiper

• White Custom color

• Roof rack

• Exterior mirrors

• Back-up camera

• Back-up alarm

• 4-way camera system

• Rear ROPS

• Rear seats with safety belts

• Search light with remote control

• Front, side and rear light LED bar

• Extra heater

• 4 corner LED beacon lights

• Electronic inclinometer

• Hydraulic capstan and accessories

• Hot sticks storage tubes

• Ventilation fan

• Storage box

• Rear ladder

• Tow package

• Wheel Pods™

AMBHIBIOUS TRAILER

• Interior width 45 in (1138 mm)

• Total width 100 in (2540 mm)

• Interior lenght 99 in (2516 mm)

• Total lenght 137 in (3470 mm)

• Height 66 in (1676 mm)

• Shipping weight 1465 lb (665 kg)

• Axles 1

• GVWR 3665 lb (1665 kg)

• Payload 2200 lb (1000 kg)

• Ball type Pintle eye

• Connector 4 pins

• Tire type FAT TRUCK LGP 1640 X 640 X 610

• Tire inflation cold 4.5 PSI (31 kPa)

• Rim 24’’

• Steel type Steel & Aluminum

ATTACHMENTS, DELIVERY, AND POINTS OF CONTACT

The following attachments shall be delivered to Winnie, Texas:

1) Amphibious Trailer

PROJECT CONTACT:

Stephen LeJeune III

Assistant Fire Management Officer

Texas Chenier Plain Fire Zone

1035 W. Buccaneer Dr.

Winnie, TX 77665

Mobile: 409-284-1772

Email:Stephen_LeJeune@fws.gov

Delivery Location:

Winnie Depot

1035 W. Buccaneer Dr

Winnie, TX 77665

DELIVERY/INSTALLATION:

Prices quoted must include installation. All labor and parts associated with and required for installation are the sole responsibility of the contractor. No assistance or equipment will be provided by the government.

Installation shall be completed according to industry standards.

Prices quoted shall be FOB Destination

“F.o.b. destination” means --Free of expense to the Government delivered, on board the carrier’s conveyance, at a specified delivery point where the consignee’s facility (plant, warehouse, store, lot, or other location to which shipment can be made) is located; and

Supplies shall be delivered to the destination consignee’s wharf (if destination is a port city and supplies are for export), warehouse unloading platform, or receiving dock, at the expense of the contractor. The Government shall not be liable for any delivery, storage, demurrage, accessorial, or other charges involved before the actual delivery (or “constructive placement” as defined in carrier tariffs) of the supplies to the destination, unless such charges are caused by an act or order of the Government acting in its contractual capacity. If rail carrier is used, supplies shall be delivered to the specified unloading platform of the consignee. If motor carrier (including

“piggyback”) is used, supplies shall be delivered to truck tailgate at the unloading platform of the consignee, except when the supplies delivered meet the requirements of Item 568 of the National Motor Freight

Classification for “heavy or bulky freight.” When supplies meeting the requirements of the referenced Item 568 are delivered, unloading (including movement to the tailgate) shall be performed by the consignee, with assistance from the truck driver, if requested. If the contractor uses rail carrier or freight forwarder for less than carload shipments, the contractor shall ensure that the carrier will furnish tailgate delivery when required, if transfer to truck is required to complete delivery to consignee.

mailto:Richard_Meyers@fws.gov

Contractor responsibilities. The contractor shall --

(1)(i) Pack and mark the shipment to comply with contract specifications; or

(ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements;

(2) Prepare and distribute commercial bills of lading;

(3) Deliver the shipment in good order and condition to the point of delivery specified in the contract;

(4) Be responsible for any loss of and/or damage to the goods occurring before receipt of the shipment by the consignee at the delivery point specified in the contract;

(5) Furnish a delivery schedule and designate the mode of delivering carrier; and

(6) Pay and bear all charges to the specified point of delivery.