A06_Specifications.pdf
PDF 67 KB Posted
- Attached to
- HAVRE FENCE MATERIALS
- Solicitation number
- 140L3625Q0086
About this file
This document is a technical specification section for wire fences and gates (Division 2, Section MT02834, Revision 03-90) that details precise material requirements for fence construction. The specification covers three primary components: wire, steel fence posts, and fasteners. The barbed wire must be a two-ply 12-1/2-gauge galvanized strand with 2-point, 14-gauge barbs spaced 4 inches apart, zinc-coated with a minimum breaking strength of 950 lb-force. Steel fence posts are strictly specified as all (solid) green, with specific requirements including a minimum weight of 1.33 lb/linear foot, a welded or riveted anchor plate, and clip-type wire fasteners, with punched tabs explicitly not acceptable. Fastener clips must be 11-gauge galvanized wire, and all materials must conform to specific ASTM standards (A 121 and A 702).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140L3625Q0086.pdf | ||
| Schedule_of_Items.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DIVISION 2 SECTION
MT02834
SITEWORK WIRE FENCES AND
GATES
Rev. 03-90
American Society for Testing and Materials:
ASTM A 121-Rev-A-92 Zinc-Coated (Galvanized) Steel Barbed Wire ASTM A 702-89 Steel Fence Posts and Assemblies, Hot-Wrought
A. Wire:
1. Barbed Wire: A strand of two plies of 12-1/2-ga galvanized wires twisted together with 2-point barbs of 14-ga wire spaced 4 inches apart.
Wire and barbs shall be zinc-coated steel, with a zinc coating of at least
0.3 oz/ft2 of coated surface area. The minimum breaking strength of each wire shall be 950 lb-force. Wire shall conform to ASTM A 121.
B. Steel
2. Steel Fence Posts: All (Solid) Green. White or silver or lime green topped posts are not acceptable, "T" or "U" (channel) bar type, with a welded or riveted anchor plate, and shall be furnished with clip-type wire fasteners (punched tabs for fastening wires are not acceptable). Steel posts shall be manufactured from wrought, rail, or new billet steel, and shall have a minimum weight of 1.33 lb/lin ft exclusive of the anchor plate, which shall weigh a minimum of 0.67 lb +5%, and shall be a minimum of 18 square inches in area. Steel fence posts and fasteners shall be in accordance with ASTM A 702.
C. Fasteners:
3. Clips: Shall be 11-gauge galvanized wire.
File details come from the government source that posted it. Updated .