A06_Specifications.pdf

TECHNICAL

SPECIFICATIONS

M1 Series Furnaces M1G* Standing Pilot M1M* Hot Surface Ignition M1S* Oil Gun M1B* Gas Gun The M1 Series furnace is designed for all sizes of manu-factured and modular homes. These units incorporate high efficiency, reliability, and low maintenance. Units may be installed free standing in a utility room or en-closed in an alcove or closet. M1 Series furnaces are available in A/C adaptable or A/C ready, with or without coil cavity box, multiple blower combinations for cooling re-quirements, and many burner options.

Features and Benefits

• Sealed Combustion System

Vents exhaust gas directly outdoors and draws in 100% outside air for the burner.

• Easy Open Pawl Latch Secures the door firmly for transit, yet allows easy removal for access.

• Choice of Air Conditioning Options From 2 to 5 tons A/C ready.

• Large, Effective Air Filter Room air is cleaner with this permanent washable filter.

• High Efficiency Drum Heat Exchanger Delivers optimum heat transfer with low air resistance.

• Appliance Quality Door Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.

• Fully Insulated Cabinet Insures minimized heat loss and quiet operation.

• Reliable Burner With uniform flame pattern extends life of heat ex-changer.

• Ventilation Switch Conveniently located in the door (heat only models).

MODEL IDENTIFICATION

SPECIFICATIONS

Door Color W - White

Cabinet Dimensions A - 56" x 19-3/4" x 23-3/4” B - w/Coil Cavity, 76" x 19-3/4" x 23-3/4"

Electrical Code A - 1PH, 60 Hz, 120 VAC

Heating Capacity Input, BTUH (000’)

Application M-Manufactured Home

Furnace Series

Fuel, Type of Combustion G-Gas, Direct Vent, Pilot Burner Natural or Forced Draft M-Gas, Direct Vent, HSI, Forced Draft B-Gas, Direct Vent, Gun Burner S-Oil, Direct Vent, Gun Burner

Comfort Model H - Heating A - Heating, A/C Ready B - A/C Ready, 3 Ton C - A/C Ready, 4 Ton D - A/C Ready, 5 Ton

M 1 M B - 056 A - B W

Electrical Supply - 120 volts, 60HZ, 1 Ph. Thermostat Circuit - 24 volts, 60HZ, 30 vac Fuse or Breaker - 15 amps Normal Anticipator Setting - 0.4 Temperature Rise - 45° to 75°F Manifold Pressure - Natural Gas: 3.5” w.c. LP Gas: 10” w.c.

Gas Connection - 1/2" NFPT *Blower Capacity, relay box must be added for A/C High Altitude - See Table 11 in the Installation Instructions for elevations above 2,000 feet.

Furnace Input Output Orifice No E.S.P. Pilot Ignitor Model No MBtu/h MBtu/h Nat. LP In WC Burner Direct M1GH 056 56 45 29 45 0.2 x M1GB 056 56 45 29 45 0.3 x M1GC 056 56 45 29 45 0.3 x M1GD 056 56 45 29 45 0.3 x M1GH 070 70 57 24 42 0.3 x M1GB 070 70 57 24 42 0.3 x M1GC 070 70 57 24 42 0.3 x M1GD 070 70 57 24 42 0.3 x M1GH 077 77 60 21 40 0.3 x M1GB 077 77 60 21 40 0.3 x M1GC 077 77 60 21 40 0.3 x M1GD 077 77 60 21 40 0.3 x M1GH 090 90 70 17 36 0.3 x M1GB 090 90 70 17 36 0.3 x M1GC 090 90 70 17 36 0.3 x M1GD 090 90 70 17 36 0.3 x M1MA 056 56 46 29 45 0.2 x M1MB 056 56 46 29 45 0.3 x M1MC 056 56 46 29 45 0.3 x M1MD 056 56 46 29 45 0.3 x M1MA 070 70 57 24 42 0.3 x M1MB 070 70 57 24 42 0.3 x M1MC 070 70 57 24 42 0.3 x M1MD 070 70 57 24 42 0.3 x M1MB 077 77 62 21 40 0.3 x M1MC 077 77 62 21 40 0.3 x M1MD 077 77 62 21 40 0.3 x M1MB 090 90 72 17 36 0.3 x M1MC 090 90 72 17 36 0.3 x M1MD 090 90 72 17 36 0.3 x M1BA 066 66 53 26 43 0.24 x M1BC 066 66 53 26 43 0.3 x M1BB 086 86 68 18 37 0.3 x M1BC 086 86 68 18 37 0.3 x M1SA 066 66 54 .50 Gph 0.24 M1SC 066 66 54 .50 Gph 0.3 M1SB 086 86 71 .65 Gph 0.3 M1SC 086 86 71 .65 Gph 0.3

Burner Model

AF-10 Nozzle

Spray Angle 80° A

Comb. Motor A/C Ready AFUE % Shipping Weight

Blower Hp Tons Nat / LP A Cabinet B Cabinet 1/8 2* 146 161 1/4 3 151 166 1/2 4 155 170 3/4 5 157 172 1/5 2½* 148 163 1/4 3 152 167 1/2 4 156 171 3/4 5 158 173 x 1/4 3* 147 162 x 1/4 3 148 163 x 1/2 4 155 170 x 3/4 5 157 172 x 1/4 3* 149 164 x 1/4 3 150 165 x 1/2 4 155 170 x 3/4 5 157 172 x 1/8 2 147 162 x 1/4 3 152 167 x 1/2 4 156 171 x 3/4 5 158 173 x 1/5 2½ 149 164 x 1/4 3 153 168 x 1/2 4 157 172 x 3/4 5 158 173 x 1/4 3 149 164 x 1/2 4 156 171 x 3/4 5 158 173 x 1/4 3 151 166 x 1/2 4 156 171 x 3/4 5 158 173 x 1/5 2½ 170 185 x 1/2 4 172 187 x 1/4 3 178 193 x 1/2 4 179 194 x 1/5 2½ 150 165 x 1/2 4 152 167 x 1/4 3 158 173 x 1/2 4 159 174

DIMENSIONS

BLOWER PERFORMANCE

CLEARANCES

“A”- 56"

23 3/4"

“B”- 76"

19 3/4"

“A” Model-w/o Coil Cabinet

“B” Model-w/Coil Cabinet

ALL MODELS CLOSET ALCOVE

Front 6" 18" Back 0" 0" Sides 0" 0" Roof Jack 0" 0" Top 6" 6" Top and Sides of Duct 0" 0" Bottom of Duct

B Cabinet 0" 0" A Cabinet (w/ coil box) 0" 0" A Cabinet (w/o coil box) 1/4" 1/4"

ESP CFM WITHOUT COIL CFM WITH COIL

Model No. HP/wheel Speed (" WC) Low Med-Lo Med-Hi High Low Med-Lo Med-Hi High

M1GH 056 1/8 HP 1 0.1 820 730

M1MA 056 9 X 7.5 0.2 790 680

0.3 720 610

0.4 650 550

0.5 560 450

0.6 430 330

M1GH 070 1/5 HP 1 0.1 950 850

M1MA 070 9 X 7.5 0.2 910 810

M1BA 066 0.3 850 730

M1SA 066 0.4 780 670

0.5 680 580

0.6 570 480

M1GH 077 1/4 HP 1 0.1 1210 1140

M1MA 077 10 x 8 0.2 1190 1110

M1GH 090 0.3 1140 1050

M1MA 090 0.4 1090 990

0.5 1030 930

0.6 970 870

M1GB 056 1/4 HP 3 0.1 740 950 1210 730 930 1140

M1MB 056 10 x 8 0.2 730 940 1190 720 920 1110

M1GB 070 0.3 700 920 1140 690 880 1050

M1MB 070 0.4 670 880 1090 660 840 990

M1GB 077 0.5 640 840 1030 620 790 930

M1MB 077 0.6 610 780 970 580 740 870

M1GB 090

M1MB 090

M1BB 066

M1SB 066

M1BB 086

M1SB 086

M1GC 056 1/2 HP 4 0.1 890 1070 1270 1480 880 1050 1220 1340

M1GC 070 11 X 8 0.2 880 1060 1260 1460 870 1040 1210 1330

M1GC 077 0.3 860 1020 1220 1400 850 1000 1160 1270

M1GC 090 0.4 840 1000 1180 1350 820 980 1110 1210

M1MC 056 0.5 810 960 1120 1280 800 940 1070 1160

M1MC 070 0.6 760 920 1080 1220 750 890 1010 1090

M1MC 077

M1MC 090

M1BC 066

M1BC 086

M1SC 066

M1SC 086

M1GD 056 3/4 HP 4 0.2 900 1110 1450 1850 870 1070 1420 1700

M1GD 070 10 x 8 0.3 860 1080 1410 1810 840 1050 1380 1650

M1GD 077 0.4 830 1040 1370 1760 820 1030 1350 1630

M1GD 090 0.5 790 1020 1340 1730 780 1000 1320 1590

M1MD 056 0.6 770 990 1320 1700 760 980 1290 1550

M1MD 070

M1MD 077

M1MD 090

St. Louis, MO

713A-0800 (Replaces 713A-0800) Before purchasing this appliance, read important energy cost and efficiency information available from your retailer. Specifications and illustrations subject to change without notice and without incurring obligations. Printed in U.S.A. (9/00)

R R

ACCESSORIES

EFFICIENCY

RATING

CERTIFIED

ama

Description Part Number Blower, 2-3 ton 903773 Blower, 2-4 Ton 903413 Blower, 2-5 Ton 903414 Relay Kit, 2 wire 903092A Relay Kit, 4-7 wire 903098A Heating Thermostat (I) 903182 / 903188 Heating Thermostat (M) 903183 / 903189 Heating/Cooling Thermostat CM65 (I) 903184 / 903190 Heating/Cooling Thermostat CM65 (M) 903185 / 903191 Heating/Cooling Thermostat G.E. (I) 903186 / 903192 Heating/Cooling Thermostat G.E. (M) 903187 / 903193 Thermostat Sub-Base 914146 Automatic Cavity Damper 901083 New England Safety Kit 901855 Ceiling Rings (1 piece for flat ceilings) 901943 Ceiling Rings (2 piece adjustable) 902521 "VEE" Box Adapters (10") - 5 / carton 901985 Duct Connector 10" x 6" - 6 / carton 902926 "VEE" Box Adapters (12") - 5 / carton 902149 Single Wide Fitting Kit (12") 911468A Double Wide Fitting Kit (12") 911469A Single Wide Fitting Kit (14") 914957 Double Wide Fitting Kit (14") 914956 Y-Fitting (12") 911470 Y-Fitting (14") 917195

Vent Kits Part Number Soffit Air Inlet (for VentilAire III only) 917201 Wall Vent Kit (side wall depressurization) 914115 Soffit Vent Kit (soffit depressurization) 914116 Roof Vent Kit (roof depressurization) 914117 Air Tube Kit M (high capacity M Series gas/oil furnaces) 914118 VentilAire III - Sloped 3/12 914098 VentilAire IV - Sloped 3/12 914229 VentilAire IV-A - Sloped 3/12 (w/alarm) 914750

Plenum Connectors Part Number

11.25 x 13.50 x 0.88 12 / carton 901987A

11.25 x 13.50 x 2.00 12 / carton 901988A

11.25 x 13.50 x 4.25 6 / carton 901989A

11.25 x 13.50 x 6.25 6 / carton 901990A

11.25 x 13.50 x 8.25 4 / carton 901991A

11.25 x 13.50 x 10.25 3 / carton 901992A

11.25 x 13.50 x 12.25 3 / carton 901993A

11.25 x 13.50 x 6.25 24 / carton 902681A

Flue Extensions

Part Number

EI10A-5 901935

EI18A-5 903107

EE16A-5 901937

Sloped Roof Flashings

Part Number

2" in 12" - 5 / carton 901942 2.5" in 12" - 5 / carton 901941 3" in 12" - 5 / carton 901940

3.5" in 12" - 5 / carton 901939 4" in 12" - 5 / carton 901938

Roof Jack Part Number

FAW1523-0A 903658

FAW2135-0A 903659

FAW2747-0A 903660

FAWT2747-0A 903661

SAW2135-2A 903662

SAW2747-2A 903663

SAW3563-2A 903664

SAWT2135-2A 903680

SAWT2747-2A 903667

SAWT3563-2A 903682

SAWT5195-2A 903679

SAW2747-4A 903678A

SAW3563-4A 903665A

SAW5195-4A 903666A

SAWT2747-4A 903668A

SAWT3563-4A 903683A

SAWT5195-4A 903669A