A06_Pumper_body_specs.doc

Specifications for 3600 Gallon Septic vacuum tank.

Standard Equipment and Additional Attachment Specifications Listed Below Minimum Requirements:

This requirement is for one (1) 3600-gallon 2 compartment Steel Septic Roll Off Type Vacuum Tank Unit must be compatible with a 65,000-pound hook lift.

The minimum specifications are as follows:

Standard Equipment

Specifications:

Tank:

Capacity – 3600-gallon Steel Two Compartment 2600/1000

72” OD x 204” shell plus heads 228” OAL (190” CA)

Two waste baffles

Standard Full-length Skid Mount frame

One (1) 20” Primary Shutoff w/Steps

One (1) 20” Top manway for Waste Compartment w/Steps

One (1) 20” Top manway for Water Compartment w/Steps

One (1) 10 Gallon Secondary

One (1) 5 Gallon Oil Catch Muffler

One (1) 36” Rear Manway

2” Water Fill inlet in top front of tank

Outlet: 6” discharge with brass valve and camlock adapter and dust cap with Valve

Inlet: 4” load with riser and stainless-steel deflector, 3” adaptor, brass valve with camlock adapter and dust cap on Curb Side/Rear Head

Vacuum Pump: NVE Challenger Series 607 Pro Belt Deutz Engine Package Vacuum Pump w/380 CFM free air (or equal). Includes Pump, 45.6 HP Deutz Engine w/Tachometer (or equal), Electric Start, 23-gallon Fuel Tank, 12 Volt High Capacity Battery

Water Pump: Burkes DC10 4.5 GPM, 45 PSI water pump (or equal) with 50’ of ¾” hose mounted on a hose reel with spray nozzle.

Additional Features: 2 (two) Hose Hooks on Rear Head. Standard DOT LED light package including work lights and Yellow Strobe.

Hose: 100’ of 3” Suction Hose and 10’ of 6” Discharge Hose both with camlock coupler ends.

Level Indicator: 3 – 5” sight glass in rear and ½” Site Tube for Water in front.

Exterior Finish: Sand Blasted, Primed and Painted white.

Skid:

· Tank package shall be skid mounted for use on a 65,000 pound hook lift.

· Provide ground rollers at rear of skid.

· Jib height on skid shall be industry standard.

Standard Warranty & Coverage

12 Month/Unlimited Hours or vendor standard whichever is greater.

Replacement parts for the unit must be readily available. Units for which parts must be ordered from sources outside the United States, and which may be subject to delivery delays due to customs or other logistical issues will not be considered. All replacement parts must be currently in production and deliverable within 30 calendar days after receipt of order.

Delivery:

Price must include delivery to:

Death Valley National Park

579 Cow Creek Rd.

Death Valley, CA. 92328

Attention Maintenance

Delivery between Monday & Thursday 6:00am to 4:30pm

Delivery must be coordinated 24 hours before arrival.

Contact for delivery is Chris Bradley (760) 786-3268 / chris_bradley@nps.gov

Alternate Contact is Andrew Becraft (760) 786-3296 / andrew_becraft@nps.gov

Death Valley National Park

Facility Management

579 Cow Creek Rd.

Death Valley, CA. 92328

National Park Service

U.S. Department of the Interior