A06 ELECTRICAL AND ELECTRONIC SOLDERING STANDARDS SPECIFICATIONS.pdf
PDF 13 KB Posted
- Attached to
- BATTERY LOAD TESTERS Federal contract opportunity
- Solicitation number
- 140G0120Q0308
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140G0120Q0308_Amd_0001.pdf | ||
| A06 Drawings.pdf | ||
| A06 WORKMANSHIP SPECIFICATIONS.pdf | ||
| Sol_140G0120Q0308.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
HIF-S-04D
09-07-10
HIF SPECIFICATION
FOR
ELECTRICAL AND ELECTRONIC SOLDERING STANDARDS
HIF-S-04
10-28-02
ABSTRACT:
This document defines electrical and electronic soldering requirements to be utilized by the U.S. Geological Survey for use in its Hydrologic Instrumentation Program.
U.S. Department of the Interior, U.S. Geological Survey Water Resources Division
Hydrologic Instrumentation Facility Stennis Space Center, Mississippi
HIF-S-04D
09-07-10
Except as noted below, soldering for the Hydrologic Instrumentation Facility (HIF) of the U.S. Geological Survey shall conform to the standards set forth in ANSI/J-STD-001.
Page 1, paragraph 1.2: “such as life support systems and critical weapons systems” shall read “such as life support systems. (Unless otherwise specified by the HIF, HIF products shall be deemed to be in class 3.)”
Section 1
Page 3, paragraph 2.2.2 Military: (delete)
Page 4, paragraph 4.1: “Solder composition Sn60, Sn62, Sn63, solder form optional” shall read “Unless otherwise specified by the HIF, solder composition shall be Sn63, solder form optional.”
Section 4
Page 19, paragraph 9.2.5.3: “Exposed basis metal caused by cutting of component leads after soldering is permissible” shall read “Exposed basis metal caused by cutting of component leads after soldering is not permissible.”
Section 9
File details come from the government source that posted it. Updated .