A06_Drawings_100_CDs_NEPE_V16.pdf

C:\Users\mekerr\OneDrive - DOI\___Admin items for sharing__Public\Current Projects Update\NEPE - update folder\NEPE_V16.dwg, 9/16/2024 11:50:24 AM, _AutoCAD PDF (General Documentation).pc3

C:\Users\mekerr\OneDrive - DOI\___Admin items for sharing__Public\Current Projects Update\NEPE - update folder\NEPE_V16.dwg, 9/16/2024 11:51:09 AM, _AutoCAD PDF (General Documentation).pc3

AutoCAD SHX Text

BASIC DATA:

AutoCAD SHX Text

STATE

AutoCAD SHX Text

NATIONAL PARK SERVICE

AutoCAD SHX Text

PACIFIC WEST REGIONAL OFFICE

AutoCAD SHX Text

REGION

AutoCAD SHX Text

COUNTY

AutoCAD SHX Text

DEPARTMENT OF THE INTERIOR

AutoCAD SHX Text

UNITED STATES

AutoCAD SHX Text

LOCATION WITHIN PARK

AutoCAD SHX Text

NAME OF PARK

AutoCAD SHX Text

TITLE OF PROJECT

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

PMIS/PKG NO.

AutoCAD SHX Text

OF

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

RESTROOM REMODEL

AutoCAD SHX Text

VISITOR CENTER

AutoCAD SHX Text

NEZ PERCE COUNTY

AutoCAD SHX Text

ID

AutoCAD SHX Text

CONSTRUCTION DRAWINGS

AutoCAD SHX Text

NEZ PERCE N.H.P.

AutoCAD SHX Text

PACIFIC WEST

AutoCAD SHX Text

IDAHO

AutoCAD SHX Text 193561

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 194369

AutoCAD SHX Text

AutoCAD SHX Text & AND AND @ AT AT # NUMBER NUMBER } PLUS OR MINUS ABA ARCHITECTURAL BARRIERS ACT ADDL ADDITIONAL AFF ABOVE FINISH FLOOR AHJ AUTHORITY HAVING JURISDICTION ALUM ALUMINUM BD BOARD BED BEDROOM BLDG BUILDING BLKG BLOCKING B.O. BOTTOM OF BOTTOM OF CENTERLINE CENTERLINE CB CEMENTITIOUS BOARD CJ CONTROL JOINT CLG CEILING CL CLOSET CLR CLEAR(ANCE) CMU CONCRETE MASONRY UNIT(S) C.O. CONTRACTING OFFICER CONTRACTING OFFICER COL(S) COLUMN(S) CONC CONCRETE CONT CONTINUOUS CONSTR CONSTRUCTION CORR CORRIDOR CPT CARPET CT CERAMIC TILE D DRYER DIA DIAMETER DIM DIMENSION DR DOOR DS DOWNSPOUT DW DISHWASHER (E) EXISTING EXISTING EA EACH EL ELEVATION ELEC ELECTRIC(AL) EQ EQUAL EQUIP EQUIPMENT EXT EXTERIOR FD FLOOR DRAIN FE FIRE EXTINGUISHER FEC FIRE EXTINGUISHER CABINET FF FINISH FLOOR FG FIBERGLASS DRAIN PAN FIG FIGURE FIN FINISH(ED) FLR FLOOR FN FURNACE F.O. FACE OF FACE OF FOS FACE OF STUD, SLAB FRP FIBER REINFORCED PLASTIC GA GAUGE, GYPSUM ASSOCIATION GALV GALVANIZE(D) GB GRAB BAR GYP GYPSUM GWB GYPSUM WALL BOARD HM HOLLOW METAL HR HOUR HVAC HEATING, VENTILATION, AND AIR CONDITIONING IBC INTERNATIONAL BUILDING CODE ICC INTERNATIONAL CODE COUNCIL INFO INFORMATION INT INTERIOR IRC INTERNATIONAL RESIDENTIAL CODE MANUF MANUFACTURER MAX MAXIMUM MECH MECHANICAL MEP MECHANICAL, ELECTRICAL AND PLUMBING MDF MEDIUM DENSITY FIBERBOARD MIL MILLIMETER MIN MINIMUM MIRR MIRROR(ED) MTD MOUNTED MTL METAL

AutoCAD SHX Text

(N) NEW NEW NA NOT APPLICABLE NFPA NATIONAL FIRE PROTECTION ASSOCIATION NO NUMBER NPS NATIONAL PARK SERVICE NR NON-RATED O.C. ON CENTER ON CENTER OFOI OWNER FURNISH/OWNER INSTALL OH OVERHEAD OPP OPPOSITE OSB ORIENTED STRAND BOARD OTS OPEN TO STRUCTURE PERF PERFORATE(D) PL PLATE, PROPERTY LINE PLAM PLASTIC LAMINATE PT PRESSURE TREATED, PAINT PTD PAINTED PV PHOTOVOLTAIC PVC POLYVINYL CHLORIDE RCP REFLECTED CEILING PLAN REF REFRIGERATOR, REFERENCE REQD REQUIRED REV REVERSE(D) RO ROUGH OPENING RS RESILIENT SHEET GOODS RWB RESILIENT WALL BASE

AutoCAD SHX Text

ABBREVIATIONS

AutoCAD SHX Text 46°26'50.51"N 116°49'23.78"W

AutoCAD SHX Text ADOPTED CODES: 2024 INTERNATIONAL BUILDING CODE (IBC) 2021 INTERNATIONAL FIRE CODE (IFC) 2017 INTERNATIONAL ELECTRICAL CODE (NEC) 2021 INTERNATIONAL ENERGY CONSERVATION CODE (IECC): (INCLUDING LOCAL CODES AND AMENDMENTS) SINGLE USE OCCUPANCY CLASSIFICATION: A-3 ASSEMBLY MIXED USE OCCUPANCY CLASSIFICATIONS: NONE NON-SEPARATED USE: NO SEPARATED (FIRE BARRIER): NO FIRE SEPARATED: NO AREA OF INTERIOR REMODEL 480 SF TYPE OF CONSTRUCTION PER IBC 2015: IIIB FIRE ALARM SYSTEM: YES AUTOMATIC FIRE SPRINKLERS: YES NUMBER OF STORIES: 1

AutoCAD SHX Text

CODE SUMMARY

AutoCAD SHX Text SAMF SELF-ADHERED MEMBRANE FLASHING SC SOLID CORE SF SQUARE FEET SIM SIMILAR SPEC SPECIFICATION(S) STC SOUND TRANSMISSION CLASS STD STANDARD STOR STORAGE STRUCT STRUCTURAL T TEMPERED, TREAD TBD TO BE DETERMINED TEL TELEPHONE THK THICK TJI TRUSS JOIST I-JOIST T.O. TOP OF TOP OF TYP TYPICAL UL UNDERWRITER'S LABORATORY UNO UNLESS NOTED OTHERWISE UTIL UTILITY VRFY VERIFY W WASHER W/ WITH WASO WASHINGTON, D.C. AREA SERVICE OFFICE WD WOOD WH WATER HEATER WIN WINDOW WR WATER RESISTANT WRB WEATHER RESISTANT BARRIER W/D WASHER AND DRYER

AutoCAD SHX Text

1. THE CONTRACTOR SHALL VERIFY ALL DIMENSIONS, EXISTING UTILITIES, FIXTURES AND CONDITIONS THE CONTRACTOR SHALL VERIFY ALL DIMENSIONS, EXISTING UTILITIES, FIXTURES AND CONDITIONS AT THE SITE. CONFLICTS BETWEEN THE DRAWINGS AND ACTUAL SITE CONDITIONS SHALL BE BROUGHT TO THE ATTENTION OF AND RESOLVED WITH THE CONTRACTING OFFICER 2. DO NOT SCALE DRAWINGS: USE DIMENSIONS SHOWN. ALL DIMENSIONS SHALL BE VERIFIED IN THE DO NOT SCALE DRAWINGS: USE DIMENSIONS SHOWN. ALL DIMENSIONS SHALL BE VERIFIED IN THE FIELD. DIMENSIONS SHOWN AT (E) CONDITIONS ARE TO FACE OF (E) FINISH. DIMENSIONS OF (E) CONDITIONS ARE FOR REFERENCE ONLY AND SHALL BE VERIFIED BY THE CONTRACTOR IN THE FIELD. WHERE NO DIMENSION IS PROVIDED CONSULT WITH THE CONTRACTING OFFICER FOR CLARIFICATION BEFORE PROCEEDING WITH AFFECTED WORK. ALL DIMENSIONS ARE TO THE FACE OF GYP WALL, CENTERLINE OF COLUMNS, FACE OF CONCRETE WALLS, FACE OF CMU WALLS, CENTERLINE OF FIXTURES, AND CENTERLINE OF OPENINGS, UNLESS OTHERWISE NOTED. 3. CONTRACTOR SHALL PROVIDE BACKING/BLOCKING AS REQUIRED FOR THE PROPER ANCHORAGE CONTRACTOR SHALL PROVIDE BACKING/BLOCKING AS REQUIRED FOR THE PROPER ANCHORAGE OF ALL WALL ATTACHED ITEMS SUCH AS TOILET ACCESSORIES, WALL-MOUNTED FIXTURES, DOOR STOPS, ETC. 4. THE CONTRACTOR IS RESPONSIBLE FOR ADVANCED REVIEW OF THE WORK REQUIRED IN THE THE CONTRACTOR IS RESPONSIBLE FOR ADVANCED REVIEW OF THE WORK REQUIRED IN THE CONSTRUCTION DOCUMENTS AND THE REQUIREMENTS FOR EXECUTING IT PROPERLY. IF THE CONTRACTOR FINDS DISCREPANCIES IN THE CONSTRUCTION DOCUMENTS OR SPECIFICATIONS, THEN THE CONTRACTOR SHALL NOTIFY THE CONTRACTING OFFICER IMMEDIATELY. THE CONTRACTOR SHALL WORK TO HAVE ALL DISCREPANCIES RESOLVED WELL IN ADVANCE OF ACTUAL CONSTRUCTION OCCURRING. NO CLAIMS FOR NO CLAIMS FOR EXTRA COMPENSATION FOR WORK THAT COULD HAVE BEEN FORESEEN BY SUCH INSPECTION, WHETHER SHOWN ON CONTRACT DOCUMENTS OR NOT, SHALL BE ACCEPTED OR PAID. 5. ALL CONSTRUCTION AND INSTALLATION WORK SHOWN ON DRAWINGS SHALL BE DONE IN ALL CONSTRUCTION AND INSTALLATION WORK SHOWN ON DRAWINGS SHALL BE DONE IN ACCORDANCE WITH ALL APPLICABLE CODES AND ORDINANCES. USE METHODS AS REQUIRED TO COMPLETE WORK WITHIN LIMITATIONS OF ALL PREVAILING LAWS AND CODES. IN CASE OF DISCREPANCIES BETWEEN THE CONSTRUCTION DOCUMENTS, REFERENCED STANDARDS AND THE GOVERNING CODES, THE CONTRACTING OFFICER WILL DETERMINE WHICH SHALL GOVERN. DISCREPANCIES SHALL BE BROUGHT TO THE ATTENTION OF AND RESOLVED WITH THE CONTRACTING OFFICER BEFORE PROCEEDING WITH THE WORK. 6. REPETITIVE FEATURES NOTED TYPICAL ON THE DRAWINGS SHALL BE COMPLETELY PROVIDED AS IF REPETITIVE FEATURES NOTED TYPICAL ON THE DRAWINGS SHALL BE COMPLETELY PROVIDED AS IF DRAWN IN FULL. REPETITIVE FEATURES NOT NOTED ON THE DRAWINGS SHALL BE COMPLETELY PROVIDED AS IF NOTED IN FULL. 7. CONTRACTOR SHALL VERIFY AND COORDINATE THE SIZE AND LOCATION OF ALL OPENINGS FOR CONTRACTOR SHALL VERIFY AND COORDINATE THE SIZE AND LOCATION OF ALL OPENINGS FOR MECHANICAL, ELECTRICAL, AND PLUMBING WORK AND EQUIPMENT WITH EACH TRADE. 8. INSTALL METAL TRIM ON ALL GYPSUM BOARD EDGES ABUTTING OTHER MATERIALS AND WHERE INSTALL METAL TRIM ON ALL GYPSUM BOARD EDGES ABUTTING OTHER MATERIALS AND WHERE GYPSUM BOARD IS STOPPED SHORT OF OTHER MATERIALS TO FORM A RECESS OR REVEAL. 9. VERIFY THAT REQUIRED OPERATION AND MAINTENANCE CLEARANCES ARE PROVIDED FOR ALL VERIFY THAT REQUIRED OPERATION AND MAINTENANCE CLEARANCES ARE PROVIDED FOR ALL EQUIPMENT ITEMS. INSTALL ALL ITEMS IN ACCORDANCE WITH THE MANUFACTURER'S WRITTEN INSTRUCTIONS EXCEPT WHEN IN CONFLICT WITH THE SPECIFICATIONS HEREIN, IN WHICH CASE THE MORE STRINGENT REQUIREMENTS SHALL BE COMPLIED WITH. NOTIFY THE CONTRACTING OFFICER IN WRITING OF ANY CONFLICTS. 10. CONTRACTOR SHALL COORDINATE AND SCHEDULE ALL REQUIRED UTILITY SHUT-DOWNS WITH CONTRACTOR SHALL COORDINATE AND SCHEDULE ALL REQUIRED UTILITY SHUT-DOWNS WITH CONTRACTING OFFICER AND PARK POINT OF CONTACT, NOTIFY CONTRACTING OFFICER OF INTENDED SHUTDOWN AT LEAST 48 HOURS PRIOR TO SCHEDULED SHUTDOWN. 11. CONTRACTOR SHALL IMMEDIATELY NOTIFY CONTRACTING OFFICER IF HAZARDOUS MATERIAL IS CONTRACTOR SHALL IMMEDIATELY NOTIFY CONTRACTING OFFICER IF HAZARDOUS MATERIAL IS ENCOUNTERED DURING DEMOLITION OR CONSTRUCTION. REMOVAL AND DISPOSAL OF HAZARDOUS MATERIALS SHALL BE ACCOMPLISHED IN COMPLIANCE WITH STATE REGULATIONS. IT IS NOT ANTICIPATED THAT ASBESTOS OR OTHER HAZARDOUS MATERIALS ARE PRESENT IN THE AREA OF WORK. 12. ALL WASTE AND REFUSE CAUSED IN CONNECTION WITH THE WORK SHALL BE REMOVED FROM ALL WASTE AND REFUSE CAUSED IN CONNECTION WITH THE WORK SHALL BE REMOVED FROM THE PREMISES AND DISPOSED OF BY THE CONTRACTOR. THE PREMISES SHALL BE LEFT CLEAR AND CLEAN TO THE SATISFACTION OF THE CONTRACTING OFFICER. COORDINATE THE AVAILABILITY AND LOCATION OF RECYCLING DUMPSTER AND TRASH DUMPSTER WITH CONTRACTING OFFICER. TRASH SHALL BE DISPOSED OF AS REQUIRED BY LOCAL AUTHORITY HAVING JURISDICTION (AHJ). 13. IT IS CONTRACTORS RESPONSIBILITY TO REMOVE, PROTECT AND SAFELY STORE FIXTURES AND/OR IT IS CONTRACTORS RESPONSIBILITY TO REMOVE, PROTECT AND SAFELY STORE FIXTURES AND/OR EQUIPMENT AS NOTED IN PLANS AND SPECIFICATIONS. 14. SAFETY MEASURES: AT ALL TIMES THE CONTRACTOR SHALL BE SOLELY RESPONSIBLE FOR THE SAFETY MEASURES: AT ALL TIMES THE CONTRACTOR SHALL BE SOLELY RESPONSIBLE FOR THE CONDITIONS AT THE JOB SITE, INCLUDING SAFETY OF PEOPLE AND PROPERTY. CONTRACTING OFFICER SITE VISITS ARE NOT INTENDED TO REVIEW THE ADEQUACY OF THE CONTRACTOR'S SAFETY MEASURES. 15. INSTALL MANUFACTURED MATERIALS AND EQUIPMENT PER MANUFACTURER'S RECOMMENDATIONS INSTALL MANUFACTURED MATERIALS AND EQUIPMENT PER MANUFACTURER'S RECOMMENDATIONS AND INSTRUCTIONS, UNLESS OTHERWISE INSTRUCTED. 16. APPLICATION OF FINISH: SURFACES PREVIOUSLY PREPARED OR INSTALLED BY ANOTHER TRADE APPLICATION OF FINISH: SURFACES PREVIOUSLY PREPARED OR INSTALLED BY ANOTHER TRADE SHALL BE INSPECTED CAREFULLY BY THE CONTRACTOR BEFORE APPLYING SUBSEQUENT MATERIALS OR FINISHES. IF SURFACES ARE NOT ACCEPTABLE, THE CONTRACTING OFFICER SHALL BE NOTIFIED IMMEDIATELY IN ORDER THAT CORRECTIONS MAY BE MADE. APPLICATIONS OF FINISHES WILL BE CONSTRUED AS ACCEPTANCE OF RESPONSIBILITY BY THE SUBCONTRACTOR FOR THE BASE UPON WHICH IT IS APPLIED. 17. REFER TO SPECIFICATIONS FOR ADDITIONAL INFORMATION. THE DRAWINGS AND SPECIFICATIONS REFER TO SPECIFICATIONS FOR ADDITIONAL INFORMATION. THE DRAWINGS AND SPECIFICATIONS ARE INTENDED TO BE COMPLEMENTARY. CONFLICTS BETWEEN VARIOUS ELEMENTS OF THE DRAWINGS, SPECIFICATIONS, NOTES AND DETAILS SHALL BE BROUGHT TO THE ATTENTION OF THE CONTRACTING OFFICER AND RESOLVED BEFORE PROCEEDING WITH WORK. 18. CONTRACTOR TO PERFORM DEMOLITION AS REQUIRED FOR INSTALLATION OF NEW WORK. CONTRACTOR TO PERFORM DEMOLITION AS REQUIRED FOR INSTALLATION OF NEW WORK. DEMOLITION DRAWINGS ARE NOT INCLUSIVE OF EVERY CONDITION THAT MAY BE ENCOUNTERED 19. PROTECT AREAS OUTSIDE AREA OF WORK FROM DAMAGE DURING CONSTRUCTION. PROTECTION PROTECT AREAS OUTSIDE AREA OF WORK FROM DAMAGE DURING CONSTRUCTION. PROTECTION REQUIREMENTS INCLUDE THE INSTALLATION OF PHYSICAL BARRIERS TO RESTRICT ACCESS TO, AND PREVENT DAMAGE FROM, CONSTRUCTION ACTIVITIES RELATED TO THIS WORK. PROTECTION SHALL BE OF REQUIRED SIZE AND THICKNESS TO WITHSTAND IMPACT FROM FALLING DEBRIS, ROLLING EQUIPMENT, AND DELIVERY OF MATERIALS. BARRIER MATERIALS ARE TO BE INSTALLED WITHOUT ATTACHMENT DIRECTLY TO ADJACENT HISTORIC BUILDINGS, SURFACE, OR SITE WORK. PROTECT EXISTING SITE IMPROVEMENTS, APPURTENANCES, AND LANDSCAPING. COVER AND PROTECT FURNITURE, FURNISHINGS, SUPPLIES, AND EQUIPMENT THAT HAVE NOT BEEN REMOVED. PROVIDE TEMPORARY WEATHER PROTECTION TO ENSURE THAT NO WATER LEAKAGE OR DAMAGE OCCURS TO STRUCTURE OR INTERIOR AREAS OF EXISTING BUILDING. 20. PATCH AND REFINISH ALL (E) SURFACES AFFECTED BY DEMO AND NEW WORK.PATCH AND REFINISH ALL (E) SURFACES AFFECTED BY DEMO AND NEW WORK.

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

PLAN NORTH

AutoCAD SHX Text

DOOR SYMBOL

AutoCAD SHX Text

DETAIL: DETAIL NUMBER SHEETS SYMBOL OCCURS ON SHEET SYMBOL REFERENCES

AutoCAD SHX Text

NORTH ARROW

AutoCAD SHX Text

AutoCAD SHX Text

PLAN NORTH

AutoCAD SHX Text

ELEVATION: ELEVATION NUMBER SHEETS SYMBOL OCCURS ON SHEET SYMBOL REFERENCES

AutoCAD SHX Text

AutoCAD SHX Text A3

AutoCAD SHX Text

XX

AutoCAD SHX Text X

AutoCAD SHX Text

SYMBOLS

AutoCAD SHX Text COVER SHEET A1 TYP ACCESSIBLE DETAILS TYP ACCESSIBLE DETAILS A2 DEMOLITION PLANS DEMOLITION PLANS A3 DEMOLITION REFLECTED CEILING PLAN DEMOLITION REFLECTED CEILING PLAN A4 NEW FLOOR PLAN NEW FLOOR PLAN A5 NEW REFLECTED CEILING NEW REFLECTED CEILING A6 INTERIOR DETAILS (1 OF 2) INTERIOR DETAILS (1 OF 2) A7 INTERIOR DETAILS (2 OF 2) INTERIOR DETAILS (2 OF 2) A8 WALL AND CEILING DETAILS WALL AND CEILING DETAILS A9 SCHEDULES SCHEDULES

AutoCAD SHX Text

SHEET INDEX

SHEET INDEX

VERTICAL CHANGES IN LEVEL

BEVELED CHANGES IN LEVEL

1/4

MA

X 1/2

" M

AX

NAPKIN /

TAMPON

DISPOSAL

54" MIN.

36" GRAB BAR

12" MAX.

39" - 41" MIN.

9"

" T

O B

O

TT

O M

7" - 9"

42" GRAB BAR

TOILET PAPER

DISPENSER

WALL HUNG

TOILET (W.C.)

" M

IN

. T

O B

O T.

" M

AX

. T

O T

O P

6"

TO

P

O F

G R

AB

B

AR

(I

.C .C

. 6

.4

1"

BO

T.

O F

G R

AB

B

AR

(I

.C .C

. 6

.5 .1

" M

IN

" M

AX

SEAT COVER

DISPENSER

" M

AX

9"

16" - 18" 17" - 19"

6" 36" MIN.

MIRROR

" M

IN

" M

AX

" M

AX

3' -3

" M

AX

SOAP

DISPENSER

LAVATORY

INSULATE SINK PIPES

" M

IN

" M

AX

15" MIN.

SO

AP

A N

D P

AP

ER

TO

W

EL

D

IS

PE

N

SE

R S

CENTERLINE

OF

EDGE OF

DISPENSER

SINK TO

/2

DISPENSER/

WASTE

RECEPTACLE 40

NAPKIN/

TAMPON

DISPENSER

NAPKIN/

TAMPON

DISPOSAL

1 3/4" = 1'-0"

MOUNTING HEIGHTS

603 TOILET AND BATHING ROOMS:

1.) 603.2.1 TURNING SPACE:

A TURNING SPACE COMPLYING WITH 304 SHALL BE PROVIDED WITHIN THE ROOM.

2.) 603.2.2 OVERLAP:

CLEAR FLOOR SPACES, CLEARANCES AT FIXTURES, AND TURNING SPACES SHALL

BE PERMITTED TO OVERLAP.

3.) 603.2.3 DOOR SWING:

DOORS SHALL NOT SWING INTO THE CLEAR FLOOR SPACE OR CLEARANCE FOR

ANY FIXTURE.

EXCEPTIONS:

1.) DOORS TO A TOILET AND BATHING ROOM FOR A SINGLE OCCUPANT.

ACCESSED ONLY THROUGH A PRIVATE OFFICE AND NOT FOR COMMON USE

OR PUBLIC USE HALL BE PERMITTED TO SWING INTO THE CLEAR FLOOR

SPACE. PROVIDED THE SWING OF THE DOOR CAN BE REVERSED TO MEET

SECTION 603.2.3

2 3/4" = 1'-0"

RESTROOM SIGNAGE

6' -8

" M

IN

. H

EI

G H

T

32" MIN. CLEAR

FLOORFLOOR

FLOOR

PROVIDE LEVER TYPE HANDLE

DOOR LATCH WITH OPENING

FORCE OF 5 LBS. MAX.

(INTERIOR DOOR), DOOR

HANDLES SHALL NOT REQUIRE

TIGHT GRASP, PINCHING OR

TWISTING OF WRIST TO OPERATE

NOTES:

PROVIDE AT H.C. TOILET ROOM

(MOUNT CENTERED ON DOOR)

MEN

6"

8"

1" 4" 3 1/

2"

MOUNT WITH

DOUBLE

BACK TAPE

3/4" HIGH WHITE

TACTILE LETTERS w/

BRAILLE CHARACTERS

1/2" RADIUS

CORNERS,

TYPICAL

WHITE GRAPHIC

SYMBOLS AT

RESTROOMS WITH

1/4" GRAY PLASTIC

LAMINATE WITH

POLISHED EDGES

MEN

5' -4

" M

AX

5 1 1/2" = 1'-0"

ABAAS GRABBAR ATTACHMENT 6 N.T.S.

SIGNAGE

CENTERLINE OF DOOR AND SIGN

5'-0"

A.F.F.

MEN / WOMEN OR UNISEX AS REQUIRED PER PLAN

SEE PLAN FOR SIGNAGE LOCATIONS

C

EN

TE

R

LI

N

E O

F

SI

G N

RESTROOM SIGNAGE

NOTE: IDENTIFICATION SYMBOLS

PER ADA SECTION 4.30 SIGNAGE

INTERNATIONAL SYMBOL OF ACCESSIBILITY

IBC SECTION 1110 - SIGNAGE

1110.1 SIGNS

7.) UNISEX TOILETS AND BATHING ROOMS

ICC ANSI 117.1

703.5 PICTOGRAMS

703.5.2 PICTOGRAM FIELD. PICTOGRAMS SHALL HAVE A

6 INCH FIELD MIN. IN HEIGHT.

703.6 SYMBOLS OF ACCESSIBILITY

" M

IN

" M

AX

IC

C

.5

" M

AX

IC

C

.3

" M

IN

IC

C

.3 .3

6 MAX.

PER ICC 306.2.4

LEVER

VALVE

M

IR

R O

R (S

AF

ET

Y G

LA

ZI

N G

8" MIN.

11" MIN.

KNEE

CLEARANCE

9" M

IN

PIPING

17" MAX.

17" MIN. - 25" MAX.

KNEE/TOE

CLEARANCE

3 3/4" = 1'-0"

ABAAS CLEARANCE

NOTES:

1.) TOE CLEARANCE 30" MINIMUM IN WIDTH

2.) KNEE CLEARANCE 30" MINIMUM IN WIDTH

3.) CONTRASTING COLOR BETWEEN COUNTER TOP AND FLOORING.

4.) CLEAR KNEE SPACE TO BE 29" A.F.F. MIN.

SEE DETAIL

DETAIL

ELEVATION

IC

C

6.

2.

PROTECTED

ICC 606.6

32" MIN.

4 3/8" = 1'-0"

DOOR CLEARANCE

" M

AX

32" MIN.

36" MIN.

32" MIN.

ACCESSIBLE PER ICC 604.2

AMBULATORY PER ICC 604.2

12" MIN. 24" MIN.

FLUSH HANDLE

ON WIDE SIDE

OF STALL OR

ROOM

6"

I.C .C

. 6

.4

I.C .C

. 6

.4

42" MIN.

18" VERT.

GRAB BAR

24" MIN.

GRAB BARS PER I.B.C. 1110.2.2.4GRAB BAR SECTION

1 1/2" MAX. 1 1/4" - 2" MAX.

PER I.C.C. 609.2.1

METAL STUDS PER PLAN

16GA. METAL STUD

BLKG. w/ 1- A35

CLIP TOP AND BOTTOM

1/4"Ø SHEET METAL

SCREWS TO METAL

BLOCKING

1 1/4"Ø GRAB BAR

SEE 5/A4.01

BACKING

DETAIL

1.) 604.5.1 FIXED WALL GRAB BARS:

FIXED SIDEWALL GRAB BARS SHALL BE 42 INCHES MIN. IN LENGTH, LOCATED 12 INCHES

MAX. FROM THE REAR WALL AND EXTENDING 54 INCHES MIN. FROM THE REAR WALL IN

ADDITION, A VERTICAL GRAB BAR 18 INCHES MIN. IN LENGTH SHALL BE MOUNTED WITH

THE BOTTOM OF THE BAR LOCATED BETWEEN 39 INCHES ABD 41 INCHES ABOVE THE FLOOR,

AND 41 INCHES FROM THE REAR WALL.

2.) 604.5.2 REAR WALL GRAB BARS:

3.) 609.1 GENERAL:

GRAB BARS IN ACCESSIBLE TOILET OR BATHING FACILITIES SHALL COMPLY WITH SECTION 1110

4.) 609.2.1 CIRCULAR CROSS SECTION:

GRAB BARS WITH A CIRCULAR CROSS SECTION SHALL HAVE A OUTSIDE DIAMETER OF

1 1/4" MIN. AND 2 INCHES MAX.

5.) 609.2.2 NON-CIRCULAR CROSS SECTION:

GRAB BARS WITH A NON-CIRCULAR CROSS SECTION SHALL HAVE A CROSS SECTION DIMENSION

OF 2 INCHES MAX. AND PERIMETER DIMENSION OF 4 INCHES MIN. AND 4.8 INCHES MAX.

6.) 609.2.3 SPACING:

WALL AND THE GRAB BARS AND PROJECTING OBJECTS BELOW AND AT THE ENDS OF GRAB BARS

SHALL BE 1 1/2" MIN. THE SPACE BETWEEN THE GRAB BAR AND PROJECTING OBJECTS ABOVE

THE SPACE BETWEEN THE WALL AND THE GRAB BAR SHALL BE 1 1/2". THE SPACE BETWEEN THE

THE GRAB BAR SHALL BE 12" MIN.

7.) 609.4 POSITION OF GRAB BARS:

GRAB BARS SHALL BE INSTALLED IN A HORIZONTAL POSITION, 33 INCHES MIN. AND 36 INCHES MAX. ABOVE THE FLOOR MEASURED TO THE TOP OF THE GRIPPING SURFACE. AT WATER CLOSETS

PRIMARILY FOR CHILDREN USE COMPLYING WITH SECTION 604.10, GRAB BARS SHALL BE

INSTALLED IN A HORIZONTAL POSITION 18" MIN. AND 27" MAX. ABOVE THE FLOOR MEASURED

TO THE TOP OF GRIPPING SURFACE.

8.) 609.5 SURFACE HAZARDS:

GRAB BARS, AND ANY WALL OR OTHER SURFACES ADJACENT TO GRAB BARS, SHALL BE FREE

OF SHARP OR ABRASIVE ELEMENTS. EDGES SHALL BE ROUNDED.

THE REAR WALL GRAB BAR SHALL BE 36" MIN. IN LENGTH AND EXTEND FROM THE

CENTERLINE OF THE WATER CLOSET 12" MIN. ON THE SIDE OF CLOSET TO WALL AND

24 INCHES MIN. ON THE TRANSFER SIDE.

9.) 609.6 FITTINGS:

GRAB BARS SHALL NOT ROTATE WITHIN THEIR FITTINGS.

2.) WHERE THE ROOM IS FOR INDIVIDUAL USE AND A CLEAR FLOOR SPACE

COMPLYING WITH SECTION 305.3 IS PROVIDED WITHIN THE ROOM BEYOND THE

ARC OF THE DOOR SWING.

4.) 603.3 MIRRORS:

WITH THE BOTTOM EDGE 40 INCHES MAX. ABOVE THE FLOOR. MIRRORS NOT

5.) 603.4 COAT HOOKS AND SHELVES:

6.) 604.1 GENERAL:

MIRRORS LOCATED ABOVE LAVATORIES, SINKS OR COUNTERS SHALL BE MOUNTED

LOCATED ABOVE LAVATORIES, SINKS OR COUNTERS HALL BE MOUNTED WITH THE

BOTTOM EDGE OF THE REFLECTING SURFACE 35 INCHES MAX. ABOVE THE FLOOR.

COAT HOOKS SHALL BE LOCATED WITHIN ONE OF THE REACH SPECIFIED

IN SECTION 308. SHELVES SHALL BE 40 INCHES MIN. AND 48 INCHES MAX.

ABOVE THE FLOOR.

SECTION 604. COMPARTMENTS CONTAINING MORE THAN ONE PLUMBING FIXTURE

SHALL COMPLY WITH SECTION 603. WHEELCHAIR ACCESSIBLE COMPARTMENTS

ACCESSIBLE WATER CLOSETS AND TOILET COMPARTMENTS SHALL COMPLY WITH

SHALL COMPLY WITH SECTION 604.8 AMBULATORY ACCESSIBLE COMPARTMENTS

SHALL COMPLY WITH SECTION 604.9

7.) 604.2 LOCATION:

THE WATER CLOSET SHALL BE LOCATED WITH A WALL OR PARTITION TO THE REAR AND

TO ONE SIDE. THE CENTERLINE OF THE WATER CLOSET SHALL BE 16 INCHES MINIMUM

TO 18 INCHES MAXIMUM FROM THE SIDE WALL OR PARTITION. WATER CLOSET LOCATED

IN AMBULATORY ACCESSIBLE COMPARTMENTS SPECIFIED IN SECTION 604.9 SHALL HAVE

THE CENTERLINE OF THE WATER CLOSET 17 INCHES MAX. FOR THE SIDE OF WALL OR

PARTITION.

8.) 604.3 CLEARANCE:

9.) 604.3.1 SIZE:

A CLEARANCE AROUND A WATER CLOSET 60 INCHES MINIMUM, MEASURED PERPENDICULAR

FROM THE SIDE WALL, AND 56 INCHES MIN. MEASURED PERPENDICULAR FROM THE REAR

WALL, SHALL BE PROVIDED.

10.) 604.3.2 OVERLAP:

THE REQUIRED CLEARANCE AROUND THE WATER CLOSET SHALL BE PERMITTED TO

OVERLAP THE WATER CLOSET. ASSOCIATED GRAB BARS, PAPER DISPENSERS, SANITARY

NAPKIN RECEPTACLES, COAT HOOKS, SHELVES, ACCESSIBLE ROUTES. CLEAR FLOOR

SPACE AT OTHER FIXTURES AND THE TURNING SPACE. NO OTHER FIXTURES OR

OBSTRUCTIONS SHALL BE WITHIN THE REQUIRED WATER CLOSET CLEARANCES.

11.) 604.4 HEIGHT:

ABOVE THE FLOOR, MEASURED TO THE TOP OF THE SEAT. SEATS SHALL NOT BE SPRUNG

THE HEIGHT OF WATER CLOSET SEATS SHALL BE 17 INCHES MIN. AND 19 INCHES MAX.

TO RETURN TO A LIFTED POSITION.

FLOOR

L.L.C. 404 DOORS AND DOORWAYS:

1.) 404.1 GENERAL:

DOORS AND DOORWAYS THAT ARE PART OF AN ACCESSIBLE ROUTE SHALL COMPLY

WITH SECTION 404.

2.) 404.2 MANUAL DOORS:

MANUAL DOORS AND DOORWAYS AND MANUAL GATES, INCLUDING TICKET GATES,

SHALL COMPLY WITH THE REQUIREMENTS OF SECTION 404.2

3.) 404.2.1 DOUBLE-LEAF DOORS AND GATES:

AT LEAST ONE OF THE ACTIVE LEAVES OF DOORWAYS WITH TWO LEAVES SHALL

COMPLY WITH SECTIONS 404.2.2 AND 404.2.3

4.) 404.2.2 CLEAR WIDTH:

WIDTH OF DOORWAYS WITH SWINGING DOORS SHALL BE MEASURED BETWEEN THE FACE OF

THE DOOR AND STOP, WITH THE DOOR OPEN 90 DEGREES. OPENINGS DOOR AND DOORWAYS

WITHOUT DOORS MORE THAN 24 INCHES IN DEPTH SHALL PROVIDE A CLEAR OPENINGS

WIDTH OF 36 INCHES MIN. THERE SHALL BE NO PROJECTIONS INTO THE CLEAR

CLEAR OPENING WIDTH BETWEEN 34 INCHES AND 80 INCHES ABOVE THE FLOOR SHALL

NOT EXCEED 4 INCHES.

DOORWAYS SHALL HAVE A CLEAR OPENING WIDTH OF 32 INCHES MIN. CLEAR OPENING

OPENING WIDTH LOWER THAN 34 INCHES ABOVE THE FLOOR. PROJECTIONS INTO THE

EXCEPTIONS:

1.) DOOR CLOSER AND DOOR STOPS SHALL BE PERMITTED TO BE 78 INCHES MIN.

ABOVE THE FLOOR

2.) IN ALTERATIONS, PROJECTION OF 5/8 INCH MAX. INTO THE REQUIRED CLEAR

OPENING WIDTH SHALL BE PERMITTED FOR THE LATCH SIDE STOP.

5.) 404.2.3.5 FLOOR SURFACE:

FLOOR SURFACE WITHIN THE MANEUVERING CLEARANCES SHALL HAVE A SLOPE NOT

STEEPER THAN 1:48 AND SHALL COMPLY WITH SECTION 302

6.) 404.2.4 THRESHOLDS AT DOORWAYS:

IF PROVIDED THRESHOLD OR DOORWAYS SHALL BE 1/2 INCH MA.X IN HEIGHT.

RAISED THRESHOLDS AND CHANGES IN LEVEL AT DOORWAYS SHALL COMPLY WITH

SECTIONS 302 AND 303.

5.) CLEARANCE REDUCTION. BETWEEN 9" AND 27" ABOVE THE FLOOR, THE KNEE

CLEARANCE SHALL BE PERMITTED TO BE REDUCED AT A RATE OF 1" FOR EACH 6" IN HEIGHT.

REQUIRED ACCESSIBLE ELEMENTS HALL BE IDENTIFIED BY

THE INTERNATIONAL SYMBOL OF ACCESSIBILITY AT THE

FOLLOWING LOCATIONS.

703.5.1 GENERAL PICTOGRAMS SHALL COMPLY WITH

SECTION 703.5

CHARACTERS OR BRAILLE SHALL NOT BE LOCATED IN THE

PICTOGRAMS FIELD.

TABLE 404.2.3.1 MANEUVERING AT MANUAL SWINGING DOORS

TYPE OF USE MINIMUM MANEUVERING CLEARANCES

APPROACH DIRECTION

DOOR SIDE

PERPENDICULAR TO DOORWAY

PARALLEL TO DOORWAY

(BEYOND LATCH UNLESS NOTED)

FROM START

FROM START

FROM HINGE SIDE

FROM HINGE SIDE

FROM HINGE SIDE

FROM LATCH SIDE

FROM LATCH SIDE

PULL

PUSH

PULL

PULL

PUSH

PULL

PUSH

60 INCHES

48 INCHES

60 INCHES

54 INCHES

42 INCHES (1)

48 INCHES (2)

42 INCHES (3)

18 INCHES

0 INCHES (3)

36 INCHES

42 INCHES

22 INCHES (3 & 4)

24 INCHES

24 INCHES

(A)

HINGED

DOOR

(B) SLIDING DOOR

(C) FOLDING DOOR

(D) DOORWAYS WITHOUT DOORS

703.5.3 FINISH AND CONTRAST. PICTOGRAMS AND THEIR

FIELDS SHALL HAVE A NON GLARE FINISH. PICTOGRAMS

SHALL CONTRAST WITH THEIR FIELDS, WITH EITHER A LIGHT

PICTOGRAM ON A DARK FIELD OR A DARK PICTOGRAM ON A

LIGHT FIELD.

703.6.2 FINISH AND CONTRAST.

SYMBOLS OF ACCESSIBILITY AND

THEIR FIELDS SHALL HAVE A NON

GLARE FINISH. SYMBOLS OF

ACCESSIBILITY SHALL CONTRAST

WITH THEIR FIELDS, WITH EITHER A

LIGHT SYMBOL ON A DARK FIELD OR

DARK SYMBOL ON A LIGHT FIELD.

703.6.1 GENERAL SYMBOLS OF ACCESSIBILITY

SHALL COMPLY WITH SECTION 703.6

DATE:

DESIGNED:

TECH. REVIEW:

SUB SHEET NO.

PMIS/PKG NO.

DRAWING NO.

SHEET

TITLE OF SHEET

CADD:

OF

A1 TYP ACCESSIBLE DETAILS

194369

NEZ PERCE NATIONAL HISTORICAL PARK

M. KERR

M. KERR

193561

A1

2 ACCESSIBLE THRESHOLD

09/01/24

C:\Users\mekerr\OneDrive - DOI\___Admin items for sharing__Public\Current Projects Update\NEPE - update folder\NEPE_V16.dwg, 9/16/2024 11:50:41 AM, _AutoCAD PDF (General Documentation).pc3

DATE:

DESIGNED:

TECH. REVIEW:

SUB SHEET NO.

PMIS/PKG NO.

DRAWING NO.

SHEET

TITLE OF SHEET

CADD:

OF

A2 DEMOLITION PLANS

194369

NEZ PERCE NATIONAL HISTORICAL PARK

M. KERR

M. KERR

193561

A2

1 EXISTING DEMOLITION FLOOR PLAN

09/01/24

C:\Users\mekerr\OneDrive - DOI\___Admin items for sharing__Public\Current Projects Update\NEPE - update folder\NEPE_V16.dwg, 9/16/2024 11:50:28 AM, _AutoCAD PDF (General Documentation).pc3

AutoCAD SHX Text

(E) WOMEN'S RESTROOMWOMEN'S RESTROOM

AutoCAD SHX Text

REMOVE (E) SINKS, COUNTERTOPS, MIRRORS & ALL TOILET ROOM ACCESSORIES, TYP.

AutoCAD SHX Text

REMOVE (E) TOILET PARTITIONS AND DOORS TYP. THROUGHOUT

AutoCAD SHX Text

REMOVE WALL FINISH/FRAMING AS NEEDED TO DEMO (E) PIPING, TYP. THROUGHOUT

AutoCAD SHX Text

REMOVE (E) HAND DRYERS AND SAVE FOR RE-INSTALLATION

AutoCAD SHX Text

REMOVE HAND DRYER AND SAVE FOR RE-INSTALLATION

AutoCAD SHX Text

REMOVE ALL (E) FLOOR AND WALL TILE THROUGHOUT

AutoCAD SHX Text

REMOVE (E) TOILETS & FLUSH VALVES TYP THROUGHOUT.

AutoCAD SHX Text

REMOVE WALL FINISH/FRAMING AS NEEDED TO DEMO (E) PIPING, TYP. THROUGHOUT

AutoCAD SHX Text

HATCHED AREA NIC

AutoCAD SHX Text

REMOVE (E) TOILETS, & FLUSH VALVES TYP.

AutoCAD SHX Text DEMOLITION NOTES 1) THE CONTRACTOR SHALL VERIFY IN THE FIELD ALL THE CONTRACTOR SHALL VERIFY IN THE FIELD ALL LINES, LEVELS, DIMENSIONS, AND EXISTING CONDITIONS. THE INFORMATION ON THE DRAWINGS IS THE RESULT OF FIELD SURVEY AND IS ACCURATE TO THE BEST OF OUR KNOWLEDGE IT IS INTENDED, HOWEVER, AS A GUIDE FOR USE IN VERIFICATION ONLY. 2) ANY EXISTING EQUIPMENT IN THE AREA OF NEW ANY EXISTING EQUIPMENT IN THE AREA OF NEW CONSTRUCTION NOT SHOWN ON THE EXISTING PLANS SHALL BE DOCUMENTED AND SUBMITTED TO THE CO/COR FOR DETERMINATION OF ACTION REQUIRED. 3) WHENEVER THE REMOVAL OF EXISTING CONSTRUCTION WHENEVER THE REMOVAL OF EXISTING CONSTRUCTION REVEALS WORK THAT IS TO REMAIN, BUT CONFLICTS WITH NEW CONSTRUCTION, CONTRACTOR SHALL NOTIFY THE CO/COR FOR DIRECTION. 4) THE CONTRACTOR SHALL COORDINATE WITH THE CO/COR THE CONTRACTOR SHALL COORDINATE WITH THE CO/COR PRIOR TO REMOVAL OF ITEM/MATERIAL THAT IS TO BE PROTECTED AND MAINTAINED. 5) IF ANY ITEM/MATERIAL THAT IS SCHEDULED TO REMAIN IF ANY ITEM/MATERIAL THAT IS SCHEDULED TO REMAIN IN OPERATION IS DAMAGED BY THE CONTRACTOR, IT SHALL BE REPLACED TO ITS ORIGINAL CONDITION, SATISFACTORY TO THE CO/COR AT THE CONTRACTORS EXPENSE. 6) IF HAZARDOUS MATERIALS ARE PRESENT ON SITE THE IF HAZARDOUS MATERIALS ARE PRESENT ON SITE THE CONTRACTOR SHALL IMMEDIATELY NOTIFY THE CO/COR. ALL ABATEMENT SHALL MEET ALL APPLICABLE CODES & REGULATIONS. 7) REMOVE ALL (E) WALL BOARD AS NEEDED TO INSTALL REMOVE ALL (E) WALL BOARD AS NEEDED TO INSTALL BLOCKING, POWER OR PIPING AS REQD. 8) PATCH AND REFINISH ALL (E) SURFACES AFFECTED BY PATCH AND REFINISH ALL (E) SURFACES AFFECTED BY DEMO NEW WORK TYP. 9) PROTECT ALL ADJACENT SYSTEMS AND STRUCTURES PROTECT ALL ADJACENT SYSTEMS AND STRUCTURES WITH APPROPRIATE SHORING, AND PROTECTION.

AutoCAD SHX Text

PROTECT OR RETAIN EMERGENCY LIGHTS MAINTAIN LOCATION

AutoCAD SHX Text

PROTECT OR MAINTAIN ACC. DOOR OPENER

AutoCAD SHX Text

REMOVE (E) UTILITY SINK TO BE REPLACED WITH (N)

AutoCAD SHX Text

REMOVE (E) DOOR, FRAME HARDWARE & THRESHOLD

AutoCAD SHX Text

REMOVE (E) DOOR, FRAME HARDWARE & THRESHOLD

AutoCAD SHX Text

REMOVE (E) DOOR, FRAME HARDWARE & THRESHOLD

AutoCAD SHX Text

REMOVE ALL (E) FLOOR AND WALL TILE THROUGHOUT

AutoCAD SHX Text

(E) UTILITY CLOSETUTILITY CLOSET

AutoCAD SHX Text

HATCHED AREA NIC

AutoCAD SHX Text

PROTECT OR RETAIN EMERGENCY LIGHTS MAINTAIN LOCATION

AutoCAD SHX Text

REMOVE ALL (E) URINALS & URINAL SCREENS TYP.

AutoCAD SHX Text

REMOVE (E) HAND DRYERS AND SAVE FOR RE-INSTALLATION

AutoCAD SHX Text

REMOVE (E) SINKS, COUNTERTOPS, MIRRORS & ALL TOILET ROOM ACCESSORIES, TYP.

AutoCAD SHX Text

DOOR (E) NIC

AutoCAD SHX Text

PROTECT OR RETAIN

AutoCAD SHX Text

PROTECT OR RETAIN

AutoCAD SHX Text

PROTECT OR RETAIN

AutoCAD SHX Text

PLAN NORTH

AutoCAD SHX Text

REMOVE (E) NAPKIN/TAMPON DISPENSER

AutoCAD SHX Text

REMOVE ALL (E) FLOOR AND WALL TILE THROUGHOUT

AutoCAD SHX Text

(E) MEN'S RESTROOMMEN'S RESTROOM

REMOVE ALL (E) FLOOR AND WALL TILE THROUGHOUT

TECH. REVIEW:

SUB SHEET NO.

PMIS/PKG NO.

DRAWING NO.

SHEET

TITLE OF SHEET

CADD:

OF

A3 DEMOLITION REFLECTED

CEILING PLAN 194369

NEZ PERCE NATIONAL HISTORICAL PARK

M. KERR

M. KERR

193561

A3

1 EXISTING DEMOLITION REFLECTED CEILING PLAN

09/01/24

C:\Users\mekerr\OneDrive - DOI\___Admin items for sharing__Public\Current Projects Update\NEPE - update folder\NEPE_V16.dwg, 9/16/2024 11:50:52 AM, _AutoCAD PDF (General Documentation).pc3

AutoCAD SHX Text

REMOVE ALL (E) FLUORESCENT LIGHT FIXTURES AND RETURN TO PARK.

AutoCAD SHX Text

(E) WOMEN'S RESTROOMWOMEN'S RESTROOM

AutoCAD SHX Text

(E) MEN'S RESTROOMMEN'S RESTROOM

AutoCAD SHX Text

REMOVE WALL FINISH/FRAMING AND DEMO (E) PIPING, TYP. THROUGHOUT

AutoCAD SHX Text

REMOVE ALL (E) FLOOR AND WALL TILE THROUGHOUT TYP.

AutoCAD SHX Text

REMOVE WALL FINISH/FRAMING AND DEMO (E) PIPING, TYP. THROUGHOUT

AutoCAD SHX Text

HATCHED AREA NIC

AutoCAD SHX Text

REMOVE (E) HVAC GRILLES TYP. THROUGHOUT

AutoCAD SHX Text DEMOLITION NOTES 1) CARE SHALL BE TAKEN IN ORDER TO IDENTIFY AND CARE SHALL BE TAKEN IN ORDER TO IDENTIFY AND PROTECT ALL EXISTING MECHANICAL, ELECTRICAL, PLUMBING, STRUCTURAL EXISTING CONDITION. 2) REMOVE ALL ABANDONED M.E.P. SYSTEMS. REMOVE ALL ABANDONED M.E.P. SYSTEMS. 3) WHEN M.E.P. SYSTEMS ARE REMOVED FROM AN EXISTING WHEN M.E.P. SYSTEMS ARE REMOVED FROM AN EXISTING WALL OR CEILING WHICH IS TO REMAIN, PATCH ABANDONED OPENINGS TO MATCH EXISTING FINISH. 4) ALL EXISTING LIFE SAFETY DEVICES MUST REMAIN IN ALL EXISTING LIFE SAFETY DEVICES MUST REMAIN IN OPERATION.

AutoCAD SHX Text

REMOVE (E) DOOR, FRAME HARDWARE & THRESHOLD

AutoCAD SHX Text

REMOVE (E) DOOR, FRAME HARDWARE & THRESHOLD

AutoCAD SHX Text

REMOVE (E) DOOR, FRAME HARDWARE & THRESHOLD

AutoCAD SHX Text

REMOVE ALL (E) CEILING TILE AND GRID THROUGHOUT

AutoCAD SHX Text

(E) UTILITY CLOSETUTILITY CLOSET

AutoCAD SHX Text

HATCHED AREA NIC

AutoCAD SHX Text

REMOVE ALL (E) HVAC DIFFUSERS TYP. THROUGHOUT

AutoCAD SHX Text

REMOVE ALL (E) HVAC DIFFUSERS TYP. THROUGHOUT

AutoCAD SHX Text

REMOVE (E) HVAC GRILLES TYP. THROUGHOUT

AutoCAD SHX Text

PROTECT & MAINTAIN SPRINKLER SYSTEM THROUGHOUT TYP.

AutoCAD SHX Text

PROTECT & MAINTAIN SPRINKLER SYSTEM THROUGHOUT TYP.

AutoCAD SHX Text PROTECT & MAINTAIN MOTION DETECTOR FOR LIGHTING ADJUST LOCATION TO SO THAT IT DOES NOT INTERFERE WITH CEILING GRID.

AutoCAD SHX Text

PROTECT & MAINTAIN MOTION DETECTOR FOR LIGHTING

AutoCAD SHX Text

PROTECT & MAINTAIN FIRE ALARM SYSTEM THROUGHOUT TYP.

AutoCAD SHX Text

PROTECT & MAINTAIN FIRE ALARM SYSTEM THROUGHOUT TYP.

AutoCAD SHX Text

PLAN NORTH

AutoCAD SHX Text

PROTECT (E) SOFFIT AND THRESHOLD

PROTECT (E) SOFFIT AND THRESHOLD

30x48"

CLEAR

FLOOR

SPACE

30x48"

CLEAR

FLOOR

SPACE

30x48"

CLEAR

FLOOR

SPACE

30x48"

CLEAR

FLOOR

SPACE

30x48"

CLEAR

FLOOR

SPACE

DATE:

DESIGNED:

TECH. REVIEW:

SUB SHEET NO.

PMIS/PKG NO.

DRAWING NO.

SHEET

TITLE OF SHEET

CADD:

OF

A4 NEW FLOOR PLAN

194369

NEZ PERCE NATIONAL HISTORICAL PARK

M. KERR

M. KERR

193561

WOMEN'S RESTROOM

MEN'S RESTROOM

A4

ACCESSIBLE

UNISEX

RESTROOM

5'- 0"

5'- 0"

NEW FLOOR PLAN

1'-6"

1'-6"

5'-8" (5'-0" MIN.) 1'-6"

3'-1"

8'-0"

3'- 1"

3'-1" 1'-6"3'-1"3'-1"

EQ. EQ. EQ. EQ.

3'-0" EQ. EQ. EQ.

4'-51 2" 7'-

1"

6'-3" 2'-7"

2'-7"6'-3"

3'- 0"

1'-

2'- 0"

2'-

3'-

1"

09/02/24

3'- 3"

2'- 0"

2'-0" 3'-0"

2'-0" 3'-0"

2'- 0"

107A

A8

A8

A8

A8

A8

A8

A8

C:\Users\mekerr\OneDrive - DOI\___Admin items for sharing__Public\Current Projects Update\NEPE - update folder\NEPE_V16.dwg, 9/16/2024 11:50:44 AM, _AutoCAD PDF (General Documentation).pc3

AutoCAD SHX Text

HATCHED AREA NIC

AutoCAD SHX Text

(N) SERVICE MOP BASIN

AutoCAD SHX Text

(N) WALL MOUNTED SINK

AutoCAD SHX Text

HATCHED AREA NIC

AutoCAD SHX Text NOTES 1. CHECK (E) CONCRETE FLOORS FOR ABAAS SLOPE COMPLIANCE. CHECK (E) CONCRETE FLOORS FOR ABAAS SLOPE COMPLIANCE. GRIND AND FILL (E) FLOOR AS REQUIRED TO MEET ABAAS REQUIREMENTS THROUGHOUT, TYP 2. (N) FLOOR DRAIN TO HAVE ABAAS COMPLIANT GRATE, TYP. (N) FLOOR DRAIN TO HAVE ABAAS COMPLIANT GRATE, TYP. 3. RESINOUS FLOORING WITH 4” INTEGRAL BASE, TYP. THROUGHOUT RESINOUS FLOORING WITH 4” INTEGRAL BASE, TYP. THROUGHOUT INTEGRAL BASE, TYP. THROUGHOUT AREA OF (N) WORK. 4. INSTALL RESINOUS FLOORING PER MFR'S INSTALLATION INSTALL RESINOUS FLOORING PER MFR'S INSTALLATION INSTRUCTIONS. 5. WALL-MOUNTED STAINLESS STL 3'-0" W. MOP AND BROOM WALL-MOUNTED STAINLESS STL 3'-0" W. MOP AND BROOM HOLDER WITH UTILITY SHELF. COORDINATE LOCATION WITH PARK STAFF. 6. (N) PROVIDE (N) SIGN ON EXTERIOR OF DOOR THAT READS (N) PROVIDE (N) SIGN ON EXTERIOR OF DOOR THAT READS DIAPER CHANGING STATION INSIDE, COORDINATE LOCATION WITH PARK STAFF. 7. CONTRACTOR TO PROVIDE COLOR SAMPLES OF ALL FINISHES FOR CONTRACTOR TO PROVIDE COLOR SAMPLES OF ALL FINISHES FOR CO/COR TO SELECT FROM.

AutoCAD SHX Text

AutoCAD SHX Text A6

AutoCAD SHX Text

AutoCAD SHX Text A7

AutoCAD SHX Text

AutoCAD SHX Text A7

AutoCAD SHX Text

AutoCAD SHX Text A6

AutoCAD SHX Text

AutoCAD SHX Text A7

AutoCAD SHX Text

AutoCAD SHX Text A7

AutoCAD SHX Text

AutoCAD SHX Text A6

AutoCAD SHX Text

AutoCAD SHX Text A6

AutoCAD SHX Text

AutoCAD SHX Text A7

AutoCAD SHX Text

PLAN NORTH

AutoCAD SHX Text

3'-0" DOOR

AutoCAD SHX Text

EXISTING WALLS

AutoCAD SHX Text

5'-0" DIAM CIRCLE

AutoCAD SHX Text

UTILITY CLOSET

AutoCAD SHX Text

(E) LEAVE LEGACY TILE AND PAINT TO MATCH NEW WORK

AutoCAD SHX Text

RECESSED SHELF SEE DETAIL 1/A9

AutoCAD SHX Text

DOOR (E) NIC

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text

(N) FULL HEIGHT WALL WITH BLOCKING OVER EXISTING WALL

AutoCAD SHX Text A7

AutoCAD SHX Text

AutoCAD SHX Text

(N) COATHOOK TYP., MOUNT ON COATHOOK TYP., MOUNT ON BACK OF PARTITION(S) 62" A.F.F.

AutoCAD SHX Text

(N) COATHOOK, MOUNT ON COATHOOK, MOUNT ON WALL JUST BELOW ACCENT COURSE NO HIGHER THAN 48" A.F.F.

AutoCAD SHX Text

(N) FULL HEIGHT WALLS SEE DETAIL 9/A8

AutoCAD SHX Text

(N) URINAL SCREEN

(N) URINAL SCREEN

TECH. REVIEW:

SUB SHEET NO.

PMIS/PKG NO.

DRAWING NO.

SHEET

TITLE OF SHEET

CADD:

OF

A5 NEW REFLECTED CEILING

194369

NEZ PERCE NATIONAL HISTORICAL PARK

M. KERR

M. KERR

193561

A5

1 NEW REFLECTED CEILING PLAN

09/01/24

LIGHT SCHEDULE

TYPE DESCRIPTION FINISH NOTES

F-1 2x2 LED TROFER 40W, 4400 LUMENS | ADJ. CCT WHITE

F-2 METALLIC GRAY

F-3

ON/OFF SWITCH WITH OCCUPANCY SENSORS (KEYED SWITCHED -OVERRIDE)

WHITE

BASIS OF DESIGN MANUF & MODEL

INTERIOR LINEAR LIGHT

INTERIOR RECESSED ROUND LIGHT

INTERIOR SURFACE LIGHT PROGRESS LIGHTING 5" LED FLUSH MOUNT CT FIXTURE

LITHONIA LIGHTING 6” LED REC CT BAFFLE MODULE ON/OFF SWITCH WITH OCCUPANCY SENSORS (KEYED SWITCHED -OVERRIDE)

ON/OFF SWITCH WITH OCCUPANCY SENSORS (KEYED SWITCHED -OVERRIDE)

C:\Users\mekerr\OneDrive - DOI\___Admin items for sharing__Public\Current Projects Update\NEPE - update folder\NEPE_V16.dwg, 9/16/2024 11:51:05 AM, _AutoCAD PDF (General Documentation).pc3

AutoCAD SHX Text

WOMEN'S RESTROOM

AutoCAD SHX Text

MEN'S RESTROOM

AutoCAD SHX Text

(N) SURFACE MOUNTED LUMINAIRE SURFACE MOUNTED LUMINAIRE F-2, TYP.,

AutoCAD SHX Text

(N) 2X2 DROP IN CEILING TILE 2X2 DROP IN CEILING TILE @ 8'-2" AFF

AutoCAD SHX Text

(N) LED LIGHT LED LIGHT FIXTURE F-1, TYP.

AutoCAD SHX Text STD. 24 IN. X 24 IN. 24 IN. X 24 IN. DROP CEILING AIR VENT REGISTER, TYP., WHITE TYP., WHITE WHITE

AutoCAD SHX Text

HATCHED AREA NIC

AutoCAD SHX Text

NOTES 1. SEE SHEET A8 FOR CEILING DETAILS.SEE SHEET A8 FOR CEILING DETAILS.

AutoCAD SHX Text

(N) 2X2 DROP IN CEILING TILE @ 8'-2" AFF2X2 DROP IN CEILING TILE @ 8'-2" AFF

AutoCAD SHX Text

UTILITY CLOSET

AutoCAD SHX Text

HATCHED AREA NIC

AutoCAD SHX Text

(N) PLACE RUNNER AND CROSS TEE FRAMEWORK TO SUPPORT LIGHTS, PLACE SINGLE TILE ABOVE SINK FOR LED RECESSED, LIGHT OTHERWISE LEAVE WITHOUT PANELS

AutoCAD SHX Text

(E) FIRE SUPPRESSION SYSTEM

AutoCAD SHX Text

(N) SURFACE MOUNTED LUMINAIRE F-2, TYP.

AutoCAD SHX Text

(N) LED LIGHT FIXTURE F-1, TYP.

AutoCAD SHX Text STD. 24 IN. X 24 IN. 24 IN. X 24 IN. DROP CEILING AIR VENT REGISTER, TYP., WHITE TYP., WHITE WHITE

AutoCAD SHX Text

(N) SOFFIT @ 8'-0" AFFSOFFIT @ 8'-0" AFF

AutoCAD SHX Text

(N) SOFFIT @ 7'-0" AFFSOFFIT @ 7'-0" AFF

AutoCAD SHX Text

(N) SOFFIT @ 7'-0" AFFSOFFIT @ 7'-0" AFF

AutoCAD SHX Text

(N) 2X2 DROP IN CEILING 2X2 DROP IN CEILING TILE @ 8'-0" AFF

AutoCAD SHX Text

(E)SPRINKLER HEAD

AutoCAD SHX Text

PLAN NORTH

AutoCAD SHX Text

(N) SURFACE MOUNTED SURFACE MOUNTED LUMINAIRE, F-3, TYP.

AutoCAD SHX Text R

AutoCAD SHX Text R

AutoCAD SHX Text R

AutoCAD SHX Text R

AutoCAD SHX Text

SURFACE MOUNTED LED EXIT SIGN, RED LETTERS, UNIVERSAL MOUNT, WHITE.

AutoCAD SHX Text

SURFACE MOUNTED LED EXIT SIGN, RED LETTERS, UNIVERSAL MOUNT, WHITE.

AutoCAD SHX Text

ACCESSIBLE UNISEX RESTROOM

ACCESSIBLE UNISEX RESTROOM

TECH. REVIEW:

SUB SHEET NO.

PMIS/PKG NO.

DRAWING NO.

SHEET

TITLE OF SHEET

CADD:

OF

A6 INTERIOR ELEVATIONS

SHEET 1 OF 2

194369

NEZ PERCE NATIONAL HISTORICAL PARK

M. KERR

M. KERR

193561

SOUTH WALL WOMEN'S RESTROOM

WALL RESTROOMENTRY

A6

2 EAST WALL WOMEN'S RESTROOM

A6

A6

A6

A6

1 ACCESSIBLE UNISEX RESTROOM

EAST WALL MEN'S RESTROOM

A6

09/02/24

C:\Users\mekerr\OneDrive - DOI\___Admin items for sharing__Public\Current Projects Update\NEPE - update folder\NEPE_V16.dwg, 9/16/2024 11:51:01 AM, _AutoCAD PDF (General Documentation).pc3

AutoCAD SHX Text 5'-4"

AutoCAD SHX Text 2'-8"

AutoCAD SHX Text 1'-4"

AutoCAD SHX Text 2'-10"

AutoCAD SHX Text 1'-4 "12"

AutoCAD SHX Text 5'-4"

AutoCAD SHX Text

UNISEX

AutoCAD SHX Text

WOMEN

AutoCAD SHX Text

MEN

AutoCAD SHX Text 5'-4"

AutoCAD SHX Text 5'-4"

AutoCAD SHX Text

KEY NOTES

AutoCAD SHX Text 4"

AutoCAD SHX Text 4'-2"

AutoCAD SHX Text

NOTE: PROVIDE BLOCKING IN WALLS AT ALL WALL MOUNTED ITEMS.

AutoCAD SHX Text

RECESSED SHELF SEE DETAIL 1/A9

AutoCAD SHX Text 96'-0"

AutoCAD SHX Text 3'-1"

AutoCAD SHX Text 5'-4"

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 1 BABY CHANGING STATION 2 ACCESS PANEL 3 TILE TYPE 3 TYP. 4 TILE TYPE 4 TYP. 5 TILE TYPE 5 TYP. 6 TOILET ACCESSORY: ELEC. HAND DRYER TYP. 7 TOILET ACCESSORY: SANITARY NAPKIN DISPENSER 8 TOILET ACCESSORY: TOILET ROLL DISPENSER TYP. 9 TOILET ACCESSORY: GRAB BAR TYP. 10 TOILET ACCESSORY: SANITARY NAPKIN DISPOSAL TYP. 11 TOILET ACCESSORY: SOAP DISPENSER TYP. 12 TOILET ACCESSORY: MIRROR 13 SIGNAGE 14 TOILET ACCESSORY: SEAT COVER DISPENSER 15 TOILET PARTITION TYP. 16 WALL-MOUNT URINAL TYP. 17 WALL-MOUNT WATER CLOSET TYP. 18 MOTION SENSOR 19 PAINT TYPE 1 TYP. 20 SERVICE MOP BASIN 21. MOP BASIN FAUCET 22. WALL MOUNTED SINK 23. TOUCHLESS FAUCET 24. URINAL SCREEN 25. WASTEBASKET 26. COATHOOK TYP.

1 BABY CHANGING STATION 2 ACCESS PANEL 3 TILE TYPE 3 TYP. 4 TILE TYPE 4 TYP. 5 TILE TYPE 5 TYP. 6 TOILET ACCESSORY: ELEC. HAND DRYER TYP. 7 TOILET ACCESSORY: SANITARY NAPKIN DISPENSER 8 TOILET ACCESSORY: TOILET ROLL DISPENSER TYP. 9 TOILET ACCESSORY: GRAB BAR TYP. 10 TOILET ACCESSORY: SANITARY NAPKIN DISPOSAL TYP. 11 TOILET ACCESSORY: SOAP DISPENSER TYP. 12 TOILET ACCESSORY: MIRROR 13 SIGNAGE 14 TOILET ACCESSORY: SEAT COVER DISPENSER 15 TOILET PARTITION TYP. 16 WALL-MOUNT URINAL TYP. 17 WALL-MOUNT WATER CLOSET TYP. 18 MOTION SENSOR 19 PAINT TYPE 1 TYP. 20 SERVICE MOP BASIN 21. MOP BASIN FAUCET 22. WALL MOUNTED SINK 23. TOUCHLESS FAUCET 24. URINAL SCREEN 25. WASTEBASKET 26. COATHOOK TYP.

A7 INTERIOR ELEVATIONS

SHEET 2 OF 2

194369

NEZ PERCE NATIONAL HISTORICAL PARK

M. KERR

M. KERR

193561

1008DATE:

DESIGNED:

TECH. REVIEW:

SUB SHEET NO.

PMIS/PKG NO.

DRAWING NO.

SHEET

TITLE OF SHEET

CADD:

OF

A7

4 MEN'S RESTROOM NORTH WALL

A7

1 WOMEN'S RESTROOM NORTH WALL

A7

5 SOUTH WALL MEN'S RESTROOM

A7

3 MEN'S RESTROOM EAST WALL

A7

2 JANITOR WEST WALL

09/02/24

A7

6 WEST WALL - ENTRY AREA

A7

7 TILE DETAIL

C:\Users\mekerr\OneDrive - DOI\___Admin items for sharing__Public\Current Projects Update\NEPE - update folder\NEPE_V16.dwg, 9/16/2024 11:50:49 AM, _AutoCAD PDF (General Documentation).pc3

AutoCAD SHX Text

MODELNUMBER

AutoCAD SHX Text

TRADENAME

AutoCAD SHX Text

PRODUCT

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text 2'-10"

AutoCAD SHX Text 5'-4"

AutoCAD SHX Text

KEY NOTES

AutoCAD SHX Text

RECESSED SHELF SEE DETAIL 1/A9

AutoCAD SHX Text

NOTE: PROVIDE BLOCKING IN WALLS AT ALL WALL MOUNTED ITEMS.

AutoCAD SHX Text 72'-0"

AutoCAD SHX Text

MATCH TO EXISTING SOFFIT AND APPLY NEW PAINT ON ENTIRE AREA

AutoCAD SHX Text

ENSURE THRESHOLD MEETS ACCESSIBILITY STANDARDS.

AutoCAD SHX Text 4'-4"

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 5'-4"

AutoCAD SHX Text 4'-2"

AutoCAD SHX Text 4"

AutoCAD SHX Text

ONE ROW OF ALTERNATING TILES 45° DIAGONAL CUT FOR TILES 3 & 4

1 BABY CHANGING STATION 2 ACCESS PANEL 3 TILE TYPE 3 TYP. 4 TILE TYPE 4 TYP. 5 TILE TYPE 5 TYP. 6 TOILET ACCESSORY: ELEC. HAND DRYER TYP. 7 TOILET ACCESSORY: SANITARY NAPKIN DISPENSER 8 TOILET ACCESSORY: TOILET ROLL DISPENSER TYP. 9 TOILET ACCESSORY: GRAB BAR TYP. 10 TOILET ACCESSORY: SANITARY NAPKIN DISPOSAL TYP. 11 TOILET ACCESSORY: SOAP DISPENSER TYP. 12 TOILET ACCESSORY: MIRROR 13 SIGNAGE 14 TOILET ACCESSORY: SEAT COVER DISPENSER 15 TOILET PARTITION TYP. 16 WALL-MOUNT URINAL TYP. 17 WALL-MOUNT WATER CLOSET TYP. 18 MOTION SENSOR: DIRECT TOWARD DOORWAY, TYP. 19 PAINT TYPE 1 TYP. 20 SERVICE MOP BASIN 21. MOP BASIN FAUCET 22. WALL MOUNTED SINK 23. TOUCHLESS FAUCET 24. URINAL SCREEN 25. WASTEBASKET 26. COATHOOK TYP.

1. MULTIPLE LAYERS OF DRYWALL TO BE APPLIED

WITH STAGGERED JOINTS

2. PROVIDE WATER RESISTANT GREEN BOARD GYPSUM

BOARD AT TOILET ROOMS AND JANITOR CLOSETS

AND OTHER SIMILAR 'WET' SPACES.

3. AT PARTITIONS SCHEDULED TO RECEIVE WALL TILE

FINISH PROVIDE CEMENTITIOUS BACKER BOARD.

4. COORDINATE DIMENSIONAL LAYOUT WITH APPLIED

FINISH THICKNESS WHERE CLEAR OR MINIMUM

CLEAR DIMENSIONS ARE REQUIRED. MAINTAIN CODE

REQUIRED CLEARANCES AT ALL APPLIED FINISHES.

5. METAL STUDS SHALL BE SPACED 16" O.C.

U.O.N. OR REQUIRED TO COMPLY WITH MAX.

DEFLECTION CRITERIA PER SPECIFICATIONS.

2" MAX.

#12 GAGE HANGER WIRE,

4' EACH WAY PLUS ONE

WIRE AT EA CORNER OF

LIGHT FIXTURES

LIGHT SHALL BE ATTACHED

TO THE CEILING SYSTEM

WITH POSITIVE CLAMP

DEVICES

LIGHT FIXTURE

#12 GAGE HANGER AT

EACH CORNER

RIGID STEEL HEAVY DUTY EMT

CONDUIT STRUT. @ 12'-0" O.C. EA.

WAY. START 6'-0" MAX FROM EDGE

OF CEILING AROUND PERIMETER

WIRE LOCKING PIN TO FASTEN

CROSS RUNNER TO MAIN

4- #12 GA SEISMIC SPLAY WIRE ONE

EACH WAY IN PLANE OF OF EACH

MAIN RUNNER - VERTICAL ANGLE OF

45° - ALL WIRES SECURED TO MAIN

RUNNER WITHIN 3" OF INTERSECTION

AT EA. END OF SPLAY WIRE THRU

HOLE IN RUNNER, CONDUIT STRUT

OR THRU EYE SCREW & TWISTING

WIRE TIGHT AROUND ITSELF AT

LEAST THREE COMPLETE TURNS IN

1-1/2" TYP.

CROSS TEE

1"DIA. X 20GA EMT STEEL CONDUIT

WHER "L" IS GREATER THAN 5'-6" -

3/4" DIA. 22 GA. EMT STEEL CONDUIT

STRUT UP TO "L" OF 5'-6". SLIP OVER

#12 GA. IN PLACE VERTICAL WIRE.

CUT TO FIT AND SHIM TIGHT TO

FLOOR OR ROOF STRUCTURE AND

MAIN RUNNER

45°

MAIN TEE (HEAVY DUTY)2"MAX

WHERE "L" IS GREATER THAN 8'-6"

AND LESS THAN 17'-0" ADD (4) SPLAY

WIRES AT MID HEIGHT OF STRUT.

LATERAL FORCE BRACING

3 FULL TURNS MIN.

HEAVY DUTY SYSTEM

1.) CEILING OVER 1,000SF REQUIRE HORIZONTAL RESTRAINT SYSTEM.

2.) CEILING WITHOUT RIGID BRACING MUST HAVE 2" OVERSIZED TRIM

RINGS FOR SPRINKLERS AND OTHER PENETRATIONS.

TOTAL SUSPENDED CEILING AREA

NOTE:

< 1000SF. LATERAL RESTRAINT

SYSTEM NOT REQUIRED PER ASCE

7-05 - 13.5.6.2.2 EXCEPTION C.

SECURE ALL WIRES TO

TEES MAXIMUM 2" FROM

INTERSECTION

NO. 12 GA. VERT. WIRE

HANGER IN COMPRESSION TUBE

- LEVEL CEILING GRID PRIOR

TO SETTING CONDUIT

45°

45°

45°

2"MAX

8" MAX.

3/4" CLR.

8" MAX.

3/4" CLR.7/8" BERC

2 CLIP

PERIMETER MEMBER

AT STARTER WALLS AT OPPOSITE WALLS

7/8" BERC

2 CLIP

MINIMUM

CLEARANCE

RUNNERS AT WALLS

IF LIGHT FIXTURE IS LESS

THAN 56 LBS. & 4-#12 GA.

IF LIGHT FIXTURE EXCEEDS

APPROVED HANGERS

PROVIDE 2-#12 GA. HANGERS

56 LBS. IT SHALL BE

SUPPORTED FROM THE

STRUCTURE ABOVE BY

0'-0"

A8

4" RESINOUS FLOORING BASE

SUSPENDED CEILING

PER 5-6/A8

FULL HT. W/ 20GA. 3 5/8"

METAL STUDS @ 16" O.C.

WITH SOUND BATT

INSULATION

BLOCKING @ 8'-0" A.F.F.

8'-0"

EXISTING CONCRETE SLAB

EXISTING

STRUCTURE

ABOVE

C O

N

TR

AC

TO

R

TO

V

ER

IF

Y

EXIST.

STRUCTURE

ABOVE

A8

5/8" GWB , MUD AND PAINT

ATTACH EXIST. METAL DECK

w/ #8 METAL SCREWS FASTENERS @ 16"oc

DEFLECTION TRACK @ FULL HEIGHT

PARTITIONS - SEAL ALL VOIDS & GAPS

CEILING RUNNER 25MSG MIN. GALV.

STL. w/ 3" OR 4" LEGS OFFSET @

MIDPOINT 5/8"

METAL STUDS @ 16"oc 20 GA. -

TO UNDERSIDE OF STRUCTURE

ACOUSTIC INSULATION (PROVIDE

ACOUSTIC SEALANT @ TOP TRACK -

BOTH SIDES)

GYPSUM WALL BOARD TYP.

READY FOR PAINT

ACOUSTIC INSULATION (PROVIDE

ACOUSTIC SEALANT @ BOTTOM

4" RESINOUS FLOORING - TYP.

SEALANT - ALL VOIDS

FIRE SEAL, TYP.

3/ 4"

G

AP 1

1/

4" M

IN

O

VE

R

LA

P

3/ 4"

EXIST. MTL. DECK

ATTACH w/ 1" RAMSET 1508

POWER ACTUATED FASTENERS

@ 16"oc @ CONCRETE

EXIST. CONCRETE

SUBFLOOR

MTL. STUD BASE TRACK, TYP.

5/8" G.W.B. EA. SIDE,

ALTERNATE TAPE & MUD

CEILING RUNNER 25MSG MIN. GALV.

STL. W/ 3" OR 4" LEGS OFFSET @

MIDPOINT 5/8"

2X4 STUDS @ 16" O.C.

TO UNDERSIDE OF STRUCTURE

ACOUSTIC INSULATION (PROVIDE

ACOUSTIC SEALANT @ TOP TRACK -

BOTH SIDES)

5/8" GYPSUM WALL BOARD TYP.

READY FOR PAINT

ACOUSTIC INSULATION (PROVIDE

ACOUSTIC SEALANT @ BOTTOM

4" RESINOUS FLOORING - TYP.

SEALANT TYP.

3/ 4"

G

AP

1/

4" M

IN

O

VE

R

LA

P

3/ 4"

GWB

CEILING LINE +8'-0"

20 GA METAL DEFLECTION TRACK

@ FULL HEIGHT PARTITIONS - SEAL

ALL VOIDS & GAPS

ATTACH TO JOISTS W/ (2) #8

SCREW FASTENERS @ 16"OC

0'-0"

2x12 JOISTS

ATTACH METAL TRACK TO

CONCRETE FLOOR WITH

0.145 DIA. HILTI POWER

ACTUATED ANCHORS @ MIN.

2'-0" O.C. (ICBO ER-2388)

DATE:

DESIGNED:

TECH. REVIEW:

SUB SHEET NO.

PMIS/PKG NO.

DRAWING NO.

SHEET

TITLE OF SHEET

CADD:

OF

A8

WALL AND CEILING DETAILS

194369

NEZ PERCE NATIONAL HISTORICAL PARK

M. KERR

M. KERR

193561

A8

3 TYPICAL WALL BLOCKING

A8

4 TOILET PARTITION AT WALL

A8

1 ACCESSIBLE SINK SECT

M. KERR

A8

2 WALL DETAIL

A8

7 SOFFIT @ TRANSITION

A8

6 TYPICAL CEILING BRACING DETAIL

A8

5 LIGHT FIXTURE BRACING DETAIL

A8

10 TYPICAL WALL HEAD DEFLECTION

A8

A8

8 TYPICAL WALL AT SOFFIT

SCALE: 1 12"= 1'-0"SCALE: 1 12"= 1'-0"

TYPICAL FULL HEIGHT WALL

09/02/24

C:\Users\mekerr\OneDrive - DOI\___Admin items for sharing__Public\Current Projects Update\NEPE - update folder\NEPE_V16.dwg, 9/16/2024 11:50:56 AM, _AutoCAD PDF (General Documentation).pc3

AutoCAD SHX Text

SHEET NOTES

AutoCAD SHX Text 2'-10"

AutoCAD SHX Text

INSULATE EXPOSED PIPES

AutoCAD SHX Text 2'-3"

AutoCAD SHX Text 9"

AutoCAD SHX Text 8"

AutoCAD SHX Text 11"

AutoCAD SHX Text

17" MIN

AutoCAD SHX Text

WALL-MOUNTED SINK, SEE

AutoCAD SHX Text

FIXTURE SCHEDULE

AutoCAD SHX Text

REQUIRED KNEE

AutoCAD SHX Text

CLEARANCE AT ACCESSIBLE

AutoCAD SHX Text

SINK

AutoCAD SHX Text

40" MAX A.F.F.

AutoCAD SHX Text

40" MAX A.F.F.

AutoCAD SHX Text

TO REFLECTIVE SURFACE OF MIRROR

AutoCAD SHX Text

TILT-MIRROR, SEE

AutoCAD SHX Text

ACCESSORIES SCHEDULE

AutoCAD SHX Text

BLOCKING TYP.

AutoCAD SHX Text

WALL-MOUNTED SINK CARRIER

AutoCAD SHX Text

(E) 2X12 ROOF RAFTER, WHERE OCCURS

AutoCAD SHX Text

(N) 5/8" GYP. BD. CLG.

AutoCAD SHX Text

(E) 2X4 CEILING JOISTS @ 16" O.C., FILL W/ (N) MIN. R-11 BATT INSUL.

AutoCAD SHX Text

(N) 1/4" SEALANT OVER BACKER ROD, TYP.

AutoCAD SHX Text

(E) WALL

AutoCAD SHX Text

(N) INTER. FINISH, SEE INTER. ELEVS.

AutoCAD SHX Text

WALL ASSEMBLY AS SCHEDULED

AutoCAD SHX Text

A34 CLIP EACH END, TOP AND BOTTOM

AutoCAD SHX Text

* 4X BLOCKING TO MATCH STUD FRAMING WIDTH

AutoCAD SHX Text

* PROVIDE 4X BLOCKING AT ALL WALL MOUNTED

AutoCAD SHX Text

ITEMS WEIGHING MORE THAN 50 LBS

AutoCAD SHX Text

(2) #6 X 3" SCREW TO 4X4 BLOCKING,

AutoCAD SHX Text

TYP EACH LOCATION

AutoCAD SHX Text

ANGLE BRACKET

AutoCAD SHX Text

PARTITION PANEL

AutoCAD SHX Text

BLOCKING AS REQUIRED

AutoCAD SHX Text

#12 X 2 1/2" SMS

AutoCAD SHX Text

WALL PARTITION PER DETAIL

AutoCAD SHX Text

5/8" GYP. BOARD

AutoCAD SHX Text

3 5/8" METAL STUDS @ 16" O.C. (MAX.)

AutoCAD SHX Text

3" SOUND ATTENUATION BLANKETS

AutoCAD SHX Text

ACOUSTICAL SEALANT AT TOP & BOTT. OF WALL

TO U.S.D. STC 49

A9 SCHEDULES

194369

NEZ PERCE NATIONAL HISTORICAL PARK

M. KERR

M. KERR

193561

1010DATE:

DESIGNED:

TECH. REVIEW:

SUB SHEET NO.

PMIS/PKG NO.

DRAWING NO.

SHEET

TITLE OF SHEET

CADD:

OF09/02/24

PT-1 PAINT MATCH EXISTING

T-3

T-4 TILE DALTILE

MATERIAL BASIS OF DESIGN

MANUFACTURER MODEL / STYLE COLOR/FINISH SIZE REMARKS

INTERIOR FINISH SCHEDULE

ROOM FINISH SCHEDULE

ROOM NO. ROOM NAME FLOOR FINISH REMARKS

110 ALCOVE EPOXY

109 ACCESSIBLE

UNISEX

RESTROOM

EPOXY

DOOR SCHEDULE

DOOR ROOM

NAME (E)/(N)

TYP

E

OPENING DOOR FRAME HW

GROUP RATING REMARKWIDTH HEIGHT THICK MAT FINISH MAT PUSH PULL

A UNISEX (N) A 3' - 0" 7' - 0" 1 3/8" WD PT-1 MTL PT-1 PT-1 01 NR

B JANITOR (N) A 3' - 0" 7' - 0" 1 3/8" WD PT-1 MTL PT-1 PT-1 01 NR

BABY CHANGING TABLE KOALA KARE KB300-01SS GRAY

ELECTRIC HAND DRYER EXCEL XLERATOR XL-BLW BRUSHED NICKEL

SANITARY NAPKIN DISPOSAL BOBRICK B-270 SATIN FINISH STAINLESS STEEL

TILT MIRRORS BOBRICK B-293 2436 SATIN FINISH STAINLESS STEEL 24 X 36 IN

CLOTHES HOOK BOBRICK B-7672 SATIN FINISH STAINLESS STEEL INSTALL ON TOILET PARTITION...

SOAP DISPENSER BOBRICK B-818615 SATIN FINISH STAINLESS STEEL

GRAB BARS BOBRICK B-6806 SATIN FINISH STAINLESS STEEL

TOILET PAPER DISPENSER BOBRICK B-4288 CONTURA SERIES SATIN FINISH STAINLESS STEEL

TOILET PARTITION BOBRICK DURA LINE 1082.67 OVERHEAD-BRACED SAND 414-SEI SOLID PHENOLIC LAMINATE PANELS

W/ INSTITUTIONAL HARDWARE

TOILET FLUSHOMETER SLOAN REGAL 111XL 1.6 GAL

FLOOR-MTD TOILET AMERICAN STD WALL-HUNG AFWALL MILLENNIUM 1.1-1.6 GPF 16.5 IN

HIGH ELONGATED TOP SPUD FLUSHOMETER WHITE

SINK FAUCET CENTRAL BRASS 0355 POLISHED CHROME

WALL-MTD SINK TRUEFORM 72" ADA FLOATING CONCRETE RAMP SINK STORM 2 WIDESPREAD FAUCET HOLES

ITEM BASIS OF DESIGN

MANUFACTURER MODEL / STYLE COLOR/FINISH REMARKS

FIXTURES & ACCESSORIES SCHEDULE

WALL-MTD SINK AMERICAN STD LUCERNE 0356.041 WHITE SINGLE HOLE

AMERICAN STD NEXTGEN SELECTRONIC® TOUCHLESS FAUCET,

BASE MODEL, 0.5 GPM/1.9 LPM BRUSHED NICKELSINK FAUCET

POWER KITS MUST BE PURCHASED

SEPARATELY.

REUSE EXISTING

MIRRORS 3 X 6 FT

108 WOMAN'S EPOXY

107 MEN'S EPOXY

107A UTILITY CLOSET EPOXY

WALL PAINT

PT-1

PT-1

PT-1

PT-1

PT-1

TILE FINISH

T-4,3,5

T-4,3,5 T-4,3,5

FLOOR EPOXY

FARRIER BLUE ROAN -FA59 5 X 5 X 5/16IN

CUSTOM BUILDING PRODUCTS

T-5 DALTILE

TILE

TILE GROUT

TILE

DALTILE 5 X 5 X 5/16IN

5 X 5 X 5/16IN

GRULLO -FA60

PALOMINO -FA58

FARRIER

FARRIER

643 WARM GRAYSEE SPECS COORDINATE FINAL COLOR

WITH OWNER

EVERLAST EPOXY SYSTEMS ECO-FRIENDLY FLOOR LIGHT TEAL

A10

1 SHELF DETAIL

URINAL AMERICAN STD WALL HUNG FLOWISE WASHOUT TOP SPUD URINAL WHITE

C:\Users\mekerr\OneDrive - DOI\___Admin items for sharing__Public\Current Projects Update\NEPE - update folder\NEPE_V16.dwg, 9/16/2024 11:50:37 AM, _AutoCAD PDF (General Documentation).pc3

AutoCAD SHX Text 1'-4"

AutoCAD SHX Text 3'-10"

AutoCAD SHX Text 2'-7"

AutoCAD SHX Text 2'-9"

AutoCAD SHX Text

2" CONCRETE COUNTERTOP MATCH COLOR TO RAMP SINK

AutoCAD SHX Text SOFFIT 20GA.3 5/8" METAL STUD 20GA.3 5/8" METAL STUD BLOCKING AS REQUIRED COVERED IN 5/8" GWB. COVERED IN 5/8" GWB. 5/8" GWB.

AutoCAD SHX Text

20GA. 3 5/8" METAL STUD BLOCKING AS REQUIRED COVERED IN 5/8" GWB. 5/8" GWB.

AutoCAD SHX Text

MATCH ADJACENT FINISHES

ASSEMBLY(S) SHALL TIE INTO WALL BLOCKING