A06_0044020234_GRSA_LE_Equip_Install__SOW.pdf

1 | 4

National Park Service

Great Sand Dunes National Park and

Preserve

Patrol Vehicle Commissioning

The National Park Service, Great Sand Dunes National Park and Preserve (GRSA) requires one new vehicle to be commissioned for FY2025.

A Scope of Work (SOW) has been drafted for the vehicle in the project. Please refer to the

SOWs for further project requirements and specifications.

1. 2024 Ford , Special Service Package (4x4) Marked Patrol Vehicle.

2 | 4

LOCATION OF WORK:

Work will be completed at the contractor’s location of choice as long as the location and vehicle can be secured while the work is being accomplished. Location of work shall be no longer than a 600 mile / 10 hour driving time from Mosca, CO. A commissioned NPS Ranger will deliver and pick up the vehicle from the contractor’s location.

SUMMARY OF WORK:

The end result of this contract is for the government to have a fully functioning commissioned patrol vehicle. Contractor shall either re-use equipment provided by the NPS, or purchase and install new equipment. Equipment will be tested to ensure proper workmanship before delivery of vehicle to NPS. Contractor shall review and demonstrate full functionality of all equipment upon pickup of vehicle.

Vehicle

2024 Ford F-150 SSV-Marked, Color-White

LOCATION OF WORK:

Work will be completed at the contractor’s location of choice as long as the location and vehicle can be secured while the work is being accomplished. A commissioned NPS Ranger will deliver and pick up the vehicle from the contractor’s location.

SUMMARY OF WORK:

The end result of this contract is for the government to have a fully functioning commissioned patrol vehicle.

DESCRIPTION OF WORK:

The contractor shall install the following items provided by the National Park Service.

• APX4500 DTR 7/800MHz

• APX4500 VHF

• Headliner Radio Speakers

• Stalker RADAR and antennas/wiring

3 | 4

The contractor shall install the following items.

1 FEDERAL SIGNAL 51 INCH INTEGRITY RED/BLUE/WHITE LIGHT BAR Part #: INTG51J-

PF3L

2 Federal Signal FSJoin™ CN SignalMaster™ Rear Directional Warning - Red/Blue/ Amber Part #:

CNSMJ8R-P3C

3 Federal Signal Pathfnder® Siren/Light Controller - Remote Surface-Mount Controller w/ 9 Buttons &

Slide Switch Part #: PF200R

4 Federal Signal OBD/Vehicle CAN Interface for Pathfnder® Controllers - 25 Foot Cable Part #:

OBDCABLE25-1

5 Federal Signal 24-Channel Potted Expansion Module for Pathfnder® Controllers Part #: EXPMOD24

6 Federal Signal Rear Expansion Module for Pathfnder® Controllers Part #: EXPMOD-2

7 Federal Signal DynaMax® 100W Siren Speaker Part #: ES100C

8 FEDERAL SIGNAL 100W SPEAKER BRACKET (ONLY WORKS WITH F-150 RESPONDER )

Part #: ESB-FRD15

9 Federal Signal Rumbler® Low-Frequency Siren Speaker - Compact Part #: RBKIT1-COMPACT

10 FEDERAL SIGNAL RUMBLER BRACKET Part #: RBC2-FRD15ND 1

11 SoundOff Signal Select-A-Pattern Solid State Headlight Flasher w/ Electrical Isolation Part #:

ETHFSS-SP-ISO

12 2021+ Ford F150 Police Responder/Ecoboost Trim Level Rear Wiring Harness Part #: 911006

13 Sylvania ZEVO LED Taillight Upgrade Part #: WATTS_ZEVO_TRUCK

14 SoundOff Signal mpower® 4" Fascia Light w/ Stud Mount, Red/Blue/White (4 GRILL) (4

FENDERS) (2 SIDE WINDOWS) Part #: EMPS2STS5RBW (x10)

15 mpower® 3" Fascia Light w/ Quick Mount - Black Housing, Tricolor - Red/Blue/ White (4

MIRROR) Part #: EMPS1QMS4RBW (x4)

16 SoundOff Signal Under Mirror Bracket Kit for 2021+ F-150 (Full Install Requires 4 3" Quick-Mount mPower Lightheads) Part #: PMP1BKUMB6 (x2)

17 SoundOff Signal 90 Degree Adjustable Deck/Grille Bracket for mpower® 4" Stud Mount Lightheads

(BRACKET FOR GRILL X4) (BRACKET FOR SIDE WINDOWS x2) Part #: PMP2BKDGAJ

4 | 4

18 Quake LED 32 inch 150 Watt Monolith Strobe LED Light Bar (Red/Blue/White) Part #: QMS1440

19 Quake LED 48" Strip w/ Metal Channel Part #: QDLSL1452

20 SoundOff Signal XF Flush Mount Light Dual Color Blue/White (1 SIDE FRONT BUMPER) (1

SIDE REAR BUMPER) Part #: EXFS10002-E (x2)

21 SoundOff Signal XF Flush Mount Light Dual Color Red/White (1 SIDE FRONT BUMPER) (1 SIDE

REAR BUMPER) Part #: EXFS10002-D (x2)

22 Whelen 6” Round Extreme Low Profle Surface Mount Light w/ Switch - White/ Red Part #:

60CREGCS

23 Motorola 146-174MHz VHF Mobile Antenna Part #: HAD4017A

24 Motorola 3dB Gain Colinear Antenna 762-870MHz Part #: HAF4017A

25 Headliner Radio Speaker Part #: MA3013LGS (x2)

26 Magnetic Microphone Hangup Part #: MMSU-1 (x3)

27 Single Cell Lite Prisoner Transport System for Ford F-150 SSV/Police Responder (2021+) Part #:

475-1812

28 Flush Mount 11MM Dual Color Red/White LED Bolt for Interior Lighting (3 Watt) Part #:

29 Jotto GL3XL Handcuff Gun Lock Mounting Plate Part #: 475-7283 (x2)

30 Jotto Gun Lock Butt Plate Assembly - Driver Side Part #: 475-1214

31 Jotto Gun Lock Butt Plate Assembly - Passenger Side Part #: 475-1211

32 Jotto T-Slot Retainer for Single Cell Partition Part #: 475-8170 (x4)

33 Jotto Hardware for Gun Lock Assemblies Part #: 023-0115 (x4)

34 Santa Cruz Generation 2 Universal Gun Lock w/ Handcuff Key Override Part #: SC-6#H (x2)

35 2021-2024 Ford F150 FULL SIZE Console with Locking Arm Rest Lid. Includes USB/USB-c extension plug Part #: PP-2021-F150-FS

36 JOTTO DESK MAMBA MOUNT Part #: 425-0150/4138

37 Jotto Faceplate for Federal Signal Pathfnder PF200R; Pathway PF100R Remote Head Part #: 425-

38 Jotto Faceplate for Motorola O5 Remote Head (APX7500, APX6500, APX4500, XTL5000) Part #:

425-6295 $49.94 2 $99.88

5 | 4

39 Jotto Faceplate w/ 12V Power Points (x2), USB-A, & USB-C Charging Outlets Part #: 425-6701

40 Copeland 160 Amp Time Delay Relay w/ Over/Under Voltage Protection Part #: 7601

41 PDM - 14 Circuit + Ground, 175 A, 12 V W/Kill Switch Part #: 2601B

42 CT Series Fuse Block ATO/JCase 8+2 Part #: 5015B

43 16MM Latching Pushbutton Switch w/ Red Illumination Part #: GQ16F-11EZ

44 Unity X-LED 6" Spotlight Black Part #: X221016-0002

45 Unity Spotlight Installation Kit 9078 Part #: 9078

46 STREAM LIGHT IN CAR RECHARGABLE

47 Stalker Rear Antenna Mount 2020+ Ford F-150 Part #: 200-1342-00

48 Stalker Radar Front Combo Mount 2021+ Ford F-150 Part #: 200-1341-10

The contractor shall install the following items provided by the National Park Service.

• Vehicle graphics package.

a. Shall include striping, and assorted stickers and lettering to be placed in accordance with instructions provided.

b. Any factory lettering shall be removed to accommodate NPS graphics.

c. Any deviation required to fit graphics onto vehicle shall be done in consultation with NPS representative.

Programing Notes for lights and accessories. If any questions exist, please reference your

Ranger point of contact.

• Programing Notes for police lights

-All lights shall be programmed through the Siren Controller with directional controls to the industry standard. Light position 1-All rear facing lights flash.

Position 2- All rear and forward facing lights flash-NO wigwag or takedowns.

Position 3- All lights active, no takedowns flashing.

6 | 4

• Programing Notes for accessories

a. The Siren Controller should function as switch for all accessories.

WARRANTY:

Contractor shall provide a one year warranty on all labor. If installed equipment malfunctions within a year of completion the contractor shall in a timely manner access the malfunction to determine if there was faulty labor or equipment. If labor is found to be at fault the contractor shall fix or replace the equipment at no cost to the government. If the equipment is found to be at fault the contractor shall supply a quote to obtain and replace the faulty equipment and replace under factory warranty if applicable. The government reserves the right to obtain a second opinion.

Contractor shall provide a one year warranty on all labor. If installed equipment malfunctions within a year of completion the contractor shall in a timely manner access the malfunction to determine if there was faulty labor or equipment. If labor is found to be at fault the contractor shall fix or replace the equipment at no cost to the government. If the equipment is found to be at fault the contractor shall supply a quote to obtain and replace the faulty equipment and replaced under factory warranty if applicable. The government reserves the right to obtain a second opinion.

VERIFICATION:

Contractor must verify all quantities, dimensions, capabilities, and compatibilities affecting the work of this contract before ordering products. The contractor must test dimensions, capabilities, and compatibilities for provided equipment the government wishes recycled such as light bars, passenger cages, etc. If an item cannot be reused the contractor shall contact their

Point of Contact and request permission before purchasing the replacement or amending.

End of statement of work

7 | 4

8 | 4