A04_Spec_Sheets.pdf

PDF 2 MB Posted

Attached to
GATE-TROUBLESHOOT & REPAIR HVAC-BLDG 65
Solicitation number
140P4525Q0047
Issued by

About this file

These specification sheets detail Mitsubishi Electric CITY MULTI VRF (Variable Refrigerant Flow) heat pump system components for a maintenance facilities relocation project at Sandy Hook, with Contract # 106806-S-007 under Prime Contract P17PC00406. The documentation covers multiple system components including:

The primary outdoor unit is a 16-ton PURY-P192TSLMU-A (-BS) heat pump system consisting of two PURY-P96TLMU-A (-BS) modules and a CMY-ER200CBK twinning kit. The system uses R410A refrigerant and operates across a temperature range of -13°F to 126°F, with a nominal cooling capacity of 192,000 BTU/h and heating capacity of 215,000 BTU/h. Electrical requirements are 208/230V, 3-phase, 60Hz, with additional components including a main BC controller (CMB-P1013NU-GA1) and a sub BC controller (CMB-P108NU-GB1) to manage refrigerant piping and indoor unit connections.

View the file

Other files

File Type Posted
Sol_140P4525Q0047_Amd_0001.pdf PDF
Sol_140P4525Q0047.pdf PDF
A06_Pages_from_SAHO_Construction_Drawings.pdf PDF
B03_NJ20250037.pdf PDF
B08_References_Worksheet_(1)_(1).pdf PDF
A04_2025-03_SOW_Heat_pump_TS_and_Repair.docx DOCX document
A06_Photos_of_HVAC_systems_at_B65.docx DOCX document
B08_Price_Schedule_GATE_Troubleshoot_B65.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Specifications are subject to change without notice. © 2016 Mitsubishi Electric US, Inc.

Job Name:

System Reference: Date:

Specifications System Module 1 Module 2 Unit Type PURY-P192TSLMU-A (-BS) PURY-P96TLMU-A (-BS) PURY-P96TLMU-A (-BS)

Nominal Cooling Capacity (208/230V) Btu/h 192,000 96,000 96,000

Nominal Heating Capacity (208/230V) Btu/h 215,000 108,000 108,000

Operating Temperature Range *1

Cooling (Outdoor) *2 Refer to Module Data 23~126° F (-5~52° C) DB Heating (Outdoor) -13~60° F (-25~15.5° C) WB

External Dimensions (H x W x D) In. (mm) Refer to Module Data 64-31/32 x 48-1/16 x 29-5/32

(1,650 x 1,220 x 740) 64-31/32 x 48-1/16 x 29-5/32

(1,650 x 1,220 x 740) Net Weight Lbs. (kg) 1,006 (456) 503 (228) 503 (228) External Finish Refer to Module Data Pre-coated galvanized steel sheet Electrical Power Requirements Voltage, Phase, Hertz Refer to Module Data** 208 / 230V, 3-Phase, 60Hz

Minimum Circuit Ampacity (MCA) A Refer to Module Data** 33 / 30 33 / 30

Maximum Overcurrent Protection (MOP) A Refer to Module Data** 50 / 50 50 / 50

Piping Diameter (Brazed) From From Twinning Kit to BC Controller (In. / mm)

Liquid (High Pressure) 7/8 (22.2) Refer to System Data

Gas (Low Pressure) 1-1/8 (28.58) Max. Total Refrigerant Line Length Ft. 2,461

Refer to System DataMax. Refrigerant Line Length (Between ODU & IDU) Ft. 541

Max. Control Wiring Length Ft. 1,640

Indoor Unit Total Capacity 50~150% of ODUs Refer to System Data Model / Quantity P06~P96/1~48 Refer to System Data

Sound Pressure Level dB(A) 61.0 Refer to System Data Fan Type x Quantity Refer to Module Data Propeller fan x 1 Propeller fan x 1 Airflow Rate CFM 6,550 6,550 External Static Pressure In. WG Refer to Module Data Selectable; 0, 0.12 or 0.24”WG; factory set to 0”W.G.

Compressor Operating Range 6% to 100% Refer to System Data

Compressor Type x Quantity Refer to Module Data Inverter-driven Scroll Hermetic x 1

Inverter-driven Scroll Hermetic x 1

Refrigerant Refer to Module Data R410A; 17 lbs. + 10 oz. (8.0 kg) R410A; 17 lbs. + 10 oz. (8.0 kg)

Protection Devices

High Pressure

Refer to Module Data

High pressure sensor, High pressure switch at

4.15 MPa (601 psi)

High pressure sensor, High pressure switch at

4.15 MPa (601 psi)

Inverter Circuit (Comp. / Fan) Over-current protection Over-current protection

Fan Motor Thermal switch Thermal switch

AHRI Ratings (Ducted/Non-Ducted)

EER 11.4 / 12.1

Refer to System Data

IEER 23.5 / 23.9

COP 3.53 / 3.59

SCHE 23.0 / 28.0

Outdoor Unit: 16-TON PURY-P192TSLMU-A (-BS) (Consists of Two PURY-P96TLMU-A (-BS) and One CMY-ER200CBK Twinning Kit)

UNIT OPTION

□ Standard Model…...…...…………......………PURY-P192TSLMU-A

□ Seacoast (BS) Model…….....……......….PURY-P192TSLMU-A-BS

ACCESSORIES

□ Twinning Kit (required)..............................................…CMY-ER200CBK

□ Joint Kit.............................…for details see Pipe Accessories Submittal

□ BC Controller (required)…..............for details see BC Controller Submittals

□ Low Ambient Kit ...............…..for details see Low Ambient Kit Submittal

□ Snow/Hail Guards Kit......…for details see Snow/Hail Guards Kit Submittal

□ Base Pan Heater Kit.............for details see Base Pan Heater Kit Submittal

OUTDOOR VRF HEAT PUMP WITH

HEAT RECOVERY SYSTEM

NOTES:

*1. When applying product below -4° F, consult your design engineer for cold climate application best practices, including the use of a backup source for heating.

*2. For details on extended cooling operation range down to -10° F DB, see Low Ambient Kit Submittal.

** Each individual module requires a separate electrical connection.

Refer to electrical data for each individual module.

B65 0057 Relocate Maintenance Facilities, Sandy Hook Contract# 106806-S-007 (Prime Contract P17PC00406)

Specifications are subject to change without notice. © 2016 Mitsubishi Electric US, Inc.

Outdoor Unit: PURY-P192TSLMU-A (-BS) – DIMENSIONS

NOTES:

SEACOAST PROTECTION

• Anti-corrosion Protection: A coating treatment is applied to condenser coil for protection from air contaminants.

• Standard: Salt Spray Test Method - no unusual rust development to 480 hours.

• Sea Coast (BS): Salt Spray Test Method (JRA 9002) - no unusual rust development to 960 hours.

Fr on t v ie w

Le ft vi ew

O ut do or u ni t 2 O ut do or u ni t 1

To B

C c on tro lle r

To B

C c on tro lle r a b e f c d

Tw in ni ng p ip e( H ig h pr es su re

<o pt io na l p ar ts

Tw in ni ng p ip e( Lo w p re ss ur e)

<o pt io na l p ar ts

In ta ke ai r In ta ke ai r

D is ch ar ge a ir

In ta ke ai r

Lo w pr es su re

U ni t m od el C om po ne nt un it m od el c e d f

Hi gh p re ss ur e

O ut do or u ni t Tw in ni ng K it Lo w pr es su re

Tw in ni ng p ip e co nn ec tio n si ze

O ut do or u ni t 1 C om po ne nt u ni t n am e

P ac ka ge u ni t n am e

BC

c on tro lle r~

Tw in ni ng p ip e a b

Hi gh p re ss ur e O ut do or T w in ni ng

K it( op tio na l p ar ts

C

M Y-

E R

0C

B K

O ut do or u ni t 2 ø2 8.

(1

-1 /8 ø2

2.

2(

7/ 8)

N ot e 1.

C on ne ct th e pi pe s as s ho w n in th e fig ur e ab ov e.

R ef er to th e ta bl e ab ov e fo r t he p ip e si ze

.T w in ni ng p ip e

(H ig h pr es su re ) s ho ul d no t b e til te d m or e th an de gr ee s fro m th e ho riz on ta l p la ne

B e su re to s ee th e In st al la tio n M an ua l f or d et ai ls o f T w in ni ng p ip e in st al la tio n.

.T he p ip e se ct io n be fo re th e Tw in ni ng p ip e

(s ec tio n

"a " i n th e fig ur e) m us t h av e at le as t 5 m m

(1 9-

/1

6) o f s tra ig ht s ec tio n in cl ud in g th e st ra ig ht p ip e th at is s up pl ie d w ith th e Tw in ni ng p ip e)

.O nl y us e th e

Tw in ni ng p ip e by

M its ub is hi (o pt io na l p ar ts

.C on ne ct th e ou td oo r u ni t 1 w ith th e Tw in ni ng p ip e

(L ow p re ss ur

e) (s ec tio n "d

" i n th e fig ur e)

PU

RY

-P

2T

SL

M U-

A( -B

S)

PU

RY

-P

TL

M U-

A( -B

S)

PU

RY

-P

TL

M U-

A( -B

S) ø1 9.

(3

/4

P

P

(N ot e 5) ø1

9.

(3 /4

P ø2 2.

2( 7/

8)

(1

-3 /1

6)

(4

8- 1/

(4 8-

1/

1650(65)

0(

-3

/1 6)

PURY-P192TSLMU-A(-BS)

Unit: mm (in.)

B65 0057 Relocate Maintenance Facilities, Sandy Hook Contract# 106806-S-007 (Prime Contract P17PC00406)

Specifications are subject to change without notice. © 2016 Mitsubishi Electric US, Inc.

Modules 1 and 2: PURY-P96TLMU-A (-BS) – DIMENSIONS

NOTES:

SEACOAST PROTECTION

• Anti-corrosion Protection: A coating treatment is applied to condenser coil for protection from air contaminants.

• Standard: Salt Spray Test Method - no unusual rust development to 480 hours.

• Sea Coast (BS): Salt Spray Test Method (JRA 9002) - no unusual rust development to 960 hours.

Le ft si de v ie w

B ot to m v ie w

Fr on t v ie w

To p vi ew

(1-3/16) (1-3/16) (Mounting pitch)

(26-3/4~26-15/16)

(26-13/16)

(M ou nt in g pi tc h)

(2 -1

/4

(2 -1

/4

(1 3/

(1 3/

<S no w h oo d at ta ch m en t h ol e >

4× 5-ø4 .6

(3 /1

6) H ol e

(M ak e ho le a t t he p la st ic fa n gu ar d fo r s no w h oo d at ta ch m en t )

In ta ke ai r

D is ch ar ge a ir

C on tro l b ox

In ta ke ai r

S er vi ce pa ne l

In ta ke ai r

<S lin g ho le

2× 2-

(9

/1 6)

×2 0(

/1

6) O va l h ol e

2× 2-

(3

-3 /1

6) ×3

5( 1-

7/

) O va l h ol e

R ef rig er an t s er vi ce v al ve

<H ig h pr es su re

R ef rig er an t s er vi ce v al ve

<L ow p re ss ur e>

Fr on t v ie w S er vi ce v al ve

B ot to m v ie w S er vi ce v al ve

A

(10-3/8)

(9 -5

/8

(5 -9

/1 6)

(5-3/4)

A

(1 3/

(2-13/16)=(5-15/16)×4

(5-15/16)

(23-5/8) (8-9/16)

(3-9/16)(3-1/16)

(9 -1

5/

(1

0- 3/

4)

(11-15/16)

(1 3/

(740)(29-3/16)

(3 -3

/1 6)

(3 -3

/1 6)

(4-13/16)

(7-3/4)

(3-5/16) (3-3/4)

(1 0-

3/ 4)

(8 -1

5/

(9 -5

/1 6)

(5-3/4)

(5 -1

5/

.A t b ra zi ng o f p ip es ,w ra p th e re fri ge ra nt s er vi ce v al ve w ith w et c lo th a nd k ee p th e te m pe ra tu re o f re fri ge ra nt s er vi ce v al ve u nd er

°C (2

F)

(3 -1

/1 6)

(5 -9

/1 6)

(3 -3

/4

(5 -1

5/

(2 -1

/2

(2 -9

/1 6)

(1 -3

/8

(1 -1

3/

P ip e

(ID

ø2

8.

(1 -1

/8

O D ø2 2.

2( 7/

8) pc

E lb ow

(ID

ø2

8.

(1 -1

/8

O D ø2 8.

(1

-1 /8

● 1 pc

<A cc es so rie s>

●C on ne ct in g pi pe

Lo w p re ss ur e>

<H ig h pr es su re

P ip e

(ID

ø2

5.

4(

1) ×I

D ø1

9.

(3 /4

● 1 pc

P ip e

(ID

ø2 5.

4( 1)

×O D ø1 9.

(3

/4 pc

*1 U se th e in cl ud ed c on ne ct in g pi pe a nd c on ne ct to th e re fri ge ra nt s er vi ce va lv e pi pi ng

C on ne ct in g pi pe s pe ci fic at io ns

H ig h pr es su re ø2

5.

Lo w pr es su re

S er vi ce v al ve R ef rig er an t p ip e

D ia m et er

*1

H ig h pr es su re Lo w pr es su re

M od el

PU

R

Y- P9

6T

LM

U ø2

8.

ø 2 2.

Br az ed ø1 9.

B ra ze d *1

(U se s w he n tw in ni ng k it

(o pt io na l p ar ts

) i s m ou nt ed ø4

K no ck ou t h ol e

S pe ci fic at io ns ø4 3.

or ø

.2 K no ck ou t h ol e ø6 2.

or ø

.5 K no ck ou t h ol e

Fr on t t hr ou gh h ol e

Bo tto m th ro ug h ho le

Bo tto m th ro ug h ho le

Fr on t t hr ou gh h ol e

Fr on t t hr ou gh h ol e

Fo r w ire s

U sa ge

Fr on t t hr ou gh h ol e

Fr on t t hr ou gh h ol e

K no ck ou t h ol e

K no ck ou t h ol e Bo tto m th ro ug h ho le

Fo r p ip es ø5

K no ck ou t h ol e

Fo r t ra ns m is si on c ab le s ø3

K no ck ou t h ol e ø6

K no ck ou t h ol e

(1

(1 -1

/8

(7 /8

(3

/4

(1 -3

/4

(7 /8

(1 -3

/8

(2 -1

/1 6)

1 2 43 5 6 7N O

29.5

54(2-3/16)

(2

-5 /1

6)

(4

1- 3/

4)

6(

-1

/8

600=150×4

(3

(4 8-

1/

1650(65)

1347(53-1/16)

29.5

740(29-3/16)

(4 6-

1/ 2)

0(

5- 9/

681(678~684)

.5

.5

327(12-7/8)

N ot e1 .P le as e re fe r t o th e en gi ne er in g m an ua l f or in fo rm at io n ga rd in g ne ce ss ar y sp ac in g ar ou nd th e un it an d fo un da tio n w or k.

O ut do or u ni t m us t b e m ou nt ed a t l ea st

" o ff th e gr ou nd o r 1

2" a bo ve th e hi gh es t a ve ra ge s no de pt h, w hi ch ev er is g re at er

PURY-P96TLMU-A(-BS)

B65 0057 Relocate Maintenance Facilities, Sandy Hook Contract# 106806-S-007 (Prime Contract P17PC00406)

Specifications are subject to change without notice. © 2016 Mitsubishi Electric US, Inc.

1340 Satellite Boulevard. Suwanee, GA 30024 Toll Free: 800-433-4822 www.mehvac.com

Twinning Kit: CMY-ER200CBK

FORM# PURY-P192TSLMU-A (-BS) - 201605

2 - 265

R

9. OPTIONAL PARTS DATA U11

MEE14K031

9-2. OUTDOOR TWINNING KIT

The following optional Outdoor Twinning Kit is needed to use to combine multiple refrigerant pipes. Refer to the chapter entitled System Design Section for the details of selecting a proper twinning kit.

High-pressure twinning pipe

Low-pressure pipe twinning kit <Elbow pipe(Accessory)>

<Accessory> Fixing screw • • • 1 Pipe cover • • • 1 Cable tie • • • 2 Insulation cover • • • 1 Buffer • • • 1(Outside diameter)

(Outside diameter)

<Pipe for routing through the front (Accessory)>

(Outside diameter)

<Pipe for routing through the bottom (Accessory)> high-pressure side

Slope of the twinning pipe is at an angle within ±15° to the horizontal plane.

Note 1:Refer to the figure below for the installation position of the twinning pipe.

2:Pipe diameter is indicated by inside diameter.

Twinning pipe on the

(Outside diameter)

(Outside diameter)

(Outside diameter)

(Outside diameter)

<Deformed pipe(Accessory)>

<Deformed pipe(Accessory)>

50(2)

(2

(1

-7 /1

6)

80(3-3/16) ø28.58(ø1-1/8) ø28.58(ø1-1/8) ø22.2(ø7/8) ø22.2(ø7/8)

100(3-15/16)

7 30 ø28.58(ø1-1/8) ø28.58(ø1-1/8)

407(16-1/16)

17(11/16)117(4-5/8) ø22.2(ø7/8)

6(

5- 3/

4) ø19.05(ø3/4) ø22.2(ø7/8) ø25.4(ø1) ø19.05(ø3/4)

±1 5° ø19.05(ø3/4) ø25.4(ø1) ø19.05(ø3/4)

182(7-3/16)

1(

6- 3/

4)

303(11-15/16) ø22.2(ø7/8) ø19.05(ø3/4) ø19.05(ø3/4) ø22.2(ø7/8) ø15.88(ø5/8)ø19.05(ø3/4) ø19.05(ø3/4)ø15.88(ø5/8)

(1 -7

/1 6)

(3Pcs.)

(2 -1

/2

(1 -7

/1 6)

(5/16) (1-3/16)

(2 -3

/1 6)

(1-7/16)

(2-1/2)

(2-1/2)

(2-1/2)

(3-3/8)

Unit: mm (in.)CMY-ER100CBK

<Accessory>

Pipe cover • • • 1 Fixing screw • • • 1

Cable tie • • • 2 Insulation cover • • • 1

(Outside diameter)

(Outside diameter)

(Outside diameter)

(Outside diameter)

High-pressure twinning pipe

Low-pressure pipe twinning kit

<Elbow pipe(Accessory)>

<Deformed pipe(Accessory)>

<Deformed pipe(Accessory)>

<Pipe for routing through the front (Accessory)>

(Outside diameter)

(Outside diameter)

(Outside diameter)

<Pipe for routing through the bottom (Accessory)>

(Outside diameter)

(Outside diameter)

(Outside diameter)

(Outside diameter)

(Outside diameter)

(Outside diameter)

(Outside diameter)

108(4-5/16)

26(1-1/16)

62 17 6(

6-

/1 6)

427(16-13/16) ø31.75(ø1-1/4) ø28.58(ø1-1/8) ø28.58(ø1-1/8) ø22.2(ø7/8) ø34.93(ø1-3/8) ø19.05(ø3/4) ø41.28(ø1-5/8)

160(6-5/16)50(2)

(2 ø28.58(ø1-1/8) ø28.58(ø1-1/8) ø19.05(ø3/4) ø19.05(ø3/4)ø28.58(ø1-1/8) ø31.75(ø1-1/4) ø31.75(ø1-1/4) ø19.05(ø3/4) ø22.2(ø7/8) ø34.93(ø1-3/8)ø31.75(ø1-1/4) ø25.4(ø1) ø19.05(ø3/4) ø25.4(ø1) ø19.05(ø3/4)

303(11-15/16)

182(7-3/16)

0(

3-

/1 6) ø22.2(ø7/8) ø31.75(ø1-1/4) ø28.58(ø1-1/8) ø22.2(ø7/8) ø28.58(ø1-1/8) ø28.58(ø1-1/8)

136(5-3/8) ø22.2(ø7/8) ø19.05(ø3/4) ø19.05(ø3/4) ø22.2(ø7/8) ø15.88(ø5/8)ø19.05(ø3/4) ø22.2(ø7/8)ø28.58(ø1-1/8)

(1) (1-7/16)

(2 -1

/2

1- 5/

(2-1/2)

(2-1/2)

(2-3/4)

(2-1/8)

(2 -1

/8

(2-1/2)

(2-3/4)

(2-1/2)

(1 -7

/1 6)

(3-3/16)

(2-1/2)

(2-1/2)

(2-1/2)

(2-1/2)

(3Pcs.)

(2 -3

/1 6) high-pressure side

Slope of the twinning pipe is at an angle within ±15° to the horizontal plane.

Note 1:Refer to the figure below for the installation position of the twinning pipe.

2:Pipe diameter is indicated by inside diameter.

Twinning pipe on the

±1 5°

Unit: mm (in.)CMY-ER200CBK

The angle of the branch pipe for hign pressure is within against the horizontal plane.

2. Use the attached pipe to braze the port-opening of the distributer.

3. Pipe diameter is indicated by inside diameter.

4. Only use the Twinning pipe by Mitsubishi (optional parts) .

Note 1. Reference the attitude angle of the branch pipe below the fig.

Distributer

0000003529.BOOK 265 ページ 2015年3月19日 木曜日 午後8時10分

Unit: mm (inch)

B65 0057 Relocate Maintenance Facilities, Sandy Hook Contract# 106806-S-007 (Prime Contract P17PC00406)

System Reference: Date:

Specifications are subject to change without notice. © 2018 Mitsubishi Electric US, Inc.

SAMPLE IMAGE FOR REFERENCE

ACCESSORIES:

□ Joint Kit..........................................................................................CMY-R160-J1

□ Branch Joint (T-Branch)...........................................................CMY-Y102SS-G2

□ Condensate Pump (BlueDiamond)…….................................................X87-721

□ Condensate Pump (Sauermann)…........................................……...SI3100-230

□ Ball Valve (3/8” SAE Brazed)……......................................................BV38BBSI

□ Ball Valve (5/8” SAE Brazed)…….......................................................BV58BBSI

□ Sub BC Controller……........................................................CMB-1016NU-HB1*

□ Sub BC Controller……..........................................................CMB-104NU-GB1*

□ Sub BC Controller……..........................................................CMB-108NU-GB1*

*See Submittal for information on each option.

SPECIFICATIONS:

Indoor Unit Capacity Connectable To 1 Branch Btu/h 54,000

Number Of Branches 13

Electrical Requirements

Electrical Power Requirements 208 / 230V, 1 phase, 60Hz

Minimum Circuit Ampacity (MCA) A 1.08 / 0.97

Power Input (208 / 230V)

Cooling kW

0.178

Heating 0.086

Current Input (208 / 230V)

Cooling A

0.86 / 0.77

Heating 0.41 / 0.37

External Dimensions In.(mm) 11-13/32 x 43-23/32 x 20-1/2 (289 x 1,110 x 520)

Net Weight Lbs.(kg) 148 (67)

External Finish Galvanized steel plate

Refrigerant Piping Diameter to Indoor Unit (Brazed)

Liquid Gas less than 18,000 Btu/h In.(mm) 1/4 (6.35) 1/2 (12.7)

18,000 to 54,000 Btu/h In.(mm) 3/8 (9.52) 5/8 (15.88)

54,000 to 72,000 Btu/h In.(mm) 3/8 (9.52) 3/4 (19.05) greater than 72,000 Btu/h In.(mm) 3/8 (9.52) 7/8 (22.2)

Refrigerant Piping Diameter to Air-source Outdoor Units (Brazed)

High Pressure Low Pressure to 72,000 Btu/h In.(mm) 5/8 (15.88) 3/4 (19.05)

73,000 to 108,000 Btu/h In.(mm) 3/4 (19.05) 7/8 (22.2)

109,000 to 126,000 Btu/h In.(mm) 3/4 (19.05) 1-1/8 (28.58)

127,000 to 192,000 Btu/h In.(mm) 7/8 (22.2) 1-1/8 (28.58)

193,000 to 216,000 Btu/h In.(mm) 1-1/8 (28.58) 1-1/8 (28.58)

217,000 to 240,000 Btu/h In.(mm) 1-1/8 (28.58) 1-3/8 (34.93)

Refrigerant Piping Diameter to Water-source Units (Brazed)

High Pressure Low Pressure to 72,000 Btu/h In.(mm) 5/8 (15.88) 3/4 (19.05)

73,000 to 108,000 Btu/h In.(mm) 3/4 (19.05) 7/8 (22.2)

109,000 to 126,000 Btu/h In.(mm) 3/4 (19.05) 1-1/8 (28.58)

127,000 to 192,000 Btu/h In.(mm) 7/8 (22.2) 1-1/8 (28.58)

193,000 to 240,000 Btu/h In.(mm) 1-1/8 (28.58) 1-1/8 (28.58)

Refrigerant Piping Diameter to Sub BC Controller (Brazed)

Liquid High Pressure

Low Pressure to 72,000 Btu/h In.(mm) 3/8 (9.52)

5/8 (15.88)

3/4 (19.05)

73,000 to 108,000 Btu/h In.(mm) 3/8 (9.52)

3/4 (19.05) 7/8 (22.2)

109,000 to 126,000 Btu/h In.(mm) 1/2 (12.7)

3/4 (19.05)

1-1/8 (28.58)

Field Drain Pipe Size In.(mm) 1-1/4 (32)

Refrigerant R410A

Connectable Outdoor Unit

PURY-P-T(S)K/LMU

PURY-P-Y(S)K/LMU

PURY-HP-T(S)KMU

PURY-HP-Y(S)KMU

PQRY-P-T(S)H/LMU

PQRY-P-Y(S)H/LMU

Main BC Controller: CMB-P1013NU-GA1

NOTES:

1. Use Single BC Controller when R2-Series unit capacity is 120,000 Btu/h or less.

2. Use the Reducer (standard accessory) when the indoor unit capacity is 18,000 Btu/h or less.

3. Use Ball Valves to isolate individual branches (recommended).

4. Use Joint Pipe to combine branches when connected indoor unit capacity on a single branch exceeds 54,000 Btu/h.

B65 0057 Relocate Maintenance Facilities, Sandy Hook Contract# 106806-S-007 (Prime Contract P17PC00406)

Specifications are subject to change without notice. © 2018 Mitsubishi Electric US, Inc.

Toll Free: 800-433-4822 www.mehvac.com

Model: CMB-P1013NU-GA1 – DIMENSIONS

Form# CMB-P1013NU-GA1 - 201805

Z

D et ai l o f X s ec tio n D et ai l o f Y s ec tio n

D et ai l o f Z s ec tio n

D ra in h os e

I.D .3

2( 1-

1/ 4"

(A cc es so ry

B an d( A cc es so ry

In do or u ni t m od el

(N ot e 5)

P1 or le ss :ø

6.

(1 /4

Br az ed

P1 ov er

:ø 9.

(3

/8

Br az ed

In do or u ni t m od el

(N ot e 5)

P1 or le ss :ø

.7

(1 /2

Br az ed

P1

.8 8(

5/ 8)

<B ra ze d>

C on ne ct io n pi pe o f in do or u ni t(G as

C on ne ct io n pi pe o f in do or u ni t(L iq ui d)

C on ne ct io n pi pe o f

S U

B B

C C

O N

TR

O

LL

E

R

(L ow p re ss ur e)

C on ne ct io n pi pe o f

S U

B B

C C

O N

TR

O

LL

E

R (L iq ui d)

C on ne ct io n pi pe o f

S U

B B

C C

O N

TR

O

LL

(H h pr es su re

<A cc es so rie s>

Re fri ge ra nt

<L ow p re ss ur e> co nn . p ipe

·1 pc

Re fri ge ra nt <H igh p re ss ur e> co nn

. p ipe

2p cs

Dr ain h os e

I.D .3

2( 1-

1/ 4"

·1 pc

Ho se b an d·

1p c.

Tie b an d·

1p c.

No te

1.

Su sp en sio n bo lt( ø1 0)

,w as he r(M

),a nd n ut (M p pa re in th e fie ld.

.Ta ke n ot ice o f s er vic e sp ac e as fo llo ws

Pl ea se g ive a tte nt ion n ot to o cc up y s er vic sp ac e by le ttin g du cts a nd p ipe s t hr ou gh

.P lea se ta ke se rv ice sp ac e fo r c on ne cti on p ipe o f S

UB

B C

CO

NT

RO

LL

ER

.In sta ll t his p ro du ct in a loc at ion w he re n ois e

(re fri ge ra nt n ois m itte d by th e un it w ill no t d ist ur b th e ne igh bo rs

Fo r u se in q uie t e nv iro m en ts wi th lo w ba ck gr ou nd n ois e, po sit ion th

BC

C

ON

TR

OL

LE

R at le as t 5 m a wa y f ro m a ny in do or u nit s.)

.R ef er to th e

In sta lla tio n M an ua l fo r r ef rig er an t p ipi ng d iam et er si he n co nn ec tin g plu ra l in do or u nit s w ith b ra nc h.

P

6~ P

4:

ø2 8.

(1

-1 /8

B ra d>

C ne ct io n pi pe o f o ut do or u ni t p re ss ur e)

To ta l c ap ac ity o f i nd oo r u ni t at

S U

B B

C C

O N

TR

O

LL

E

R P or le ss ø9 .5

2( 3/

8) <B ra ze d> P

.7

(1 /2

B ra ze d> (u se a tta ch m en t p ip e of

S U

B B

C C

O N

TR

O

LL

E

R

To ta l c ap ac ity o f i nd oo r u ni t at

S U

B B

C C

O N

TR

O

LL

E

R P o r l es s :ø

.0

5( 3/

4) <B ra ze d> (u se a tta ch m en t p ip e of

S U

B B

C C

O N

TR

O

LL

E

R

P

~P

:ø

.2

(7 /8

B ra ze d> P

.5

8( 1-

1/ 8)

<B ra ze d>

(u se a tta ch m en t p ip e of S

U B

B C

C O

N

TR

O

LL

E R

To ta l c ap ac ity o f i nd oo r u ni t at

S U

B B

C C

O N

TR

O

LL

E

R P o r l es s :ø

.8

8( 5/

8) <B ra ze d> (u se a tta ch m en t p ip e of

S U

B B

C C

O N

TR

O

LL

E

R

P o ve r :ø

.0

5( 3/

4) <B ra ze d>

C on tro l b ox

X Y

(Lifting bolt pitch)

(L ift in g bo lt pi tc h)

C ut tin g po in t

C ut tin g po in t

(In do or u ni t M od el

:P o ve r)

(In do or u ni t M od el

:P o r l es s)

B A 9

0(

-7

/1 6)

CM

B- P1

6N

U-

GA

0(

-3 /8

0(

-9 /3

2)

0(

-9 /1

6)

CM

B-

P1

3N U-

GA

CM

B-

P1

NU

-G

A1

CM

B- P1

0N

U-

GA

(3 -9

/1 6)

(1 -1

3/

(1-3/32)

(2-5/16)

(2 -3

/8

(25-17/32)

(10-1/4)

(11-13/32)

(2 -3

/8

(7 -7

/8

(3

(5-1/8)(4-1/16) (9-25/32)

(5-1/8)(3-5/32) (9-31/32)

(5 -1

/8

(2 9/

(4 5-

/3

2)

(4 3-

/3

2)

(15-9/32)

(17-23/32)

(2-25/32) (10-9/16)

(8-9/32) (4-1/16)

(2 -5

/8

(5 -1

/1 6)

(2 -1

5/

(3 -9

/1 6)

(1-1/4)

(1/2)

(1-3/16)

(9 /1

6)

(N ot e 2,

3) A cc es s do or

0□

S er vi ce sp ac e

(7 -7

/8

(7 -7

/8

(9-27/32)(27-9/16)

(7 -7

/8

(1 7-

/3

2) ø31

103 130

(2

-3 /8

A

=B

(2

-3 /8

A

=B

25380

(700)

(2

P

4~ P

4:

ø2 8.

(1

-1 /8

B ra ze d> (u se a tta ch m en t p ip

e) P

4~

P

2:

ø2

2.

2(

7/ 8)

<B ra ze d>

C on ne ct io n pi pe o f o ut do or u ni t(H ig h pr es su

P

6:

ø1

9.

(3 /4

B ra ze d> (u se a tta ch m en t p ip e)

S ec on da ry dr ai n

O

.D .3

2( 1-

1/ 4"

P rim ar y dr ai n pi pe O

.D .3

2( 1-

1/ 4"

Units: mm (in.)

B65 0057 Relocate Maintenance Facilities, Sandy Hook Contract# 106806-S-007 (Prime Contract P17PC00406)

Specifications are subject to change without notice. © 2018 Mitsubishi Electric US, Inc.

System Reference: Date:

SAMPLE IMAGE FOR REFERENCE

ACCESSORIES:

□ Joint Kit..........................................................................................CMY-R160-J1

□ Branch Joint (T-Branch)...........................................................CMY-Y102SS-G2

□ Condensate Pump (BlueDiamond)…….................................................X87-721

□ Condensate Pump (Sauermann)…........................................……...SI3100-230

□ Ball Valve (3/8” SAE Brazed)……......................................................BV38BBSI

□ Ball Valve (5/8” SAE Brazed)…….......................................................BV58BBSI

SPECIFICATIONS:

Indoor Unit Capacity Connectable To 1 Branch Btu/h 54,000

Number Of Branches 8

Electrical Requirements

Electrical Power Requirements 208 / 230V, 1 phase, 60Hz

Minimum Circuit Ampacity (MCA) A 0.64/0.58

Power Input (208 / 230V)

Cooling kW

0.106

Heating 0.053

Current Input (208 / 230V)

Cooling A

0.51 / 0.46

Heating 0.25 / 0.23

External Dimensions In.(mm) 11-3/16 x 25-17/32 x 17-1/32 (284 x 648 x 432)

Net Weight Lbs.(kg) 82 (37)

External Finish Galvanized steel plate

Refrigerant Piping Diameter to Indoor Unit (Brazed)

Liquid Gas less than 18,000 Btu/h In.(mm) 1/4 (6.35) 1/2 (12.7)

18,000 to 54,000 Btu/h In.(mm) 3/8 (9.52) 5/8 (15.88)

54,000 to 72,000 Btu/h In.(mm) 3/8 (9.52) 3/4 (19.05) greater than 72,000 Btu/h In.(mm) 3/8 (9.52) 7/8 (22.2)

Refrigerant Piping Diameter to Sub BC Controller (Brazed)

Liquid High Pressure

Low Pressure to 72,000 Btu/h In.(mm) 3/8 (9.52)

5/8 (15.88)

3/4 (19.05)

73,000 to 108,000 Btu/h In.(mm) 3/8 (9.52)

3/4 (19.05) 7/8 (22.2)

109,000 to 126,000 Btu/h In.(mm) 1/2 (12.7)

3/4 (19.05)

1-1/8 (28.58)

Field Drain Pipe Size In.(mm) 1-1/4 (32)

Refrigerant R410A

Sub BC Controller: CMB-P108NU-GB1

NOTES:

1. Use the Reducer (standard accessory) when the indoor unit capacity is 18,000 Btu/h or less.

2. Use Ball Valves to isolate individual branches (recommended).

3. Use Joint Pipe to combine branches when connected indoor unit capacity on a single branch exceeds 54,000 Btu/h.

B65 0057 Relocate Maintenance Facilities, Sandy Hook Contract# 106806-S-007 (Prime Contract P17PC00406)

Specifications are subject to change without notice. © 2018 Mitsubishi Electric US, Inc.

Toll Free: 800-433-4822 www.mehvac.com

Model: CMB-P108NU-GB1 – DIMENSIONS

Form# CMB-P108NU-GB1 - 201805

Z

D et ai l o f X s ec tio n D et ai l o f Y s ec tio n

D et ai l o f Z s ec tio n

D ra in h os e

I.D .3

2( 1-

1/ 4"

(A cc es so ry

)B an d( A cc es so ry

In do or u ni t m od el

(N ot e 5)

P o r l es s

:ø 6.

(1

/4

B ra ze d>

P o ve r :ø

9.

(3 /8

B ra ze d>

In do or u ni t m od el

(N ot e 5)

P o r l es s

:ø

.7 (1

/2

B ra ze d>

P o ve r :ø

.8

8( 5/

8) <B ra ze d>

Y

To ta l c ap ac ity o f i nd oo r u ni ts a t S U

B B

C C

O N

TR

O

LL

E

R P o r l es s :ø

.0

5( 3/

4) <B ra ze d> (u se a tta ch m en t p ip

e) P

~P

:ø

.2 (7

/8

B ra ze d>

P

.5 8(

1- 1/

8) <B ra ze d> (u se a tta ch m en t p ip e)

To ta l c ap ac ity o f i nd oo r u ni ts a t S U

B B

C C

O N

TR

O

LL

E

R P o r l es s :ø

.8

8( 5/

8) <B ra ze d> (u se a tta ch m en t p ip

e) P o ve r

:ø

.0 5(

3/ 4)

<B ra ze d>

To ta l c ap ac ity o f i nd oo r u ni ts a t S U

B

BC

C O

N

TR

O

LL

ER

P1 o r l es s :

ø9

.5 2(

3/ 8)

<B ra ze d>

P1 o ve r :ø

.7

(1 /2

Br az ed us e at ta ch m en t p ip e)

<A cc es so rie s>

Re fri ge ra nt

<L ow p re ss ur e> co nn . p ipe

··4 pc s.

Re fri ge ra nt <H igh p re ss ur e> co nn

. p ipe

·2 pc s.

Re fri ge ra nt

<L iqu id> co nn . p ipe

··2 pc s.

Dr ain h os e

I.D .3

2( 1-

1/ 4"

··1 pc

Ho se b an d·

·1 pc

Tie b an d·

·1 pc

No te

1.

Su sp en sio n bo lt( ø1 0)

,w as he r(M

),a nd n ut (M p pa re in th e fie ld.

.Ta ke n ot ice o f s er vic e sp ac e as fo llo ws

Pl ea se g ive a tte nt ion n ot to o cc up y s er vic s pa ce b y l et tin g du cts a nd p ipe s t hr ou gh

.C an

't u se si ng len es s.( M

AI

N

BC

C

ON

TR

OL

LE

R is ne ce ss ar y.)

.In sta ll t his p ro du ct in a loc at ion w he re n ois e (re fri ge ra nt n ois m itte d by th e un it w ill no t d ist ur b th e ne igh bo rs

Fo r u se in q uie t e nv iro m en ts wi th lo w ba ck gr ou nd n ois e, po sit ion t

B

C

CO

NT

RO

LL

ER

a t le as t 5 m a wa y f ro m a ny in do or u nit s.)

.R ef er to th e

In sta lla tio n M an ua l fo r r ef rig er an t p ipi ng d iam et er si n co nn ec tin g plu ra l in do or u nit s w ith b ra nc h.

ne ct io n pi pe o f M

A

IN

B C

C O

N

TR

O

LL

E R

(L iq ui d) ne ct io n pi pe o f M

A

IN

B C

C O

N

TR

O

LL

(H h pr es su re

C on ne ct io n pi pe o f M

A

IN

B C

C O

N

TR

O

LL

p re ss ur e )

C on tro l b ox

(Lifting bolt pitch)

(L ift in g bo lt pi tc

h) C on ne ct io n pi pe o f in do or u ni t(L iq ui d)

C on ne ct io n pi pe o f in do or u ni t(G as

X

C ut tin g po in t

C ut tin g po in t

(In do or u ni t M od el

:P o ve r)

(In do or u ni t M od el

:P o r l es s)

A B

CM

B-

P1

NU

-G

B1

CM

B- P1

NU

-G B1

0( 7-

3/

0(

-9 /1

6)

P rim ar y dr ai n

O .D

.3 2(

1- 1/

4"

(1-1/4)

(1/2)

(1-3/16)

(9 /1

6)

(3 -9

/1 6)

(1 -1

3/

(1-3/32)

(2-5/16)

(2 -3

/8

(5-1/16)

(10-1/16)

(11-3/16)

(2 -3

/8

(7 -7

/8

(3

(5-1/8)(4-1/16)

(9-25/32)

(5-1/8)(3-3/32) (7-5/32)

(5 -1

/8

(2 9/

(2 7-

/3

2)

(2 5-

/3

2)

(6-21/32)

(11-3/4)

(14-9/32) (2-25/32)

(1 -2

5/

(N ot e 2)

S er vi ce s pa ce

A cc es s do or

0 □

(7 -7

/8

(9-27/32) (27-9/16)

(7 -7

/8

(1 7-

/3

2) ø31

130 23

60 60

(2 -3

/8

A =B

(2

-3 /8

A

=B

(700)

(2

S ec on da ry d ra in p ip e O

.D .3

2( 1-

1/ 4"

CMB-P104, 108NU-GB1

B65 0057 Relocate Maintenance Facilities, Sandy Hook Contract# 106806-S-007 (Prime Contract P17PC00406)

Job Name_8:
System Reference_8:
Date_8:
Standard Model_8: Off
Seacoast BS Model_8: Off
Twinning Kit required_3: On
Joint Kit_8: Off
BC Controller required_8: On
Low Ambient Kit_8: Off
SnowHail Guards Kit_8: Off
Job Name:
System Reference:
Date:
Joint Kit: Off
Branch Joint TBranch: Off
Condensate Pump BlueDiamond: Off
Ball Valve 38 SAE Brazed: Off
Ball Valve 58 SAE Brazed: Off
Sub BC Controller: Off
Sub BC Controller_2: Off
Sub BC Controller_3: Off
Job Name_2:
System Reference_2:
Date_2:
Joint Kit_2: Off
Condensate Pump Sauermann_2: Off
Ball Valve 38 SAE Brazed_2: Off
Ball Valve 58 SAE Brazed_2: Off

File details come from the government source that posted it. Updated .