A04-SOW-Mobile_Column_Lift_Specs_2024.docx
DOCX document 18 KB Posted
- Attached to
- CACO-PROCURE WIRELESS MOBILE COLUMN LIFT
- Solicitation number
- 140P4324Q0069
About this file
This document is a Scope of Work (SOW) for the procurement of four (4) heavy-duty wireless mobile column lifts and four (4) jack stands for the National Park Service's Cape Cod National Seashore.
The SOW specifies the required technical and performance characteristics for the mobile column lifts, including a minimum 18,000 lbs. capacity per post, wireless operation, and compatibility with the park's existing Mohawk Custom Beam Adapter. It also details the requirements for the jack stands, including a 20,000 lbs. capacity per stand and the ability to fold flush when not in use. The contractor will be responsible for providing, delivering, assembling, installing, and training park staff on the use of the equipment. The contract opportunity associated with this SOW is Solicitation Number 140P4324Q0069, issued by the Department of the Interior National Park Service Northeast Region.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140P4324Q0069_Amd_0001.pdf | ||
| Amd0001_0001.docx | DOCX document | |
| Sol_140P4324Q0069.pdf | ||
| B03-WD-2015-4045-Rev28-4_19_24.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
National Park Service Cape Cod National Seashore 204 Marconi Maintenance Road Wellfleet, MA 02667
Scope of Work (SOW) — Mobile Column Lift
The contractor will provide, deliver of the mobile column lifts, and jack stands, the contractor will assemble, install and setup the mobile column lifts and jackstands, and the contractor will provide training to the park staff in the use and operation of the four (4) heavy-duty WIRELESS mobile columns (lifts) and four (4) jack stands. The location is 204 Marconi Maintenance Road, Wellfleet, MA 02667.
Wireless Mobile Column (Lift) Specifications (Mohawk MP-18 or similar):
· Shall be rated with at least 18,000 lbs. capacity per post.
· Shall operate all columns together, individually or divided into multiple pairs (2, 4, 6 or 8). System shall be ALI-ETL certified.
· Shall have a motor rating of 2.5 H.P.
· Shall utilize 24-volt operation with built-in 110-volt charging. Charging shall adapt via a factory furnished chord and chord cap.
· Shall have a direct drive hydraulic cylinders lifting mechanism.
· Shall have a minimum lifting height of 67”.
· Lifting forks shall be a minimum of 15” and seamlessly adapt and connect to the park-owned Mohawk Custom Beam Adapter, Model ZZ1252-A-001.
· Shall have a lifting forks range of 13” to 24” wheels.
· Shall have a minimum clearance of 10” between the carriage and vehicle.
· Shall have a pallet jack mechanism with OSHA-approved handle and pressure relief valve as a steering system.
· Shall have a minimum of 19 mechanical safety locking positions starting at 12”.
· Shall operate on any hard, level surface (3-degree maximum floor slope).
Jack Stand Specifications (Mohawk JS-4775-20 HD or similar):
· Shall be rated with at least 20,000 lbs. capacity per stand.
· Shall have a minimum height range of 47” to 77”.
· Shall have the ability to fold flush when not in use and roll along the length of the lift to any position along the runways to raise any part of a vehicle.
· Shall have a lock that safely secures it in position.
· Shall be Portable Automotive Service Equipment (PASE) certified.
The system shall be certified by a Nationally Recognized Testing Laboratory (NRTL) to meet ANSI/ALI ALCTV:2017
File details come from the government source that posted it. Updated .