A04_SOW.pdf

U.S. Fish and Wildlife Service – Green Lake N.F.H. 1 of 2 Technical Specifications – Replacement of 2,000-gallon Fuel Storage Tank

TECHNICAL SPECIFICATIONS

Replacement of 2,000-Gallon Fuel Storage Tank

PART 1 - PROJECT OVERVIEW

A. NOTICES

1. Project Information

Project Title: Replace 2,000-Gallon Fuel Storage Tank

Locations: U.S. Fish & Wildlife Service Green Lake National Fish Hatchery

One Hatchery Way Ellsworth, ME 04605

Contracting Officer (CO): TBD

Project Engineer / Contracting Brian Waz, brian_waz@fws.gov, (413)-253-8605

Officer’s Representative (COR):

FWS Hatchery P.O.C.: Craig Knights, craig_knights@fws.gov, (207)-317-2123

B. PROJECT DETAILS

1. Contract Work:

This Contract is to remove and dispose of the existing 2,000-gallon above ground diesel fuel storage tank with a 1,000-Gallon above ground diesel Fuel Storage Tank, reconnect all existing supply lines, and install existing equipment. The tank will be replacing an existing failing tank and will be placed on an existing concrete slab on grade outside to supply diesel fuel for an emergency generator.

The tank shall comply with all industry standard best practices, regulations, and materials.

2. Hatchery Operations:

Hatchery operations will continue during the performance of this contract. The Contractor shall coordinate with the Hatchery P.O.C. above and mutually decide on the best time to perform the work.

3. Anticipated Award Period / Contract Type:

The Government anticipates a firm-fixed priced award of this contract July 2025.

4. Completion Date:

The work shall be completed no later than 30 calendar days from the Notice to Proceed issued by the Contracting Officer.

U.S. Fish and Wildlife Service – Green Lake N.F.H. 2 of 2 Technical Specifications – Replacement of 2,000-gallon Fuel Storage Tank

PART 2 – SCOPE OF SERVICES

A.

1. SCOPE

Replacement of 2,000-gallon Fuel Storage Tank (Base Bid Item):

The Contractor shall provide including but not limited to:

Supply all labor, equipment, materials, and supplies necessary to remove the existing 2,000 – Gallon fuel tank and replace with a new 1,000-gallon fuel tank (Refer to App. 1 for photos of existing system).

Disconnect existing piping from exiting 2,000-gallon fuel tank.

Remove existing 2,000-gallon tank from existing concrete pad.

Properly treat and dispose of exiting 2,000-gallon fuel storage tank as per environmental standards and regulations.

Set new 1,000-gallon fuel storage tank on existing concrete pad.

Reconnect existing supply and return lines.

Fit new tank with government supplied equipment (i.e. pump).

Tank Specifications:

1,000 – Gallon Above Ground Diesel Fuel Storage Tank (No pump needed) Tank must meet all safety requirements for primary and secondary containment, leak monitoring, spill containment, and overfill protection.

2. Project Submittals:

The following information is required from the Contractor, but not limited to:

Manufacturer’s Technical Data and Specifications Manufacturer’s Installation Instructions Warranty information

Submittals shall be emailed to the following:

Contracting Officer (CO): TBD

Project Engineer / Contracting Officer’s Representative (COR): Brian Waz, brian_waz@fws.gov, (413)-253-8605

APPENDIX 1:

Photographs

2,000 –gallon Fuel Storage Tank and Components

Photo #1: View of 2,000-gallon fuel storage tank.

Photo #2: End view of 2,000-gallon fuel storage tank.

Photo #3: End view of 2,000-gallon fuel storage tank with supply and return lines.

Photo #4: View of tank lines.

Photo #5: View of tank lines.