A04_SOW_Boat_Lift_Temple_Bar_(9_5_24).docx

DOCX document 18 KB Posted

Attached to
LAKE24-0142-LIFT FOR RANGER BOAT @ TB
Solicitation number
140P8124Q0096
Issued by

About this file

This document is a Statement of Work (SOW) for the acquisition and installation of a floating boat lift at the Temple Bar Marina, which is part of the Lake Mead National Recreation Area. The key details are:

The required boat lift must have a 10,000 lb. capacity, accommodate boats between 21-26 feet in length, and be suitable for use in an extreme climate with temperatures over 100°F for over 100 days per year. The lift must be simple to operate, able to drop the boat into the water without power, and have repair services available within a 100-mile radius. The vendor will be responsible for acquiring, delivering, and installing the lift in one of the government-leased slips at the marina, with work to be completed by 11/07/2024 during normal business hours. The slip location will be indicated by National Park Service personnel.

This SOW is associated with a federal contract opportunity, Solicitation Number 140P8124Q0096, issued by the Department of the Interior National Park Service Pacific West Region for a "BOAT LIFT AND INSTALL FOR TEMPLE BAR AT LAKE MEAD NRA."

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

09/05/2024 Specifications and Statement of Work

Specifications:

- Hydrohoist Ultralift 10000UL2 (OR EQUAL)

- Floating boat lift that uses air to fill pontoons that lift boat completely clear of the water

- 10,000 lb. boat capacity
- Min. Water Depth, 6.5 ft; Min. Slip Width, 10 ft; Max. Slip Width, 18 ft

-Lift should be simple to operate with a valve control and power switch for the air pump. An additional quick launch pull-up lever is acceptable.

-Lift shall be for v-hull boat – to include Safeboats, Boston Whalers, 25 ft. Rogue jetboat, or others.

-Lifted boats may be either inboard jet or outboard propeller driven.

-Boats lifted will be 21 feet to 26 feet in length -Lift will be installed and permanently attached in a 12 foot wide, u-shaped slip with 30 amp electric service available.

-Lift will have 4 arms, with two on each side of the lift, that permanently secure the lift to the slip and allow for the rise and drop of the lift.

-Lift shall be able to drop the vessel into the water in a controlled manner and without physical exertion in the event electrical power is lost to the lift.

-Lift will be used in an extreme climate where heat exceeds 100 degrees Fahrenheit for over 100 days per year, and over 115 degrees Fahrenheit for at least 60 to 75 days per year.

-Service/repair for the boat lift should be available within a 100 mile radius from Lake Mead NRA Willow Beach area.

Statement of Work:

-Vendor will acquire, deliver, and install floating boat lift in one of the Government leased slips at the Temple Bar marina. Temple Bar is a developed area with a marina that is part of the Lake Mead National Recreation Area. The marina facilities are government owned, but concession operated. Temple Bar is located in Arizona, off of US Highway 93. The access road to Temple Bar is located near milepost 19 on Highway 93 and is approximately a 27 mile drive to the marina from the highway.

-Work can only take place Monday through Friday, avoiding any holidays that may fall on those days. Work will take place during the marina operating hours of 8AM to 4PM (MST).

-Work shall be completed by 11/07/2024 -Vendor will be responsible for installation of new lift and removal of all shipping and work materials.

-The slip that the hoist will be installed will be indicated on site by NPS personnel, as there are no slip numbers or designation on this portion of the marina. It is on a section marina dock that is covered.

File details come from the government source that posted it. Updated .