A04 DWG 8905625.pdf

NAVAL SURFACE WARFARE CENTER

P6

8 4X

A

A

P2

P3

11 2X

P1

11 2X

SECTION A-A

1 53711-8905625-1 HOUSING, CONTROL, UNDERWATER MINE EX 1 MOD 0.

4 11 M24308/26-1F SCREWLOCK, FEMALE MIL-DTL-24308/26

AR 10 ANTISIEZE COMPOUND MIL-PRF-83483E

1 9 SAE AS25281-F3 CLAMP, CABLE SAE AS25281

4 8 NAS1351C3-8 SOCKET HEAD SCREW, 10-32X .5 NAS1351

1 7 MS51957-43 SCREW, 8-32 X.38 MACH PAN HEAD MS51957

2 6 MS51957-4 SCREW, 2-56X.31 MACH PAN HEAD MS51957

2 5 NASM35338-134 WASHER, LOCK-SPRING #2 NASM35338

1 4 53711 6665799 HOUSING ADAPTER MK 157

1 3 53711 8905630 TIM WIRING HARNESS

1 2 53711 8905627 TIM ASSEMBLY

X 1 53711 8905625-1 HOUSING, CONTROL, UNDERWATER MINE EX 1

MOD 0

QTY-

FIND

NO. DAI PART NUMBER DESCRIPTION SPECIFICATION MATERIAL NOTE

REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

- INITIAL RELEASE

NONE

THIRD ANGLE PROJECTION

INTERPRET DRAWING PER ASME Y14.100

PART SHALL BE FREE OF BURRS

SURFACE ROUGHNESS

DO NOT SCALE THIS DRAWING

FRACTIONS

ANGLES

DECIMALS

BROKEN EDGES

FILLETS

TOLERANCES

DIMENSIONS ARE IN INCHES

NONE

MAJOR

CRITICAL

DOD-STD-2101

CHARACTERISTICS PER

CLASSIFICATION OF

UNLESS OTHERWISE SPECIFIED

NOTES:

APPLY ANTISIEZE, FN 10, TO THREADS AT ASSEMBLY.1.

TORQUE SCREWS:2.

(FIND NO. 6) TO 2 IN LBS.

(FIND NO. 7) TO 14 IN LBS.

(FIND NO. 8) TO 22.5 IN LBS.

INSTALL SCREWLOCK, FEMALE, FN 11, INTO HOUSING, FN 4. USE TWO FLAT WASHERS AS 3.

SPACER BETWEEN THE SCREWLOCK AND THE HOUSING. DISCARD REMAING HARDEWARE.

INSTALL TIM ASSEMBLY, FN 2, USING 10-32 FLAT HEAD SCREW, FN 8. 4.

INSTALL P1, P2, P3 AND P6 OF TIM WIRING HARNESS, FN 3, TO TIM ASSEMBLY, FN 2, AND HOUSING ADAPTER MK 157, FN 9, AS SHOWN.5.

FOR SHIPPING AND STORAGE, SEE DWG 6665892.6.

INSTALL SCREWLOCK, FEMALE, FN 11, INTO HOUSING, FN 4. USE TWO FLAT WASHERS AS A SPACER BETWEEN 7.

THE SCREWLOCK AND THE HOUSNG. DISCARD REMAINING HARDWARE.

TIM WIRING ASSEMBLY, FN 3, CABLE P6 TO BE CENTERED APPROXIMATELY IN CABLE CLAMP, FN 9. THE CABLE CLAMP TO BE8.

APPROXIMATELY PERPENDICULAR TO HOUSING WALL, AS SHOWN IN VIEW A-A.

SCALE 1:2

SIZE

APPROVED FOR NSWC PCD

D

APPROVED

ENGINEER

CHECKER

DRAFTER

1 1

OFUNIT WT. SHEET

DWG. NO.CAGE CODE REV.

NAVAL SEA SYSTEMS COMMAND

WASHINGTON NAVY YARD DC 20376-0005

DEPARTMENT OF THE NAVY

DISTRIBUTION STATEMENT D: DISTRIBUTION

AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND

U.S. DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, NOVEMBER 2024. OTHER U.S.

REQUESTS SHALL BE REFERRED TO PEO USC PMS 495.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL

DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC.

2751, et. Seq.) OR THE EXPORT ADMINISTRATION

ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP.

2401 et. seq.). VIOLATIONS OF THESE EXPORT LAWS

ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF

DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE - CLASSIFIED INFORMATION,

DESTROY IN ACCORDANCE WITH THE SECNAV

M-5510.36, DON INFORMATION SECURITY PROGRAM

OR DOD 5220.22-M, NATIONAL INDUSTRIAL

SECURITY PROGRAM OPERATING MANUAL.

UNCLASSIFIED LIMITED DOCUMENTS, (e.g., FOUO, DISTRIBUTION STATEMENT CONTROL), DESTROY BY

ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

8905585-18905585-1

PANAMA CITY

REV

STATUS

REV SH

SH

SH

PROJECT TITLE

APPLICATION

NEXT ASSY USED ON

REVREV

1/32 1° .X

.XX

.XXX

APPROVED FOR NAVSEA

HOUSING, CONTROL,

UNDERWATER MINE EX 1

MOD 0

.05

.02

.010

.015 MAX

.015R MAX

890562553711

17.73 LBS

MK 68 MOD 1

M. Denny

A A

B B

C C

D D

CONTROLLED BY: DEPARTMENT OF NAVY

CONTROLLED BY: PMS 495

CUI CATEGORY: CTI

DISTRIBUTION STATEMENT: D

POC: ERIC GONZALEZ, (202) 781-1560

CUI

CUI

NAVAL SURFACE WARFARE CENTERDOD-STD-2101

CHARACTERISTICS PER

CLASSIFICATION OF

CRITICAL

MAJOR

WASHINGTON NAVY YARD DC 20376-0005

NAVAL SEA SYSTEMS COMMAND

DEPARTMENT OF THE NAVY

1 53711- 8905627-1 TIM ASSEMBLY

NOTES:

APPLY MOLYCOTE 33, FN 4, TO O-RING ON CONNECTOR D38999/24WB35SN1 IN THE TIM PCB, FN 2.1.

INSTALL TIM PCB, FN 2, INTO TIM INTERFACE PLATE, FN 3, AND SECURE WITH NUT FROM D38999/24WB35SN1 CONNECTOR. 2.

TORQUE TO 40-46 INCH-LBS. COAT THREADS OF CONNECTOR WITH AN0321, FN 6, BEFORE INSTALLING THE NUT.

POT TIM PCB, FN 2, WITH M23586-1-1-B1, FN 5, LEAVING THE TOP OF THE 27 PIN M83-LMT1M2N27-0000-00 EXPOSED. 3.

AR 6 AN0321 THREADLOCKING COMPOUND ASTM D5363 ALSO KNOWN AS LOCTITE 242.

AR 5 M23586-1-1-B1 POTTING MATERIAL MIL-PRF-23586

AR 4 MOLYKOTE 33 EXTREME LOW TEMP BEARING GREASE

1 3 53711 8905628 TIM INTERFACE PLATE

1 2 53711 8905629 TIM CCA

X 1 53711 8905627-1 TIM ASSEMBLY

QTY-

FIND

NO. DAI PART NUMBER DESCRIPTION SPECIFICATION MATERIAL NOTE

REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

- INITIAL RELEASE

A A

B B

C C

D D

SIGNATURE AUTHORITY

1/1/1999

THIRD ANGLE PROJECTION

INTERPRET DRAWING PER ASME Y14.100

PART SHALL BE FREE OF BURRS

SURFACE ROUGHNESS

DO NOT SCALE THIS DRAWING

INTERPRET DIMENSIONING AND

TOLERENCING PER ASME Y14.5-2018

FRACTIONS

ANGLES

DECIMALS

BROKEN EDGES

FILLETS

TOLERANCES

DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE SPECIFIED

SCALE 2:1

APPROVED

UNIT WT. 1 LBS SHEET 1 OF 1

PANAMA CITY

REV

STATUS

REV SH

SH

SH

TITLE

APPLICATION

NEXT ASSY USED ON

REVREV

1/32 1° .X

.XX

.XXX

APPROVED FOR NAVSEA

TIM ASSEMBLY

.05

.02

.010

.015 MAX

.015R MAX

8905627 -537118905585-18905625-1

CONTROLLED BY: DEPARTMENT OF NAVY

CONTROLLED BY: PMS 495

CUI CATEGORY: CTI

DISTRIBUTION STATEMENT: D

POC: ERIC GONZALEZ, (202) 781-1560

CUI

CUI

DISTRIBUTION STATEMENT D: DISTRIBUTION

AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND

U.S. DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 1/1/1999. OTHER U.S.

REQUESTS SHALL BE REFERRED TO PEO USC PMS 495.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL

DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC.

2751, et. Seq.) OR THE EXPORT ADMINISTRATION

ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP.

2401 et. seq.). VIOLATIONS OF THESE EXPORT LAWS

ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF

DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE - CLASSIFIED INFORMATION,

DESTROY IN ACCORDANCE WITH THE SECNAV

M-5510.36, DON INFORMATION SECURITY PROGRAM

OR DOD 5220.22-M, NATIONAL INDUSTRIAL

SECURITY PROGRAM OPERATING MANUAL.

UNCLASSIFIED LIMITED DOCUMENTS, (e.g., FOUO, DISTRIBUTION STATEMENT CONTROL), DESTROY BY

ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

DRAFTER 1/1/1999

1/1/1999CHECKERCHECKER

ENGINEER

M. Denny

MK 68 MOD 1PROJECT

CLASSIFICATION OF

CRITICAL

MAJOR

WASHINGTON NAVY YARD DC 20376-0005

NAVAL SEA SYSTEMS COMMAND

DEPARTMENT OF THE NAVY

1 53711-8905629-1

2.362 REF

1.536 REF

SCALE 1 : 1

INTERPRET DRAWING IN ACCORDANCE WITH ASME Y14.100-2004, APPENDIX B THRU E.1.

ITAR COMPLIANCE REQUIRED.2.

APPLICABLE STANDARD/SPECIFICATIONS/CLASSES:3.

IPC-J-STD-001, MANUFACTURE OF ASSEMBLY, CLASS 3

IPC-A-610, MANUFACTURE OF ASSEMBLY, CLASS 3

IN CASE OF CONFLICT BETWEEN IPC-J-STD-001 AND IPC-A-610, IPC-J-STD-001 SHALL PREVAIL.

PROCESSING AND CLEANLINESS OF CCA SHALL BE IAW THE APPLICABLE PERFORMANCE SPEC AND 4.

THE FOLLOWING:

SOLDER USING Sn63Pb37 SOLDER, FIND NO. 34, IAW IPC/EIA J-STD-006.A.

SOLDERING, PART MOUNTING, AND LEAD FORMING SHALL BE IAW THE APPLICABLE B.

SPECIFICATION(S) AND CLASS LISTED IN NOTE 3.

CAUTION: THIS IS AN ELECTROSTATIC SENSITIVE UNIT. ELECTROSTATIC DISCHARGE CONTROL PROGRAM 5.

FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES, AND EQUIPMENT SHALL BE

IAW MIL-STD-1686, CLASS I AND MIL-HDBK-263.

MARKING:6.

MARK CCA REVISION AND SERIAL NUMBER. MANUFACTURER HAS OPTION TO USE DIRECT MARKING 1.

OR PERMANENT LABEL METHODS. MARKINGS MAY INCLUDE BAR CODE OR DATA MATRIX SYMBOL.

PROCURING AGENCY SHALL PROVIDE SERIAL NUMBERS.2.

MINIMUM CHARACTER HEIGHT SHALL BE 0.060 (4.32 POINTS).3.

LOCATE ON CCA WHERE SPACE PERMITS.4.

QUALITY ASSURANCE REQUIREMENTS:7.

ASSEMBLIES DELIVERED TO THIS DOCUMENT SHALL CONFORM TO QUALITY ASSURANCE PROVISIONS 1.

IAW THE APPLICABLE SPECIFICATION(S) AND CLASS LISTED IN NOTE 3.

ASSEMBLIES SHALL BE VISUALLY EXAMINED AND MEASURED TO VERIFY TOTAL CONFORMANCE WITH 2.

REQUIREMENTS AS SPECIFIED HEREIN.

MANUFACTURER IS RESPONSIBLE FOR PERFORMANCE OF ALL INSPECTION REQUIREMENTS AS 3.

SPECIFIED HEREIN.

PREPARATION FOR DELIVERY TO PROCURING AGENCY:8.

WHEN SHIPPED, UNIT SHALL BE PACKED IAW ANSI/ESD S20.20 AND ASTM D3951.1.

UNIT PACKAGE MARKING SHALL INCLUDE CAGE CODE, DRAWING NUMBER, REVISION IDENTIFIER, 2.

AND SERIAL NUMBER IN FORMAT AS FOLLOWS:

8905629

REV X

SER NO X

AND MANUFACTURER'S NAME AND MANUFACTURER'S CAGE CODE.

REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

- CONFIGURATION CONTROL

QTY. FIND

NO. CAGE PART NO. DESCRIPTION MATERIAL SPECIFICATION NOTE

BOM TABLE

1 13 60991 MIC5219-3.6YM5-TR IC REG LINEAR 3.6V 500MA SOT23-5 U4

2 12 5V1P1 MC74VHCT50ADTR2G IC BUFF NON-INVERT 5.5V 14-TSSOP U5, U6

1 11 5V1P1 MBT2222ADW1T1 TRANS 2NPN 40V 600MA SC88/SC70 Q1

3 10 4NTZ8 GRM21BC81D106KE51K CAP CER 10UF 20V X6S 0805 C5, C6, C7

1 9 3KDW2 ABM10-16.000MHZ-D30-T3 CRYSTAL 16.0000MHZ 10PF SMD X1

1 8 12060 DRDC3105E6-7 IC PWR DRIVER BIPOLAR 1:1 SOT26 U7

1 7 06EX9 M83-LMT1M2N27-0000-000 CONN HEADER VERT 27POS 2MM J2

1 6 01295 REF3433MDBVTEP IC VREF SERIESV 0.05% SOT23-6 U9

1 5 01295 OPA2349EA/3K IC CMOS 2 CIRCUIT SOT23-8 U8

1 4 01295 LM2937IMPX-12/NOPB IC REG LIN 12V 500MA SOT-223-4 U2

1 3 53711 9007930 PCB, TIM

REF 2 53711 9007929 SCHEMATIC, TIM

1 53711 8905629-1 CCA, TIM

A A

B B

C C

D D

SIGNATURE AUTHORITY

THIRD ANGLE PROJECTION

INTERPRET DRAWING PER ASME Y14.100

PART SHALL BE FREE OF BURRS

SURFACE ROUGHNESS

DO NOT SCALE THIS DRAWING

INTERPRET DIMENSIONING AND

TOLERENCING PER ASME Y14.5-2018

FRACTIONS

ANGLES

DECIMALS

BROKEN EDGES

FILLETS

TOLERANCES

DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE SPECIFIED

SCALE 2:1

UNIT WT. 0.08 LBS SHEET 1 OF 2

REV

STATUS

REV SH

SH

SH

TITLE

APPLICATION

NEXT ASSY USED ON

REVREV

1/32 1° .X

.XX

.XXX

APPROVED FOR NAVSEA

CCA, TIM

.05

.02

.010

.015 MAX

.015R MAX

8905629 -5371189055858905627

CONTROLLED BY: DEPARTMENT OF NAVY

CONTROLLED BY: PMS 495

CUI CATEGORY: CTI

DISTRIBUTION STATEMENT: D

POC: ERIC GONZALEZ, (202) 781-1560

CUI

CUI

DISTRIBUTION STATEMENT D: DISTRIBUTION

AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND

U.S. DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 11/28/2025. OTHER U.S.

REQUESTS SHALL BE REFERRED TO PEO USC PMS 495.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL

DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC.

2751, et. Seq.) OR THE EXPORT ADMINISTRATION

ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP.

2401 et. seq.). VIOLATIONS OF THESE EXPORT LAWS

ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF

DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE - CLASSIFIED INFORMATION,

DESTROY IN ACCORDANCE WITH THE SECNAV

M-5510.36, DON INFORMATION SECURITY PROGRAM

OR DOD 5220.22-M, NATIONAL INDUSTRIAL

SECURITY PROGRAM OPERATING MANUAL.

UNCLASSIFIED LIMITED DOCUMENTS, (e.g., FOUO, DISTRIBUTION STATEMENT CONTROL), DESTROY BY

ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

DRAFTER

CHECKER

M. WARRELLENGINEER

MINE MK68 MOD1PROJECT

NOTES:

BOTTOM VIEW

TOP VIEW

4.

QTY. FIND

NO. CAGE PART NO. DESCRIPTION MATERIAL SPECIFICATION NOTE

BOM TABLE

AR 34 SN63PB37 SOLDER J-STD-006

1 33 D38999/24WB35SN CONN RCPT FMALE 13POS GOLD CRIMP MIL-DTL-38999 III J1

1 32 S7293 RC0805JR-070RP RES 0 OHM JUMPER - 0805 R10

2 31 S7293 RC0805FR-7W1KL RES 1K OHM 1% 1/4W 0805 R6, R7

1 30 S7293 RC0805FR-07976KL RES 976K OHM 1% 1/8W 0805 R5

2 29 S7293 RC0805FR-0747KL RES 47K OHM 1% 1/8W 0805 R11, R12

1 28 S7293 RC0805FR-072ML RES 2M OHM 1% 1/8W 0805 R4

1 27 S7293 RC0805FR-071M18L RES 1.18M OHM 1% 1/8W 0805 R8

1 26 S7293 RC0805FR-07174KL RES 174K OHM 1% 1/8W 0805 R9

1 25 S7293 RC0805FR-0710KL RES 10K OHM 1% 1/8W 0805 R1

2 24 S7293 RC0805FR-07100KL RES 100K OHM 1% 1/8W 0805 R2, R3

6 23 S7293 CC0805KPX7R9BB104 CAP CER 0.1UF 50V X7R 0805 C1, C2, C3, C14, C15,

C16

2 22 S7293 CC0805JRNPO9BN471 CAP CER 470PF 50V C0G/NPO 0805 C11, C13

2 21 S7293 CC0805JKNPO7BN103 CAP CER 10000PF 16V C0G/NPO 0805 C17, C18

1 20 S7293 AC0805KKX7R9BB105 CAP CER 1UF 50V X7R 0805 C4

2 19 S7293 AC0805KKX7R6BB225 CAP CER 2.2UF 10V X7R 0805 C10, C12

1 18 J2211 TQ2SA-L2-3V RELAY TELECOM DPDT 500MA 3V K1

1 17 88G28 ACPL-224-5X0E OPTOISOLATOR 3KV 2CH TRANS 8-SO K2

13 16 77820 10-497623-335 CONTACT, SOCKET, PCTAIL J1 CONTACTS

1 15 6M0U5 MKL16Z256VLH4 IC MCU 32BIT 256KB FLASH 64LQFP U1

1 14 60991 MIC5219-5.0YM5-TR IC REG LINEAR 5V 500MA SOT23-5 U3

A A

B B

C C

D D

53711 -8905629

TITLE

REV.CAGE CODE DWG. NO.

SHEET 2 OF 2

SCALE 3:1

DISTRIBUTION STATEMENT D: DISTRIBUTION

AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND

U.S. DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 11/28/2025. OTHER U.S.

REQUESTS SHALL BE REFERRED TO PEO USC PMS 495.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL

DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC.

2751, et. Seq.) OR THE EXPORT ADMINISTRATION

ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP.

2401 et. seq.). VIOLATIONS OF THESE EXPORT LAWS

ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF

DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE - CLASSIFIED INFORMATION,

DESTROY IN ACCORDANCE WITH THE SECNAV

M-5510.36, DON INFORMATION SECURITY PROGRAM

OR DOD 5220.22-M, NATIONAL INDUSTRIAL

SECURITY PROGRAM OPERATING MANUAL.

UNCLASSIFIED LIMITED DOCUMENTS, (e.g., FOUO, DISTRIBUTION STATEMENT CONTROL), DESTROY BY

ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CCA, TIM

CLASSIFICATION OF

CRITICAL

MAJOR

WASHINGTON NAVY YARD DC 20376-0005

DEPARTMENT OF THE NAVY

REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

- CONFIGURATION CONTROL

1 1 53711 9007929 SCHEMATIC, TIM

QTY. FIND

NO. CAGE PART NO. DESCRIPTION MATERIAL SPECIFIICATION NOTE

BOM TABLE

A A

B B

C C

D D

SIGNATURE AUTHORITY

THIRD ANGLE PROJECTION

INTERPRET DRAWING PER ASME Y14.100

PART SHALL BE FREE OF BURRS

SURFACE ROUGHNESS

DO NOT SCALE THIS DRAWING

INTERPRET DIMENSIONING AND

TOLERENCING PER ASME Y14.5-2018

FRACTIONS

ANGLES

DECIMALS

BROKEN EDGES

FILLETS

TOLERANCES

DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE SPECIFIED

SCALE 1:1

UNIT WT. LBS SHEET 1 OF 1

REV

STATUS

REV SH

SH

SH

TITLE

APPLICATION

NEXT ASSY USED ON

REVREV

1/32 1° .X

.XX

.XXX

APPROVED FOR NAVSEA

SCHEMATIC, TIM

.05

.02

.010

.015 MAX

.015R MAX

9007929 -5371189055858905627

CONTROLLED BY: DEPARTMENT OF NAVY

CONTROLLED BY: PMS 495

CUI CATEGORY: CTI

DISTRIBUTION STATEMENT: D

POC: ERIC GONZALEZ, (202) 781-1560

CUI

CUI

DISTRIBUTION STATEMENT D: DISTRIBUTION

AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND

U.S. DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 11/28/2025. OTHER U.S.

REQUESTS SHALL BE REFERRED TO PEO USC PMS 495.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL

DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC.

2751, et. Seq.) OR THE EXPORT ADMINISTRATION

ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP.

2401 et. seq.). VIOLATIONS OF THESE EXPORT LAWS

ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF

DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE - CLASSIFIED INFORMATION,

DESTROY IN ACCORDANCE WITH THE SECNAV

M-5510.36, DON INFORMATION SECURITY PROGRAM

OR DOD 5220.22-M, NATIONAL INDUSTRIAL

SECURITY PROGRAM OPERATING MANUAL.

UNCLASSIFIED LIMITED DOCUMENTS, (e.g., FOUO, DISTRIBUTION STATEMENT CONTROL), DESTROY BY

ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

DRAFTER

CHECKER

H. BRYDONENGINEER

H. BRYDON

MINE MK68 MOD1PROJECT

2.3622 REF

CHARACTERISTICS PER

CLASSIFICATION OF

CRITICAL

MAJOR

WASHINGTON NAVY YARD DC 20376-0005

NAVAL SEA SYSTEMS COMMAND

DEPARTMENT OF THE NAVY

BOARD TO BE FABRICATED IN ACCORDANCE WITH IPC-6012.1.

MINIMUM ANNULAR RING ON PLATED THRU HOLES AS SPECIFIED IN IPC-2.

6012.

ALL PRINTED CIRCUIT HOLES TO BE PLATED THROUGH WHERE INDICATED 3.

BY HOLE CHART. DIMENSIONS APPLY AFTER PLATING.

LAYER TO LAYER REGISTRATION WITHIN +/- 0.002 OF LAYER 1.4.

ALL HOLES TO BE WITHIN .003 RADIUS OF TRUE POSITION.5.

CONTINUITY TEST OF FABRICATED BOARD SHALL BE PERFORMED.6.

THIS DRAWING SHALL NOT BE USED FOR FABRICATION OF PRINTED 7.

CIRCUIT BOARDS. PRINTED CIRCUIT BOARDS SHALL BE FABRICATED FROM

STABLE BASE MASTERS OR GERBER FILES. FILES REQUIRED TO FABRICATE

ARE AS FOLLOWS:

9007930_-PTH.drl 9007930_-B_Cu.gbl 9007930_-B_Mask.gbs 9007930_-B_Paste.gbp 9007930_-B_Silkscreen.gbo 9007930_-F_Cu.gtl 9007930_-F_Mask.gts 9007930_-F_Paste.gtp 9007930_-F_Silkscreen.gto 9007930_-In1_Cu.g2 9007930_-In2_Cu.g3 9007930_-In3_Cu.g4 9007930_-In4_Cu.g5 9007930_-NPTH.drl

PCB IS TO HAVE SOLDER MASK BOTH SIDES AND SILK SCREEN BOTH SIDES.8.

SOLDER MASK OVER BARE COPPER (SMOBC) IN ACCORDANCE WITH 9.

IPC-SM-840.

MATERIAL = 0.062 THICK FR-4, 1 OUNCE COPPER IN ACCORDANCE WITH 10.

IPC-4101.

BOARD OUTLINE AND INTERNAL CUTOUTS TOLERANCE: +/- 0.005.11.

DRILL TABLE

HOLE DIA. (INCH) SYMBOL QTY PLATED HOLE DIA. TOL

0.0115 109 YES 0.003

0.0256 27 YES 0.003

0.0276 13 YES 0.003

0.0390 3 NO 0.003

0.0866 2 NO 0.003

REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

- CONFIGURATION CONTROL

A A

B B

C C

D D

SIGNATURE AUTHORITY

THIRD ANGLE PROJECTION

INTERPRET DRAWING PER ASME Y14.100

PART SHALL BE FREE OF BURRS

SURFACE ROUGHNESS

DO NOT SCALE THIS DRAWING

INTERPRET DIMENSIONING AND

TOLERENCING PER ASME Y14.5-2018

FRACTIONS

ANGLES

DECIMALS

BROKEN EDGES

FILLETS

TOLERANCES

DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE SPECIFIED

SCALE 3:1

UNIT WT. 0.02 LBS SHEET 1 OF 1

REV

STATUS

REV SH

SH

SH

TITLE

APPLICATION

NEXT ASSY USED ON

REVREV

1/32 1° .X

.XX

.XXX

APPROVED FOR NAVSEA

PCB, TIM

.05

.02

.010

.015 MAX

.015R MAX

9007930 -537118905585

CONTROLLED BY: DEPARTMENT OF NAVY

CONTROLLED BY: PMS 495

CUI CATEGORY: CTI

DISTRIBUTION STATEMENT: D

POC: ERIC GONZALEZ, (202) 781-1560

CUI

CUI

DISTRIBUTION STATEMENT D: DISTRIBUTION

AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND

U.S. DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 11/28/2025. OTHER U.S.

REQUESTS SHALL BE REFERRED TO PEO USC PMS 495.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL

DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC.

2751, et. Seq.) OR THE EXPORT ADMINISTRATION

ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP.

2401 et. seq.). VIOLATIONS OF THESE EXPORT LAWS

ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF

DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE - CLASSIFIED INFORMATION,

DESTROY IN ACCORDANCE WITH THE SECNAV

M-5510.36, DON INFORMATION SECURITY PROGRAM

OR DOD 5220.22-M, NATIONAL INDUSTRIAL

SECURITY PROGRAM OPERATING MANUAL.

UNCLASSIFIED LIMITED DOCUMENTS, (e.g., FOUO, DISTRIBUTION STATEMENT CONTROL), DESTROY BY

ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

DRAFTER 10/17/2025

10/30/2025L. WISERCHECKER

M. WARRELLENGINEER

J. SCOTT

MINE MK68 MOD1PROJECT

NAVAL SURFACE WARFARE CENTER

4.150 ±0.005

2.64

R1.26

0.825

0.010 0.000

4x R0.19

1.49

8x R0.05

A

A

0.014 M A C M

0.01 A C

0.005 M A

0.014 M A C M

0.014 M A C M

B

C

4x 0.32

4X 0.24 .390+.015 x 82

-.000

3.700

2.200

5°

2X

6°

0.028 M A B M

0.010 M A C M

0.713

0.263

0.450

0.770

0.000 0.010

0.201

0.000 0.010

SECTION A-A

0.005 M C M

0.01 A

A

(M102)

(M101)

(M103)

1 8905628- TIM HOUSING

REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

- INITIAL RELEASE

X 1 53711 8905628 TIM HOUSING 6061-T6

QTY FIND

NO. DAI PART NUMBER DESCRIPTION SPECIFICATION MATERIAL NOTE

THIRD ANGLE PROJECTION

INTERPRET DRAWING PER ASME Y14.100

PART SHALL BE FREE OF BURRS

SURFACE ROUGHNESS

DO NOT SCALE THIS DRAWING

FRACTIONS

ANGLES

DECIMALS

BROKEN EDGES

FILLETS

TOLERANCES

DIMENSIONS ARE IN INCHES

NONE

MAJOR

CRITICAL

DOD-STD-2101

CHARACTERISTICS PER

CLASSIFICATION OF

UNLESS OTHERWISE SPECIFIED

NOTES:

REMOVE BURRS AND BREAK SHARP EDGES .015 MAX.1.

SCALE: NONE

APPROVED

ENGINEER

CHECKER

DRAFTER

1 1

OFUNIT WT. SHEET

WASHINGTON NAVY YARD DC 20376-0005

DEPARTMENT OF THE NAVY

DISTRIBUTION STATEMENT D: DISTRIBUTION

AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND

U.S. DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, NOVEMBER 2024. OTHER U.S.

REQUESTS SHALL BE REFERRED TO PEO USC PMS 495.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL

DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC.

2751, et. Seq.) OR THE EXPORT ADMINISTRATION

ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP.

2401 et. seq.). VIOLATIONS OF THESE EXPORT LAWS

ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF

DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE - CLASSIFIED INFORMATION,

DESTROY IN ACCORDANCE WITH THE SECNAV

M-5510.36, DON INFORMATION SECURITY PROGRAM

OR DOD 5220.22-M, NATIONAL INDUSTRIAL

SECURITY PROGRAM OPERATING MANUAL.

UNCLASSIFIED LIMITED DOCUMENTS, (e.g., FOUO, DISTRIBUTION STATEMENT CONTROL), DESTROY BY

ANY METHOD THAT WILL PREVENT DISCLOSURE OF

REV

STATUS

REV SH

SH

SH

PROJECT TITLE

APPLICATION

NEXT ASSY USED ON

REVREV

1/32 1° .X

.XX

.XXX

APPROVED FOR NAVSEA

TIM HOUSING

.05

.02

.010

.015 MAX

.015R MAX

8905628 -53711

LBS

CDM

DRAFTER

A A

B B

C C

D D

CONTROLLED BY: DEPARTMENT OF NAVY

CONTROLLED BY: PMS 495

CUI CATEGORY: CTI

DISTRIBUTION STATEMENT: D

POC: ERIC GONZALEZ, (202) 781-1560

CLASSIFICATION OF

CRITICAL

MAJOR

WASHINGTON NAVY YARD DC 20376-0005

NAVAL SEA SYSTEMS COMMAND

DEPARTMENT OF THE NAVY

1 53711-8905625-1

2X

52X

27X

3X

8 7

2A

2D

2B

2C

2E

8.

P1

P2

P6

P3

DIMENSIONING, TOLERANCING, AND CONTROL 1.

SYMBOLS PER ASME Y14.5M.

MARK CABLE USING WHITE LABEL TAPE, IN THE 2.

APPROXIMATE LOCATION SHOWN. COVER LABEL TAPE

USING FIND NO 9 (HEAT SHRINK). HEAT SHRINK SHALL

EXTEND .25 LONGER THAN THE LABEL ON EACH END.

MARK LABELS USING THE FOLLOWING INFORMATION IAW

MIL-STD-130:

A. P1 B. P2 C. P3 D. P6 E. 8905625-1

TEST ALL CONNECTIONS FOR CONTINUITY AFTER 3.

ASSEMBLY IN ACCORDANCE WITH THE WIRE CHART.

WORKMANSHIP AND QUALITY INSPECTION PER MIL-4.

HDBK-454, GUIDELINE 9.

ITEM(S) MAY BE PURCHASED FROM LISTED VENDOR OR 5.

DESIGN ACTIVITY APPROVED EQUIVALENT.

INSTALL IAW MANUFACTURER'S INSTRUCTION.6.

NOT SHOWN.7.

JOIN CONNECTOR, FIND NO 2, TO WIRE 12, FIND NO 8, 8.

AND WIRE 13, FIND NO 7, USING SOLDER, FIND NO 12,

IAW J-STD-001. IN ACCORDANCE WITH THE WIRE CHART.

7.

6.5.

6.5.

6.5.

6.5.

6.5.

6.5.

6.5.

6.5.

6.5.

6.5.

REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

- CONFIGURATION CONTROL

QTY. FIND

NO. CAGE PART NO. DESCRIPTION MATERIAL SPECIFICATION NOTE

BOM TABLE

AR 12 SN63PB37 SOLDER J-STD-006

52 11 M39029/58-360 CONTACT,ELEC. CONN. PIN,CRIMP SAE-AS39029/58

2 10 M24308-4-265F CONNECTOR, D-SUBMINIATURE, 26-PIN MIL-DTL-24308 P1/P2

AR 9 M23053/5-107-C TUBING, HEAT SHRINK MIL-DTL-23053

AR 8 M16878/5BFB2 WIRE ELEC,INSULATED, 22 AWG COLOR: RED MIL-W-16878/5

AR 7 M16878/5BFB0 WIRE ELEC,INSULATED, 22 AWG COLOR: BLACK MIL-W-16878/5

AR 6 M16878/5BDB9 WIRE ELEC, INSULATED, 26 AWG COLOR: WHITE MIL-W-16878/5

3 5 28198 MS4016D CONTACT,ELEC. CONN. PIN,SOLDER

1 4 06EX9 M83-LFD1F2N27-0000-000 CONNECTOR P3

27 3 06EX9 M83-0110005 CONTACT,ELEC. CONN. SOCKET,CRIMP

1 2 53711 6665905 CONNECTOR, D-SUBMINIATURE, 3-PIN P6

1 53711 8905630-1 MK 68 MOD 1 TDD ADAPTER HARNESS

SIGNATURE AUTHORITY

THIRD ANGLE PROJECTION

INTERPRET DRAWING PER ASME Y14.100

PART SHALL BE FREE OF BURRS

SURFACE ROUGHNESS

DO NOT SCALE THIS DRAWING

INTERPRET DIMENSIONING AND

TOLERENCING PER ASME Y14.5-2018

FRACTIONS

ANGLES

DECIMALS

BROKEN EDGES

FILLETS

TOLERANCES

DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE SPECIFIED

SCALE 1.25:1

UNIT WT. 0.03 LBS SHEET 1 OF 2

REV

STATUS

REV SH

SH

SH

TITLE

APPLICATION

NEXT ASSY USED ON

REVREV

1/32 1° .X

.XX

.XXX

APPROVED FOR NAVSEA

MK 68 MOD 1 TDD ADAPTER HARNESS

.05

.02

.010

.015 MAX

.015R MAX

5371189055858905627

CONTROLLED BY: DEPARTMENT OF NAVY

CONTROLLED BY: PMS 495

CUI CATEGORY: CTI

DISTRIBUTION STATEMENT: D

POC: ERIC GONZALEZ, (202) 781-1560

CUI

CUI

DISTRIBUTION STATEMENT D: DISTRIBUTION

AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND

U.S. DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 11/28/2025. OTHER U.S.

REQUESTS SHALL BE REFERRED TO PEO USC PMS 495.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL

DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC.

2751, et. Seq.) OR THE EXPORT ADMINISTRATION

ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP.

2401 et. seq.). VIOLATIONS OF THESE EXPORT LAWS

ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF

DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE - CLASSIFIED INFORMATION,

DESTROY IN ACCORDANCE WITH THE SECNAV

M-5510.36, DON INFORMATION SECURITY PROGRAM

OR DOD 5220.22-M, NATIONAL INDUSTRIAL

SECURITY PROGRAM OPERATING MANUAL.

UNCLASSIFIED LIMITED DOCUMENTS, (e.g., FOUO, DISTRIBUTION STATEMENT CONTROL), DESTROY BY

ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

DRAFTER

CHECKER

M. WARRELLENGINEER

MINE MK68 MOD1PROJECT

A A

B B

C C

D D

SIGNATURE AUTHORITY

THIRD ANGLE PROJECTION

INTERPRET DRAWING PER ASME Y14.100

PART SHALL BE FREE OF BURRS

SURFACE ROUGHNESS

DO NOT SCALE THIS DRAWING

INTERPRET DIMENSIONING AND

TOLERENCING PER ASME Y14.5-2018

FRACTIONS

ANGLES

DECIMALS

BROKEN EDGES

FILLETS

TOLERANCES

DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE SPECIFIED

SCALE 1.25:1

UNIT WT. 0.03 LBS SHEET 1 OF 2

REV

STATUS

REV SH

SH

SH

TITLE

APPLICATION

NEXT ASSY USED ON

REVREV

1/32 1° .X

.XX

.XXX

APPROVED FOR NAVSEA

MK 68 MOD 1 TDD ADAPTER HARNESS

.05

.02

.010

.015 MAX

.015R MAX

8905630 -5371189055858905627

CONTROLLED BY: DEPARTMENT OF NAVY

CONTROLLED BY: PMS 495

CUI CATEGORY: CTI

DISTRIBUTION STATEMENT: D

POC: ERIC GONZALEZ, (202) 781-1560

CUI

CUI

DISTRIBUTION STATEMENT D: DISTRIBUTION

AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND

U.S. DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 11/28/2025. OTHER U.S.

REQUESTS SHALL BE REFERRED TO PEO USC PMS 495.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL

DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC.

2751, et. Seq.) OR THE EXPORT ADMINISTRATION

ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP.

2401 et. seq.). VIOLATIONS OF THESE EXPORT LAWS

ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF

DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE - CLASSIFIED INFORMATION,

DESTROY IN ACCORDANCE WITH THE SECNAV

M-5510.36, DON INFORMATION SECURITY PROGRAM

OR DOD 5220.22-M, NATIONAL INDUSTRIAL

SECURITY PROGRAM OPERATING MANUAL.

UNCLASSIFIED LIMITED DOCUMENTS, (e.g., FOUO, DISTRIBUTION STATEMENT CONTROL), DESTROY BY

ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

DRAFTER

CHECKER

ENGINEER

MINE MK68 MOD1PROJECT

125125

WIRE CHART

WIRE NO FROM ELECTRICAL

TERMINATION

LENGTH

.5 TO WIRE

DESIGNATION FIND NO WIRE

COLOR

ELECTRICAL

TERMINATION

1 P3-1 M83-0110005 5.250 P2-21 M16878/5BDB9 6 WHT M39029/58-360

2 P3-4 M83-0110005 5.250 P2-12 M16878/5BDB9 6 WHT M39029/58-360

3 P3-5 M83-0110005 5.250 P2-18 M16878/5BDB9 6 WHT M39029/58-360

4 P3-6 M83-0110005 5.250 P2-19 M16878/5BDB9 6 WHT M39029/58-360

5 P3-7 M83-0110005 5.250 P2-22 M16878/5BDB9 6 WHT M39029/58-360

6 P3-8 M83-0110005 5.250 P1-4 M16878/5BDB9 6 WHT M39029/58-360

7 P3-9 M83-0110005 5.250 P1-13 M16878/5BDB9 6 WHT M39029/58-360

8 P3-10 M83-0110005 5.250 P1-25 M16878/5BDB9 6 WHT M39029/58-360

9 P3-11 M83-0110005 5.250 P1-8 M16878/5BDB9 6 WHT M39029/58-360

10 P3-13 M83-0110005 5.250 P1-16 M16878/5BDB9 6 WHT M39029/58-360

11 P3-18 M83-0110005 5.250 P1-2 M16878/5BDB9 6 WHT M39029/58-360

12 P3-19 M83-0110005 9.000 P6-A3 M16878/5BFB2 8 RED MS4016D

13 P3-20 M83-0110005 9.000 P6-A1 M16878/5BFB0 7 BLK MS4016D

P3-2 M83-0110005

P3-3 M83-0110005

P3-12 M83-0110005

P3-14 M83-0110005

P3-15 M83-0110005

P3-16 M83-0110005

P3-17 M83-0110005

P3-21 M83-0110005

P3-22 M83-0110005

P3-23 M83-0110005

P3-24 M83-0110005

P3-25 M83-0110005

P3-26 M83-0110005

P3-27 M83-0110005

A A

B B

C C

D D

53711 -8905630

TITLE

REV.CAGE CODE DWG. NO.

SHEET 2 OF 2

SCALE 1:1

DISTRIBUTION STATEMENT D: DISTRIBUTION

AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND

U.S. DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 11/28/2025. OTHER U.S.

REQUESTS SHALL BE REFERRED TO PEO USC PMS 495.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL

DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC.

2751, et. Seq.) OR THE EXPORT ADMINISTRATION

ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP.

2401 et. seq.). VIOLATIONS OF THESE EXPORT LAWS

ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF

DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE - CLASSIFIED INFORMATION,

DESTROY IN ACCORDANCE WITH THE SECNAV

M-5510.36, DON INFORMATION SECURITY PROGRAM

OR DOD 5220.22-M, NATIONAL INDUSTRIAL

SECURITY PROGRAM OPERATING MANUAL.

UNCLASSIFIED LIMITED DOCUMENTS, (e.g., FOUO, DISTRIBUTION STATEMENT CONTROL), DESTROY BY

ANY METHOD THAT WILL PREVENT DISCLOSURE OF

MK 68 MOD 1 TDD ADAPTER HARNESS

January 31, 2013 12:41:36 [6665905_01_E]

Page: 1 of 6

January 31, 2013 12:55:55 [6665905_02_D]

Page: 2 of 6

January 31, 2013 12:56:27 [6665905_03_D]

Page: 3 of 6

January 31, 2013 12:56:50 [6665905_04_A]

Page: 4 of 6

January 31, 2013 12:57:17 [6665905_05_A]

Page: 5 of 6

January 31, 2013 12:49:55 [6665905_06_E]

Page: 6 of 6

Page: 1 of 5

Page: 2 of 5

Page: 3 of 5

Page: 4 of 5

Page: 5 of 5