A02- Statement of Work (SOW) 1 yoke rail upgrade and tie replacement.pdf
PDF 111 KB Posted
- Attached to
- 1 Yoke Rail Modernization
- Solicitation number
- W519TC25QA036
About this file
This Statement of Work (SOW) details a comprehensive rail system upgrade for the McAlester Army Ammunition Plant (MCAAP). The project involves replacing approximately 6,000 grade ties and 461 switch ties, upgrading 233 sticks of 80# rail to 115# rail, and improving 4 turnouts. Additional work includes installing new track materials such as lag screws, tie plates, spikes, joint bars, bolts, and rail anchors. The project also encompasses ballast distribution, track raising, lining, and dressing approximately 9,000 feet of track and 8 turnouts, with the goal of modernizing and improving the facility's rail infrastructure.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Yoke Rail Questions and Answers.xlsx | XLSX spreadsheet | |
| B08- Solicitation - W519TC26QA036.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1 YOKE RAIL UPGRADE AND TIE TREPLCEMENT
Statement of Work (SOW)
GENERAL
The purpose of this document is to provide an overview for repairs to the 1 yoke on MCAAP’s rail system. The Statement of Work is outlined below.
SCOPE: McAlester Army Ammunition Plant proposes to furnish labor, equipment, and material to accomplish the following:
PROJECT SUMMARY
Rail Upgrade / Tie Replacement:
1. Ties
a. Replace approximately 6,000 old and defective grade ties with new wooden ties.
b. Replace approximately 461 old and defective switch ties, with new wooden switch ties.
2. Other Track Material (OTM)
a. Install all new lag screws as needed to accommodate upgraded rail.
b. Insall both 115# and 90# tie plates as needed to accommodate upgraded rail.
c. Install tie plugs as needed.
d. Install approximately 40,000 spikes as needed to accommodate rail upgrade and new ties.
e. Install new joint and comp bars as needed to accommodate rail upgrades.
f. Install new bolts as needed to accommodate rail upgrades.
g. Install lag screws as needed.
h. Install rail anchors of varying sizes as needed.
3. Rail
a. Upgrade approximately 233 sticks of existing 80# rail to new, 115# rail.
b. Upgrade all 4 turnouts to new, 115# turnouts.
c. Ensure correct gauge once rail is installed and lubricate and adjust all new turnouts.
4. Tamping and Regulating
a. Distribute approximately 900 ton of #4 angular railroad ballast where needed.
b. Raise, line and dress approximately 9,000 feet of upgraded track.
c. Rails, line and dress 8 turnouts
| 1 yoke rail upgrade and tie treplcement |
| GENERAL |
File details come from the government source that posted it. Updated .