A02 SOW Air Drop Dummies final.docx
DOCX document 43 KB Posted
- Attached to
- Air Drop Dummies "Rumber" Brand Name or Equal Federal contract opportunity
- Solicitation number
- W50S7E-24-Q-0024
- Issued by
- Department of the Army National Guard
About this file
This document contains a Statement of Work (SOW) for air drop dummies and the related federal contract opportunity.
The SOW describes the requirements for "Rumber Combat Offload Pallets" or an equal product, including specifications on quantity, materials, dimensions, and durability. The related federal contract opportunity is a request for quotation (RFQ) for the air drop dummies, with a solicitation number of W50S7E-24-Q-0024. The RFQ is set-aside 100% for small businesses, and quotes are due by August 26, 2024. Evaluation criteria include price, technical acceptability, equipment capabilities, delivery time, and past performance. The contracting agency is the Department of the Army National Guard. Multiple solutions and innovative offerings are encouraged.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| B01 W50S7E24Q0024 Air Drop Dummies.docx | DOCX document | |
| B01 Brand Name or Equal JA Air Drop redacted.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MINNESOTA AIR NATIONAL GUARD
HEADQUARTERS 133RD AIRLIFT WING (AMC)
SAINT PAUL MINNESOTA
14 July 2024
STATEMENT OF WORK
1. Project Title: Air Drop Dummies
| 2. Project Location: | 133d Airlift Wing |
| Minnesota Air National Guard Base | |
| 610 Militia Dr, Saint Paul, MN 55111-4112 |
3. General Scope: This requirement is for air drop dummy weighted loads.
4. Detailed Requirements:
A. Air Drop Dummies salient characteristics:
· “Rumber Combat Offload Pallet” “BRAND NAME OR EQUAL”
· Quantity: 8 each
· Composite Lumber
· Smooth top counter sunk holes
· No tie down rings
· Must be constructed with hardware
· Cushions load
· Forklift tine holes on short side that span all the way through. 2 forklift holes that measure 14-in x 6in each and measure 40 inches from the center of one forklift hole to the center of the second forklift hole.
· Dimensions:
· 1600 - 2000 pounds
· 22 – 26” height
· 56 – 58” wide
· 76 – 80” long
· Durable:
· Will not crack, rot or splinter
· Insect proof
· Impervious to fluids and oils
· UV and water resistant
· Easy to clean
9. Warranty: All materials shall be warranted to be in compliance with this statement of work and to the highest standards of the industry. Minimum warranty of 1 year.
Refer technical questions and information to:
Lt Col Ann Feist Contract Specialist 610 Militia Drive St. Paul, MN 55111 612-713-2626 Ann.feist.1@us.af.mil image1.png
File details come from the government source that posted it. Updated .